CEMB USA M16 User Manual

INTEGRATED EQUIPMENT

M16

Acceleration transducer

B A L A N C I N G M A C H I N E S

Functioning

ASTD08120

The M16 transducer picks up seismically the absolute vibrations of the
machine by being fitted directly to the vibrating part.

Technical characteristics

Type of measurement : seismic (absolute vibrations)

Dynamic range : ± 50 g - 0.1 Hz ÷ 10.0 Khz (± 3 db)

Direction of vibrations : any

Sensitivity : 100 mV/g

Transverse sensitivity : ‹ 5%

Accuracy : 0,0003 g

Resonance frequency : › 25 Khz

Protection against shocks : ± 7000 g-pk

Power supply : 2 ÷ 20 mA - 18 ÷ 28 V

Outlet impedance : ‹ 100 ohm

Temperature range : - 48°C ÷ + 121°C

External casing material : 316-L stainless steel

Mounting screws : M16 x 1.5

Weight : 20 g

Protection against external
agents : CEI 70-1 standard, IP66 class

Connection : two wires shielded cable

Assembly

Make a threaded hole M16 x 1.5 the surface to be tested.

Maintenance

Zero.

Dimensions, fixture and connections

as per front page drawing.

CEMB S.p.A.
23826 MANDELLO del LARIO
TEL. [phone]
www.cemb.com

e mail: [e-mail]

Div. Strumentazioni Via Risorgimento, 9
Fax [phone]

Div. Garage Viale Costituzione, 28
Tel. [phone]
Fax [phone]
Training Center Viale Costituzione, 28

BB A L A N C I N G M A C H I NES