Canon XC-10 Operating Guide

4K Camcorder

Instruction Manual

PUB. DIE-0470-000A

Important Usage Instructions

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.

Table of Contents Index

Menus

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Canon is an authorized licensee of the CFast 2.0™ trademark, which may be registered in various jurisdictions.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

• Apple, App Store, Mac OS, Final Cut Pro are trademarks of Apple Inc., registered in the U.S. and other countries.

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

• Avid and Media Composer are trademarks or registered trademarks of Avid Technology, Inc. or its subsidiaries in the United States and/or other countries.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi Alliance.

• WPS as used on the camcorder's settings, onscreen displays and in this manual signifies Wi-Fi Protected Setup.

• The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance.

• JavaScript is a trademark or registered trademark of Oracle Corporation, its affiliates or subsidiaries in the United States and other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and noncommercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.

Table of Contents Index

Menus

Highlights of the XC10

The Canon 4K Camcorder XC10 is a highly functional camcorder that is capable of producing outstanding results when recording video at either 4K or HD quality, or taking photos of up to approx. 12 megapixels. The XC10 continues Canon’s lineage of high-performance camcorders with robust features designed to help articulate the discerning professional’s creative expression.

Exceptional Video and Photos

1.0-type CMOS sensor and DIGIC DV 5 image processor

The combination of the XC10’s CMOS sensor and DIGIC DV 5 image processor allows your camcorder to capture videos and photos with low levels of noise, even in dimly-lit shooting situations. Owing to the DIGIC DV 5 image processor, this camcorder boasts remarkable image quality.

4K/HD recording and the XF-AVC video format

The camcorder records 4K video to a CFast card using XF-AVC intra-frame compression while it records HD video to an SD card using XF-AVC Long GOP. You can record 4K video at a maximum of 305 Mbps. The impressive video quality you produce with the XC10 will make it your “go-to” main camera for a multitude of projects. You could even shoot B-roll for projects that use Cinema EOS cameras.

* This indicates the compression method used for each

frame of video. Intra-frame is also suitable for grabbing frames from video and for editing.

Excellent photo quality

You can take photos of up to approx. 12 megapixels (effective pixel count). You will find that the superb photo functionality provide by the XC10 will allow it to be more versatile in your projects, such as taking

photos while you shoot video ( frame from 4K video playback ( even attach an optional EX-series Speedlite for EOS cameras.

39) or grabbing a

106). You can

Operability and Adaptability

Intuitive design

The camcorder is designed for a single operator to access necessary camera functions both efficiently and intuitively. The lens features separate rings for focus and zoom while the articulated touch-screen LCD panel lets you record in low- and high-angle shooting situations. You can use the shooting mode dial to select a mode, from special scene mode to auto to full manual, that best suits how much control

you want over shooting functions (

49).

Depending on your shooting style, you may even want to attach the supplied viewfinder unit to the camcorder ( controller (

Software to help manage recordings

The Canon XF Utility for XF-AVC software and Camera Window software are available as free downloads from Canon’s Web site. Canon XF Utility for XF-AVC allows you to easily save, manage and playback your video clips (A 112) while Camera Window lets you transfer photos to your computer (A 115).

21) or use the supplied remote

35).

Versatile Artistic Expression

Creative recording modes

The camcorder offers a variety of recording modes that you can use to control how your final video or photo will come out. The slow and fast motion recording mode (A 88) can go from slow motion at x1/4 speed up to fast motion at x1200 speed. Prerecording mode (A 89), catches the 5 seconds of video prior to the actual start of recording, which helps ensure that you do not miss the action. You can use interval recording mode (A 90) to take a series of photos at a set interval.

Creating a professional look

You can add a professional feel to your shots by using looks (A 63) to affect image-related settings, such as sharpness and color depth. Use the preinstalled looks or customize them to your preference.

Diverse audio options

The camcorder can record sound as 2-channel linear PCM audio (16-bit/48 kHz). The camcorder’s audio scenes (A 78) are a convenient way to let the camcorder take care of audio options depending on the shooting situation. For more control, you can adjust functions such as the audio recording level (A 79), audio equalizer (A 81) and audio compressor (A 84).

