De’Longhi ECAM35075 Users manual

De’Longhi Appliances via Seitz, 47 31100 Treviso Italy www.delonghi.com

5713248141_01_0620

ECAM35075

FULLY AUTOMATIC

ESPRESSO AND COFFEE

MACHINE

Instructions for use. Keep these instructions

Visit www.delonghi.com for a list of service

centers near you.

ELECTRIC CHARACTERISTICS

120 V~ 60 H z 1250 W

MACHINE À CAFÉ

Mode d’emploi . Conservez cette notice

Visitez www.delonghi.com pour y voir une liste

des centres de réparation proches de chez vous.

CARACTÉRISTIQUES ÉLECTRIQUES

120 V~ 60 H Z 1250 W

CAFETERA

Repase y guarde estas instrucciones.

Lea cuidadosamente este instructivo antes de

usar su aparato.

Visite www.delonghi.com para ver la lista de

centros de servicios cercanos a usted.

CARACTERISTICAS ELECTRICAS:

120 V~ 60 H Z 1250 W

A12

A13

A6 A7

A10

A19

A11

A16

A22

A21

A20

A14

A15

A17

A18

page 6 page 25 Pàg. 47

B11

B14

B10

B13

B15B12

CONTENTS

1. SAFETY WARNINGS ....................................6

1.1 Symbols used in these instructions ...............6

1.2 Designated use ..............................................6

1.3 User manual ..................................................6

2. INTRODUCTION ..........................................6

2.1 Letters in brackets .........................................6

2.2 Troubleshooting and repairs ..........................6

3. DESCRIPTION.............................................6

3.1 Description of the appliance .........................6

3.2 Description of the touch screen .....................7

3.3 Description of the accessories ........................7

3.4 Description of the milk container ..................7

4. BEFORE USE...............................................7

4.1 Checking the appliance .................................7

4.2 Installing the appliance .................................7

4.3 Connecting the appliance ..............................7

4.4 Setting up the appliance ...............................7

5. TURNING THE MACHINE ON ........................8

6. TURNING THE APPLIANCE OFF ....................8

7. MENU SETTINGS ........................................9

7.1 Language ......................................................9

7.2 Maintenance .................................................9

7.3 Program beverages .......................................9

7.4 Program My beverages..................................9

7.5 General .........................................................9

7.6 Statistics ......................................................10

8. RINSING .................................................. 10

9. MAKING COFFEE .......................................11

9.1 Adjusting the coee grinder ........................11

9.2 Tips for a hotter coee.................................11

9.3 Making automatic recipes using coee beans .

..................................................................11

9.4 Temporarily varying the coee aroma .........12

9.5 Making coee using pre-ground coee .......12

10. TRUEBREW OVER ICE™ COFFEE .................. 13

11. MAKING MILKBASED RECIPES ................. 13

11.1 Filling and attaching the milk container ......13

11.2 Adjusting the amount of froth .....................14

11.3 Making cappuccino and milk-based coees

automatically ..............................................14

11.4 Cleaning the milk container after use .........14

12. “ ” PROGRAMMING AND SELECTING ..

............................................................... 15

13. DELIVERING HOT WATER ..........................15

14. CLEANING................................................ 15

14.1 Cleaning the machine .................................15

14.2 Cleaning the machine's internal circuit .......15

14.3 Cleaning the coee grounds container ........16

14.4 Cleaning the drip tray and condensate tray .16

14.5 Cleaning the inside of the coee machine ...16

14.6 Cleaning the water tank ..............................16

14.7 Cleaning the coee spouts ..........................17

14.8 Cleaning the pre-ground coee funnel .......17

14.9 Cleaning the infuser ....................................17

14.10 Cleaning the milk container ........................17

14.11 Cleaning the hot water nozzle .....................18

15. DESCALING .............................................. 18

16. SETTING WATER HARDNESS ...................... 19

16.1 Measuring water hardness ..........................19

16.2 Setting water hardness ...............................19

17. WATER SOFTENER FILTER .........................19

17.1 Installing the lter ......................................19

17.2 Replacing the lter ......................................20

17.3 Removing the lter .....................................20

18. DISPLAYED MESSAGES ..............................21

19. TROUBLESHOOTING ................................. 23

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following.

• Read all instructions carefully.

• Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom of the

machine.

• Do not touch hot surfaces. Use handles or knobs.

• To protect against re, electrical shock and personal injury, do not immerse cord, plug or appliance in

water or other liquid.

• Keep the appliance out of the reach of children and do not leave appliance unattended while in operation.

• Unplug from the outlet when not in use and before cleaning.

• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged

in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.

• The use of accessory attachments not recommended by the manufacturer may result in re, electrical

shock, or personal injury.

• Do not use outdoors.

• Make sure the power cord does not hang over the edge of the table or counter-top to avoid getting acci-

dentally caught or entangled.

•

Do not place the appliance or its electrical parts on or near electric stoves, cooking surfaces, or gas burners.

• Plug cord into the wall outlet. To disconnect, rst turn machine “o”, then remove plug from wall outlet.

• Do not use the appliance for other than the intended use. This appliance is to be utilized for domestic

use only. The manufacturer declines all responsibility for any damage caused by improper, incorrect, or irresponsible use.

WARNING: To reduce the risk of re or electric shock, do not remove the cover or the exterior of the unit. Don’t attempt to repair or modify the machine, doing so will void the warranty. Repair should be done by authorized service personnel only!

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY

SHORT CORD INSTRUCTIONS

- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a

longer cord.

- Longer, detachable power supply cords or extension cords are available and may be used if care is exer-

cised in their use.

- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating

of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over the counter-top or table top where it can be pulled on by children or tripped over.

- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider

than the other). This plug will t into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

1. SAFETY WARNINGS

1.1 Symbols used in these instructions

Important warnings are identied by these symbols. It is vital to respect these warnings.

Danger!

