Loading...
Version 1.0
Published April 2018
Copyright©2018 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
6 |
1.4 |
I/O Panel |
8 |
Chapter 2 Installation |
10 |
|
2.1 |
Installing the CPU |
11 |
2.2 |
Installing the CPU Fan and Heatsink |
13 |
2.3 |
Installing Memory Modules (DIMM) |
14 |
2.4 |
Expansion Slots (PCI and PCI Express Slots) |
16 |
2.5 |
Jumpers Setup |
17 |
2.6 |
Onboard Headers and Connectors |
18 |
Chapter 3 Software and Utilities Operation |
22 |
|
3.1 |
Installing Drivers |
22 |
3.2 |
ASRock Live Update & APP Shop |
23 |
3.2.1 |
UI Overview |
23 |
3.2.2 |
Apps |
24 |
3.2.3 |
BIOS & Drivers |
27 |
3.2.4 |
Setting |
28 |
Chapter 4 BIOS SETUP UTILITY |
29 |
|
4.1 |
Introduction |
29 |
4.1.1 |
BIOS Menu Bar |
29 |
4.1.2 |
Navigation Keys |
30 |
4.2 |
Main Screen |
31 |
4.3 |
OC Tweaker Screen |
32 |
4.4 |
Advanced Screen |
38 |
4.4.1 |
CPU Configuration |
39 |
4.4.2 |
Chipset Configuration |
40 |
4.4.3 |
ACPI Configuration |
41 |
4.4.4 |
Storage Configuration |
43 |
4.4.5 |
PCIPnP Configuration |
44 |
4.4.6 |
USB Configuration |
45 |
4.5 |
Hardware Health Event Monitoring Screen |
46 |
4.6 |
Boot Screen |
47 |
4.6.1 |
Boot Settings Configuration. |
48 |
4.7 |
Security Screen |
49 |
4.8 |
Exit Screen |
50 |
760GM-HDV
Chapter 1 Introduction
Thank you for purchasing ASRock 760GM-HDV motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the
software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock 760GM-HDV Motherboard (Micro ATX Form Factor)
•ASRock 760GM-HDV Quick Installation Guide
•ASRock 760GM-HDV Support CD
•2 x Serial ATA (SATA) Data Cables (Optional)
•1 x I/O Panel Shield
English
1
English
1.2 Specifications
Platform |
• |
Micro ATX Form Factor |
|
• |
Solid Capacitor design |
CPU |
• |
Supports Socket AM3+ processors |
|
• Supports Socket AM3 processors: AMD PhenomTM II X6 |
|
|
|
/ X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / |
|
|
Sempron processors |
|
• Supports 8-Core CPU |
|
|
• Supports AMD OverDriveTM with ACC feature (Advanced |
|
|
|
Clock Calibration) |
|
• 4 + 1 Power Phase design |
|
|
• Supports CPU up to 125W |
|
|
• AMD LIVE!TM Ready |
|
|
• Supports AMD's Cool 'n' Quiet Technology |
|
|
• FSB 2600 MHz (5.2 GT/s) |
|
|
• Supports Untied Overclocking Technology |
|
|
• Supports Hyper-Transport 3.0 (HT 3.0) Technology |
|
Chipset |
• |
Northbridge: AMD 760G |
|
• |
Southbridge: AMD SB710 |
Memory |
• |
Dual Channel DDR3 Memory Technology |
|
• 2 x DDR3 DIMM Slots |
|
|
• Supports DDR3 1800(OC)/1600(OC)/1333/1066 non-ECC, |
|
|
|
un-buffered memory |
|
• Max. capacity of system memory: 32GB |
|
Expansion |
• |
1 x PCI Express 2.0 x16 Slot (PCIE1: x16 mode) |
Slot |
• |
1 x PCI Express 2.0 x1 Slot |
|
• 1 x PCI Slot |
|
Graphics • Integrated AMD Radeon 3000 Graphics
•DX10 class iGPU, Pixel Shader 4.0
•Max. shared memory 1024MB
•Three graphics output options: D-Sub, DVI-D and HDMI