Table of Contents Index

Menus

Advanced Professional Features and Flexibility

Wi-Fi network functions

When you use the Wi-Fi functions (A 117), you can remotely record and play back using a connected Wi-Fi device, such as your smartphone or tablet. You can also use the media server function to view photos on your camcorder’s SD card.

Time code and user bit output

The camcorder generates a time code and adds it to your recordings. In addition, it can output that time code and user bit from the HDMI OUT terminal (A 75). This is useful for situations such as referencing or shooting in a multi-camera setup.

Customization

The camcorder features 3 assignable buttons to which you can assign often-used functions (A 97). The main camera function menu can also be customized so that you can quickly access and adjust functions you find necessary (A 96).

Other Functions

• Assistance functions

Peaking and magnification (A 69) can be helpful when you use manual focus, onscreen markers (A 74) can be very useful to help you frame your video, and zebra patterns (A 74) can give you a reference point to avoid overexposures.

•ND filter

When activated, the built-in ND filter reduces the amount of light by 3 stops, allowing you to better capture your subject in the desired depth of field (A 133).

•Push AF

While the camcorder is in manual focus mode, you can use Push AF to switch the camcorder temporarily to autofocus mode (A 71).

• HD playback from 4K video

When you play back a 4K clip, you can play back an HD-sized area of your choosing (A 106).

• Image stabilization (IS)

In addition to the standard IS function, you can use Dynamic IS, which compensates for camcorder shake while walking and shooting, or Powered IS, which is most effective when you are stationary and zoom in on subjects far away (A 73).

• Support for geotagging

You can use the optional GP-E2 GPS Receiver to add GPS information to your recordings (A 86).

Table of Contents Index

Menus

Tab le of Conten ts

1. Introduction 9

About this Manual 9

Conventions Used in this Manual 9

Supplied Accessories 11 Names of Parts 12

Viewfinder unit 17 RC-6 Remote Controller 17

2. Preparations 18

Charging the Battery Pack 18 Preparing the Camcorder 21

Attaching the Lens Hood 21 Using the Viewfinder Unit 21 Using the LCD Panel 23 Adjusting the Grip 24 Attaching the Shoulder Strap 24 Using a Tripod 24

Basic Operation of the Camcorder 25

Switching Between Movies and Photos 25 Switching Between Recording and Playback 25 Using the Touch Screen 26

Date, Time and Language Settings 27

Setting the Date and Time 27 Changing the Language 28 Changing the Time Zone 28 Using the MENU Button and Joystick 28 Using the FUNC. Menu and Setup Menus 29

Preparing Recording Media 31

Inserting a CFast Card 31 Removing a CFast card 32 Inserting and Removing an SD Card 33 Initializing the Recording Media 33 Recovering Data on a Recording Media 34

Using the Remote Controller 35

Inserting the Battery 35 Activating the Remote Sensor 35 Using the Remote Controller to Operate the

Camcorder 35

3. Recording 37

Recording Video and Taking Photos 37

Preparing to Record 37 Basic Recording 38 Selecting the Photo Size 40 Shooting Continuous Photos (Drive Mode) 40 Remote Operation Using Browser Remote 41 Onscreen Icons and Displays 42 Using the Fan 47

Video Configuration: Resolution (4K/HD), Frame

Rate and Bit Rate 48

Selecting the Resolution (Recording in 4K or

HD) 48

Selecting the Frame Rate and Bit Rate 48

Shooting Modes 49

Setting the Shooting Modes 49 Manual Exposure (n)49 Aperture Priority AE (“)51 Shutter Priority AE (‚)52 Program AE (’)52 Auto (N)52 Special Scene (ƒ)52 Adjusting Shooting Mode Settings 54

