Loading...
FlexiDomeHD 1080p IP Camera
NDN-832
en Installation Manual
FlexiDomeHD 1080p IP Camera |
Table of Contents | en |
3 |
|
|
|
|
|
Table of Contents |
|
|
|
|
|
|
|
1 |
Safety |
|
6 |
1.1 |
Safety precautions |
|
6 |
1.2 |
Important safety instructions |
|
7 |
1.3 |
Connection in applications |
|
8 |
1.4 |
Type label |
|
8 |
1.5 |
FCC & ICES compliance |
|
9 |
1.6 |
MicroSD cards |
|
10 |
1.7 |
UL certification |
|
10 |
1.8 |
Bosch notices |
|
11 |
1.9 |
Copyrights |
|
12 |
|
|
|
|
2 |
Introduction |
|
13 |
2.1 |
Features |
|
13 |
|
|
|
|
3 |
System Information |
|
14 |
3.1 |
Overview of functions |
|
14 |
3.1.1 |
Progressive scan |
|
14 |
3.1.2 |
Day/Night function |
|
14 |
3.1.3 |
Quad-streaming |
|
14 |
3.1.4 |
ONVIF (Open Network Video Interface Forum) |
14 |
|
3.1.5 |
Audio |
|
15 |
3.1.6 |
Alarm I/O |
|
15 |
3.1.7 |
Tamper detection and motion detection |
|
15 |
3.1.8 |
Video encoding |
|
15 |
3.1.9 |
Multicast |
|
15 |
3.1.10 |
Power-over-Ethernet |
|
15 |
3.1.11 |
Data interface |
|
15 |
3.1.12 |
Encryption |
|
16 |
3.1.13 |
Recording |
|
16 |
3.1.14 |
Configuration |
|
16 |
3.2 |
Operation with external systems |
|
17 |
|
|
|
|
4 |
Planning |
|
18 |
4.1 |
Unpacking |
|
18 |
4.2 |
System requirements |
|
18 |
Bosch Security Systems |
Installation Manual |
AM18-Q0601 | v1.0 | 2012.01 |
4 en | Table of Contents |
FlexiDomeHD 1080p IP Camera |
|
|
|
|
|
|
|
5 |
Installation |
19 |
5.1 |
Parts |
19 |
5.2 |
Mounting the unit |
20 |
5.2.1 |
Surface mounting |
20 |
5.2.2 |
Flush mount |
22 |
5.3 |
Connections |
24 |
5.3.1 |
Make the connections |
24 |
5.4 |
Mount the camera module |
27 |
5.5 |
Opening the camera module |
28 |
5.6 |
Controls |
29 |
5.7 |
Camera set-up |
30 |
5.8 |
Camera positioning |
31 |
5.8.1 |
Pan |
31 |
5.8.2 |
Tilt |
32 |
5.8.3 |
Twist |
33 |
5.9 |
Using the install wizard |
34 |
5.9.1 |
Adjustment procedure |
34 |
5.10 |
Closing the unit |
35 |
|
|
|
6 |
Camera configuration |
36 |
6.1 |
Day/Night switching |
36 |
|
|
|
7 |
Browser connection |
37 |
7.1 |
Protected network |
37 |
|
|
|
8 |
Troubleshooting |
38 |
8.1 |
Function test |
38 |
8.2 |
Resolving problems |
39 |
8.3 |
Customer service |
41 |
|
|
|
9 |
Maintenance |
42 |
9.1 |
Testing the network connection |
42 |
9.2 |
Communication with Terminal Program |
42 |
9.3 |
Repairs |
44 |
9.3.1 |
Transfer and disposal |
44 |
AM18-Q0601 | v1.0 | 2012.01 |
Installation Manual |
Bosch Security Systems |
FlexiDomeHD 1080p IP Camera |
Table of Contents | en 5 |
|
|
|
|
|
|
|
10 |
Technical Data |
45 |
10.1 |
Specifications |
45 |
10.1.1 |
Dimensions |
47 |
Bosch Security Systems |
Installation Manual |
AM18-Q0601 | v1.0 | 2012.01 |
6 en | Safety |
FlexiDomeHD 1080p IP Camera |
|
|
1Safety
1.1Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of damage to the unit.
