TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be
contrary to copyright laws.
Table of ContentsIndex
Menus
Trademark Acknowledgements
• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
• Canon is an authorized licensee of the CFast 2.0™ trademark, which may be registered in various
jurisdictions.
• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, App Store, Mac OS, Final Cut Pro are trademarks of Apple Inc., registered in the U.S. and other
countries.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• Avid and Media Composer are trademarks or registered trademarks of Avid Technology, Inc. or its
subsidiaries in the United States and/or other countries.
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi Alliance.
• WPS as used on the camcorder's settings, onscreen displays and in this manual signifies Wi-Fi Protected
Setup.
• The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance.
• JavaScript is a trademark or registered trademark of Oracle Corporation, its affiliates or subsidiaries in the
United States and other countries.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
• Other names and products not mentioned above may be trademarks or registered trademarks of their
respective companies.
• This device incorporates exFAT technology licensed from Microsoft.
• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4
compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and
noncommercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4
compliant video. No license is granted or implied for any other use for MPEG-4 standard.
3
Table of ContentsIndex
Menus
Highlights of the XC10
The Canon 4K Camcorder XC10 is a highly functional camcorder that is capable of producing outstanding
results when recording video at either 4K or HD quality, or taking photos of up to approx. 12 megapixels. The
XC10 continues Canon’s lineage of high-performance camcorders with robust features designed to help
articulate the discerning professional’s creative expression.
4
Exceptional Video and Photos
1.0-in. CMOS sensor and DIGIC DV 5 image
processor
The combination of the XC10’s CMOS sensor and
DIGIC DV 5 image processor allows your camcorder
to capture videos and photos with low levels of
noise, even in dimly-lit shooting situations. Owing to
the DIGIC DV 5 image processor, this camcorder
boasts remarkable image quality.
4K/HD recording and the XF-AVC video format
The camcorder records 4K video to a CFast card
using XF-AVC intra-frame compression while it
records HD video to an SD card using XF-AVC Long
GOP. You can record 4K video at a maximum of 305
Mbps. The impressive video quality you produce
with the XC10 will make it your “go-to” main camera
for a multitude of projects. You could even shoot
B-roll for projects that use Cinema EOS cameras.
* This indicates the compression method used for each
frame of video. Intra-frame is also suitable for grabbing
frames from video and for editing.
Excellent photo quality
You can take photos of up to approx. 12 megapixels
(effective pixel count). You will find that the superb
photo functionality provide by the XC10 will allow it to
be more versatile in your projects, such as taking
A
photos while you shoot video (
frame from 4K video playback (
even attach an optional EX-series Speedlite for EOS
cameras.
39) or grabbing a
A
106). You can
Operability and Adaptability
Intuitive design
The camcorder is designed for a single operator to
access necessary camera functions both efficiently
and intuitively. The lens features separate rings for
focus and zoom while the articulated touch-screen
LCD panel lets you record in low- and high-angle
shooting situations. You can use the shooting mode
dial to select a mode, from special scene mode to
auto to full manual, that best suits how much control
A
you want over shooting functions (
49).
Depending on your shooting style, you may even
want to attach the supplied viewfinder unit to the
camcorder (
controller (
Software to help manage recordings
The Canon XF Utility for XF-AVC software and
Camera Window software are available as free
downloads from Canon’s Web site. Canon XF Utility
for XF-AVC allows you to easily save, manage and
playback your video clips (A 113) while Camera
Window lets you transfer photos to your computer
(A 116).
A
21) or use the supplied remote
A
35).
Versatile Artistic Expression
Creative recording modes
The camcorder offers a variety of recording modes
that you can use to control how your final video or
photo will come out. The slow and fast motion
recording mode (A 88) can go from slow motion at
x1/4 speed up to fast motion at x1200 speed. Prerecording mode (A 89), catches the 5 seconds of
video prior to the actual start of recording, which
helps ensure that you do not miss the action. You
can use interval recording mode (A 90) to take a
series of photos at a set interval.
Creating a professional look
You can add a professional feel to your shots by
using looks (A 63) to affect image-related settings,
such as sharpness and color depth. Use the preinstalled looks or customize them to your
preference.
