Nexxt washer
_ ©_
en Operating, Care and
Installation Instructions
fr Notice d'utilisation, de
maintenance et
d'installation
es Operacibn, cuidado
e instrueciones para
la instalaci6n
BOSCH
le Co
Definitions .................................................................................
iMPORTANT SAFETY iNSTRUCTiONS ........................................................
GROUNDING INSTRUCTIONS ..............................................................
iNSTALLATiON iNSTRUCTiON ...............................................................
Introduction ..............................................................................
Information concerning waste disposal .......................................................
Environmental Protection / Conservation Issues ................................................
Intended use .............................................................................
Factory supplied equipment ................................................................
Dimensions ..............................................................................
Installation area ...........................................................................
Removing the transport bolts ................................................................
Leveling procedure ........................................................................
Electrical connection .......................................................................
Hose and cable lengths ....................................................................
Water connection .........................................................................
Transport, such as when moving out .........................................................
OPERATING INSTRUCTION .................................................................
Your new washer ..........................................................................
Panel ....................................................................................
Before Using For the First Time ..............................................................
Using For the First Time .....................................................................
Selecting the tanguage .....................................................................
Setting the time ...........................................................................
First washing cycte (without laundry) ..........................................................
Preparing the laundry ......................................................................
Sorting the laundry ........................................................................
Degrees of soiling .........................................................................
Loading the laundry .......................................................................
Laundry Detergents and Additives ............................................................
Dispensing the correct amount of detergent ...................................................
Fitting taundry detergent and/or additives ......................................................
Decolorizing ..............................................................................
Programs and Functions ....................................................................
Basic programs ...........................................................................
Special programs .........................................................................
Display field ..............................................................................
Option buttons ............................................................................
Indicator light above the "Start/Pause" button ..................................................
SpeciaJ features ...........................................................................
5
6
7
7
7
7
7
8
8
8
9
9
9
10
11
12
13
13
14
15
15
15
15
15
16
16
16
17
18
18
18
18
19
19
2O
2O
2O
21
21
le Co
Washing with Standard Settings ............................................................. 22
Washing with individual Settings ............................................................. 23
Quick overview ........................................................................... 23
Spin speed ............................................................................... 24
Program finished at ........................................................................ 24
Washing Mode ........................................................................... 25
Pre-Soak ................................................................................ 25
Signat ................................................................................... 26
Child tock ................................................................................ 26
Setting the time ........................................................................... 27
During Washing ............................................................................ 28
Re selecting a program .................................................................... 28
Add a garment / Interrupting the program ..................................................... 28
Canceling the active program ............................................................... 28
After Washing .............................................................................. 29
User Maintenance instructions ............................................................... 30
Cleaning and Care ......................................................................... 30
Cieaning the appliance housing and control panel .............................................. 30
Cleaning the drum ......................................................................... 30
Cleaning the detergent dispenser ............................................................ 30
Cleaning water intet strainers ................................................................ 30
Descaling the washing machine ............................................................. 31
Troubleshooting of Minor Faults .............................................................. 32
Fault displays ............................................................................. 34
Customer Service ........................................................................... 35
STATEMENT OF WARRANTIES FOR BOSCH CLOTHES WASHERS .............................. 36
Exclusions ............................................................................... 36
Congratulations!
Thenewwashingmachineyoujust
purchasedisa modern,highquality
domesticappliance.
Thismodernwashingmachine
cleansyourlaundryusingthemost
sophisticatedwashingprocesses
toobtainsuperiorcleaningresults.
Excellentengineeringandreliability
reducesoperatingcosts
significantly.
Aneasyoperationphilosophy,
avarietyofcustomizedwashing
programsanda solidtouchand
feetmakesthisappliancea
user-friendlyassistantinyour
household.
Itoffersthefollowingstandard
features:
Lownoiselevelforwashing
andspinning.
Highdoorwithpulllock
(magneticdoorlock).
Dooropening16 inches
(41cm),qualitysturdyhinge,
openingangle 180°.
Drumcapacity17.6tbs(8kg)
forregularcotton.
Eachwashingmachinewhich
leavesourfactoryhasundergone
athoroughperformancetestand
isinfullworkingcondition.
Theappliancemaycontain
residualwaterdueto thetesting
procedures.Ifyouhaveany
questionsconcerninginstallationof
thewashingmachine,ourcustomer
servicewillbehappyto adviseyou.
Furtherinformationandaselection
ofourproductscanbefoundon
ourWebsite:
www.boschapptiances.com
Pleasereadandfollowthese
operatingandinstallation
instructionsalongwithallother
informationenclosedwiththe
washingmachine,
Theseoperatingandinstallation
instructionsdescribevarious
models,Differencesareindicatedin
theappropriateplaces,
Theillustrationsmayshowdifferent
detailsthanyourwasher,
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
Definitions
DANGER This indicates that
death or serious injuries may
occur as a result of
non observance this warning.
WARNING This indicates that
injuries or significant damage
may occur as a result of
non observance this warning.
CAUTION This indicates that
minor injuries or damage may
occur as a result of
non observance this warning.
][]This symbol is used to draw the
user's attention to important
matters.
4
I PC SAFETY 1
To reduce the risk of fire,
electric shock, serious injury
or death when using your
washing machine, follow basic
precautions, including the
following:
1. BOSCH washers are provided
with an Operating, Care and
Installation Instructions Manual.
Read and understand all
instructions before using the
washing machine.
2. Do not wash articles that have
been previously cleaned,
washed, soaked, or spotted
with gasoline, dry cleaning
solvents, other flammable or
explosive substances as they
give off vapors that could ignite
or explode.
3. Do not add gasoline, dry
cleaning solvents, or other
flammable or explosive
substances to the wash water.
These substances give off
vapors that could ignite or
explode.
4. Under certain conditions
hydrogen gas may be
produced in a hot water system
that has not been used for
2 weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot
water system has not been
used for this length of time, turn
on all hot water faucets and let
the water flow out of each
faucet for several minutes
before using the washing
machine. This will release any
accumulated hydrogen gas.
As the gas is flammable,
do not smoke or use an open
flame while carrying out this
procedure.
5. Before the appliance is
removed from service or
discarded, remove the door
and the power cord/plug.
6. Do not reach into the appliance
if the wash drum is moving.
7. Do not instatl or store this
appliance where it wilI be
exposed to the weather.
8. Do not tamper with the
controls.
9. Do not repair or replace any
part of the appliance or attempt
any service unless specifically
recommended in the user
maintenance instructions or in
published user repair
instructions that you
understand and have the skills
to carry out.
10. Always unplug the washing
machine from the power supply
before attempting any service.
Disconnect the power cord by
grasping the plug, not the cord.