CAUTION!
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
CAUTION!
The camera must be connected to earth.
AM18-Q0601 | v1.0 | 2012.01 |
Installation Manual |
Bosch Security Systems |
FlexiDomeHD 1080p IP Camera |
Safety | en |
7 |
|
|
|
1.2Important safety instructions
Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings on the unit and in the operating instructions before operating the unit.
1.Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
2.Do not install unit near any heat sources such as radiators, heaters, stoves, or other equipment that produce heat. Avoid exposure to direct sunlight for long periods.
3.Never spill liquid of any kind on the unit.
4.Take precautions to protect the unit from power and lightning surges.
5.Adjust only those controls specified in the operating instructions.
6.Operate the unit only from the type of power source indicated on the label.
7.Unless qualified, do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel.
8.Install in accordance with the manufacturer's instructions in accordance with applicable local codes. Use only attachments/accessories specified by the manufacturer. Equipment change or modification could void the user's guarantee or authorization agreement.
9.Connect the yellow/green earth wire of the camera to the system earth of the installation to ensure correct safety and EMC/RFI protection.
Bosch Security Systems |
Installation Manual |
AM18-Q0601 | v1.0 | 2012.01 |
8 en | Safety |
FlexiDomeHD 1080p IP Camera |
|
|
1.3Connection in applications
Grounding
The yellow/green safety (power) ground wire from the camera must be connected to the system earth of the installation. U.S.A.: - section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding.
12 VDC / 24 VAC power source: This unit is intended to operate with a limited power source. The unit is intended to operate at either 12 VDC or 24 VAC (if PoE is not available). User supplied wiring must be in compliance with electrical codes (Class 2 power levels).
PoE: Use only approved PoE devices. Power-over-Ethernet can be connected at the same time as a 12 VDC or 24 VAC power supply.
If auxiliary power (12 VDC or 24 VAC) and PoE is applied simultaneously, the camera selects auxiliary input and shuts off the PoE.
1.4Type label
The type label is located on the rear of the camera module.
AM18-Q0601 | v1.0 | 2012.01 |
Installation Manual |
Bosch Security Systems |
FlexiDomeHD 1080p IP Camera |
Safety | en |
9 |
|
|
|
1.5FCC & ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–reorient or relocate the receiving antenna;
–increase the separation between the equipment and receiver;
–connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
–consult the dealer or an experienced radio/TV technician for help.
Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify and Resolve Radio-TV Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.
Bosch Security Systems |
Installation Manual |
AM18-Q0601 | v1.0 | 2012.01 |
10 en | Safety |
FlexiDomeHD 1080p IP Camera |
|
|
1.6MicroSD cards
Bosch Security systems recommends that local storage on microSD card should only be used for alarm recording and Automatic Network Replenishment (ANR) applications. To minimize the risk of lost of digital information, we recommend multiple, redundant recording systems, and a procedure to back up all digital information.
1.7UL certification
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/EC
AM18-Q0601 | v1.0 | 2012.01 |
Installation Manual |
Bosch Security Systems |
FlexiDomeHD 1080p IP Camera |
Safety | en 11 |
|
|
1.8Bosch notices
Video loss
Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
Optical elements
Optical elements are sensitive and should be protected at all times. Do not allow objects to come into contact with glass surfaces and do not touch optical elements with your fingers.
Copyright
This manual is the intellectual property of Bosch Security Systems and is protected by copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Note
This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.
More information
For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com
Bosch Security Systems |
Installation Manual |
AM18-Q0601 | v1.0 | 2012.01 |
12 en | Safety |
FlexiDomeHD 1080p IP Camera |
|
|
1.9Copyrights
The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal-- 24-240-75-75-P-138-ISO10646-1" and "Adobe-Helvetica-Bold-R- Normal--12-120-75-75-P-70-ISO10646-1" under the following copyright:
Copyright 1984-1989, 1994 Adobe Systems Incorporated. Copyright 1988, 1994 Digital Equipment Corporation. Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notices appear in all copies and that both those copyright notices and this permission notice appear in supporting documentation, and that the names of Adobe Systems and Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.
This software is based in part on the work of the Independent JPEG Group.
