PowerFresh™ Steam Mop
USER'S GUIDE
1440-J SERIES
2Thank You
3Safety Instructions
4Product View
5Assembly
6Special Features
7-9 Operations
9 Maintenance and Care
10 Troubleshooting
10Replacement Parts & Additional Accessories
11Warranty
12Product Registration
12 Consumer Care
Thanks for buying a BISSELL PowerFresh™ Steam Mop
We’re glad you purchased a BISSELL PowerFresh™ Steam Mop. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your BISSELL PowerFresh Steam Mop is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL PowerFresh Steam Mop.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman & CEO
2 w w w . b i s s e l l . c o m
IMPORTANTSAFETYINSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions before using your PowerFresh™ Steam Mop.
Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
WARNING:
To reduce the risk of fire, electric shock, or injury:
■Use indoors only
■Do not immerse
■Use only on surfaces moistened by cleaning process
■Do not leave machine when it is plugged in
■Do not service machine when it is plugged in
■If the supply cord is damaged, it must
be replaced by the manufacturer or its service agent in order to avoid a hazard
■Do not use machine if it has been dropped, damaged, left outdoors or dropped into water
■Do not expose to rain, store indoors
■Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces
■Do not carry the appliance while in use
■Do not unplug by pulling on cord; unplug by grasping plug not the cord
■Do not handle plug or appliance with wet hands
■Do not put any object into appliance openings, use with blocked opening or restrict air flow
■Do not expose hair, loose clothing, fingers or body parts to openings or moving parts
■Do not pick up hot or burning objects
■Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours
■Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours
■Remove plug from electrical outlet after use and before cleaning or maintaining the appliance
■Not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
■Children should be supervised to ensure that they do not play with the appliance
■Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.)
■Do not modify the Earthed plug
■Do not allow to be used as a toy
■Do not use for any purpose other than described in this User’s Guide
■Use only manufacturer’s recommended attachments
■Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage
■Keep openings free of dust, lint, hair, etc.
■Keep appliance on a level surface
■Turn off all controls before unplugging
■Be extra careful when cleaning stairs
■Liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens.
■Pay close attention when working around children
SAVE THESE INSTRUCTIONS.
This model is for household use only.
WARNING: This
appliance must be Earthed.
The symbol 
means WARNING: Danger of scalding.
Surface may be hot. Avoid contact.
IMPORTANT FOR
OPERATION ON A 220-240 VOLT A.C. 50/60 Hz POWER SUPPLY ONLY.
If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse
is fitted in the carrier contained in the plug. Spares may be obtained from your BISSELL supplier. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket.
3
w w w . b i s s e l l . c o m
Product view
Optional Accessories:
Washable Microfiber
Mop Pads with
Microban®
Antibacterial Product
Protection (2-pack)
Removable &
Washable Easy
Scrubber
Carpet Refresher
Attachment
Spring Breeze
Fragrance Discs
Replacement
Pack (2-pack)
Water Tank
Water Filter
Replacement
Removable Water
Tank With Replaceable
Water Filter
Steam-on-Demand
Trigger
Strain Reliever
Handle™
Quick Release™
Cord Wrap
Removable
Water Tank
Lower Cord
Wrap
Smart Set™
Steam Control
Manoeuvrable
Swivel
Removable Easy
Scrubber™
Low Profile,
Edge-Cleaning
Mop Head
4 w w w . b i s s e l l . c o m
Assembly
Your PowerFresh™ Steam Mop assembles quickly and easily. It is packaged with the following items:
Handle Assembly with one screw Lower Body
Manoeuvrable Mop Head
Removable Water Tank
(Comes With Replaceable Water Filter on Select Models)
Removable Easy Scrubber (Attached to Mop Head)
2 - PowerFresh™ Steam Mop Pads
2 - Spring Breeze Fragrance Discs
1.Attach lower body to mop head by snapping it into place.
2.Slide handle assembly down and screw until tightened.
PowerFresh Steam Mop assembly is now complete.
Handle Assembly
Lower Body
Manoeuvrable Mop Head
OR
Removable Water Tank
With Replaceable Water Filter
(Select Models Only)
2 PowerFresh
Steam Mop Pads
1 |
2 |
|
|
|
|
5
w w w . b i s s e l l . c o m
Special features
Water Tank (With Replaceable Water Filter on Select Models)
The water tank is located on the top of the PowerFresh™ Steam Mop. It can be refilled with water any time during use. Distilled or demineralized water is recommended. On select models, this tank is connected to a removable, replaceable water filter that prolongs the life of your steam mop by filtering out tap water minerals.
Do not use chemicals in the water tank of your PowerFresh Steam Mop.
Steam-On-Demand Trigger
The steam trigger allows you to release steam when and where you need it for more targeted cleaning.
SmartSet™ Steam Control
(Low, Medium, High)
SmartSet™ Steam Control indicator light will stop blinking when PowerFresh™ Steam Mop is ready to use. Then press the Steam Level button to choose the level of steam you desire.