*DVI-D and HDMI cannot work simultaneously
•Supports HDMI with max. resolution up to 1920x1200 @ 75Hz
2
760GM-HDV
• Supports DVI-D with max. resolution up to 1920x1200 @ 75Hz
• Supports D-Sub with max. resolution up to 2048x1536 @
|
|
60Hz |
|
• Supports HDCP with DVI-D and HDMI Ports |
|
|
• Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback |
|
|
|
with DVI-D Port |
Audio |
• |
7.1 CH HD Audio (Realtek ALC887 Audio Codec) |
|
* To configure 7.1 CH HD Audio, it is required to use an HD |
|
|
front panel audio module and enable the multi-channel audio |
|
|
feature through the audio driver. |
|
|
• |
Supports Surge Protection |
|
• |
ELNA Audio Caps |
LAN |
• |
PCIE x1 Gigabit LAN 10/100/1000 Mb/s |
|
• |
Realtek RTL8111H |
|
• Supports Wake-On-LAN |
|
|
• |
Supports Lightning/ESD Protection |
|
• Supports LAN Cable Detection |
|
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
Rear Panel |
• |
1 x PS/2 Mouse Port |
I/O |
• |
1 x PS/2 Keyboard Port |
|
• 1 x D-Sub Port |
|
|
• 1 x DVI-D Port |
|
|
• 1 x HDMI Port |
|
|
• 4 x USB 2.0 Ports (Supports ESD Protection) |
|
|
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
|
|
LED) |
|
• HD Audio Jacks: Line in / Front Speaker / Microphone |
|
Storage |
• |
4 x SATA2 3.0 Gb/s Connectors, support RAID (RAID 0, |
|
|
RAID 1, RAID 10 and JBOD), NCQ, AHCI and Hot Plug |
English
3
English
Connector |
• |
1 x Chassis Intrusion and Speaker Header |
|
• 1 x CPU Fan Connector (4-pin) |
|
|
• 2 x Chassis Fan Connectors (4-pin) |
|
|
• 1 x 24 pin ATX Power Connector |
|
|
• 1 x 8 pin 12V Power Connector |
|
|
• 1 x Front Panel Audio Connector |
|
|
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports |
|
|
|
ESD Protection) |
BIOS |
• |
AMI Legal BIOS |
Feature |
• |
Supports “Plug and Play” |
|
• ACPI 1.1 Compliance Wake Up Events |
|
|
• |
Supports jumperfree |
|
• |
SMBIOS 2.3.1 Support |
|
• CPU, VCCM, NB Voltage Multi-adjustment |
|
Hardware |
• |
CPU/Chassis temperature sensing |
Monitor |
• |
CPU/Chassis Fan Tachometer |
|
• |
CPU/Chassis Quiet Fan |
|
• CPU/Chassis Fan multi-speed control |
|
|
• |
CASE OPEN detection |
|
• Voltage monitoring: +12V, +5V, +3.3V, Vcore |
|
OS |
• |
Microsoft® Windows® 10 64-bit / 7 32-bit / 7 64-bit |
Certifica- |
• |
FCC, CE |
tions |
• |
ErP/EuP ready (ErP/EuP ready power supply is required) |
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
4
760GM-HDV
1.Whether 1800/1600MHz memory speed is supported depends on the AM3/AM3+ CPU you adopt. If you want to adopt DDR3 1800/1600 memory module on this motherboard, please refer to the memory support list on our website for the compatible memory modules. ASRock website: http://www.asrock.com
2.Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS. For Windows® 64-bit OS with 64-bit CPU, there is no such limitation.
3.This motherboard does not support RAID mode with HDDs of 3TB and above.
