H81M-V3
<![endif]>Motherboard
E8800
First Edition
April 2014
Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1)for free by downloading it from http://support.asus.com/download
or
(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
2
Contents |
|
|
|
Safety information....................................................................................................... |
|
4 |
|
About this guide........................................................................................................... |
|
4 |
|
Package contents........................................................................................................ |
|
6 |
|
H81M-V3 specifications summary.............................................................................. |
6 |
||
Chapter 1: |
Product introduction |
|
|
1.1 |
Before you proceed...................................................................................... |
1-1 |
|
1.2 |
Motherboard overview.................................................................................. |
1-2 |
|
1.3 |
Central Processing Unit (CPU).................................................................... |
1-4 |
|
1.4 |
System memory............................................................................................ |
1-7 |
|
1.5 |
Expansion slots........................................................................................... |
1-10 |
|
1.6 |
Headers........................................................................................................ |
|
1-12 |
1.7 |
Connectors.................................................................................................. |
|
1-13 |
1.8 |
Software support......................................................................................... |
1-23 |
|
Chapter 2: |
BIOS information |
|
|
2.1 |
Managing and updating your BIOS............................................................. |
2-1 |
|
2.2 |
BIOS setup program..................................................................................... |
2-5 |
|
2.3 |
My Favorites.................................................................................................. |
|
2-9 |
2.4 |
Main menu................................................................................................... |
|
2-10 |
2.5 |
Ai Tweaker menu......................................................................................... |
2-11 |
|
2.6 |
Advanced menu.......................................................................................... |
2-12 |
|
2.7 |
Monitor menu.............................................................................................. |
2-12 |
|
2.8 |
Boot menu................................................................................................... |
|
2-13 |
2.9 |
Tools menu.................................................................................................. |
|
2-14 |
2.10 |
Exit menu..................................................................................................... |
|
2-14 |
Appendices |
|
|
|
Notices........................................................................................................................ |
|
15 |
|
ASUS contact information........................................................................................ |
17 |
||
3
Safety information
Electrical safety
•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
•Before installing the motherboard and adding components, carefully read all the user guides that came with the package.
•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a qualified service technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
•Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.
•Chapter 2: BIOS information
This chapter discusses changing system settings through the BIOS Setup menus. Detailed descriptions for the BIOS parameters are also provided.
4
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.ASUS websites
The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
2.Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this guide.
DANGER/WARNING: Information to prevent injury to yourself when completing a task.
CAUTION: Information to prevent damage to the components when completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text |
Indicates a menu or an item to select. |
Italics |
Used to emphasize a word or a phrase. |
<Key> |
Keys enclosed in the less-than and greater-than sign |
|
means that you must press the enclosed key. |
|
Example: <Enter> means that you must press the Enter or |
|
Return key. |
<Key1> + <Key2> + <Key3> |
If you must press two or more keys simultaneously, the key |
|
names are linked with a plus sign (+). |
5
Package contents
Check your motherboard package for the following items.
Motherboard |
ASUS H81M-V3 motherboard |
|
|
Cables |
2 x Serial ATA 6.0 Gb/s cables |
|
|
Accessories |
1 x I/O Shield |
|
|
Application DVD |
Support DVD |
|
|
Documentation |
User Guide |
|
|
If any of the above items is damaged or missing, contact your retailer.
H81M-V3 specifications summary
CPU |
LGA1150 socket for 4th Generation and New 4th Generation Intel® CoreTM |
|
i7/i5/i3, Pentium®, and Celeron® Processors |
|
Supports Intel® 22nm CPU |
|
Supports Intel® Turbo Boost Technology 2.0* |
|
* The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. |
|
** Refer to www.asus.com for Intel® CPU support list. |
Chipset |
Intel® H81 Express Chipset |
Memory |
2 x DIMM, max. 16GB, DDR3 1600 / 1333 / 1066 MHz, non-ECC, un- |
|
buffered memory* |
|
Dual-channel memory architecture |
|
Supports Intel® Extreme Memory Profile (XMP) |
|
• Hyper DIMM support is subject to the physical characteristics of individual |
|
CPUs. Please refer to the Memory QVL for details. |
|
• Due to Intel® chipset limitation, DDR3 1600 MHz and higher memory modules on |
|
XMP mode will run at the maximum transfer rate of DDR3 1600 MHz. |
|
• Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List). |
|
• When you install a total memory of 4GB capacity or more, Windows® 32-bit |
|
operating system may only recognize less than 3GB. We recommend a |
|
maximum of 3GB system memory if you are using a Windows® 32-bit operating |
|
system. |
Graphics |
Integrated Graphics Processor |
|
- Intel® HD Graphics support |
Multi-VGA output support: D-SUB, HDMI ports
-Supports D-SUB with max.resolution of 1920 x 1200 @60Hz
-Supports HDMI with max. resolution of 4096 x 2160 @24Hz / 2560 x 1600 @60Hz
Supports Intel® Tru™ 3D/Quick Sync Video/Clear Video HD Technology/
Insider™
Maximum shared memory of 1024 MB
Expansion slots 1 x PCI Express 2.0 x16 slot (@ x16 mode) 1 x PCI Express 2.0 x1 slot
2 x PCI slots
(continued on the next page)
6
H81M-V3 specifications summary
Storage
Audio
LAN
USB
ASUS unique features
Intel® H81 Express Chipset:
-2 x Serial ATA 6.0 Gb/s connectors (gray)
-2 x Serial ATA 3.0 Gb/s connectors (black)
-Supports Intel® Rapid Technology* and Intel® Smart Connect Technology**
*Due to the limitation of Intel® H81 chipset, Intel Rapid® Start Technology can be configured only from the BIOS Setup program.