Failure to observe the warning may result in life threatening injury by electric shock.

Important!

Failure to observe the warning could result in injury or damage to the appliance.

Danger of burns!

Failure to observe the warning could result in scalds or burns.

Please note:

This symbol identies important advice or information for the user.

Danger!

This is an electrical appliance and may cause electric shock. You should therefore follow these safety warnings:

• Never touch the appliance with damp hands or feet.

• Never touch the plug with damp hands.

• Make sure the socket used is freely accessible at all times,

enabling the appliance to be unplugged when necessary.

• Unplug directly from the plug only. Never pull the cord as

you could damage it.

• To disconnect the appliance completely you must unplug it

from the mains socket.

• If the appliance is faulty, do not attempt to repair.

Turn it o, unplug from the mains socket and contact Cus-

tomer Services.

• Before cleaning the appliance, turn it o, unplug from the

mains socket and allow to cool.

Important:

Keep all packaging (plastic bags, polystyrene foam) away from children.

Danger of burns!

This appliance produces hot water and steam may form while it is in operation. Avoid contact with splashes of water or hot steam. When the appliance is in operation, the cup shelf could become very hot.

1.2 Designated use

This appliance is designed and made to prepare coee and heat beverages.

Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper use of the appliance.

1.3 User manual

Read this Instruction for Use carefully before using the appliance. Failure to follow this Instruction for Use may result in burns or damage to the appliance. The manufacturer is not liable for damage deriving from failure to respect this Instruction for Use.

Please note:

Keep this Instruction for Use.

2. INTRODUCTION

Thank you for choosing this fully automatic espresso machine. We hope you enjoy using your new appliance. Take a few minutes to read this Instruction for Use. This will avoid all risks and damage to the appliance.

2.1 Letters in brackets

The letters in brackets refer to the legend in the description of the appliance on pages 2-3.

2.2 Troubleshooting and repairs

In the event of problems, rst try and resolve them by reading the information given in sections “18. Displayed messages” and “19. Troubleshooting”. If this does not resolve the problem or you require further information, you should consult Customer Services by calling the number given on the warranty card.

3. DESCRIPTION

3.1 Description of the appliance

(page 2 - A) A1. Beans container lid A2. Pre-ground coee funnel lid A3. Beans container A4. Pre-ground coee funnel A5. Grinding adjustment dial A6. Cup shelf A7. button: to turn the appliance on and o (standby) A8. Hot water and steam connection nozzle A9. Coee spouts (adjustable height) A10. Condensate tray A11. Coee grounds container A12. Cup tray A13. Drip tray water level indicator A14. Drip tray grille A15. Drip tray A16. Water tank lid A17. Water tank A18. Water softener lter housing

A19. Infuser door A20. Infuser A21. Power cord A22. Main switch

3.2 Description of the touch screen

(page 3 - B )

A number of buttons on the panel have a dual function. This is indicated in brackets in the description.

B1. Display: guides the user in using the appliance. The c urrent

selection is at the center between two dotted lines.

B2. ▼ Selection arrow(“ESC”: when programming beverages,

press to exit without saving the change)

B3. OK: to conrm the selection(During the rst few seconds of

"espresso", "ristretto" or "Lungo" delivery, press for 2 cups)

B4. ▲ Selection arrow(“STOP” - When delivering/program-

ming beverages, press to interrupt/programme)

B5. /ESC: to perform a rinse cycle. (When in the settings menu, it acts as the "ESC" button to exit

from the selected function and go back to the main menu)

B6. : appliance settings menu B7. : aroma selection

Directly selected beverages:

B8.

: Espresso

B9. : TrueBrew Over Ice B10.

: Long B11. : Cappuccino B12. : Latte B13. : Hot Milk

B14. : Select additional beverages available from

the Drink Menu: Lungo, Ristretto, Double Espresso+, Cappuccino+, Cappuccino Mix, Latte Macchiato, Flat White, Espresso Macchiato, 2 Espresso, 2 Ristretto, 2 Lungo, Hot Wate r

B15. : Customize and select recipes from the My

Menu. Beverages on the My Menu are automatically set to default settings, until customized.

(TM)

Coee

3.3 Description of the accessories

(page 3 - C ) C1. Water hardness indicator paper C2. Pre-ground coee measure C3. Descaler C4. Water softener lter (certain models only) C5. Cleaning brush C6. Hot water spout

3.4 Description of the milk container

(page 3 - D ) D1. Froth adjustment and CLEAN dial D2. Milk container lid

D3. Milk container D4. Milk intake tube D5. Frothed milk spout (adjustable)

4. BEFORE USE

4.1 Checking the appliance

After removing the packaging, make sure the product is complete and undamaged and that all accessories (C) are present. Do not use the appliance if it is visibly damaged. Contact De’Longhi Customer Services.

4.2 Installing the appliance

Important!

When you install the appliance, you should respect the following safety warnings:

• The machine gives o heat. After positioning the machine on the worktop, leave a space of at least 1.18 in / 3 cm between the surfaces of the machine and the side and rear walls and at least 5.6 in / 15 cm above the coee maker.

• Water penetrating the machine could cause damage.

Do not place the appliance near taps or sinks.

• The appliance could be damaged if the water it contains freezes.

Do not install the appliance in a room where the tempera-

ture could drop below freezing point.

• Arrange the cord (C7) in such a way that it cannot be damaged by sharp edges or come with contact with hot surfaces (e.g. electric hot plates).

4.3 Connecting the appliance

Important!

Check that the mains power supply voltage corresponds to that indicated on the rating plate on the bottom of the appliance. Connect the appliance to an eciently earthed and correctly installed socket with a minimum current rating of 10A only. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualied professional.

4.4 Setting up the appliance

Please note:

• Coee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coee in the grinder. The machine is, however, guaranteed to be new.

• You should customise water hardness as soon as possible following the instructions in section “16.2 Setting water hardness”.