English
5
1.3 Motherboard Layout
Keyboard PS2 |
Mouse |
PS2 |
CPU_FAN1 |
|
|
|
|
|
|
|
|
VGA2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S |
module)pin |
|
bit,240-pinmodule) |
|
|
|
|
ATX12V1 |
|
|
|
AM3b OCKET |
|
|
|
||
|
|
|
|
|
|
|
|
|
|||
DVI1 |
|
|
|
|
|
FSB800 |
|
|
|
||
|
|
|
|
|
bit,240- |
|
|
|
|||
HDMI2 |
|
|
|
|
A1(64 |
|
B1(64 |
|
|
||
USB 2.0 |
|
|
|
|
|
DDR3_ |
|
DDR3_ |
ATXPWR1 |
|
|
T: USB2 |
|
|
|
|
|
|
|
||||
B: USB3 |
|
|
|
|
|
|
|
||||
|
|
|
|
RoHS |
AMD |
|
|
|
|||
USB 2.0 |
Top: |
|
|
760G |
|
|
|
|
|
|
|
T: USB0 |
|
|
|
|
|
|
|
|
|||
RJ-45 |
|
|
Chipset |
|
|
|
|
|
|
||
B: USB1 |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|||
MI Bottom: CI N |
FRON Center: T |
LINE Top: IN |
|
|
|
|
|
|
|
SATAII 4(PORT4) |
|
|
|
|
|
|
PCIE1 |
|
|
|
|
|
|
|
|
|
|
|
|
AMD |
|
|
|
CHA_FAN2 |
|
|
|
|
|
PCIE2 |
|
SB710 |
CMOS |
|
|
|
|
|
|
|
|
|
|
SATAII 2(PORT2) |
SATAII 3(PORT3) |
|
HDLED RESET |
||
|
|
|
USB6_7 |
USB4_5 |
|
Chipset |
BATTERY |
|
|||
|
|
|
|
|
|
|
|
||||
|
|
1 |
|
1 |
|
|
|
1 |
|||
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
PANEL 1 |
|||
|
|
|
|
|
|
|
1 |
PWRBTNPLED |
|||
|
|
|
|
|
|
|
CLRMOS1 |
|
|
|
|
|
|
|
|
|
PCI1 |
|
|
|
|
|
|
|
|
HD_AUDIO2 |
|
|
|
SPK_CI1 |
|
|
SATAII_1 (PORT 1) |
|
|
|
|
1 |
|
760GM-HDV |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
CHA_FAN1 |
|
|
|
|
English
6
760GM-HDV
No. Description
1ATX 12V Power Connector (ATX12V1)
2CPU Fan Connector (CPU_FAN1)
3CPU Socket
4CPU Heatsink Retention Module
52 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)
6ATX Power Connector (ATXPWR1)
7SATA2 Connector (SATAII_4 (PORT4))
8Chassis Fan Connector (CHA_FAN2)
9System Panel Header (PANEL1)
10SATA2 Connector (SATAII_3 (PORT3))
11SATA2 Connector (SATAII_2 (PORT2))
12SATA2 Connector (SATAII_1 (PORT1))
13Clear CMOS Jumper (CLRMOS1)
14Chassis Fan Connector (CHA_FAN1)
15Chassis Intrusion and Speaker Header (SPK_CI1)
16USB 2.0 Header (USB4_5)
17USB 2.0 Header (USB6_7)
18Front Panel Audio Header (HD_AUDIO2)
English
7
1.4 I/O Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
1 |
|
|
|
|
|
|
|
|
2 |
|
|
|
4 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11 10 9 8 7 6 5
No. |
Description |
No. |
Description |
1 |
PS/2 Mouse Port |
7 |
USB 2.0 Ports (USB23) |
2 |
LAN RJ-45 Port* |
8 |
HDMI Port |
3 |
Line In (Light Blue)** |
9 |
DVI-D Port |
4 |
Front Speaker (Lime)** |
10 |
D-Sub Port |
5 |
Microphone (Pink)** |
11 |
PS/2 Keyboard Port |
6USB 2.0 Ports (USB01)
*There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED SPEED LED
LAN Port |
|
|
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
||
Status |
|
Description |
|
Status |
|
Description |
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|
|
|
||||
Blinking |
|
Data Activity |
|
Orange |
|
100Mbps connection |
On |
|
Link |
|
Green |
|
1Gbps connection |
English
8
760GM-HDV
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multichannel audio feature through the audio driver.
Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Ports in 7.1-channel Configuration:
Port |
|
Function |
Light Blue (Rear panel) |
|
Rear Speaker Out |
|
||
Lime (Rear panel) |
|
Front Speaker Out |
Pink (Rear panel) |
|
Central /Subwoofer Speaker Out |
Lime (Front panel) |
|
Side Speaker Out |
English
9
Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
10
760GM-HDV
2.1 Installing the CPU
Unplug all power cables before installing the CPU.
1
2
English
11
3
English
12
760GM-HDV
2.2 Installing the CPU Fan and Heatsink
After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Then connect the CPU fan to the CPU FAN connector. For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink.
English
13
Loading...