Diverse audio options
The camcorder can record sound as 2-channel
linear PCM audio (16-bit/48 kHz). The camcorder’s
audio scenes (A 78) are a convenient way to let
the camcorder take care of audio options depending
on the shooting situation. For more control, you can
adjust functions such as the audio recording level
(A 79), audio equalizer (A 81) and audio
compressor (A 84).
Table of ContentsIndex
Menus
Advanced Professional Features and
Flexibility
Wi-Fi network functions
When you use the Wi-Fi functions (A 118), you can
remotely record and play back using a connected
Wi-Fi device, such as your smartphone or tablet.
You can also use the media server function to view
photos on your camcorder’s SD card.
Time code and user bit output
The camcorder generates a time code and adds it
to your recordings. In addition, it can output that
time code and user bit from the HDMI OUT terminal
(A 75). This is useful for situations such as
referencing or shooting in a multi-camera setup.
Customization
The camcorder features 3 assignable buttons to
which you can assign often-used functions (A 97).
The main camera function menu can also be
customized so that you can quickly access and
adjust functions you find necessary (A 96).
Other Functions
• Assistance functions
Peaking and magnification (A 69) can be helpful
when you use manual focus, onscreen markers
(A 74) can be very useful to help you frame your
video, and zebra patterns (A 74) can give you a
reference point to avoid overexposures.
•ND filter
When activated, the built-in ND filter reduces the
amount of light by 3 stops, allowing you to better
capture your subject in the desired depth of field
(A 134).
•Push AF
While the camcorder is in manual focus mode,
you can use Push AF to switch the camcorder
temporarily to autofocus mode (A 71).
• HD playback from 4K video
When you play back a 4K clip, you can play back
an HD-sized area of your choosing (A 106).
• Image stabilization (IS)
In addition to the standard IS function, you can
use Dynamic IS, which compensates for
camcorder shake while walking and shooting, or
Powered IS, which is most effective when you are
stationary and zoom in on subjects far away
(A 73).
• Support for geotagging
You can use the optional GP-E2 GPS Receiver to
add GPS information to your recordings (A 86).
5
Table of ContentsIndex
Menus
Tab le of Conten ts
6
1. Introduction 9
About this Manual 9
Conventions Used in this Manual 9
Supplied Accessories 11
Names of Parts 12
Viewfinder unit 17
RC-6 Remote Controller 17
2. Preparations 18
Charging the Battery Pack 18
Preparing the Camcorder 21
Attaching the Lens Hood 21
Using the Viewfinder Unit 21
Using the LCD Panel 23
Adjusting the Grip 24
Attaching the Shoulder Strap 24
Using a Tripod 24
Basic Operation of the Camcorder 25
Switching Between Movies and Photos 25
Switching Between Recording and Playback 25
Using the Touch Screen 26
Date, Time and Language Settings 27
Setting the Date and Time 27
Changing the Language 28
Changing the Time Zone 28
Using the MENU Button and Joystick 28
Using the FUNC. Menu and Setup Menus 29
Preparing Recording Media 31
Inserting a CFast Card 31
Removing a CFast card 32
Inserting and Removing an SD Card 33
Initializing the Recording Media 33
Recovering Data on a Recording Media 34
Using the Remote Controller 35
Inserting the Battery 35
Activating the Remote Sensor 35
Using the Remote Controller to Operate the
Camcorder 35
3. Recording 37
Recording Video and Taking Photos 37
Preparing to Record 37
Basic Recording 38
Selecting the Photo Size 40
Shooting Continuous Photos (Drive Mode) 40
Remote Operation Using Browser Remote 41
Onscreen Icons and Displays 42
Using the Fan 47
Video Configuration: Resolution (4K/HD), Frame
Rate and Bit Rate 48
Selecting the Resolution (Recording in 4K or
HD) 48
Selecting the Frame Rate and Bit Rate 48
Shooting Modes 49
Setting the Shooting Modes 49
Manual Exposure (n)49
Aperture Priority AE (“)51
Shutter Priority AE (‚)52
Program AE (’)52
Auto (N)52
Special Scene (ƒ)52
Adjusting Shooting Mode Settings 54