11. To reduce the risk of fire,
clothes, cleaning rags, mop
heads and the like which have
traces of any flammable
substance, such as vegetable
oit, cooking oii, petroleum
based oils or distillates, waxes,
fats, etc, must not be placed in
the washing machine. These
items may contain flammable
substances which, even after
washing, may smoke or catch
fire.
12. Do not machine wash
fiberglass materials (such as
curtains and window coverings
that use fiberglass materials).
Small particles may remain in
the washing machine and stick
to fabrics in subsequent wash
loads causing skin irritation.
13. Do not allow children to play on
or with the appliance. Close su
pervision of children is neces
sary when the appliance is
used near children,
14. Keep pets away from the
washing machine,
15. Do not insert/putt out the power
plug with wet hands,
16. Do not touch the door if
washing at high temperatures,
17. Use caution when draining hot
water.
18. Do not climb onto the washing
machine and lean on the open
door,
19, Do not sit or stand on the top of
the vvashing machine,
20. To reduce the risk of fire or
electrical shock, DO NOT use
an extension cord or an
adapter to connect the
washing machine to the power
supply.
21. The washing machine must
only be used for its intended
purpose.
22. Always follow the fabric care
instructions recommended by
the clothing manufacturer.
23. Do not use the washing
machine if it has a worn power
cord or loose plug. Contact an
authorized service agent.
24. Make sure that all water
connections to the washing
machine have shut-off valve(s)
and are readily accessible.
Close the washing machine
water shut off valve(s) at the
end of each wash day.
25. Check the fill hose connections
on a regular basis to ensure
that they are tight and not
leaking.
26.Alwaysreadandfollowthe
instructionsofthe
manufacturerof the
detergent(s),cleaningaid(s),
fabricsoftener(s)andstatic
eliminator(s)whichyouare
using.Heedallwarningsand
precautions.
27.Storealllaundrychemicalsand
aidsinacooldryplaceaccord
ingtothe manufacturers'in
structions.
28.Toreducetheriskofpoisoning
orchemicalburns,keepall
cleaningproductsout of the
reachofchildren.
29.Donotoperatethewashing
machineif anyguards,panels
and/orfastenersexcept
transportfixingboltshavebeen
removed.
30.Donotoperatethewashing
machineif partsaremissing
orbroken.
31.Donotbypassanysafety
devices.
32.Toavoidfloordamageand
moldgrowth,donotletspillsor
splashescausestandingwater
aroundor undertheappliance.
33.Donotoperatethiswashing
machineuntilyouaresurethat:
a. the washingmachinehas
beeninstalledaccordingto
theINSTALLATION
INSTRUCTIONS.
b,
ail water, drain, power and
grounding connections are
in compliance with aiI locaI
regulations and/or other
applicable regulations and
requirements.
34. Failure to install, maintain
and/or operate the washing
machine according to the
manufacturer's instructions
may result in injury and/or
damage.
Notes:
A.B,The IMPORTANT SAFE-
GUARDS and WARNINGS
indicated in this manual
do not cover all possible
conditions which may oc-
cur. Common sense, cau-
tion and care must be exer
cised when installing,
maintaining or operating
the washing machine.
Always contact your
dealer, distributor, service
agent or the manufacturer
about any problems or
conditions that you do not
understand.
GROUNDING IN-
STRUCTIONS
This appliance must be grounded.
In the event of a malfunction or
breakdown, grounding wilt reduce
the risk of electric shock by
providing a path of least resistance
for the electric current. This
appliance is equipped with a cord
that has an equipment grounding
conductor and a grounding plug.
The plug must be plugged into an
appropriate outlet that is properly
installed and grounded in
accordance with all local codes and
ordinances.
Improper connection of the
equipment grounding conductor
can result in electric shock,
Connect to individual Branch
CircuiL
Check with a qualified electrician
or serviceman if you are in doubt
as to whether the washer is
properly grounded,
DO NOT modify the plug
provided with the appliance
if it will not fit the outlet have a
proper outlet installed by a
qualified electrician,
KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
In case of change of ownership,
manual should be conveyed with
the washer.
ESEI S
6
I
Introduction
RiSK OF iNJURY
The washing machine is
heavy. Lift with caution.
Be sure to observe all listed
warnings and cautions,
Frozen hoses can tear/burst.
Do not install the washing ma-
chine outdoors or in an area
exposed to freezing conditions.
These installation instructions are
intended for use by qualified
installers, in addition to these
instructions, if installing the washing
machine:
In the United States comply
with the National Electric Code,
ANSI/NFPA70 latest
edition/State and municipal
and/or local regulations.
In Canada comply with the
Canadian Electric Code C22.1
latest edition/Provincial and
Municipal and/or local
regulations.
If the washing machine is located in
a room which will be exposed to
temperatures below freezing, or if it
is located in a cabin that is being
shut down for the winter, any
residual water in the pump or water
inlet hose(s) must be drained.
Take care not to damage the
washing machine. Do not hold on
to protruding parts (e.g. door) when
lifting.
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
If in doubt, have the appliance
connected by an authorized
technician.
Information concerto
ing waste disposal
Disposing of the packaging
The shipping package has
protected your new appliance on its
way to your home. All packaging
materials are non-polluting and
recyctabte. Please contribute to a
better environment by disposing of
packaging materials in an
environmentally friendly manner.
Please ask your dealer or local
authority about the best means of
disposal.
Keep children away from
shipping carton and
packaging components.
Danger of suffocation from
plastic foi! and folding cartons.
Disposing of your old appliance
Old appliances are not worthless
rubbish! Valuable raw materials can
be reclaimed from environmentally
friendly recycling.
If appliance is no longer usable,
pull out main plug, cut off power
cord and discard.
To prevent children from locking
themselves in the appliance, disable
the door lock or remove the door.
Environmental
Protection /
Conservation Issues
Your washing machine uses water,
energy and detergent efficiently,
thereby protecting the environment
and reducing your household costs.
To use your washing machine in an
efficient and non polluting manner:
Avoid using too much
detergent.
Use detergent recommended
for high efficiency and front
loading washers.
Add detergent according to the
degree of soiling, amount of
laundry and water hardness,
and follow the detergent
manufacturer's instructions.
Intended Use
Your washing machine is intended:
For domestic use only.
For washing machine washable
fabrics in washing water.
For operation using cold and
hot (140 °F/60 °C) tap water
and conventional additives that
are suitable for use in
residential washing machines.
Factory-supplied
equipment
There is a packet of accessory parts
supplied with your washer, Check
that all the accessory parts supplied
for your model are there, Ifany parts
are missing contact your dealer
immediately,
Inside the drum:
Water supply hose for cold
water (blue marking).