Automatic Gain and ISO Limits 56 Exposure 58

Exposure Lock 58 Touch Exposure 58 AE Shift 59

Light Metering Mode 60 White Balance 61 Using Looks 63

Selecting a Pre-installed Look 63 Creating a User-defined Look 64

Zooming 65 Adjusting the Focus 66

Autofocus (AF) Mode 66 Manual Focus (MF) 68 Push AF 71 Detecting and Focusing On Faces (Face Detection

& Tracking) 71

Table of Contents Index

Menus

Image Stabilizer 73 Onscreen Markers and Zebra Patterns 74

Displaying Onscreen Markers 74 Displaying Zebra Patterns 74

Setting the Time Code 75

Selecting the Time Code Mode 75

User Bit 77

Setting the User Bit 77 User Bit Output 77

Recording Audio 78

Using Commercially Available Microphones 78 Audio Scenes (Built-in Microphone) 78 Audio Recording Level 79 Wind Screen (Built-in Microphone) 80 Microphone Attenuator (Built-in Microphone) 81 Audio Equalizer (Built-in Microphone) 81 Microphone Directionality (Built-in

Microphone) 82 Microphone Attenuator (External Microphone) 82 Low Cut Filter (External Microphone) 83 Switching the Input 83 Audio Limiter 83 Audio Compressor 84 Monitoring the Audio with Headphones 84

Colors Bars/Audio Reference Signal 85

Recording Color Bars 85 Recording an Audio Reference Signal 85

Recording GPS Information (Geotagging) 86 Slow & Fast Motion Mode 88 Pre-recording Mode 89 Interval Recording Mode 90 Self Timer 91 Orientation Detection 92 Using an Optional Speedlite Flash 94

Attaching the Speedlite 94 Configuring an Attached Flash 94

4. Customization 96

Customizing the FUNC. Menu 96 Assignable Buttons 97

Using an Assignable Button 98

Saving and Loading Menu Settings 99

Saving Menu Settings to an SD Card 99 Loading Menu Settings from an SD Card 99

5. Playback 100

Playback 100

Playing Back Recordings 100 Changing the Index Screen 100 Onscreen Icons and Displays during

Playback 102 Playback Controls during Clip Playback 104 Playback Controls during Photo Playback 105 Adjusting the Volume 105 Displaying Clip Information 105 Playing an HD-sized Clip from a 4K Clip 106 Capturing Photos from 4K Clips (4K Frame Grab)

and HD Clips 106 Magnifying Photos during Playback 107

Deleting Recordings 108

Deleting Clips and Photos from the Index

Screen 108 Deleting a Clip During Playback Pause 108 Deleting a Photo during Playback 109

6. External Connections 110

Video Output Configuration 110

Recording Video Signal Configuration and Video

Output Configuration 110 Playback Video Configuration and Video Output

Configuration 110

Connecting to an External Monitor 111

Connection Diagram 111

Saving Clips to a Computer 112

Installation 112

Saving Photos to a Computer 115

Installation 115 Connecting the Camcorder to a Computer 115

7. Wi-Fi Functions 117

About the Wi-Fi Functions 117 Wireless Connections Using Wi-Fi 118

Wi-Fi Protected Setup (WPS) 118 Searching for Access Points 119 Manual Setup 121

Viewing and Changing Wi-Fi Settings 122 Browser Remote: Controlling the Camcorder from

a Network Device 124

Setting Up Browser Remote 124 Starting Browser Remote 124

Playback via Browser 128 Media Server 129

Table of Contents Index

Menus

8. Additional Information 130

Menu Options 130

FUNC. Menu 130 Setup Menus 132

Troubleshooting 139

List of Messages 145

Handling Precautions 149

Maintenance/Others 152 Optional Accessories 153 Specifications 155 Reference Tables 158 Index 159

Table of Contents Index

Menus

Introduction

About this Manual

Thank you for purchasing the Canon XC10. Please read this manual carefully before you use the camcorder and retain it for future reference. Should the camcorder fail to operate correctly, refer to

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

• A: Reference page number.

• The following terms are used in this manual. “Screen” refers to the LCD screen. “SD card” refers to an SD, SDHC or SDXC memory card. “Recording media” refers to CFast cards and SD cards.