1. Plug the machine into the mains socket and press the main

switch

(g. 1). Make sure the main switch (A22) at the back

of the appliance is pressed (g. 2);

The following messages will show on the display

2. "Language": press the selection arrow (B2) until the required language is displayed between the two dotted lines, then press OK (B3) to conrm.

3. “Fill tank”: remove the water tank (A17), ll to the MAX line with fresh water (g. 3A), then place back in machine (g. 3B);

(B1)

4. "Insert water spout": Check that the hot water spout (C6) is inserted on the connection nozzle (A8) (g. 4) and place a container holding a minimum of 3.38 oz/100 ml underneath (g. 5);

5. "Water circuit empty, Fill water circuit, Hot

ance delivers hot water from the spout then goes o automatically.

water, Conrm?";

6. Press the OK button to conrm. The appli-

The coee machine is now ready for normal use.

Please note:

• The rst time you use the machine, you need to make 4-5 cappuccinos before it starts to give optimal results.

• To enjoy your coee even more and improve the performance of your appliance, we recommend installing a water softener lter (C4) as described in section “17. Water softener lter”.

5. TURNING THE MACHINE ON

Please note:

Before turning the appliance on, make sure the main switch (A22) on the back of the appliance is pressed (g. 2).

Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, hot water comes out of the coee spouts (A9) and is collected in the drip tray (A15) underneath. Avoid contact with splashes of water.

• To turn the appliance on, press the

button (A7) (g. 6). The message "Heating Please wait" appears on the display (B1).

After heating, the message "Rinsing" is displayed, together with a progress bar which gradually lls as preparation

proceeds. As well as heating

the boiler, the appliance also heats the internal circuits by circulating hot water. The appliance is ready when the message "Select your beverage" is displayed.

6. TURNING THE APPLIANCE OFF

Whenever the machine is turned o after being used to make espresso or coee, it performs an automatic rinse cycle.

Danger of burns!

During rinsing, hot water ows from the coee spouts (A9). Avoid contact with splashes of water.

• To turn the appliance o, press the button (A7) (g.

6);

• The message "Turning o underway Please wait" appears on the display (B1), then the appliance performs a rinse cycle and goes o (standby).

Please note!

If you will not be using the appliance for some time, unplug from the mains socket:

• rst turn the appliance o by pressing the button (g. 6);

• press the main switch (A22) (g. 2).

Important!

Never press the main switch while the appliance is on.

7. MENU SETTINGS

This menu has the following options, each explained in detail in this section.

• Language;

• Maintenance:

- Descale,

- Install lter,

- (if a lter has been installed): Replace lter,

- (if a lter has been installed): Remove lter;

• Prg. beverages;

• Prg. my beverages;

• General:

- Set temperature,

- Water hardness,

- Auto-o,

- Energy saving,

- Beep,

- Default beverages,

- Default values;

• Statistics.

7.1 Language

To modify the language of the display (B1), proceed as follows:

1. Press (B6) to enter the "Settings" menu;

2. Press OK (B3) to select "Language". The available languag- es are displayed;

3. Press the selection arrows (B2 and B4) until the required language is displayed between the two lines;

4. Press OK to conrm;

5. The appliance goes back to the "Settings" menu;

6. Press /ESC (B5) to exit the menu.

7.2 Maintenance

Here you can nd all the maintenance operations required by the appliance over time:

• Descale: For instructions on descaling, see section “15. Descaling”.

• Install lter: For instructions on how to install the lter (C4), see section “17.1 Installing the lter”.

To select the operation you require, proceed as follows:

1. Press (B6) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Maintenance" is displayed between the two lines;

3. Press OK B3 to conrm;

4. Press the selection arrows to display the operation to be performed;

5. Press OK to conrm and perform the operations as de- scribed in the corresponding sections.

7.3 Program beverages

The appliance is set by default to automatically deliver standard quantities. To change these quantities and customise the directly selected beverages and the (B14), proceed as follows:

1. Press (B6) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Prg. beverages" is displayed between the two lines;

3. Press OK (B3) to conrm: the appliance lists the beverages you can customise;

4. Press the selection arrows until the beverage you want to customise is displayed, then press OK to conrm;

5. Beverages with coee: "Program aroma" appears on the display: press the selection arrows (B2 and B4) or (B7) until the required aroma is selected (see section “9.4 Temporarily varying the coee aroma”), then press OK. "Program coee" appears on the display together with a bar which gradually lls as delivery progresses. When the required quantity is reached, press OK;

Cappuccinos and milk-based recipes: after selecting

the aroma, "Program milk" appears on the display together with a bar which gradually lls as milk delivery progresses. When the required quantity is reached, press OK. The appliance then makes the coee. Press OK to interrupt delivery when the required quantity of coee is reached.

Hot water: press OK. Delivery begins: press OK when the

required quantity is reached.

6. "Save parameters?": to save the settings, press OK (other- wise press /ESC - B2 or B5).

7.4 Program My beverages

To customize recipes under the My Menu, follow the procedures described in previous section “ “7.3 Program beverages” by selecting “Prg. my beverages” OR by programing directly under the My Menu by following instructions described in section “12. Programming and selecting”.

7.5 General

Here you can nd the settings to customise the basic functions of the appliance:

1. Press (B6) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "General" is displayed between the two lines;

3. Press OK (B3) to conrm and select the required item with the selection arrows. Then follow the instructions for each setting.

• Set temperature:

To modify the temperature of the water used to make the coee, proceed as follows:

4. Press OK (B3). The current value appears on the display (B1) and the "New" value ashes;

5. Select the new value you want to set using the selection arrows (B2 or B4);

6. When the required value (low, medium, high, maximum) has been selected, press OK.

The display goes back to the previous screen.

• Water hardness:

For instructions on identifying and setting water hardness, see section “16. Setting water hardness”.