Water supply hose for hot
water (red marking).
Water drain hose.
A bag which contains:
Covers to be placed over the
holes for the transport bolts
(after removing them).
Clamp for drain hose.
Elbow for attaching the drain
hose, e.g. to a sink.
- Wrench for levelling
Depending on the type of
connection, the following may also
be required:
Y connector (can be obtained
from any hardware store) in
case there is only a cold water
connection available.
Any residual moisture inside the
drum is due to the final testing
which every washing machine
undergoes before leaving the
factory.
On the rear of the appliance:
Power cord with plug,
C - cold water connection
H = hot water connection
Useful too_s
The following tools are helpful:
Box cutter,
Fiat head screwdriver,
Closed wrench (1/2'/13ram),
Bubble level,
Dimensions
8
a - 27 in. (686 mm)
b - 30.7 in. (780 ram)
c - 37.0 in. (940 mm)
d - 16 in. (407 ram)
Door opening angle 180 °
Approx. weight - 220 tbs (100 kg)
Installation area
Never ground the washer to
plastic plumbing lines, gas
lines or hot water pipes.
Appliance stability is important,
otherwise the washing machine
could "walk" during the spin cycles,
The installation area must be solid
and even. Soft floor surfaces, such
as carpets or surfaces with foam
backing, are not suitable.
If the washing machine is to be
installed on a weak wood floor
consider the following:
13 If possible, place the washing
machine in a corner of the
room.
(3 Screw a water resistant
wooden board (at least 3/4"
thick) to the floor,
(3 Secure the feet of the washing
machine with holding brackets,
Order the holding brackets (set)
from Bosch Customer Service
(WMZ 2200).
Pedestal Mounting
If mounting the washer on the
Bosch pedestal (accessory
no. WTZ1295) follow the instruc
tions supplied with the pedestal.
[_ Install pedestal prior to
removing transport bolts,
Closet
If installing the washer in a closet,
observe the minimum distances
according to the following table:
Minimum Installation Clearances
Closet
Sides 1/4" (6 ram)
Top 12" (305mm)
Rear 2,5" (64 ram)
Front 1/4" (6mm)
Ventilation:
Top: 48 sq. in (310 sq. cm),
Bottom: 24 sq. in (I 55 sq. cm)
8
Removing the
transport bolts
All 4 transport bolts must be
removed before using the ap-
pliance for the first time and
must be retained for any futu-
re transport (e.g. when
moving).
_3
_3
Release screws using a cranked
1/2" wrench provided until they
can be moved freely.
Remove all 4 transport bolts
(bolt, spring, washer and bush
ings) by reaching through the
open washing machine door and
pulling the drum slightly forward.
_3 Insert the covers.
Storing the transport bolts
Always keep the transport bolts for
future transportation of the ap
pliance (such as when moving out).
13 Store the transport bolts with
the washer and bushing at
tached.
Leveling procedure
Each foot of the appliance must be
placed firmly on the ground or the
pedestal to prevent the washing
machine from wobbling.
Level the washing machine front to
back and side to side with the four
height adjustable feet and a bubbte
tevet:
RISK OF INJURIES Take care
when using the wrench.
13 Loosen the counter nut I using
the wrench for levelling.
13 Adjust the height by turning the
height adjustable foot 2.
_3 Tighten lock nut 1 against the
housing.
Electrical connection
GROUNDING iNSTRUCTiONS
This appliance must be grounded.
In the event of a malfunction or
breakdown, grounding wilt reduce
the risk of electrical shock by pro
viding a path of least resistance for
the electric current. This appliance
features a cord with an equipment-
grounding conductor and a ground
ing plug. The plug must be plugged
into an appropriate outlet which has
been properly installed and
grounded in accordance with all to
cat regulations and ordinances.
improper connection of the
equipment grounding con-
ductor may result in electric
shock. Have the appliance
checked by a qualified electrician
or service technician if you are in
doubt as to whether the washer
has been properly grounded.
Do not modify the plug provided
with the appliance if it wilt not fit in
the outlet, have a proper outlet
installed by a qualified electrician,
The washing machine must
only be connected to an indi-
vidual branch circuit via a sock
et which has been properly
installed and grounded.
The household electrical voltage
must correspond to the voltage
specification on the washing
machine (rating plate, see Page 35).
Connection specifications as well
as the required fuses are stipulated
on the appliance rating plate.
Volts Hertz Amperes Watts
110-120 60 15 1350
(max.)
Make sure that:
the power plug fits into the
socket,
the wire size is sufficient,
the grounding system is
properly installed,
The power cord may be replaced by
an electrician only,
Replacement power cords are
available from Customer Service,
Hose and cable lengths
Left-hand connection
c
To reduce the risk of fire or
electrical shock, DO NOT use
an extension cord or an
adapter to connect the
washing machine to the power
suppty.
If an earth leakage circuit breaker is
to be used, only use types marked
with the following symbol: r_%,
Only this symbol can guarantee
compliance with all current
regulations,
Do not insert/remove the power
plug with wet or damp hands,
Touch the plug only when removing
the ptug from the socket,
Right-hand connection
i
m m
[]
_r
a - 55,0 in, / / 140 cm (approx,)
b - 51,0 in,//130 cm (approx,)
c - 33,5 in, / / 85 cm (approx,)
d - 39,0 in, / / 100 cm (approx,)
e = 69,0 in, / / 175 cm (approx,)
f = 34,6 in,//88 cm (approx,)
g = 55,0 in, / / 140 cm (approx,)
Other hoses
Available from appliance dealers:
Extended supply hose
(approx, 96,1 in,//2,44 m),
10
Water connection
Water supply
The water supply hoses must not
be:
Bent or flattened.
The washing machine must
only be operated with cold
and hot (max. 140 °F//60 °C)
tap water. Do not connect the
appliance to the mixer tap of
an unpressurized hot-water
boilen
If in doubt, have the water
connection installed by an
authorized technician.
Connection
C Cold water connection and
H
Modified or cut (stability can
no longer be guaranteed).
Plastic threads must only be
tightened by hand. Do not remove
the strainers from the water suppty
hoses.
Observe the water pressure in the
supply network:
The water pressure should be
between 14.5 and 145 p.s.i.
(1 and 10 bars) when the tap
is turned on, at least 2.2 U. S.
gallons (8 liters) of water should
be discharged per minute.
A pressure regulator valve must
be installed if the maximum
water pressure is exceeded.
Hot water connection (max. 140 °F//60 °C)
To prevent water damage, the
hot and cold water valves
should be accessible when
the washing machine is in
place and should always be
turned off when the washing
machine is not in use.