Automatic Gain and ISO Limits 56
Exposure 58
Exposure Lock 58
Touch Exposure 58
AE Shift 59
Light Metering Mode 60
White Balance 61
Using Looks 63
Selecting a Pre-installed Look 63
Creating a User-defined Look 64
Zooming 65
Adjusting the Focus 66
Autofocus (AF) Mode 66
Manual Focus (MF) 68
Push AF 71
Detecting and Focusing On Faces (Face Detection
& Tracking) 71
Table of ContentsIndex
Menus
Image Stabilizer 73
Onscreen Markers and Zebra Patterns 74
Microphone) 82
Microphone Attenuator (External Microphone) 82
Low Cut Filter (External Microphone) 83
Switching the Input 83
Audio Limiter 83
Audio Compressor 84
Monitoring the Audio with Headphones 84
Colors Bars/Audio Reference Signal 85
Recording Color Bars 85
Recording an Audio Reference Signal 85
Recording GPS Information (Geotagging) 86
Slow & Fast Motion Mode 88
Pre-recording Mode 89
Interval Recording Mode 90
Self Timer 91
Orientation Detection 92
Using an Optional Speedlite Flash 94
Attaching the Speedlite 94
Configuring an Attached Flash 94
4. Customization 96
Customizing the FUNC. Menu 96
Assignable Buttons 97
Using an Assignable Button 98
Saving and Loading Menu Settings 99
Saving Menu Settings to an SD Card 99
Loading Menu Settings from an SD Card 99
5. Playback 100
Playback 100
Playing Back Recordings 100
Changing the Index Screen 100
Onscreen Icons and Displays during
Playback 102
Playback Controls during Clip Playback 104
Playback Controls during Photo Playback 105
Adjusting the Volume 105
Displaying Clip Information 105
Playing an HD-sized Clip from a 4K Clip 106
Capturing Photos from 4K Clips (4K Frame Grab)
and HD Clips 106
Magnifying Photos during Playback 107
Deleting Recordings 108
Deleting Clips and Photos from the Index
Screen 108
Deleting a Clip During Playback Pause 108
Deleting a Photo during Playback 109
6. External Connections 110
Video Output Configuration 110
Recording Video Signal Configuration and Video
Output Configuration 110
Playback Video Configuration and Video Output
Configuration 111
Connecting to an External Monitor 112
Connection Diagram 112
Saving Clips to a Computer 113
Installation 113
Saving Photos to a Computer 116
Installation 116
Connecting the Camcorder to a Computer 116
7. Wi-Fi Functions 118
About the Wi-Fi Functions 118
Wireless Connections Using Wi-Fi 119
Thank you for purchasing the Canon XC10. Please read this manual carefully before you use the camcorder and
retain it for future reference. Should the camcorder fail to operate correctly, refer to
Conventions Used in this Manual
•IMPORTANT: Precautions related to the camcorder’s operation.
•NOTES: Additional topics that complement the basic operating procedures.
• A: Reference page number.
• The following terms are used in this manual.
“Screen” refers to the LCD screen.
“SD card” refers to an SD, SDHC or SDXC memory card.
“Recording media” refers to CFast cards and SD cards.
• Photographs in the manual are simulated pictures taken with a still camera. Some screenshots have been
altered to make them easier to read.
• This camcorder uses the same button to record video clips and take photos. In this manual, when you are
recording video clips, this button is referred to as the START/STOP button; when you are shooting photos, it is
referred to as the PHOTO button.
Tro ub le sh ooti ng
(A 140).
9
START/STOP (PHOTO) button
Table of ContentsIndex
Menus
About this Manual
10
The arrow > is used to abbreviate menu
selections. For a detailed explanation on how
to use the menus, refer to
Button and Joystick
summary of all available menu options and
settings, refer to the appendix
(A 131).
Using the MENU
(A 28). For a concise
Menu Options
Operating modes and Format
A full icon (like ) indicates that the function
described can be used in the operating mode shown
or for recordings made in the movie format shown in
the icon; an empty icon (like ) indicates that the
function cannot be used. For details refer to
Operation of the Camcorder
the Resolution (Recording in 4K or HD)
(A 25) and
Basic
Selecting
(A 48).