• Auto-o (standby):

Auto-o can be set so that the appliance goes o after 15 or 30 minutes, or 1, 2 or 3 hours

4. Press OK. The current value appears on the display (B1) and the "New" value ashes;

5. Select the new value you want to set using the selection arrows (B2 or B4);

6. When the required value (low, medium, high, maximum) has been selected, press OK.

The display goes back to the previous screen.

• Energy saving:

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption. To disable or enable "Energy Saving", proceed as follows:

4. Press OK. The current state ("Enabled" or "Disabled") and the operation to be performed ("Disable?" or "Enable?") is displayed. Press OK to conrm;

5. Press OK to disable or enable the function.

The display goes back to the previous screen.

Please note!

• when the function is enabled, the symbol “ECO” appears on the display.

• When in energy saving mode, a few seconds elapse before the rst coee, cappuccino or milk-based coee is delivered as the appliance must heat up again.

• If the milk container (D) is inserted, "Energy Saving" cannot be activated.

• Beep:

Use this function to enable or disable the beep. Proceed as follows:

4. Press OK. The current state ("Enabled" or "Disabled") and

the operation to be performed ("Disable?" or "Enable?") is displayed. Press OK to conrm;

5. Press OK to disable or enable the function. The display goes back to the previous screen.

• Default beverages:

Use this function to reset the default values for all the beverages, or the individual beverages programmed previously. Select the beverage, then proceed as follows:

Select "All" to reset the aroma and quantity settings to the default values, or select the required beverage, then press OK;

5. The machine will display “Reset?”. To conrm, press OK;

6. The machine will now display “Reset complete” and goes back to previous screen.

To reset another beverage, repeat from point 4 or to exit, press

/ESC (B5).

• Default values:

Use this function to reset all settings of the machine to factory values, keeping only the language option in use. To proceed with the reset, select Default values from the General menu (section “7.5 General”):

4. The “Reset” message will display”. Press OK;

5. The machine will conrm displaying “Reset complete” and it goes back to previous screen.

To exit, press /ESC (B5).

7.6 Statistics

This displays statistics relating to the machine. To display the statistics, proceed as follows:

1. Press (B6) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Statistics" is displayed between the two lines;

3. Press OK (B3): statistics on the appliance are displayed, use the selection arrows to scroll through the items;

4. Press /ESC (B5) to exit.

To go back to the main screen, press /ESC.

8. RINSING

Use this function to deliver hot water from the coee spouts (A9) and hot water spout (C6), if inserted, to clean and heat the appliance’s internal circuit. Place a container with a minimum capacity of 3.38 oz/100ml under the coee and hot water spouts.

Important! Danger of burns.

Do not leave the appliance unattended while hot water is being delivered.

1) To enable this function, press (B5). "RINSING" appears on the display (B1);

2) After a few seconds, hot water is delivered rst from the coee spouts, then from the hot water spout (if inserted). A progress bar is displayed and lls gradually as rinsing proceeds;

3) To interrupt, press the arrow corresponding to "STOP" (B4).

Please note!

• If the appliance is not used for more than 3-4 days, when switched on again, we strongly recommend performing 2/3 rinses before use;

• After cleaning, it is normal for the coee grounds container (A11) to contain water.

9. MAKING COFFEE

9.1 Adjusting the coee grinder

The coee grinder is set by default to prepare coee correctly and should not require regulating initially. However, if after making the rst few coees you nd that the coee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding dial

(A5) (g. 7).

Please note:

The grinding adjustment dial must only be turned when the coee grinder is in operation.

If the coee is delivered too slowly or not at all, turn one click clockwise. For fuller bodied creamier coee, turn one click anticlockwise (do not turn more than one click at a time).

These adjustments will only be evident after at least 2 cups of coee have been delivered. If this adjustment does not obtain the desired result, turn the dial another click.

9.2 Tips for a hotter coee

For hotter coee, you should:

• rinse the machine prior to brewing, press /ESC (B5) (see

section “8. RINSING”);

• warm the cups with hot water using the hot water function

(see section “13. Delivering hot water”);

• increase the coee temperature in the "Settings" menu

(see section “7.5 General”).

9.3 Making automatic recipes using coee beans

Important!

Do not use green, avoured, caramelised or candied coee beans as they could stick to the coee grinder and make it unusable.

1. Fill the container (A3) (g. 8) with coee beans;

8 9

2. Place under the coee spouts (A9):

- 1 cup, if you want to make 1 coee (g. 9);

- 2 cups if you want 2 coees.

3. Lower the spouts as near as possible to the cup. This makes a creamier coee (g. 10);

4. Then select the desired

recipe coee:

Directly selected beverages Recipe Quantity Program-

mable quantity

≃ 40 ml from ≃30

Espresso (B8)

≃ 160 ml from ≃115

Long (B10)

Beverages with coee selectable from the

(B14)

Lungo

Ristretto

≃ 120 ml from ≃80

≃ 30 ml from ≃20

to ≃ 80ml

to ≃250ml

to ≃180ml

to ≃40ml

Default aroma

Double

Espresso+

Coee

2 Espresso

2 Lungo

2 Ristretto

5. Preparation begins. A progress bar appears on the display (B1) and gradually lls as preparation proceeds.

Please note:

• You can prepare 2 cups of RISTRETTO, ESPRESSO or LUNGO coee at the same time by pressing "2X" (B3) during preparation of single beverages (the 2X image is displayed for a few seconds at the start of preparation).

• While the machine is making coee, delivery can be interrupted at any time by pressing the selection arrow corresponding to "STOP" (B4).

• At the end of delivery, to increase the quantity of coee in the cup, just press and hold (within 3 seconds) one of the coee buttons (B8 or B10).

Once the coee has been made, the appliance is ready to make the next beverage.

Please note:

• Various alarm messages could be displayed while using the appliance (ll tank, empty grounds container, etc.). Their meaning is explained in section “18. Displayed messages”.