If installing the washing
machine in a new building or a
building in which the plumbing
system was recently installed
or upgraded, flush the lines
before installing the washing
machine to remove any sand,
dirt or residue_
After the connection:
Turn on the water completely,
and check that connection
points are watertight,
The connection points are un-
der full water pressure. Check
sea! with tap fully open.
11
Water drainage
Do not bend or pullthewater
drainagehose,
Height difference between the
installation location of the washing
machine and the drainage point:
Maximum 8 feet / 244 cm.
Connecting the water
drainage hose
Attach the drain hose to the
end of the drain connection,
Secure the connection point
with the clamp.
Use a screwdriver!
Standpipe Installation
Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into
standpipe.
Use a strap or cable tie to hold
hose in place.
In-Wall Installation
Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into watt
drain.
Use a strap or cable tie to hold
hose in place.
Drainage into a siphon
Secure the connection point
with a hose clip (not included in
factory supplied equipment),
Drainage into a sink
Ensure that the plug is not in the
drain hole.
Attach water drain hose
securely to sink.
When the water is being
drained, check that the water
flow out of the sink is adequate.
Transport, such as
when moving out
Before transporting the washing
machine:
Turn off the water.
Disconnect the washing
machine from the main outlet.
Dismantle the supply and
drainage hoses.
Install the transport bolts.
E]
Having transported the
appliance and ensured proper
installation and connection,
allow the Drain program to run
through before starting the first
wash program.
Preparing and inserting the
transport bolts
Remove the covers,
Prepare the transport bolts:
Loosen the screw in the sleeve
until the end of the screw is
level with the end of the sleeve.
Insert and tighten all transport
bolts. The lug on the washing
machine must be located in the
groove in the rear panel of the
housing.
12
OP NG
Your new washer
CTION
f
!
/
/
!
/
\
\
\
\
\
\
\
/
13
Panem
Buttons for additional options
(inaddition to the programif required)
Bleach: A bleach cyclewilt be addedto the
selected program.
Rinse Hus: Additional rinsing cycle.
Reduced intoning:A gentler spin speedwith
subsequentfluffing to reducecreasing.
Additional option sebcted:
Indicatorlight is tit red.
Switch off additionaJ option:
Press buttonagain. Indicatorlightturns off.
Display field
Indicatesthe settingswhich have been selectedor
which areto bechanged (e.g.spin speed, finishedat,
pre-soak, time and child tock)as weltas the program
progress.
Program selector
Switchesthe machineon and off and sebcts
the program. Canbe turned in both directions.
The programselectordoes notturn whilethe program
is running the programsequenceis electronically
controlled.
Active We
l
Celd ® Celd
Pause Plus Ironing
O O O O
© @@0
Optiens
r i Brain
Sanitary
Start/Pause button
Starts or interruptsthe washingcycle
(programmust first beselected).
mndicatorlight
Indicatorlight flashesred: Settings can be
changed,the wash cyclecan bestared,
door is lockedfor safety reasons,child lock
is activeor program is in "Pause" mode.
Indicatorlight is lit red:Programis running
and "Pause" can be activated.
Theindicator light is off: Programis
finished or no programselected.
Menu
SeIectsthe settingswhich are to be changed.
Select button
Changesall the settingsin the displayfieId.
14
For the First
The washing machine must be
installed and connected properly
(refer to Page 7).
Before using your washing machine
for the first time:
Make sure that the supplied
voltage is the same as the volt
age shown on the rating plate.
Check that the water valves for
the washing machine have
been connected correctly and
are open.
Usi For the
First Time
Selecting the language
[_The program selector must not
be set to Off.
E_The language must be selected
before a program is started.
Simultaneously press the Menu
and Select buttons and hold
down (5 seconds) until the
current setting is displayed.
¢
%
Press the Select button until
the desired language is
displayed.
Confirm the language selection
by pressing the Menu button.
The language selection can be
confirmed either by pressing
the Menu button or by leaving
the selected language for five
seconds.
E_The selected setting is retained
after the wash cycle.
Setting the time
E_To define the individual settings
(especially "Program finished
at"), it is necessary to set
the time first; see Page 27.
First washing cycle
(without laundry}
Your appliance was tested before
leaving the factory. To remove
residues from production and
testing procedures, the first
washing cycle should be carried out
without laundry in the machine.
Do not load any laundry.
Turn on the water tap.
Open the flap of the detergent
dispenser.
Pour approx. 1 quart (1 liter) of
water into the detergent
chamber I; see Page 18.
Fill a regular measuring cup
halfway full of detergent and
pour into detergent chamber I.
E]
Do not use special detergents
for delicates or wool (this will
cause excessive sudsing).
Close the flap of the detergent
dispenser.
Close the door.
Set the program selector to
Regular/Cotton temp. boost,
The StaCdPause indicator light
flashes (red).
Press the Start/Pause button.
The program starts.
The indicator light is on (red).
E]
The individual program steps
are indicated in the display field.
When "Remove laundry" is
displayed:
Open the door,
Turn the program selector to
Off,
15
Preparing the Laundry
Loose debris (coins, paper
clips, nails and other hard ob-
jects) can damage items of
clothing as wel! as parts of the
washing machine (e.g. drum).
Empty all pockets.
Brush off tint and dirt.
Close zippers, button up duvets
and hooks.
Remove curtain rings or tie
them up in a net bag.
Remove pins, buttons, buckles
and other hard objects to avoid
scratching the washer interior.
Remove non-washable trim
and ornaments.
Turn synthetic knitwear
inside out to avoid pilling.
Treat spots and stains.
Delicate items such as
underwired bras (the wire may
come loose during washing
and cause damage), smatI
items (socks and
handkerchiefs), hosiery and
belts should be washed in a
mesh bag to prevent tangling
during the wash cycle.
Sorting the Laundry
According to color and degree of
soiling
Items of clothing may become
discolored. Never wash new
multi-colored items together
with other items.
White items may become gray.
Always wash white and colored
items separately,
Degrees of soiling
Slight dirt
No recognizable dirt or staining.
Laundry may have some body odor.
Light summer clothing.
T-shirts, shirts and blouses that
have been worn for up to one
day.
Bed linen and guest towels that
have been used for one day.
Normal dirt
Visible dirt and/or some light
recognizable staining.
_shirts, shirts and blouses that
are very sweaty or have been
worn several times.
Dish towels, hand towels and
bed linen that have been used
for up to one week.
Sheer curtains (without smoke
staining) that have not been
washed for up to 6 months.
Intensive dirt
Dirt and/or staining recognizable.
Kitchen hand towels that have
been used for up to one week.
Cloth napkins.
Bibs.
Children's outer clothing or
sportswear with grass and soil
stains.