• Photographs in the manual are simulated pictures taken with a still camera. Some screenshots have been altered to make them easier to read.

• This camcorder uses the same button to record video clips and take photos. In this manual, when you are recording video clips, this button is referred to as the START/STOP button; when you are shooting photos, it is referred to as the PHOTO button.

Tro ub le sh ooti ng

(A 139).

START/STOP (PHOTO) button

Table of Contents Index

Menus

About this Manual

The arrow > is used to abbreviate menu selections. For a detailed explanation on how to use the menus, refer to

Button and Joystick

summary of all available menu options and settings, refer to the appendix (A 130).

Using the MENU

(A 28). For a concise

Menu Options

Operating modes and Format A full icon (like ) indicates that the function described can be used in the operating mode shown or for recordings made in the movie format shown in the icon; an empty icon (like ) indicates that the function cannot be used. For details refer to

Operation of the Camcorder the Resolution (Recording in 4K or HD)

(A 25) and

Basic

Selecting

(A 48).

When a procedure requires selecting an option, the available options are listed within or after the procedure. Brackets [ ] are used to refer to menu options as they are displayed on screen.

The navigation bar at the bottom of the page offers buttons to let you jump quickly to the information you want to find.

Takes you to the table of contents.

Takes you to the summary of menu options and settings.

Takes you to the alphabetical index.

Table of Contents Index

Menus

When a function requires the use of the menu, the quick reference shows the submenus and, when applicable, the default setting for the menu item. The example illustration indicates that you can find the function by selecting the [ System Setup] menu and then the [Fan] menu item.

Supplied Accessories

The following accessories are supplied with the camcorder.

Supplied Accessories

CA-570 Compact Power Adapter

(incl. power cord)

Viewfinder Unit

(incl. viewfinder unit cover)

Shoulder Strap IFC-300PCU/S USB Cable HTC-100/S High Speed HDMI Cable

LP-E6N Battery Pack

(incl. protective cover)

Lens Cap RC-6 Remote Controller

(incl. CR2032 lithium button battery)

Lens Hood

Quick Guide

Table of Contents Index

Menus

Names of Parts

3412

1 Focus ring (A 66) 2Zoom ring (A 65) 3 FOCUS (focus mode) switch (A 66) 4 Shoulder strap mount (A 24) 5 MIC (microphone) terminal (A 78) 6HDMI OUT terminal (A 111) 7USB terminal (A 86, 115)

11910

8DC IN terminal (A 18) 9 DISP. (display) button (A 46)/

Assignable button 1 (A 97)

10 PUSH AF (momentary autofocus) button (A 71)/

Assignable button 2 (A 97)

11 Exhaust ventilation outlet (A 47)

Table of Contents Index

Menus

12 3

Names of Parts

1 Air intake vent (A 47) 2 Shoulder strap mount (A 24)

4 Tally lamp (A 38) 5 Remote sensor (A 35)

3 × (headphone) terminal (A 84)

6Lens hood (A 21)

Table of Contents Index

Menus

Names of Parts

567

1 LCD touch screen (A 23) 2 MAGN. (magnification) button (A 69)/

Assignable button 3 (A 97) 3 MENU button (A 28) 4Joystick (A 28) 5 ACCESS indicator (A 31)

8910

6 CARD OPEN (open recording media slot cover)

lever (A 31)

7 Recording media slot cover 8 CFast card slot (A 31) 9SD card slot (A 31) 10 CFast card release button (A 31)

Table of Contents Index

Menus

Names of Parts

1 Built-in microphone (A 78) 2 Accessory shoe (A 86, 94): For attaching the

optional GP-E2 GPS Receiver or optional EXseries Speedlite for EOS cameras.

3 ON/OFF button (A 27) 4START/STOP button (A 37)/PHOTO button

(A 37): When you are recording video clips, this button is referred to in this manual as the START/ STOP button; when you are shooting photos, it is referred to as the PHOTO button.