• For hotter coee, see section “9.2 Tips for a hotter coee”.

• If the coee is delivered a drop at a time, too weak and not creamy enough or too cold, read the tips in section “19. Troubleshooting”.

• To customise the beverages according to personal taste, see sections “7.3 Program beverages” and “7.4 Program My beverages”.

≃ 120 ml from ≃80

to ≃180ml

≃ 180 ml from ≃100

to ≃240ml

≃ 40 ml x 2 cups

≃ 120 ml x 2 cups

≃ 30 ml x 2 cups

9.4 Temporarily varying the coee aroma

To temporarily vary the aroma of the coee in the automatic recipes, press (B7):

AUTO

Custom (if programmed) / Standard

EXTRA LIGHT

MEDIUM

STRONG

X-STRONG

(see “9.5 Making coee using pre-ground coee”)

Please note:

• The variation in aroma is not saved and the next time a beverage is delivered automatically, the appliance selects the default value (

• If a few seconds elapse between temporary customising of the aroma and delivery of the beverage, the aroma returns to the default value (

AUTO).

9.5 Making coee using pre-ground coee

Important!

• Never add pre-ground coee when the machine is o or it could spread through the inside of the machine and damage it. This could damage the appliance.

• Never use more than 1 level measure (C2) or it could damage the inside of the coee machine or block the funnel (A4).

Please note:

If you use pre-ground coee, you can only make one cup of coee at a time.

1. Press the button (B7) repeatedly until "

" appears on the dis-

play (B1).

2. Make sure the funnel is clean, then add one level measure of pre-ground

3. Place a cup under the coee spouts (A9) (g. 9).

4. Then select your required coee:

Directly selected beverages Recipe Quantity

Espresso (B8)

Long (B10)

coee (g. 11).

≃ 40 ml ≃ 160 ml

LIGHT

Beverages with coee selectable from the

(B14)

Lungo

Ristretto

Coee

5. Preparation begins. The beverage selected appears on the display together with a progress bar which gradually lls as preparation proceeds.

Important! Making LONG coee : Halfway through preparation, the message "Add pre-ground coee" appears on the display (B1). Add one level measure of pre-ground coee and press OK (B3).

Please note:

If "Energy Saving" mode is active, you may have to wait a few seconds before the rst coee is delivered.

≃ 120 ml ≃ 30 ml ≃ 180 ml

10. TRUEBREW OVER ICE™ COFFEE

1. Add ice to a large glass about half way full (g. 12), press

the strength selector (B8) to choose a strength (strong or extra strong recommended), and place the glass under the brewing unit;

11. MAKING MILKBASED RECIPES

Please note:

• To avoid milk with poor froth or large bubbles, always clean the milk container lid (D2) and hot water connection nozzle (A8) as described in sections “11.4 Cleaning the milk container after use”, “14.10 Cleaning the milk container” and “14.11 Cleaning the hot water nozzle”.

11.1 Filling and attaching the milk container

1. Remove the lid (D2) (g. 14);

MILK

2. Fill the milk container (D3) with a sucient quantity of milk, not exceeding the MAX level marked on the handle (g. 15). Each mark on the side of the container corresponds to 3.38  oz/ 100 ml of milk;

2. Then, press the TrueBrew Over Ice™ (B9) button to brew the coee (g. 13);

3. Add additional ice to the glass/coee plus any syrup, sweetener or milk desired and enjoy

Important!

Always use glasses resistant to thermal shock.

Recipe Quantity Programmable

quantity

TrueBrew Over Ice coee™ (B9)

≃ 3.38 oz / 100 ml

from ≃ 1.35 oz/ 40 ml to ≃8.11 oz / 240ml

Please note:

• For a denser more even froth, you must use skimmed or partially skimmed milk at refrigerator temperature (about 41°F/ 4°C).

• If "Energy Saving" mode is enabled, you may have to wait a few seconds before the rst cappuccino is delivered.

3. Make sure the milk intake tube (D4) is correctly inserted in the bottom of the milk container lid (g. 16);

16 17

4. Place the lid back on the milk container;

5. Remove the hot water spout (C6) from the connection nozzle (A8) (g. 17);

6. Attach the container to the connection nozzle and push as far as it will go (g. 18). The machine emits a beep (if enabled);

1618 19

7. Place a suciently large cup under the coee spouts (A9) and frothed milk spout (D5). Adjust the length of the milk spout. To move it nearer the cup, simply pull it downwards (g. 19);

8. Follow the instructions below for each function.

11.2 Adjusting the amount of froth

Turn the froth adjustment dial (D1) (g. 20) to adjust the amount of froth on the milk delivered while making cappuccinos and milk-based coees.

Dial position

Description Recommended for…

No froth HOT MILK (not frothed) /

LAT TE

Min. froth LATTE MACCHIATO/

FLAT WHITE

11.3 Making cappuccino and milk-based coees automatically

1. Fill the milk container (D) and attach it as described above;

2. Select the desired beverage:

Directly selected beverages:

•

: CAPPUCCINO (B11)

• : Latte (B12)

• : Hot Milk (B13)

Select by pressing (B14):

• Cappuccino+

• Latte macchiato

• Flat white

• Espresso macchiato;

3. After a few seconds, preparation begins automatically, a

progress bar appears on the display and gradually lls as preparation proceeds;

4. After delivering the milk, the machine automatically

makes the coee (if required by the recipe).

Please note:

• If you want to interrupt preparation during delivery, press

the arrow corresponding to "STOP" (B4).

• Do not leave the milk container out of the refrigerator for

long periods. The warmer the milk (41°F / 5°C is ideal), the poorer the quality of froth produced.

• The beverages can be customised (see sections “7.3 Pro-

gram beverages” and “7.4 Program My beverages”).