Working clothes such as
overalls or baker's and
butcher's coats.
Typical stains
Body oils, cooking oils/grease,
sauces, mineral oit, wax
(containing fat/oil).
Tea, coffee, red wine, fruit,
vegetables.
Blood, egg, milk, starch
(containing protein/
carbohydrate).
Soot, soil, sand (pigments), red
clay.
Removing stains
If possible, pretreat stains while
they are still fresh.
First, dab soapy water onto the
stain. Do not rub.
Subsequently, wash the items of
clothing using the appropriate
program.
Occasionally, several wash cycles
may be required in order to remove
persistent, dried on stains.
16
Sorting laundry according
to care labeRspecifications
temp. boost hot
150 °F 125 °F
66 °C 52 °C
warm
95 OF
35 °C
60 °F
15 °C
See also temperatures settings
page 19.
Fabric Types
Machine Wash, Cottons _/
Machine Wash,
Permanent Press
Machine Wash, Deficates
Hand Wash
Temperatures
Cotd _}/
Warm
Hot "_
Do not wash clothes in washing
machine if the care label says
"Do Not Wash" or the DO NOT
WASH symbol Sd is on the care
label.
Loading the laundry
EXPLOSION HAZARD!
Items of clothing that have
been pretreated with
solvent-based cleaning
agents, e.g. stain remover and
dry cleaning solvents,
represent an explosion hazard
once loaded into the washing
machine. Therefore, these
items must first be rinsed
thoroughly by hand.
Loose debris in the washing
machine drum can damage
the laundry. Before loading
the laundry, check that there
is no debris in the drum.
Open the door.
][]Do not exceed the maximum
toad. Overloading wilt cause
poor wash results and
encourage creasing.
For best results it is recommended
to load the drum depending on the
fabric type, see special programs
Page 18 for information on bulky
items, e.g. comforters.
Full Load
Cotton and Linens
½ Load
Permanent Press, Synthetic Blends
and Knitwear
½ Load
Woot, Deticates, Sitk
Close the door.
Do not trap any items of
clothing between the door and
rubber seat.
Door should be able to close
easily, not by force.
Unfold the sorted items of
clothing and place them loosely
into the drum. Mix up large and
small items. Items of varying
size wilt distribute better during
the spin cycle.
17
ry
Additives
Dispensing the correct
amount of detergent
RISK OF POISONING!
Keep detergents and
additives out of the reach of
children.
Measure out the detergent (powder
or liquid) according to:
The water hardness. This
information can be obtained
from your local water authority.
The amount of laundry.
The degree of soiling.
Information on soiling can
be found on Page 16.
The specifications of the
detergent manufacturer.
Measuring the correct amount
of detergent relieves the strain
on the environment and
ensures optimum washing
results.
Too little detergent:
The laundry is not cleaned properly
and will eventually become gray
and stiff. Grayish brown spots (fat
globules) may appear on the
laundry. The heaters may calcify.
Too much detergent:
Not environmentally friendly,
excessive suds reduce wash
agitation producing poor washing
and rinsing results.
Filling laundry deter-
gent and/or additives
Open the flap of the detergent
dispenser.
Add the detergent and/or
additive.
Dispenser h
Dispenser for detergent, stain
remover,
]]]To prevent sudsing use of
HE-Detergent is
recommended.
Dispenser I1:
Cleaning additives, e.g. fabric
softener, fabric conditioner. Do not
fill over edge of max line!
Dispenser IIh
Dispenser for liquid bleach (chlorine
bleach, color safe bleach).
Do not overfill!
[] Concentrated or thick fabric
softener, conditioner and
powder bleach must be diluted
with a little water before being
poured into the dispenser
(prevents overflow due to
obstruction).
Close the flap of the detergent
dispenser.
Decolorizing
Dyes may contain sulphur or
chlorine, These substances
may cause parts of the
washing machine to corrode,
Do not dye items of laundry
in the washing machine,
Functions
Cycle time wilI vary depending on
cycle selected, temperature and
pressure of incoming water, water
hardness, size of load, type of
fabrics and distance of unit from the
drain.
The maximum spin speeds of the
programs are dependent upon the
cycle. For adjusting the spin speed,
see Page 24.
Basic programs
Regular/Cotton Temp Boost
Regular/Cotton settings are
intended to be used for heavily
soiled stained colorfast fabrics.
Sturdy, hard wearing items made
of cotton or linen such as towels,
sheets or white sports socks.
Regular/Cotton Hot
Normally and/or heavily soiled
colorfast fabrics. Sturdy, hard-
wearing items made of cotton
or linen such as work clothes.
Regular/Cotton Warm
Lightly and/or normally soiled
non colorfast fabric. Sturdy, hard
wearing items made of cotton or
linen such as Jeans, T shirts and
sweatshirts.
Regular/Cotton Cold
Lightly soiled non-colorfast fabric.
Sturdy, hard wearing items made
of cotton or linen (colors that may
bleed or fade).
Permanent Press Hot
Items consisting of normally soiled
colorfast cotton, permanent press,
linen, synthetic or blended fabrics
and outer garments. Clothes
requiring a special tumble sequence
and spin speed to minimize
creasing.
18
Permanent Press Warm
Items consisting of lightly and/or
normally soiled non colorfast
cotton, permanent press, linen,
synthetic or blended fabrics and
outer garments. Clothes requiring a
speciat tumble sequence and spin
speed to minimize creasing, such
as blouses, shirts and overalls.
Permanent Press Cold
Items consisting of lightly and/or
normally soiled non colorfast
cotton, permanent press, linen,
synthetic or blended fabrics and
outer garments. Clothes requiring a
speciat tumble sequence and spin
speed to minimize creasing.
Special programs
Delicates
Deticates settings are intended for
use with delicate easy care items
made of cotton, satin, synthetic or
blended fabrics and curtains,
dresses, skirts and blouses.
Bulky items, e.g. comforters, can
be washed with this cycle because
of gentle action and additional rinse
(automatically added).
No spinning between rinse cycles.
Hand Wash
Hand Wash settings are intended
for very delicate easy care items
that usually require hand washing.
These cycles have been specifically
designed to provide extremely
gentle treatment of fabrics.
Silk or other items marked with the
"Hand Wash" symbol _ on the care
label can be safely washed with this
cycle.
Wool
Wootens (machine wash and hand
wash).
Active Wear
For outdoor clothing.
Sanitary
Sanitary cycle for cleaning stained
cotton colorfast items.
Spin
Spin cycie for spinning wet, hand
washed taundry.
Water is drained before and during
the spin cycle.
Soak
A cycle for pre treatment of heaviiy
stained items. The soak cycle lasts
2 hours and ends with a short spin
cycie. Aii the water is pumped out.