5 Movie/photo switch (A 25) 6 Control dial (A 49) 7 ^ (playback) button (A 100) 8 POWER/CHG (power/battery charging) indicator

(A 18) 9 Shooting mode dial (A 49) 10 Shooting mode dial button (A 49) 11 Built-in speaker (A 105)

Table of Contents Index

Menus

Names of Parts

1 Battery compartment 2 Battery release latch (A 18) 3 BATT. OPEN (open battery compartment) switch

(A 18)

4 Battery compartment cover (A 18) 5 Lens hood mount index (A 21) 6 Tripod socket (A 24)

Table of Contents Index

Menus

Viewfinder unit

Names of Parts

1 Viewfinder unit latch (A 21) 2Eye cup

RC-6 Remote Controller

123

3 Dioptric adjustment lever (A 22)

4 Delay switch (A 35) 5 Battery compartment cover

Table of Contents Index

6 Transmit button

Menus

Preparations

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the compact power adapter. The first time you use the camcorder, charge the battery pack. For approximate charging times and recording/playback times with a fully charged battery pack, refer to

Playback Times

1 Connect the power cord to the compact power adapter.

2 Plug the power cord into a power outlet.

3 Connect the compact power adapter to the camcorder’s

DC IN terminal.

(A 158).

Recording and

햳

햲

4 Slide the BATT. OPEN switch in the direction of the arrow

and open the battery compartment cover.

5 Insert the battery pack all the way into the compartment as

shown in the illustration.

• Push it all the way in until the battery release latch secures it in place.

6 Close the battery compartment cover.

• Push the cover until you hear a click. Do not force the cover closed if the battery pack is not correctly inserted.

햴

DC IN terminal

햲

햳

Table of Contents Index

Menus

Charging the Battery Pack

7 Charging will start when the camcorder is turned off.

• If the camcorder was on, the green POWER/CHG indicator will go out when you turn off the camcorder. After a moment, the POWER/CHG indicator will turn on in red (battery pack charging). The red POWER/CHG indicator will go out when the battery pack is fully charged.

• If the indicator flashes, refer to

8 Disconnect the compact power adapter in the order shown

in the illustration.

Troubleshooting

(A 139).

POWER/CHG (battery pack charging) indicator

햲

햳

햴

To remove the battery pack

Open the battery compartment cover and slide the battery release latch in the direction of the arrow so the battery pack springs out. Remove the battery pack and close the cover.

햵

햳

Battery release latch

햴

햲

Table of Contents Index

Menus

Charging the Battery Pack

IMPORTANT

• Turn off the camcorder before connecting or disconnecting the compact power adapter. After you turn off the camcorder, important data is updated on the recording media. Be sure to wait until the green POWER/CHG

indicator goes out.

• When using the AC adapter, do not fix it permanently to one place as this may cause a malfunction.

• Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder.

• To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc.

NOTES

• You cannot charge the optional LP-E6 Battery Pack with the camcorder. Check the bottom label of the battery pack and make sure it is an LP-E6N Battery Pack.

• We recommend charging the battery pack in temperatures between 10 °C and 30 °C. If either the ambient temperature or the battery pack’s temperature is outside the range of approx. 0 °C to 40 °C, charging may take longer than usual or charging may not start.

• The battery pack will be charged only when the camcorder is off.

• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG indicator has gone out before restoring the power supply.

• If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

Model number

Table of Contents Index

Menus

Preparing the Camcorder

This section outlines the basic preparations of the camcorder, such as attaching the viewfinder unit and adjusting the screen and grip.

Attaching the Lens Hood

Attach the lens hood to protect the lens and reduce the amount of stray light that may hit the lens.

Place the lens hood on the front of the lens so that the hood’s lens mount index covers the index on the lens and turn it 90 degrees clockwise until it clicks

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the thread.

(햳).

(햲)

Using the Viewfinder Unit

Attaching the Viewfinder Unit

1 Open the viewfinder unit latch and remove the

viewfinder unit cover.

2 Turn the LCD panel 90 degrees upward.

3 Hook the protrusion on the right side of the viewfinder

unit into the groove under the right side of the LCD panel. Then, lower the viewfinder unit.