11.4 Cleaning the milk container after use

Important! Danger of burns

• When cleaning the internal tubes of the milk container (D),

a little hot water and steam may leak out out of the milk spout (D5). Avoid contact with splashes of water.

"Set dial to CLEAN, ESC to cancel" appears on the display (B1) each time you use a milk function. Clean as described to eliminate all milk residues (or press “

1. Leave the milk container (D) in the machine (you do not

need to empty it);

2. Place a cup or other recipient under the frothed milk spout;

/ESC” (B5) to clean later):

Max. froth CAPPUCCINO/ CAPPUCCI

NO+ / ESPRESSO MACCHIA TO / HOT MILK (frothed)

2221

3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 21). “Cleaning underway” appears on the display, together with a progress bar which gradually lls as the operation proceeds. Cleaning stops automatically;

4. Turn the dial back to one of the froth selections;

5. Remove the milk container and always clean the steam connection nozzle (A8) with a sponge (g. 22).

Please note!

• To prepare a number of cappuccinos or milk-based coees, clean the milk container after you have prepared the last beverage only. In this case, press /ESC (B5) to go back to the main menu.

• The milk container can be kept in the refrigerator.

• In some cases, before cleaning you must wait for the appliance to heat up.

12. “ ” PROGRAMMING AND SELECTING

In you can select beverages customised to your personal tastes. If the beverages have not yet been programmed, the appliance will request the customisation procedure before proceeding with delivery:

1. Press (B15);

2. Press the selection arrows (B2 and B4) until the required beverage is displayed between the two lines;

Unprogrammed beverages:

3. Press OK (B3) to select;

4. Beverages with coee: "Program aroma" appears on the display. Press the selection arrows (B2 and B4) or

(B7) until the required aroma is selected. Press OK.

"Program coee" appears on the display together with a bar which gradually lls as delivery progresses. When the required quantity is reached, press OK.

5. Cappuccinos and milk-based coees: After selecting the aroma, "Program milk" appears on the display together with a bar which gradually lls as milk delivery progresses. When the required quantity is reached, press OK.

6. The appliance then makes the coee. Press OK to interrupt delivery when the required quantity of coee is reached.

7. "Save parameters?": to save the settings, press OK (other- wise press ESC - B2 or B5).

8. "Parameters saved" (or "Parameters not saved"). The appliance is ready for use again.

Programmed beverages:

3. Press OK (B3) to select;

4. Preparation begins according to the previously programmed settings.

Please note:

Two cups of a beverage can only be selected when the corresponding single beverages have been programmed.

13. DELIVERING HOT WATER

Important! Danger of burns.

Never leave the machine unattended while delivering hot water.

1. Make sure the hot water spout (C6) is attached correctly;

2. Place a container under the water spout (as close as possible to avoid splashes) (g. 5);

3. Press (B14) and scroll through the beverages in the menu by pressing the selection arrows (B2 or B4) until "Hot water" is selected;

4. Press OK (B3). A progress bar appears and gradually lls as preparation proceeds;

5. The machine delivers about 8.45  oz / 250 ml of hot water, then delivery stops automatically. To interrupt hot water delivery manually, press the selection arrow corresponding to "STOP" (B4) again.

Please note:

• If "Energy Saving" mode is active, you may have to wait a few seconds before hot water is delivered.

• The quantity of water delivered can be customised (see section “7.3 Program beverages”).

14. CLEANING

14.1 Cleaning the machine

The following parts of the machine must be cleaned regularly:

- the appliance’s internal circuit;

- coee grounds container (A11);

- drip tray (A15) and condensate tray (A10);

- water tank (A17);

- coee spouts (A9);

- pre-ground coee funnel (A4);

- infuser (A20), accessible after opening the infuser door (A19);

- milk container (D);

- hot water/steam connection nozzle (A8);

Important!

• Do not use solvents, abrasive detergents or alcohol to clean the coee machine.

• None of the components of the appliance can be washed in a dishwasher with the exception of the drip tray grille (A14) and milk container (D).

• Do not use metal objects to remove coee deposits as they could scratch metal or plastic surfaces.

14.2 Cleaning the machine's internal circuit

If the appliance is not used for more than 3/4 days, before using it again, we strongly recommend switching it on and:

- performing 2-3 rinse cycles by pressing (B5);

- delivering hot water for a few seconds (section “13. Delivering hot water”).

Please note:

After cleaning, it is normal for the coee grounds container (A11) to contain water.

14.3 Cleaning the coee grounds container

When "Empty grounds container" appears on the display (B1), the grounds container must be emptied and cleaned. The appliance cannot be used to make coee until you have cleaned the grounds container (A11). Even if not full, the empt y grounds container message appears on the display 72 hours after the rst coee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned o with the main switch (A22).

Important! Danger of burns

If you make a number of cappuccinos one after the other, the metal cup tray (A12) becomes hot. Wait for it to cool down before touching it and handle it from the front only.

To clean (with the machine on):

• Remove the drip tray (A15) (g. 23), empty and clean.

• Empty the grounds container (A11) and clean thoroughly to remove all residues left on the bottom. This can be done with the spatula on the brush (C5) provided.

• Check the condensate

Important!

When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container may ll up more than expected and clog the machine.

tray (A10) (red) and empty if necessary.

14.4 Cleaning the

drip tray and condensate tray

Important!

The drip tray (A15) is tted with a level indicator (A13) (red) showing the level of water it contains (g. 24). Before the indicator protrudes from the cup tray (A12), the

drip tray must be emptied

and cleaned otherwise the water may overow the edge and damage the appliance, the surface it rests on or the surrounding area. To remove the drip tray:

1. Remove the drip tray and the coee grounds container (A11) (g. 23);

2. Remove the cup tray (A12) and drip tray grille (A14), then empty the drip tray and grounds container and wash all components;

3. Check the red condensate tray (A10) and empty if necessary;

4. Replace the drip tray complete with grille and grounds container.

14.5 Cleaning the inside of the coee machine

Danger of electric shock!