Drain
Can be used to drain water without
a spin cycie.
Temperature Settings
The following wash temperatures
are available:
Sanitary: 155 °F (68 °C)
Temp. boost: 150 °F (66 °C)
(only Regular/Cotton)
hot: 125 °F (52 °C)
warm: 95 °F (35 °C)
cold: 60 °F (15 °C)
Maximum spin speeds of the
programs
Revolutionsper Typeof
minute laundry/Extra
cycle
1200 Regular/C0tt0n
800 PermanentPress
600 Delicates
400 HandWash
800 Wool
600 ActiveWear
1200 Sanitary
1200 Spin
400 soak
In the Regular/Cotton, Sanitary
and Spin programs the fabrics will
be spun at the maximum possibte
spin speed.
In the Permanent Press, Wool,
Soak, Delicates, Hand Wash and
Active Wear programs, the
washing machine spins at a lower
spin speed for gentle treatment.
If required you can reduce the spin
speed of laundry, minimum is
400 revolutions per minute.
Display field
In the first line, the operating and
program progress text is displayed
at the left. The current time at the
right (if the text is tong, the time is
not displayed).
In the second line, the disptay
indicates the spin speed and the
time at which the program is
expected to be finished, as welt as
symbols for Spin speed, Washing
mode, PreoSoak, Signal and Child
lock,
Spin speed or No final spin
The maximum spin speed of the
program is displayed. During the
Drain program .... will be
displayed.
The speeds can be changed.
No final spin can also be selected.
No final spin (" - ")
The water remains in the machine
after the finaI rinse. Recommended
for deticate taundry.
Use this setting to avoid creasing if
the ctothing cannot be taken out of
the washing machine immediately
upon completion of the cycle.
Before unloading you must drain
the remaining water by selecting
Drain or Spin and starting the
machine.
Program finished at
Indicates when the program will
end,
f:3 Symbol for "Mode: Normal
Wash"
This symbol is displayed if "Mode:
Normal Wash" was selected.
19
I2_ Symbol for "Mode: Quick
Wash"
This symbol is displayed if "Mode:
Quick Wash" was selected.
% Symbol for "Mode: Power
Wash"
This symbol is displayed if "Mode:
Power Wash" was selected.
Symbol for PreoSoak
This symbol is displayed if
PreoSoak: on was selected in the
menu.
d]_)Symbol for signal
This symbol is displayed if the signal
volume was not set to off,
_o Symbol for child lock
This symbol is displayed if Child
lock: on was selected in the menu.
Option buttons
Bleach
.............t.
B_ Reduced
÷ e ÷
When this button is pressed,
a bleach cycle will be added to
the selected cycle.
The washing cycle time is extended
accordingly.
Rinse Plus
e
i
When this button is pressed, an
additional rinsing cycle wilt be
added to the selected cycle.
Washing cycle time is extended
accordingly.
Reduced Ironing
Indicator light above
the "Start/Pause"
button
The indicator light conveys the
following information:
Indicator light flashing red:
Program can be started.
Adding laundry is possible
Indicator light is tit red:
Program is running.
Adding laundry is not possible
because the door is locked for
safety reasons.
Laundry may be added after
pressing the StaCdPause button.
[_ Exception: If the child lock was
selected, the indicator light is
off. At the end of the program,
the door is locked!
When this button is pressed, a
gentler spin speed with subsequent
fluffing is used. After the spin cycle
the laundry is arranged loosely in
the drum wrinkling is reduced.
Washing cycle time is extended
accordingly.
[_ Remove the laundry as soon as
the spin cycle is complete.
2O
Speciat features
Auto Load adjust
"Auto Load adjust" adjusts the
water and energy consumption for
each program and determines the
amount of laundry and type of
fabrics.
This process is built into your ma-
chine and occurs automatically.
This control reduces water and
energy consumption when washing
small loads.
A flow sensor measures the water
flow rate and meters the exact
volume of water required for the
toad.
This sensor ensures the water level
is correct for washing your laundry
from our economical "Regular/
Cotton" and "Permanent Press"
programs to the "Delicates", "Hand
Wash", "Wool", "Active Wear" and
"Sanitary" cycles.
Unbalanced load detection
system
The automatic unbalanced toad
detection system spins the laundry
several times to ensure even
distribution.
If the wash toad is unevenly
distributed, it will not spin (for safety
reasons) or the final spin speed is
reduced.
In the wool program the appliance
will attempt to start the spin cycle
only twice in order to prevent
shrinking.
Displayed Time
Due to these and other
characteristics of the controls the
actual cycle time wilt vary.
When a program has been
selected, the expected cycle time is
displayed.
The following will effect the
displayed time:
Load size
Repeated spin attempts to
evenly distributed toad
Additional rinse cycles if
excessive foam occurs
Water pressure is too low
Selection of additional options,
e.g. "Rinse plus"
[_You may notice these effects
(more or less time) changing
the displayed time when they
occur in the cycle. If no options
are selected and these effects
do not occur, the time
indicated wilt be time that the
cycle will finish.
21
ash"
The specified standard settings are
optimized for the seIected program.
If you do not want to change these
standard settings:
Turn on the water taps.
PeJ'manent press Off Re[Jalat/Cotto n
De!icates ! ) Temp beost
,oo wo.o\_.!
, woo,_ _ _iSOak
Active Wear
I _ Drain
San!ary
Turn the program selector to
the desired program.
Load the washing machine and
close the door,
The Start/Pause indicator light
flashes (red).
S
%
If necessary, press the button(s)
for additional option(s).
The indicator light of the
selected button is tit (red).
If an incorrect combination was
inadvertently selected, the
indicator light of the selected
button is turned off and a signal
is emitted.
ili!:/!77C:iU ¸ • U•!:i: iq
i6
Perglallezlt Press Off Regular/Cottoll
Cotd • Cold
Hot!_ Hot
Oelicates I / Temt_boost
HandWash Spin
A¢tive Wear I D_ain
Sanitary
Press the Start/Pause button.
The indicator light is tit (red).
The program starts.
E_ Each program step is indicated
in the display field.
Washing with individual settings is
described on the next page.
22
Wash with
The individual settings may be
adjusted to your requirements,
Quick overview
Individ
Beiow is a quick overview of the
adjustable settings,
S
The steps for changing the settings
are described in detait in the
following pages,
Selecta programwith theprogramselector,
Loadthe laundryandclosethe door,
I PresstheMenu button,
I ] I I I I
Spinspeed Programfinishat WashingMode Pre-Soak Signal Childlock Setclock
time
Page24 Page24 Page25 Page25 Page26 Page26 Page27
Dependenton pro- Adjustable Normal OFF OFF OFF Hours/
gramand model; in 30minute ON ON minutes
Quick Continuous
seePage19. steps
Power Max
I J I I I I
PressSelect buttonuntildesiredsettingis obtained,
PressMenubuttonfor moresettingsorpressStart/Pausebutton
to beginwashing.