햴

햳

햲

햳

Table of Contents Index

Menus

햲

Preparing the Camcorder

4 Hook the viewfinder unit latch under the left side of the

LCD panel and then fasten the latch. Then, return the LCD panel to its original position.

Adjusting the Viewfinder Unit

1 Press the ON/OFF button to turn on the camcorder.

• The POWER/CHG indicator will illuminate.

• If necessary, perform the initial setup (A 27).

2 Adjust the dioptric adjustment lever until the viewfinder unit’s

image is sharp.

햳

햲

햴

Removing the Viewfinder Unit

1 Turn the LCD panel 90 degrees upward.

2 Open the viewfinder unit latch and remove the viewfinder unit

from the camcorder.

• Make sure to open the latch all the way before removing

the unit.

3 Attach the viewfinder unit cover, hook the viewfinder unit

latch to the left side of the cover and then fasten the latch.

Table of Contents Index

Menus

Dioptric adjustment lever

햳

햴

햵

햶

햲

4 Attach the viewfinder unit cover.

Preparing the Camcorder

햲

햳 햴

NOTES

• When you are not using the viewfinder unit, make sure to attach the viewfinder unit cap to the unit.

Using the LCD Panel

Pull out the LCD panel and adjust it to a comfortable viewing angle.

• You can adjust the angle also for high- and low-angle shooting.

NOTES

• About the LCD screen: The screen is produced using extremely high-precision manufacturing techniques, with

more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.

• If the screen appears dim, you can adjust the brightness using the [ System Setup] > [1] >

[LCD Brightness] and [LCD Backlight] settings.

Table of Contents Index

Menus

Preparing the Camcorder

Adjusting the Grip

The grip can be rotated 90 degrees toward or away from the lens to give you a convenient grip angle.

While firmly holding the camcorder, rotate the grip to the desired position.

Attaching the Shoulder Strap

Pass the ends through the strap mounts and adjust the length of the shoulder strap.

IMPORTANT

• Be careful not to drop the camcorder when attaching or adjusting the shoulder strap.

Using a Tripod

You can mount the camcorder on a tripod with a mounting screw of 6.5 mm or smaller. Using tripods with longer mounting screws may cause damage to the camcorder.

6.5 mm

Table of Contents Index

Menus

Basic Operation of the Camcorder

Depending on how you plan to shoot, you may need to switch between shooting video clips and shooting photos. Before you shoot, you can also select a shooting mode, which can give you the freedom of adjusting the camcorder’s camera-related settings or allow you to entrust the settings to the camcorder to varying degrees, depending on the mode. After you finish recording, you can check your recordings by switching the camcorder to playback mode.

Switching Between Movies and Photos

Operating modes:

To shoot video clips, set the movie/photo switch to v; to shoot photos, set it to {.

Setting the Shooting Mode

You can select a shooting mode to match your shooting style.

Operating modes:

While pressing down the shooting mode dial button, turn the shooting mode dial to the desired mode.

• For details on the various shooting modes, refer to

(A 49).

Modes

Shooting

Switching Between Recording and Playback

With a single press of a button, the camcorder can easily switch between recording mode and playback mode. For details on playing back your recordings, refer to

Operating modes:

Hold the ^ button pressed down.

Operating Mode Icons Used in This Manual

This instruction manual uses icons to indicate the recording and playback modes for video clips and photos.

Icon Description

Video clip shooting mode.

Photo shooting mode.

Video clip playback mode

Photo playback mode.

Playback

(A 100).

Table of Contents Index

Menus

Basic Operation of the Camcorder

Using the Touch Screen

The buttons and menu items that appear on the touch screen change dynamically depending on the operating mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your fingertips.

Touc h

Press on an element displayed on the touch screen. Used to start playing back a scene in an index screen, to select a setting from the menus, etc.

Drag

Swipe your finger up and down or left and right across the screen. Used to scroll menus, to browse through index screen pages or to adjust slider controls like the volume. On some screens, you can achieve the same effect by touching the triangle control buttons.