Microfibre Mop Pads with Microban®
Antibacterial Protection
Reusable microfibre mop pads are machine washable and safe for virtually all hard floor surfaces. Your PowerFresh may have come with two different pads. The white microfibre pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. The gray and white striped pad can be used for scrubbing heavily soiled floors and cleaning tougher messes. These steam mop pads contain built-in Microban® antibacterial protection that helps prevent the growth of 99.9%
of harmful bacteria on the pad surface to help keep your pads fresher and cleaner between uses.
Removable Easy Scrubber
Quickly clean sticky messes by pressing the Easy Scrubber with your foot and locking it into position. Clean grout and crevices easily with this tool.
Carpet Refresher Attachment
Refresh carpets with steam.
OR
Tip:
Do not attempt to use your PowerFresh Steam Mop without water in the tank. You may hear a knocking sound indicating there is no water.
6 w w w . b i s s e l l . c o m
Operations
Getting ready
The mop pad may have already come attached to the mop head, if not follow steps 1A and 1B below.
1.Add Freshening Disc and Attach Mop Pad
A.Insert Spring Breeze Freshening Disc into pocket inside mop pad. Use the whole disc for a refreshing scent or cut in half for a lighter scent.
B.Set mop head in mop pad, making sure quick-grip release tab is located on the back.
2.For tank with filter
Fill the water tank
A.Remove tank by lifting straight up and away from unit.
B.Press down on the Filter Release Button and slide filter forward to access Water Tank.
C.Fill tank with water. For best results, water should be at room temperature.
D.Slide Filter back onto the Water Tank until it clicks into place.
E.Replace water tank by gently sliding tank into place and press down firmly.
3.Twist the Quick Release™ cord wrap clockwise to unwrap the power cord completely and plug into a 220-240 Volt outlet as described on the Important Safety Instructions, page 3.
4.SmartSet™ Steam Select Indicator light will glow when PowerFresh Steam Mop is ready to use. Press the Steam Level button to choose the level of steam you desire. Depress the Steam-on-Demand trigger located on the handle to begin steam cleaning.
1A
2A 2B
2D
Tip:
Use of distilled water is recommended to prolong the life of your PowerFresh Steam Mop.
NOTE: Upon first use of the PowerFresh™ Steam Mop or first use after refilling the water tank, the pump may make a "knocking" sound. This is normal and should only last a few seconds.
7
w w w . b i s s e l l . c o m
Operations
Before you clean
Thoroughly sweep or vacuum floor prior to cleaning with the PowerFresh™ Steam Mop.
Cleaning hard floors
Your PowerFresh™ Steam Mop is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your PowerFresh Steam Mop on waxed or some unwaxed floors may result in a diminished glossiness. The PowerFresh Steam Mop is not for use on unsealed wood floors. For best results test in an inconspicuous area and check the care instructions from your flooring manufacturer.
1.Plug the unit in and wait 30 seconds for it to heat up. Choose the level of steam to clean your floor: Low (delicate floors), Medium (regular cleaning), High (durable floors or sticky messes). Begin cleaning by slowly passing the unit over the floor surface.
2.To sanitise an area of your floor, (attack invisible germs and bacteria) place the PowerFresh Steam Mop over the spot for a minimum 15 seconds using continuous steam, but no longer than 20 seconds using continuous steam. For larger areas, overlap swivel head placement.
3.To thoroughly clean dried-on sticky spots place the scrubby pad on the steam mop. Then press and lock the Easy Scrubber brush into place and slowly move the brush over the sticky spot to remove.
4.When the PowerFresh™ Steam Mop stops emitting steam, unplug the unit. Simply remove the water tank, refill, and continue cleaning.
Carpet Refresher Attachment
This accessory is recommended for the refreshing of carpets. Once the steam mop is cradled in the carpet refresher attachment, it will easily glide over the carpet.
NOTE: Always be sure a mop pad is in place before placing in carpet refresher attachment. Only white mop pads should be used with the carpet attachment. Do not use carpet attachment on spots or stains, or glide it over the same spot for no longer than 20 seconds.
Warning:
Never put descaling, alcoholic, or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
Warning:
Tinted plates on foot may get hot while steam mop is in use. Do not touch while hot.
CAUTION:
Exercise extreme care when using the Steam Mop on timber flooring. Ensure the Steam mop is thoroughly tested in an inconspicuous area prior to mopping a large floor area. The Steam Mop generates hot steam, so when depressing the trigger to apply steam, ensure the Steam Mop is moving continuously. The trigger does not need to be depressed at all times. Prolonged application of steam in one area increases the risk of damage to the surface treatment on timber floors. Check with your timber floor treatment application specialist prior to Steam Mop operation. Regular foot traffic and direct sunlight will wear down timber floor surface treatment making it more susceptible to extreme care when using the Steam Mop on timber flooring.
8 w w w . b i s s e l l . c o m
Loading...