23
Spin speed
The maximum spin speed can be
reduced.
The maximum spin speed depends
on the setected program: see also
information on Page 19.
Turn the program seiector to
the desired program.
Load the taundry and close the
door.
The Start/Pause indicator tight
flashes (red).
Example:
Press the Menu button until
"Spin speed" is dispIayed.
Current spin speed flashes.
The Start/Pause indicator tight
flashes (red).
[_lf no buttons are pushed within
10 seconds the display will
revert back to normat "Ready".
Changed settings will be
retained.
Press the Select button until
the desired spin speed or "No
final spin" is displayed.
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
Press the Start/Pause button.
The program starts.
The indicator tight is tit red.
[_The individual program steps
are indicated in the display field.
Program finished at
[_To change the program end
time the clock must be set first
(see Page 27).
Turn the program selector to
the desired program.
Load the taundry and close the
door.
The Start/Pause indicator light
flashes (red).
Example:
Press the Menu button until,
"Program finished at" is
displayed.
Current end time flashes.
The Start/Pause indicator light
flashes (red).
If no buttons are pushed within
10 seconds the display wilt
revert back to normal "Ready".
Changed settings will be
retained.
i_i__ _
E]
E]
E]
Press the Select button until
the program end time is dis
played. The program end time
can be set in 30 minute steps.
The end time can be pro
grammed up to a maximum
24 hours in advance.
The end time will be reset if the
program, additional options or
the current time is changed.
If there is a small toad of lightly
soiled laundry, the program
may end well before the se
tected end time,
If there is a large load of heavily
soiled laundry, the program
may end several minutes after
the selected end time,
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
= IVtenu Seiec|
Press the Start/Pause button.
The delayed Start is activated.
The indicator light is lit.
"Time delay" is indicated in the
display field.
To save energy, all displays are
switched off 30 seconds after
the buttons were last pressed.
If the Select button is pressed,
the displays are switched on
again.
24
Washing Mode
You can choose several washing
modes.
The Modes are:
"Normal Wash" f2
Default wash time.
"Quick Wash" @
Reduced wash time for light
soils and shorter cycle time.
"Power Wash" %
Increased wash time for heavy
soiled loads.
Turn the program selector to
the desired program.
Load the laundry and close the
door.
The Start/Pause indicator light
flashes (red).
Example:
Press the Menu button until,
"Mode: Normal Wash" is
displayed.
The "12" symbol flashes.
The Start/Pause indicator light
flashes (red).
[_lf no buttons are pushed within
10 seconds the display wilt
revert back to normal "Ready".
Changed settings will be
retained.
Press the Select button until
the desired washing mode is
displayed.
E_lf "Power Wash: on" or "Quick
Wash: on" were selected, the
"%"or" _ "symbol are
permanently displayed when
the menu is left.
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
Press the Start/Pause button.
The program starts.
The indicator light is tit.
E_The individual program steps
are indicated in the display field.
PreoSoak
An integrated preosoak cycle for
pre treatment of heavily stained
items.
Turn the program selector to
the desired program.
Load the laundry and close the
door, The Start/Pause
indicator light flashes (red),
Example:
Press the Menu button until
"PreoSoak: off" is displayed.
The "_" symbol flashes.
The Start/Pause indicator light
flashes (red).
E_lf no buttons are pushed within
10 seconds the display wilt
revert back to normal "Ready".
Changed settings wilt be
retained.
Press the Select button until
"Pre-Soak: off_'-or "Pre-Soak:
on is displayed.
[_lf "Pre-Soak: on" was selected,
the "w" symbol is permanently
displayed when the menu is
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
Press the Start/Pause button.
The program starts.
The indicator light is tit red.
[_The individual program steps
are indicated in the display field.
25
Signan
The acoustic signai indicates the
start or end of the program,
operating errors or malfunctions,
You can specify the voIume of the
acoustic signat,
Activating, specifying the
signal volume and
deactivating the signal
Turn the program selector to
the desired program.
Load the laundry and close the
door.
The Start/Pause indicator light
flashes (red).
Example:
S;;{to _:!iiiii
Press the Menu button until
"Signat: off" is displayed.
The "q,)" symbol flashes.
The Start/Pause indicator light
flashes (red).
[]_3 If no buttons are pushed within
10 seconds the display wilt
revert back to normal "Ready".
Changed settings will be
retained.
Press the Select button until
"Signal: continuous" is
displayed.
While holding down the Select
button the volume of the
acoustic signal wilt increase.
When the signal has reached
the required volume, release
the Select button.
Hold down the Select button
after 10 seconds the display
indicates "Signat: max".
To deactivate the signal, if the
display indicates "Signal: max",
hold down the Select button,
after 10 seconds the disptay
indicates "Signal: off".
E]
The selected setting is retained
after the washing cycle.
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
Menu Select
i
Press the Start/Pause button.
The program starts.
The indicator light is tit.
E_The individual program steps
are indicated in the display field.
Child lock
You can secure your washing
machine to prevent selected
functions from being changed
inadvertently.
If the child lock has been selected:
No changes can be made while
the program is running.
The door remains locked at the
end of the program.
Activating the cMd lock
Turn the program selector to
switch on the appliance.
Press the Menu button until
"Child lock: off" is displayed.
The "_-o" symbol flashes.
Press the Select button until
"Child lock: on" is displayed.
When the menu is left, the "_-o"
symbol is permanently
displayed.
[_You can set child lock on/off
before starting a program or in
"Pause" mode only.
Starting a program with "cMd
look: on"
Turn the program selector to
the desired program.
Load the laundry and close the
door.
The Sta_dPause indicator light
flashes (red).
26
Menu Select
Press the Start/Pause button
and hold down (5 seconds).
The program starts. The
indicator light is lit (red).
The child lock is activated.
[]_3 To deactivate the child lock
temporarily press the
Start/Pause button again(5
seconds) until the Start/Pause
indicator light flashes. Now you
can change programs or
options. Press the Start/Pause
button to reactivate the child
lock.
[_You can stop a running
program with activated child
lock turning the program
selector to "off'!!
When you switch it on again
the interrupted program will
continue.
Unloading laundry at the end
of a cycle with "child lock: on"
Press the Start/Pause button
and hold down (5 seconds).
You can open the door and
remove laundry.
The child lock setting remains
activated even if you switch off
the appliance.