When a procedure requires selecting an option,
the available options are listed within or after the
procedure. Brackets [ ] are used to refer to menu
options as they are displayed on screen.
The navigation bar at the bottom of the page offers buttons to
let you jump quickly to the information you want to find.
Takes you to the table of contents.
Takes you to the summary of menu options and settings.
Takes you to the alphabetical index.
Table of ContentsIndex
Menus
When a function requires the use of the
menu, the quick reference shows the
submenus and, when applicable, the
default setting for the menu item. The
example illustration indicates that you
can find the function by selecting the
[ System Setup] menu and then the
[Fan] menu item.
Supplied Accessories
The following accessories are supplied with the camcorder.
Supplied Accessories
11
CA-570 Compact Power Adapter
(incl. power cord)
Viewfinder Unit
(incl. viewfinder unit cover)
Shoulder StrapIFC-300PCU/S USB CableHTC-100/S High Speed HDMI Cable
LP-E6N Battery Pack
(incl. protective cover)
Lens CapRC-6 Remote Controller
(incl. CR2032 lithium button battery)
Lens Hood
Quick Guide
Table of ContentsIndex
Menus
Names of Parts
Names of Parts
12
3412
5
6
7
8
1 Focus ring (A 66)
2Zoom ring (A 65)
3 FOCUS (focus mode) switch (A 66)
4 Shoulder strap mount (A 24)
5 MIC (microphone) terminal (A 78)
6HDMI OUT terminal (A 112)
7USB terminal (A 86, 116)
11910
8DC IN terminal (A 18)
9 DISP. (display) button (A 46)/
Assignable button 1 (A 97)
10 PUSH AF (momentary autofocus) button (A 71)/
Assignable button 2 (A 97)
11 Exhaust ventilation outlet (A 47)
Table of ContentsIndex
Menus
123
Names of Parts
13
1 Air intake vent (A 47)
2 Shoulder strap mount (A 24)
4
5
4 Tally lamp (A 38)
5 Remote sensor (A 35)
3 × (headphone) terminal (A 84)
6
6Lens hood (A 21)
Table of ContentsIndex
Menus
14
Names of Parts
2
1
567
1 LCD touch screen (A 23)
2 MAGN. (magnification) button (A 69)/
Assignable button 3 (A 97)
3 MENU button (A 28)
4Joystick (A 28)
5 ACCESS indicator (A 31)
3
4
8910
6 CARD OPEN (open recording media slot cover)
lever (A 31)
7 Recording media slot cover
8 CFast card slot (A 31)
9SD card slot (A 31)
10 CFast card release button (A 31)
Table of ContentsIndex
Menus
Names of Parts
1
2
1 Built-in microphone (A 78)
2 Accessory shoe (A 86, 94): For attaching the
optional GP-E2 GPS Receiver or optional EXseries Speedlite for EOS cameras.
3 ON/OFF button (A 27)
4START/STOP button (A 37)/PHOTO button
(A 37): When you are recording video clips, this
button is referred to in this manual as the START/
STOP button; when you are shooting photos, it is
referred to as the PHOTO button.
3
4
5
6
7
8
9
11
5 Movie/photo switch (A 25)
6 Control dial (A 49)
7 ^ (playback) button (A 100)
8 POWER/CHG (power/battery charging) indicator
(A 18)
9 Shooting mode dial (A 49)
10 Shooting mode dial button (A 49)
11 Built-in speaker (A 105)
10
15
Table of ContentsIndex
Menus
Names of Parts
16
1
24
1 Battery compartment
2 Battery release latch (A 18)
3 BATT. OPEN (open battery compartment) switch
(A 18)
3
5
6
4 Battery compartment cover (A 18)
5 Lens hood mount index (A 21)
6 Tripod socket (A 24)
Table of ContentsIndex
Menus
Viewfinder unit
Names of Parts
1 Viewfinder unit latch (A 21)
2Eye cup
RC-6 Remote Controller
123
17
3 Dioptric adjustment lever (A 22)
4
5
4 Delay switch (A 35)
5 Battery compartment cover
Table of ContentsIndex
6 Transmit button
Menus
6
Preparations
2
18
Charging the Battery Pack
The camcorder can be powered with a battery pack or directly using the compact power adapter. The first time you use the
camcorder, charge the battery pack.