**The functions will work depending on the CPU installed.
Realtek® ALC887 7.1-channel Audio CODEC
-Supports jack-detection, multi-streaming, front panel jack-retasking
•Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output.
Realtek 8111G PCIe Gigabit LAN controller
Intel® H81 Express Chipset
-ASUS USB 3.0 Boost support
-2 x USB 3.0/2.0 ports at back panel
-8 x USB2.0/1.1 ports (6 ports at midboard, 2 ports at back panel)
ASUS 5X Protection
-ASUS motherboards safeguard your PC with 5X Protection: DIGI+VRM, DRAM Fuse, ESD Guards, High-Quality 5K-Hour Solid Capacitors, and Stainless Steel Back
ASUS Digital Power Design
-Digital Power Control: Digital Power Design for the CPU
-ASUS 4 Phase Power Design
-ASUS CPU power utility
ASUS DRAM Fuse
-Enhanced DRAM overcurrent protection and short circuit damage prevention
ASUS ESD Guards
- Strong ESD protection for extended component lifespan
ASUS High-Quality 5K-Hour Solid Capacitors
- 2.5x Longer lifespan with excellent durability
ASUS Stainless Steel Back I/O
- 3x More durable corrosion-resistant coating
ASUS Exclusive Features
-ASUS EPU
-ASUS USB 3.0 Boost
-ASUS Disk Unlocker featuring 3TB+HDD support
-ASUS Ai Charger
-ASUS GPU Boost
-ASUS AI Suite 3
-ASUS Anti-Surge protection
(continued on the next page)
7
H81M-V3 specifications summary
ASUS unique features
Rear panel I/O ports
Internal connectors
BIOS features
Manageability
Support DVD
Operating System
Support
Form factor
ASUS Quiet Thermal Solution
-ASUS Fanless Design: Stylish Heatsink solution
-ASUS Fan Xpert
ASUS Q-Design
-ASUS Q-Slot
-ASUS EZ DIY
-ASUS CrashFree BIOS 3
-ASUS EZ Flash 2
1 x PS/2 keyboard port (purple)
1 x PS/2 mouse port (green)
2 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
1 x RGB port
1 x HDMI port
1 x LPT port
1 x COM Port
1 x LAN (RJ-45) port
3 x Audio jacks support 8-channel audio output
3 x USB 2.0/1.1 connectors support additional 6 USB 2.0/1.1 ports 2 x SATA 6.0 Gb/s connectors
2 x SATA 3.0 Gb/s connectors
1 x 4-pin CPU fan connector (PWM mode)
1 x 4-pin Chassis fan connector (PWM and DC mode) 1 x Front panel audio connector (AAFP)
1 x 24-pin ATX power connector
1 x 4-pin ATX 12V power connector
1 x S/PDIF out connector
1 x COM connector
1 x TPM Header
1 x Speaker connector
1 x Clear CMOS connector
1 x System panel connector
64 Mb Flash ROM, UEFI BIOS, PnP, DMI v2.0, WfM2.0, SM BIOS v2.7, ACPI v2.0a, SLP3.0, EUP-ready
WfM 2.0, DMI 2.0, WOL by PME, PXE
Drivers
ASUS utilities
EZ Update
Anti-virus software (OEM version)
Windows® 8.1
Windows® 8
Windows® 7
uATX form factor: 9.6”x 7.8” (24.4cm x 19.8cm)
Specifications are subject to change without notice.
8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product introduction |
1 |
|
|
||||||||||||||||
1.1Before you proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
•Hold components by the edges to avoid touching the ICs on them.
•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
ASUS H81M-V3 |
1-1 |
1.2Motherboard overview
Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits.
Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage to motherboard components.
1.2.1Placement direction
When installing the motherboard, place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image.