[_3 Next time you switch on the
appliance child lock is
activated. The door is locked
and no changes can be
selected.
Press the Start/Pause button
(5 seconds) to open the door.
Deactivating the child lock
Turn the program selector to
the desired program to switch
on the appliance.
Press the Menu button until
"Child lock: on" is displayed.
The "_-o" symbol flashes.
Press the Select button until
"Child lock: off" is displayed.
E_You can set child lock on/off
before starting a program or in
"Pause" mode only.
Setting the time
You can set the current time. The
settings are retained even if your
washing machine is not used for up
to 6 weeks.
Turn the program selector to
the desired program.
Example:
E]
Press the Menu button until
"Time:" is displayed. The hours
display flashes.
The Start/Pause indicator light
flashes (red).
If no buttons are pushed within
10 seconds the display will
revert back to normal "Ready".
Changed settings wilt be
retained.
Press the Menu button until the
minutes display flashes.
The StaCdPause indicator light
flashes (red).
iiiiiiii
Press the Select button until
the minute display is correct.
The time is now set.
[_ Press the Menu button, the
menu function ends.
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
Press the Select button until
the hour display is correct.
27
g
hing
Re-selecting a
program
If the child lock is active, tern
porarity deactivate it.
See page 26.
Turn the program selector to
Off.
Turn the program selector to a
newly selected program.
The Start/Pause indicator light
flashes.
If the child lock is active,
deactivate again temporarily.
If required, change the settings.
See Page 23.
Press the Start/Pause button.
The program starts.
The indicator light is tit.
Add a garment /
Interrupting the
program
You can put laundry in the drum
later, take laundry out of the drum
early or interrupt the program at any
time.
[_lt is not recommended to add
laundry after the washing phase
is complete.
Without childlock
[_You can add or reduce laundry
as long as the Start/Pause
indicator light flashes (red).
Press the Start/Pause button.
The following displays are
indicated in succession:
"Pause",
"Door can be opened".
Open the door.
Add/remove the laundry.
Close the door.
Press the Start/Pause button.
The program continues.
The indicator light is tit (red).
%
%
When the Start/Pause
indicator light is lit (red), the
program can be interrupted,
however the door cannot be
opened for safety reasons
(water level, temperature or
drum speed too high).
The following displays are
indicated in succession:
"Pause",
"Door cannot be opened".
If the speed is too high, the
Start/Pause indicator light is tit
(red). Laundry can be added in
"Pause" mode when the drum
is at a standstill.
Child lock activated
[]
Press the Start/Pause button
and hold down (5 seconds),
child took is deactivated and
program witt be interrupted.
If the Start/Pause indicator
light is lit (red), the door cannot
be opened for safety reasons
(water level, temperature or
drum speed too high).
The fotlowing displays are
indicated in succession:
"Pause",
"Door cannot be opened".
If the Start/Pause indicator
light flashes (red), the laundry
can be added or removed.
The fotlowing disptays are
indicated in succession:
"Pause",
"Door can be opened".
Open the door.
Add/remove the taundry.
Ctose the door.
Press the Start/Pause button.
Program continues.
Child lock is reactivated.
The indicator light is tit (red).
Canceling the active
program
If you would like to terminate a
program and remove the laundry:
Press the Start/Pause button
and hold down (5 seconds)if
child lock is active.
Turn the program selector to
Drain or Spin.
If a program is interrupted at a
high temperature, allow the
laundry to coot down until
doorgtass is not too hot to
touch.
Press the Start/Pause button.
Wait until the program ends.
Press the Start/Pause button
and hold down (5 seconds)if
child lock is active.
Open the door.
%
Unload the laundry,
If a program is interrupted at a
high temperature, the door may
remain locked until the
appliance has cooled down.
If the program is terminated by
switching off the appliance, the
door may remain locked.
28
ashing
The Start/Pause indicator light
goes out.
Display field: "Remove laundry".
"CHd lock: on" preseJected
The Start/Pause indicator light is tit
(red).
Display field: "Remove laundry".
Press and hold down the
Start/Pause button
(5 seconds) until "Pause"
is displayed. The Start/Pause
indicator light flashes (red).
Open the door.
Turn the program selector to
Off.
Open the door.
Permanent Press 0fr: Regu!at!Cotton
Cold
woo_ s°ak I
AcUve Wear I Drain
San tary
Turn the program selector to
Off.
OF
"No final spin" preselected
The Start/Pause indicator light
flashes. Display fietd:"Start or Drain"
or
If required, change the spin
speed; see from Page 24.
Press the Start/Pause button.
The program starts. The
program progress is indicated
in the display field.
The indicator light is tit.
Turn the program selector to
Drain. The StaCdPause
indicator tight flashes.
Press the Start/Pause button.
The indicator light is lit.
Display fietd: "Draining water".
When the additional program
has ended, open the door.
Turn the program setector to
Off.
Close the taps.
Remove the laundry.
E_The child lock is reactivated as
soon as the appliance is
switched on again.
Occasionally check for any
foreign objects (e.g. coins,
paper clips) between the drum
and rubber sea! risk of rust!
Leave the loading door ajar to
allow the inside of the washing
machine to dry.
29
Cleaning and Care
RiSK OF ELECTRIC SHOCK!
Always disconnect the
appliance from the power
outlet before cleaning.
Never clean the washing
machine with a pressure washer.
RISK OF EXPLOSION!
Never use flamrnable solvents
to clean the appliance.
Cleaning the appliance
housing and control
panel
As required:
Use hot soapy water or a mitd,
non abrasive cleaning agent.
Rub dry with a soft towek
Cleaning the drum
If rust spots have formed due to
[eft over debris (e.g. coins, paper
dips, nails):
Use a chtodne free cleaning
agent. Foltow the
manufacturer's instructions.
Never use steet wool.
instructions
Cleaning the detergent
dispenser
If residual detergents or additives
have accumulated
or if softener/bleach are not futly
rinsed out:
Open the flap of the detergent
dispenser.
Pull out the softener/bleach
compartment in a vertical
direction and remove.
Clean the detergent dispenser
insert under running water.
This can be disassembled into
two parts!
Cleaning water inlet
strainers
This is necessary if very little or no
water flows into the washing
machine,
First release the water
pressure in the supply hoses:
Turn off the water taps.
Turn the program selector to
any program (except Spin or
Drain),
Press StadJPause button and
wait for "Water tap closed?"
message.
Turn the program selector to
Off.
Cleaning the strainer(s) on the
water tap
On both the hot and cold water tap:
Disconnect the hose from the
water tap,
Rinse the strainer under flowing
water,
Reconnect the hose,
Insert the detergent dispenser
until it clicks into place.
3O
Loading...