For approximate charging times and recording/playback times with a fully charged battery pack, refer to
Playback Times
1 Connect the power cord to the compact power adapter.
2 Plug the power cord into a power outlet.
3 Connect the compact power adapter to the camcorder’s
DC IN terminal.
(A 160).
Recording and
햳
햲
4 Slide the BATT. OPEN switch in the direction of the arrow
and open the battery compartment cover.
5 Insert the battery pack all the way into the compartment as
shown in the illustration.
• Push it all the way in until the battery release latch secures it in
place.
6 Close the battery compartment cover.
• Push the cover until you hear a click. Do not force the cover
closed if the battery pack is not correctly inserted.
햴
DC IN terminal
햲
햳
Table of ContentsIndex
Menus
Charging the Battery Pack
7 Charging will start when the camcorder is turned off.
• If the camcorder was on, the green POWER/CHG indicator will
go out when you turn off the camcorder. After a moment, the
POWER/CHG indicator will turn on in red (battery pack
charging). The red POWER/CHG indicator will go out when the
battery pack is fully charged.
• If the indicator flashes, refer to
8 Disconnect the compact power adapter in the order shown
in the illustration.
Troubleshooting
(A 140).
POWER/CHG
(battery pack charging)
indicator
햲
햳
19
햴
To remove the battery pack
Open the battery compartment cover and slide the battery
release latch in the direction of the arrow so the battery pack
springs out. Remove the battery pack and close the cover.
햵
햳
Battery
release latch
햴
햲
Table of ContentsIndex
Menus
Charging the Battery Pack
IMPORTANT
• Turn off the camcorder before connecting or disconnecting the compact power adapter. After you turn off the
camcorder, important data is updated on the recording media. Be sure to wait until the green POWER/CHG
20
indicator goes out.
• When using the AC adapter, do not fix it permanently to one place as this may cause a malfunction.
• Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment
that is not expressly recommended for use with this camcorder.
• To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power
adapter to voltage converters for overseas travels or special power sources such as those on aircraft and
ships, DC-AC inverters, etc.
NOTES
• You cannot charge the optional LP-E6 Battery Pack with the camcorder.
Check the bottom label of the battery pack and make sure it is an LP-E6N
Battery Pack.
• We recommend charging the battery pack in temperatures between 10 °C
and 30 °C (50 ºF and 86 ºF). If either the ambient temperature or the battery
pack’s temperature is outside the range of approx. 0 °C to 40 °C (32 ºF to
104 ºF), charging may take longer than usual or charging may not start.
• The battery pack will be charged only when the camcorder is off.
• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG indicator
has gone out before restoring the power supply.
• If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the
battery pack will not be consumed.
• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day
before, to ensure a full charge.
• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
Model number
Table of ContentsIndex
Menus
Preparing the Camcorder
Preparing the Camcorder
This section outlines the basic preparations of the camcorder, such as attaching the viewfinder unit and adjusting
the screen and grip.
Attaching the Lens Hood
Attach the lens hood to protect the lens and reduce the amount of stray light that may hit the lens.
Place the lens hood on the front of the lens so that the
hood’s lens mount index covers the index on the lens
and turn it 90 degrees clockwise until it clicks
• Be careful not to deform the lens hood.
• Make sure that the lens hood is aligned with the thread.
(햳).
(햲)
21
Using the Viewfinder Unit
Attaching the Viewfinder Unit
1 Open the viewfinder unit latch and remove the
viewfinder unit cover.
2 Turn the LCD panel 90 degrees upward.
3 Hook the protrusion on the right side of the viewfinder
unit into the groove under the right side of the LCD
panel. Then, lower the viewfinder unit.
햴
햴
햳
햲
햲
햳
햳
Table of ContentsIndex
Menus
햲
Preparing the Camcorder
4 Hook the viewfinder unit latch under the left side of the
LCD panel and then fasten the latch. Then, return the
LCD panel to its original position.