Pinch

Pinch In

Place two fingers on the screen and bring them together. Used when playing back clips and photos. Pinch your fingers in to return to the index screen. Also used during photo playback to zoom out from a photo that has been zoomed in.

Pinch Out

Place two fingers on the screen and move them apart. Used on an index screen during playback. Pinch your fingers out to start playing back the clip. Also used during photo playback to zoom in on the photo.

IMPORTANT

• The camcorder features a capacitive touch screen. In the following cases, you may not be able to perform touch operations correctly.

- Using your fingernails or hard-tipped objects, such as ballpoint pens.

- Operating the touch screen with wet or gloved hands.

- Applying excessive force or forcefully scratching the touch screen.

- Attaching commercially available screen protectors or adhesive film onto the touch screen’s surface.

Table of Contents Index

Menus

Date, Time and Language Settings

Setting the Date and Time

You will need to set the date and time of the camcorder before you can start using it. When the camcorder’s clock is not set, the [Date/Time] screen will appear automatically with the day selected.

Operating modes:

1 Press the ON/OFF button to turn on the camcorder.

• The POWER/CHG indicator will illuminate and the [Date/Time] screen will appear.

2 Touch a field you want to change (year, month, day, hours or

minutes).

• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your selection.

3Touch [Í] or [Î] to change the field as necessary.

• You can also push the joystick (Ý) to change the field.

4 Set the correct date and time by changing all the fields in the

same way.

5 Touch [Y.M.D], [M.D,Y] or [D.M.Y] to select the date format you prefer.

• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your selection.

• In some screens, the date will be displayed in short form (numbers instead of month names or only the day and month), but it will still follow the order you selected.

6 Touch [24H] to use 24-hour clock or leave it unselected to use 12-hour clock (AM/PM).

• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your selection.

7 Touch [OK] to start the clock and close the setup screen.

• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your selection.

NOTES

• You can adjust the date and time later on with the [ System Setup] > [1] > [Date/Time] setting.

• When you do not use the camcorder for about 3 months, the built-in rechargeable lithium battery may discharge completely and the date and time setting may be lost. In such case, recharge the built-in lithium battery (A 151) and set the time zone, date and time again.

• Using the optional GP-E2 GPS Receiver, you can have the camcorder adjust settings automatically according to the UTC date/time information received from the GPS signal (A 86).

Table of Contents Index

Menus

Date, Time and Language Settings

Changing the Language

The default language of the camcorder is English. You can set it to one of 27 languages.

[ System Setup]

Operating modes:

1 Press the MENU button.

2 Open the [Language ] screen.

[ System Setup] > [1] > [Language ]

3 Touch the desired language and then touch [OK].

4Touch [X] to close the menu.

NOTES

• Some buttons, such as [FUNC.] and [MENU], will appear in English regardless of the language selected.

Changing the Time Zone

Change the time zone to match your location. The default setting is Paris. In addition, the camcorder is able to retain the date and time of an additional location. This is convenient when you travel so that you can set the camcorder to match the time of your home location or that of your travel destination.

[Language ]

[English]

[ System Setup]

[Time Zone/DST]

[1]

Operating modes:

1 Press the MENU button.

2 Open the [Time Zone/DST] screen.

[ System Setup] > [1] > [Time Zone/DST]

3Touch ["] to set the home time zone, or [#] to set the time zone of your destination when you are

traveling.

4Touch [Ï] or [Ð] to set the desired time zone. If necessary, touch [$] to adjust for daylight saving

time.

5Touch [X] to close the menu.

[Paris]

Using the MENU Button and Joystick

You can navigate some of the camcorder’s menus and screens using the MENU button and joystick instead of using the touch panel. This is convenient, for example, when the viewfinder unit is attached to the camcorder and you cannot touch the screen.

Table of Contents Index

Menus

Date, Time and Language Settings

Joystick

When making a menu selection, push the joystick (Ý/Þ) to move the orange selection frame in the menu. Then, press the joystick itself to select the menu item indicated by the orange selection frame.