1.2.2Screw holes
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards the rear of the chassis
H81M-V3
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chapter 1: Product introduction |
||||||||||||||||||||||||||||||||||||||||||
1.2.3Motherboard layout
|
|
1 |
2 |
|
3 |
4 |
3 |
5 |
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
19.8cm(7.8in) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KBMS |
|
|
|
|
|
|
CPU_FAN |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGI |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ATX12V |
|
+VRM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>COM
|
<![if ! IE]> <![endif]>LPT |
|
| <![if ! IE]> <![endif]>VGA |
|
|
|
|
LGA1150 |
| <![if ! IE]> <![endif]>HDMI |
<![if ! IE]> <![endif]>USB3 12 |
|
|
|
ASM |
|
|
1442K |
LAN_USB34 |
CHA_FAN |
|
|
||
|
|
BATTERY |
AUDIO |
COM |
|
|
|
PCIEX16 |
|
RTL |
H81M-V3 |
|
8111G |
|
| <![if ! IE]> <![endif]>240-pin module) |
<![if ! IE]> <![endif]>240-pin module) |
|
2 |
|
| <![if ! IE]> <![endif]>DDR3DIMM A1 (64bit, |
<![if ! IE]> <![endif]>DDR3DIMM B1 (64bit, |
<![if ! IE]> <![endif]>EATXPWR 1 |
||
| <![if ! IE]> <![endif]>24.4cm(9.6in) |
||||
|
|
<![if ! IE]> <![endif]>2 SATA6G |
6 |
|
|
|
<![if ! IE]> <![endif]>SATA6G_ |
|
PCIEX1_1 |
ASM |
|
1083 |
|
Super |
Intel® |
|
I/O |
|
|
PCI1 |
H81 |
BIOS |
|
|
8Mb |
ALC |
|
887-VD2 |
PCI2 |
SPDIF_OUT |
TPM |
CLRTC |
USB56 |
USB910 |
USB1112 |
SPEAKER |
SATA3G_1 SATA3G_2 |
|
|
|
|
|
|
|
|
AAFP |
|
CHASSIS |
|
|
|
|
F_PANEL |
|
15 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
|
|
|
|
|
|
|
|
|
|||
Connectors/Jumpers/Slots/LED |
|
|
|
|
|
|
|
|||
1. |
Serial port connector (10-1 pin COM2) |
|
|
|
|
1-19 |
||||
2. |
ATX power connectors (24-pin ATXPWR, 4-pin ATX12V) |
|
|
1-15 |
||||||
3. |
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) |
|
1-18 |
|||||||
4. |
Intel® LGA1150 CPU socket |
|
|
|
|
|
|
1-4 |
||
5. |
DDR3 DIMM slots |
|
|
|
|
|
|
|
1-7 |
|
6. |
Intel® H81 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~2) |
|
|
1-17 |
||||||
7. |
Intel® H81 Serial ATA 3.0Gb/s connector (7-pin SATA3G_1~2) |
|
|
1-17 |
||||||
8. |
System panel connector (10-1 pin F_PANEL) |
|
|
|
1-21 |
|||||
9. |
Speaker connector (4-pin SPEAKER) |
|
|
|
|
1-19 |
||||
10. |
USB 2.0 connectors (10-1 pin USB56, USB910, USB1112) |
|
|
1-20 |
||||||
11. |
Chassis intrusion connector (4-1 pin CHASSIS) |
|
|
|
1-22 |
|||||
12. |
Clear RTC RAM (2-pin CLRTC) |
|
|
|
|
|
1-12 |
|||
13. |
TPM header (20-1 pin TPM) |
|
|
|
|
|
|
1-16 |
||
14. |
Front panel audio connector (10-1 pin AAFP) |
|
|
|
1-16 |
|||||
15. |
Digital audio connector (4-1 pin SPDIF_OUT) |
|
|
|
1-22 |
|||||
ASUS H81M-V3 |
1-3 |
1.3Central Processing Unit (CPU)
This motherboard comes with a surface mount LGA1150 socket designed for the Intel® 4th/5th generation Core™ i7 / Core™ i5 / Core™ i3, Pentium® , and Celeron® processors.
H81M-V3
H81M-V3 CPU socket LGA1150
Unplug all power cables before installing the CPU.
•Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
•Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1150 socket.
•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.
1-4 |
Chapter 1: Product introduction |
1.3.1Installing the CPU
1
A
B
2 |
3 |
4 |
C |
5 |
|
A
ASUS H81M-V3 |
1-5 |
1.3.2CPU heatsink and fan assembly installation
Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
To install the CPU heatsink and fan assembly
1 |
A |
2 |
|
B
B 
A
3 |
4 |
1-6 |
Chapter 1: Product introduction |
To uninstall the CPU heatsink and fan assembly
1 |
2 |
|
A
B B 
A
1.4System memory
1.4.1Overview
This motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets.
A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption.
<![endif]>DIMM_B1
<![if ! IE]><![endif]>DIMM_A1
H81M-V3
Channel |
Sockets |
|
|
Channel A |
DIMM_A1 |
Channel B |
DIMM_B1 |
H81M-V3 240-pin DDR3 DIMM sockets
ASUS H81M-V3 |
1-7 |
Loading...