22
Adjusting the Viewfinder Unit
1 Press the ON/OFF button to turn on the camcorder.
• The POWER/CHG indicator will illuminate.
• If necessary, perform the initial setup (A 27).
2 Adjust the dioptric adjustment lever until the viewfinder unit’s
image is sharp.
햳
햲
햴
Removing the Viewfinder Unit
1 Turn the LCD panel 90 degrees upward.
2 Open the viewfinder unit latch and remove the viewfinder unit
from the camcorder.
• Make sure to open the latch all the way before removing
the unit.
3 Attach the viewfinder unit cover, hook the viewfinder unit
latch to the left side of the cover and then fasten the latch.
Table of ContentsIndex
Menus
Dioptric
adjustment lever
햳
햴
햵
햶
햲
4 Attach the viewfinder unit cover.
Preparing the Camcorder
햲
햳햴
NOTES
• When you are not using the viewfinder unit, make sure to attach the viewfinder unit cap to the unit.
Using the LCD Panel
Pull out the LCD panel and adjust it to a comfortable
viewing angle.
• You can adjust the angle also for high- and low-angle shooting.
23
NOTES
• About the LCD screen: The screen is produced using extremely high-precision manufacturing techniques, with
more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally
misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not
constitute a malfunction.
• If the screen appears dim, you can adjust the brightness using the [ System Setup] > [1] >
[LCD Brightness] and [LCD Backlight] settings.
Table of ContentsIndex
Menus
Preparing the Camcorder
Adjusting the Grip
The grip can be rotated 90 degrees toward or away from the
lens to give you a convenient grip angle.
24
While firmly holding the camcorder, rotate the grip to the
desired position.
Attaching the Shoulder Strap
Pass the ends through the strap mounts and adjust the
length of the shoulder strap.
IMPORTANT
• Be careful not to drop the camcorder when attaching or
adjusting the shoulder strap.
Using a Tripod
You can mount the camcorder on a tripod with a mounting screw of 6.5 mm (0.26 in.) or
smaller. Using tripods with longer mounting screws may cause damage to the
camcorder.
6.5 mm
Table of ContentsIndex
Menus
Basic Operation of the Camcorder
Basic Operation of the Camcorder
Depending on how you plan to shoot, you may need to switch between shooting video clips and shooting
photos. Before you shoot, you can also select a shooting mode, which can give you the freedom of adjusting the
camcorder’s camera-related settings or allow you to entrust the settings to the camcorder to varying degrees,
depending on the mode. After you finish recording, you can check your recordings by switching the camcorder
to playback mode.
Switching Between Movies and Photos
Operating modes:
To shoot video clips, set the movie/photo switch to v; to
shoot photos, set it to {.
Setting the Shooting Mode
You can select a shooting mode to match your shooting style.
25
Operating modes:
While pressing down the shooting mode dial button, turn the
shooting mode dial to the desired mode.
• For details on the various shooting modes, refer to
(A 49).
Modes
Shooting
Switching Between Recording and Playback
With a single press of a button, the camcorder can easily switch
between recording mode and playback mode. For details on playing
back your recordings, refer to
Operating modes:
Hold the ^ button pressed down.
Operating Mode Icons Used in This Manual
This instruction manual uses icons to indicate
the recording and playback modes for video
clips and photos.
IconDescription
Video clip shooting mode.
Photo shooting mode.
Video clip playback mode
Photo playback mode.
Playback
(A 100).
Table of ContentsIndex
Menus
Basic Operation of the Camcorder
Using the Touch Screen
The buttons and menu items that appear on the touch screen change dynamically depending on the operating
mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your
fingertips.
26
Touc h
Press on an element displayed on the touch screen.
Used to start playing back a scene in an index screen, to select a setting
from the menus, etc.
Drag
Swipe your finger up and down or left and right across the screen. Used
to scroll menus, to browse through index screen pages or to adjust slider
controls like the volume.
On some screens, you can achieve the same effect by touching the
triangle control buttons.