AM18-Q0601 | v1.0 | 2012.01 |
Installation Manual |
Bosch Security Systems |
FlexiDomeHD 1080p IP Camera |
Introduction | en 13 |
|
|
2Introduction
2.1Features
The FlexiDomeHD 1080p IP Day/Night camera is a highperformance, surveillance color camera.
The camera uses H.264 compression technology to give clear images while reducing bandwidth and storage requirements. It is also ONVIF compliant to improve compatibility during system integration. The camera operates as a network video server and transmits video and control signals over data networks, such as Ethernet LANs and the Internet. The camera is easy to install and ready to use. Features include:
–Progressive scan 1/2.7-inch CMOS HD sensor
–True Day/Night performance with switchable IR filter
–Automatic motorized back focus adjustment
–Quad-streaming
–MicroSD card slot
–ONVIF conformant
–Two-way audio and audio alarm
–Alarm input and alarm output to external devices
–Adaptive dynamic noise reduction
–Enhanced video motion detection
–Video and data transmission over IP data networks
–Multicast function
–Integrated Ethernet interface (10/100 Base-T)
–Power-over-Ethernet (PoE)
–Password protection
–Integrated Web server for live viewing and configuration via a browser
–Firmware update through flash memory
Bosch Security Systems |
Installation Manual |
AM18-Q0601 | v1.0 | 2012.01 |
14 en | System Information |
FlexiDomeHD 1080p IP Camera |
|
|
3System Information
3.1Overview of functions
The camera incorporates a network video server. Its primary function is to encode video and control data for transmission over an IP network. With its H.264 encoding, it is ideally suited for IP communication and for remote access to digital video recorders and IP systems. The use of existing networks means that integration with CCTV systems or local networks can be achieved quickly and easily. Video images from a single camera can be simultaneously received on several receivers.
3.1.1Progressive scan
The camera captures and processes progressively scanned images. When there is fast motion in a scene, progressively scanned images are generally sharper than interlaced images.
3.1.2Day/Night function
In night mode, the camera enhances low light viewing by switching the IR (infrared) filter out of the optical path and providing a monochrome image. The camera can switch from color to monochrome mode automatically by sensing the illumination level, manually via the alarm input, or remotely via a web browser.
3.1.3Quad-streaming
Quad-streaming enables the camera to deliver three H.264 streams (a HD stream, a downscaled resolution stream, and a HD I-frame only stream) together with an M-JPEG stream. These four streams facilitate bandwidth-efficient viewing and recording options as well as integration with third-party video management systems.
3.1.4ONVIF (Open Network Video Interface Forum)
The camera complies to the ONVIF standard which means that it is easier to install and integrate into larger systems. The
AM18-Q0601 | v1.0 | 2012.01 |
Installation Manual |
Bosch Security Systems |
FlexiDomeHD 1080p IP Camera |
System Information | en 15 |
|
|
ONVIF standard is a global standard for the interface of network video products.
3.1.5Audio
Two-way duplex audio is available in the unit for live voice communications or audio recording.
3.1.6Alarm I/O
The alarm input can be used to control the functionality of the unit. An alarm output can control external devices.
3.1.7Tamper detection and motion detection
The camera offers a wide range of configuration options for alarm signaling in the event of tampering with the camera. A Motion+ algorithm for detecting movement in the video image is included.
3.1.8Video encoding
The camera uses the H.264 compression standards. Thanks to efficient encoding, the data rate remains low even with high image quality and can also be adapted to local conditions within wide limits.
3.1.9Multicast
In suitably configured networks, the multicast function enables simultaneous, real time transmission to multiple receivers. The prerequisite for this is that the UDP and IGMP V2/V3 protocols are implemented on the network.
3.1.10Power-over-Ethernet
Power for the camera can be supplied via a Power-over- Ethernet compliant network cable connection. With this configuration, only a single cable connection is required to view, power, and control the camera.
3.1.11Data interface
An external communications port with RS485/RS422/RS232 is available to provide data to external devices, such as pan and tilt heads, for full PTZ control via the Ethernet interface.
Bosch Security Systems |
Installation Manual |
AM18-Q0601 | v1.0 | 2012.01 |
Loading...