Before cleaning internal parts, the machine must be turned o (see section “6. Turning the appliance o”) and unplugged from the mains power supply. Never immerse the coee machine in water.

1. Check regularly (about once a month) that the inside of the appliance (accessible after removing the drip tray, A15) is not dirty. If necessary, remove coee deposits with the brush (C5) supplied and a sponge;

2. Remove all the residues

with a vacuum cleaner (g. 25).

14.6 Cleaning the water tank

1. Clean the water tank (A17) regularly (about once a month) and whenever you replace the water softener lter (C4) (if provided) with a damp cloth and a little mild washing up

liquid;

2. Remove the lter (C4) (if present) and rinse with running water;

3. Replace the lter (if

26A

26B

provided), ll the tank with fresh water and replace the tank;

4. (Models with water softener lter only) Deliver about 3.38  oz / 100ml of water.

14.7 Cleaning the coee spouts

3332

1. Clean the coee spouts (A9) regularly with a sponge or cloth (g. 26A);

2. Check that the holes in the coee spouts are not blocked. If necessary, remove coee deposits with a toothpick (g. 26B).

14.8 Cleaning the pre-ground coee funnel

Check regularly (about once a month) that the pre-ground coee funnel (A4) is not blocked. If necessary, remove coee deposits with the brush (C5) supplied.

14.9 Cleaning the infuser

The infuser (A20) must be cleaned at least once a month.

Important!

The infuser may not be extracted when the machine is on.

1. Make sure the machine is correctly turned o (see “6. Turning the appliance o”);

2. Remove the water tank (A17);

3. Open the infuser door (A19) (g. 27) on the right side of the appliance;

Please note:

If the infuser is dicult to insert, before insertion, adapt it to the right size by pressing the two levers (g. 29).

8. Once inserted, make sure the two coloured buttons have snapped out;

9. Close the infuser door;

10. Put the water tank back.

14.10 Cleaning the milk container

Clean the milk container (D) frequently as described below:

1. Remove the lid (D2);

2. Remove the milk spout (D5) and intake tube (D4) (g. 30);

PUSH

4. Press the two coloured release buttons inwards and at the same time pull the infuser outwards (g. 28);

5. Soak the infuser in water for about 5 minutes, then rinse under the tap;

Important!

RINSE WITH WATER ONLY NO WASHING UP LIQUID  NO DISH WASHER Clean the infuser without using soap as it could damage

the infuser.

6. Use the brush (C5) to remove any coee residues lef t in the infuser housing, visible through the infuser door;

7. After cleaning, put back in place the infuser by sliding it onto the internal support, then push the PUSH symbol fully in until it clicks into place;

PUSH

3. Turn the froth adjustment dial (D1) counterclockwise to the "INSERT" position (g. 31) and pull o upwards;

4. Wash all the components thoroughly with hot water and mild soap. All components are dishwasher safe, placing them in the top basket of the dishwasher.

Make sure there are no milk residues on the hollow and

groove under the dial (g. 32). If necessary, scrape the groove with a toothpick;

3332

5. Rinse inside the froth adjustment dial housing with running water (g. 33);

6. Check that the intake tube and milk spout are not clogged with milk residues;

7. Put back in place the dial (in correspondence to the word "INSERT"), spout and milk intake tube;

8. Place the lid back on the milk container (D3).

14.11 Cleaning the hot water nozzle

Each time you prepare milk, clean the connection nozzle (A8) with a sponge to remove milk residues from the gaskets (g. 22).

15. DESCALING

Important!

• Before use descaler, read the instructions and the labelling on the descaler pack.

• You should use De’Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer's warranty.

Descale the machine when the message "Descale, ESC to cancel, OK to descale (∼45 minutes)" appears on the display (B1). To descale immediately, press OK (B3) and follow the instructions from point 6. To descale the appliance later, press ESC (B5). The

symbol on the display reminds you that the appliance needs descaling. To access the descaling menu:

Turn the appliance on and wait until it is ready for use;

2. Press (B6) to enter the "Settings" menu;

3. Press the selection arrows (B2 and B4) until "Maintenance" is

displayed between the two lines. Press OK (B3);

4. Press OK to select "Descale";

5. Conrm? (∼45 minutes)”. Press OK to conrm;

6. "Remove lter": extract the water tank (A17), remove the

water softener lter (C4) (if present) and empty the water tank. Press OK;

A B

7. "Pour descaler and water into tank": Pour the descaler into

the tank up to level A (corresponding to a 61  oz /100 ml

1,8 l

pack) marked on the inner surface of the tank, then add water (1 litre) up to level B (g. 34) and put the water tank back. Press OK;

8. "Empty drip tray": Remove, empty and replace the drip

tray (A15) and grounds container (A11). Press OK;

"Place 1.8L container empty under spouts": Place an empty container with a minimum capacity of 1.8 litres / 61  oz under the hot water spout (C6) and coee spouts (A9) (g.

35). Press OK

Important! Danger of burns

Hot water containing acid ows out of the coee spouts and hot water spout. Take care to avoid contact with splashes of this solution.

10.

"Descaling underway": The descale programme starts and

the descaler liquid comes out of the hot water and coee spouts. A series of rinses and pauses is performed automatically to remove all the scale residues inside the coee

machine; After about 25 minutes, descaling stops. The following messages will appear on the screen:

11. "Rinse tank and ll with water": the appliance is now

ready to rinse with fresh water. Empty the container used

to collect the descaler solution. Extract the water tank,

empty, rinse under running water, ll with fresh water up

to the MAX level and put back in the appliance. Press OK;

12. "Place 61  oz / 1.8L container empty under spouts": place

the container used to collect the descaler solution empty

under the coee spouts and hot water spout (g. 35) and

press OK";

13. "Rinsing Conrm?": press OK;

14. "Rinsing underway": hot water is delivered rst from the

coee spouts, then from the hot water spout;

15. When the water in the tank has run out, empty the con-

tainer used to collect the rinsing water;

16. "Rinse tank and ll with water": extract the water tank and

ll with fresh water up to the MAX level. Press OK;

17. "Insert lter": put the water softener lter (if removed)

back in its housing in the water tank, and replace the tank

in the appliance. Press OK;

18. "Place 1.8L container empty under spouts":

tainer used to collect the descaler solution empty under

the hot water spout. Press OK;

19. "Rinsing Conrm?": press OK.