Pinch
Pinch In
Place two fingers on the screen and bring them together.
Used when playing back clips and photos. Pinch your fingers in to return to
the index screen. Also used during photo playback to zoom out from a
photo that has been zoomed in.
Pinch Out
Place two fingers on the screen and move them apart.
Used on an index screen during playback. Pinch your fingers out to start
playing back the clip. Also used during photo playback to zoom in on the
photo.
IMPORTANT
• The camcorder features a capacitive touch screen. In the following cases, you may not be able to perform
touch operations correctly.
- Using your fingernails or hard-tipped objects, such as ballpoint pens.
- Operating the touch screen with wet or gloved hands.
- Applying excessive force or forcefully scratching the touch screen.
- Attaching commercially available screen protectors or adhesive film onto the touch screen’s surface.
Table of ContentsIndex
Menus
Date, Time and Language Settings
Date, Time and Language Settings
Setting the Date and Time
You will need to set the date and time of the camcorder before you can
start using it. When the camcorder’s clock is not set, the [Date/Time]
screen will appear automatically with the month selected.
Operating modes:
1 Press the ON/OFF button to turn on the camcorder.
• The POWER/CHG indicator will illuminate and the [Date/Time] screen
will appear.
2 Touch a field you want to change (year, month, day, hours or minutes).
• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your
selection.
3Touch [Í] or [Î] to change the field as necessary.
• You can also push the joystick (Ý) to change the field.
4 Set the correct date and time by changing all the fields in the same way.
5 Touch [Y.M.D], [M.D,Y] or [D.M.Y] to select the date format you prefer.
• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your
selection.
• In some screens, the date will be displayed in short form (numbers instead of month names or only the day
and month), but it will still follow the order you selected.
6 Touch [24H] to use 24-hour clock or leave it unselected to use 12-hour clock (AM/PM).
• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your
selection.
7 Touch [OK] to start the clock and close the setup screen.
• You can also push the joystick (Þ) to move between the fields and then press the joystick to make your
selection.
27
NOTES
• You can adjust the date and time later on with the [ System Setup] > [1] > [Date/Time] setting.
• When you do not use the camcorder for about 3 months, the built-in rechargeable lithium battery may
discharge completely and the date and time setting may be lost. In such case, recharge the built-in lithium
battery (A 152) and set the time zone, date and time again.
• Using the optional GP-E2 GPS Receiver, you can have the camcorder adjust settings automatically according
to the UTC date/time information received from the GPS signal (A 86).
Table of ContentsIndex
Menus
Date, Time and Language Settings
Changing the Language
The default language of the camcorder is English. You can set it to one of
27 languages.
[ System Setup]
28
Operating modes:
1 Press the MENU button.
2 Open the [Language] screen.
[ System Setup] > [1] > [Language]
3 Touch the desired language and then touch [OK].
4Touch [X] to close the menu.
NOTES
• Some buttons, such as [FUNC.] and [MENU], will appear in English regardless of the language selected.
Changing the Time Zone
Change the time zone to match your location. The default setting is New
York. In addition, the camcorder is able to retain the date and time of an
additional location. This is convenient when you travel so that you can set
the camcorder to match the time of your home location or that of your
travel destination.
[Language ]
[English]
[ System Setup]
[Time Zone/DST]
[1]
[1]
Operating modes:
1 Press the MENU button.
2 Open the [Time Zone/DST] screen.
[ System Setup] > [1] > [Time Zone/DST]
3Touch ["] to set the home time zone, or [#] to set the time zone of your destination when you are
traveling.
4Touch [Ï] or [Ð] to set the desired time zone. If necessary, touch [$] to adjust for daylight saving
time.
5Touch [X] to close the menu.
[New York]
Using the MENU Button and Joystick
You can navigate some of the camcorder’s menus and screens using the MENU button and joystick instead of
using the touch panel. This is convenient, for example, when the viewfinder unit is attached to the camcorder
and you cannot touch the screen.
Table of ContentsIndex
Menus
Date, Time and Language Settings
Joystick
When making a menu selection, push the joystick
(Ý/Þ) to move the orange selection frame in
the menu. Then, press the joystick itself to select
the menu item indicated by the orange selection
frame.