MENU button

Press the button to open the setup menus and then press again to close the menu after adjusting desired settings.

Using the FUNC. Menu and Setup Menus

The camcorder’s functions and settings can be adjusted using the FUNC. menu and setup menus. For details about the available menu options and settings, refer to the appendix navigating the menus is explained using mainly the touch panel controls but they can also be navigated using the joystick and other buttons. The procedure below explains how to use both methods. If necessary, refer back to this section for details on using the joystick.

FUNC. Menu

The FUNC. menu contains camera-related functions, such as shutter speed and aperture, used while shooting. The icons of each function’s current setting appears on both sides of the menu. The left side contains functions used prior to shooting while the right side contains functions that can be used while shooting. You can even change what functions appear on the right side of the FUNC. menu (A 96). Although you can access the various functions using the joystick, some functions will still require touch operations.

Menu Options

(A 130). In this manual,

Operating modes:

To use the touch panel controls

1 Touch [FUNC.].

• The FUNC. menu appears. You can drag your finger up/down to see

more functions.

2 Touch the icon of the desired function.

• Menu items not available appear grayed out.

3 Adjust the function and then touch [X].

• Check the function’s description for details.

To use the joystick

1 Push the joystick (Ý/Þ) to select [FUNC.] and then press the joystick.

• The FUNC. menu appears.

2 Push the joystick (Ý/Þ) to select the icon of the desired function and then press the joystick.

• Menu items not available appear grayed out.

3 Adjust the function. 4 Push the joystick (Ý/Þ) to select [X] and then press the joystick.

• Check the function’s description for details.

Table of Contents Index

Menus

Date, Time and Language Settings

NOTES

• An adjustment dial will appear when adjusting some functions. To use touch panel controls, drag your finger left/right to move the adjustment dial to the desired setting. To use the joystick, first press the joystick itself so

that the position of the current setting is highlighted in orange and then push left/right to adjust the setting.

Setup Menus

Operating modes:

To use touch panel controls

1 and modes only: Touch [FUNC.].

2Touch [MENU].

• Alternatively, you can press the MENU button to open the setup

menus directly.

• The setup menus appear. Settings are divided into groups, which can

be accessed through the tabs at the top of the screen.

3 Touch the tab of the desired menu.

• Depending on the operating mode, some tabs may be divided into multiple “pages”. Touch the numbers

under the tab icons or drag your finger left/right to switch to other pages in the currently selected tab.

4 Touch the desired setting.

• Menu items not available appear grayed out.

5 Touch the desired option and then touch [X].

• You can touch [X] to close the menu at any time.

• You can touch [K] to return to the previous screen. If you changed a setting, it will be applied.

To use the joystick

1 and modes only: Push the joystick (Ý/Þ) to select [FUNC.] and then press the joystick. 2 Push the joystick (Ý/Þ) to select [MENU] and then press the joystick.

• Alternatively, you can press the MENU button to open the setup menus directly.

• The setup menus appear. Settings are divided into groups, which can be accessed through the tabs at the

top of the screen.

3 Push the joystick (Þ) to select the desired tab and page number.

• Depending on the operating mode, some tabs may be divided into multiple “pages”. Touch the numbers

under the tab icons or drag your finger left/right to switch to other pages in the currently selected tab.

4 Push the joystick (Ý) to move the selection bar to the desired setting and then press the joystick.

• Menu items not available appear grayed out.

5 Push the joystick (Ý/Þ) to select the desired option and then press the joystick. 6 Push the joystick (Ý/Þ) to select [X] and then press the joystick.

• You can press the MENU button to close the menu at any time.

• You can select [K] to return to the previous screen. If you changed a setting, it will be applied.

NOTES

• For brevity’s sake, references in the text to settings in the setup menus will include only the tab of the desired menu and the setting name. For example, “You can adjust the date and time later on with the [ System Setup] > [1] > [Date/Time] setting.”

• Depending on the operating mode, you may need to switch pages under the tab to access the function.

Table of Contents Index

Menus

+ 131 hidden pages