20. "Rinsing underway".

spout;

21. "Empty drip tray": At the end of the second rinse, remove,

empty and replace the drip tray (A15) and grounds con-

tainer (A11). Press OK;

;

place the con-

Hot water comes out of the hot water

22. "Descale complete": press OK;

23. "Fill tank": empty the container used to collect the rinse water, remove the water tank and ll with fresh water up to the MAX level, then put back in the appliance.

Descaling is complete.

Please note!

• If the descaling cycle is not completed correctly (e.g. no electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container (A11) to contain water;

• If the water tank has not been lled to the MAX level, at the end of descaling, the appliance requests a third rinse to guarantee that the descaler solution has been completely eliminated from the machine's internal circuits.

• The appliance may request descaling cycles at very short intervals. This is normal and due to the appliance’s advanced control system.

16. SETTING WATER HARDNESS

The descale message is displayed after a period of time established according to water hardness level. The machine is set by default for a hardness level of 4. The machine can also be programmed according to the hardness of the mains water in the various regions so that the machine needs to be descaled less often.

16.1 Measuring water hardness

1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1) from its pack (attached to the English instructions);

2. Immerse the paper completely in a glass of water for one second;

3. Remove the paper from the water and shake lightly. After about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. Each square corresponds to one level;

soft water (level 1)

3. Press the selection arrows until "Water hardness" is dis-

played, then press OK;

4. The current selection appears on the display and the new selection ashes. Press the selection arrows until the required new selection is displayed. Press OK.

The new level is saved and the appliance goes back to the "General" menu. Press /ESC (B5) twice to go back to the main screen.

17. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C4). If this is not the case with your model, you are recommended to purchase one from De’Longhi Customer Services. To use the lter correctly, follow the instructions below.

17.1 Installing the lter

1. Remove the lter (C4) from the packaging. The date indicator disk varies according to the lter provided.

2. Turn the date indicator

disk (g. 36) until the next 2 months of use are displayed.

Please note

The lter lasts about two months if the appliance is used normally. If the coee machine is left unused with the lter installed, it will last a maximum of three weeks.

3. To activate the lter, run tap water through the hole in the lter as shown in g. 37 until water comes out of the openings at the side for more than a minute.;

slightly hard water (level 2)

hard water (level 3)

very hard water (level 4)

16.2 Setting water hardness

1. Press (B6) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "General" is

displayed between the two lines. Press OK;

0,5 L

37 38

4. Extract the tank (A17) from the appliance and ll with water;

5. Insert the lter in the water tank and immerse it completely for about ten seconds, sloping it and pressing it lightly to enable the air bubbles to escape (g. 38).

6. Insert the lter in the lter housing (A18) and press as far as it will go (g. 39);

7. Close the tank with the lid (A16) (g. 40), then replace the tank in the machine;

39 40

When you install the lter, you must notify the appliance of its presence.

8. Press (B6) to enter the "Settings" menu;

9. Press the selection arrows (B2 and B4) until "Maintenance" is displayed between the two lines. Press OK;

10. Press the selection arrows until "Install lter" is displayed, then press OK;

11. Conrm?": press OK;

12. "Hot water, Conrm?": Position a container under the hot water spout (C6) (min. capacity: 500 ml), then press OK;

13. The appliance begins hot water delivery and the message "Please wait" is displayed;

14. After the ow of hot water stops, the appliance automatically resets to "Ready for coee" status.

The lter is now active and you can use the coee machine.

5. Press the selection arrows until "Replace lter" is dis-

played, then press OK;

6. Conrm?": press OK;

7. "Hot water, Conrm?": Position a container under the hot

water spout (C6) (min. capacity: 500 ml), then press OK;

8. The appliance begins hot water delivery and the message "Please wait" is displayed;

9. After the ow of hot water stops, the appliance automatically resets to "Ready for coee" status.

The new lter is now active and you can use the coee machine.

Please note!

After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter even if the message has not yet been displayed.

17.3 Removing the lter

If you want to use the appliance without the lter (C4), you must remove it and notify the appliance of its removal. Proceed as follows:

1. Extract the tank (A17) and exhausted lter;

2. Press (B6) to enter the "Settings" menu;

3. Press the selection arrows (B2 and B4) until "Maintenance" is displayed between the two lines. Press OK;

4. Press the selection arrows until "Remove lter" is displayed, then press OK;

5. "Conrm?": press OK to conrm removal. The appliance goes back to the "Maintenance" menu;

Press /ESC (B5) to exit the menu.

Please note!

After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter even if the message has not yet been displayed.

17.2 Replacing the lter

Replace the lter (C4) when "Replace lter, ESC to cancel, OK to replace" appears on the display (B1). To replace immediately, press OK (B3) and follow the instructions from point 8. To replace later, press ESC (B5). The you that the lter needs replacing. To replace the lter, proceed as follows:

1. Extract the tank (A17) and exhausted lter;

2. Take the new lter out of its packet and proceed as illustrated in points 2, 3, 4, 5, 6 and 7 in the previous section;

3. Press (B6) to enter the "Settings" menu;

4. Press the selection arrows (B2 and B4) until "Maintenance" is displayed between the two lines. Press OK;

symbol on the display reminds

+ 49 hidden pages

De’Longhi ECAM35075 Users manual

Specifications and Main Features

Frequently Asked Questions

User Manual