MENU button
Press the button to open the setup menus and then
press again to close the menu after adjusting
desired settings.
Using the FUNC. Menu and Setup Menus
The camcorder’s functions and settings can be adjusted using the FUNC. menu and setup menus. For details
about the available menu options and settings, refer to the appendix
navigating the menus is explained using mainly the touch panel controls but they can also be navigated using the
joystick and other buttons. The procedure below explains how to use both methods. If necessary, refer back to
this section for details on using the joystick.
FUNC. Menu
The FUNC. menu contains camera-related functions, such as shutter speed and aperture, used while shooting.
The icons of each function’s current setting appears on both sides of the menu. The left side contains functions
used prior to shooting while the right side contains functions that can be used while shooting. You can even
change what functions appear on the right side of the FUNC. menu (A 96).
Although you can access the various functions using the joystick, some functions will still require touch
operations.
Menu Options
(A 131). In this manual,
29
Operating modes:
To use the touch panel controls
1 Touch [FUNC.].
• The FUNC. menu appears. You can drag your finger up/down to see
more functions.
2 Touch the icon of the desired function.
• Menu items not available appear grayed out.
3 Adjust the function and then touch [X].
• Check the function’s description for details.
To use the joystick
1 Push the joystick (Ý/Þ) to select [FUNC.] and then press the joystick.
• The FUNC. menu appears.
2 Push the joystick (Ý/Þ) to select the icon of the desired function and then press the joystick.
• Menu items not available appear grayed out.
3 Adjust the function.
4 Push the joystick (Ý/Þ) to select [X] and then press the joystick.
• Check the function’s description for details.
Table of ContentsIndex
Menus
Date, Time and Language Settings
NOTES
• An adjustment dial will appear when adjusting some functions. To use touch panel controls, drag your finger
left/right to move the adjustment dial to the desired setting. To use the joystick, first press the joystick itself so
30
that the position of the current setting is highlighted in orange and then push left/right to adjust the setting.
Setup Menus
Operating modes:
To use touch panel controls
1 and modes only: Touch [FUNC.].
2Touch [MENU].
• Alternatively, you can press the MENU button to open the setup
menus directly.
• The setup menus appear. Settings are divided into groups, which can
be accessed through the tabs at the top of the screen.
3 Touch the tab of the desired menu.
• Depending on the operating mode, some tabs may be divided into multiple “pages”. Touch the numbers
under the tab icons or drag your finger left/right to switch to other pages in the currently selected tab.
4 Touch the desired setting.
• Menu items not available appear grayed out.
5 Touch the desired option and then touch [X].
• You can touch [X] to close the menu at any time.
• You can touch [K] to return to the previous screen. If you changed a setting, it will be applied.
To use the joystick
1 and modes only: Push the joystick (Ý/Þ) to select [FUNC.] and then press the joystick.
2 Push the joystick (Ý/Þ) to select [MENU] and then press the joystick.
• Alternatively, you can press the MENU button to open the setup menus directly.
• The setup menus appear. Settings are divided into groups, which can be accessed through the tabs at the
top of the screen.
3 Push the joystick (Þ) to select the desired tab and page number.
• Depending on the operating mode, some tabs may be divided into multiple “pages”. Touch the numbers
under the tab icons or drag your finger left/right to switch to other pages in the currently selected tab.
4 Push the joystick (Ý) to move the selection bar to the desired setting and then press the joystick.
• Menu items not available appear grayed out.
5 Push the joystick (Ý/Þ) to select the desired option and then press the joystick.
6 Push the joystick (Ý/Þ) to select [X] and then press the joystick.
• You can press the MENU button to close the menu at any time.
• You can select [K] to return to the previous screen. If you changed a setting, it will be applied.
NOTES
• For brevity’s sake, references in the text to settings in the setup menus will include only the tab of the desired
menu and the setting name. For example, “You can adjust the date and time later on with the [ System
Setup] > [1] > [Date/Time] setting.”
• Depending on the operating mode, you may need to switch pages under the tab to access the function.
Table of ContentsIndex
Menus
Loading...
+ 135 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.