Anritsu RAS8250B Users Manual
SL101-10
BioCrypto Card
Users Manual
Read this manual before using the equipment. Keep this manual with the equipment.
SL101-10 BioCrypto Card Users Manual
SL101-10
(BioCrypto Card)
Users Manual
1999 November (First Edition)
NEC Corporation
Shiba 5-7-1 Minatoku Tokyo Japan
TEL (03) 3454-1111
Copyright © 1999, NEC CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior written
permission of the publisher.
The contents of this manual may be changed without prior notice.
SL101-10
BioCrypto Card
Users Manual
First Edition
Read this manual before using the equipment.
Keep this manual with the equipment.
i
SL101-10
BioCrypto Card
Users Manual
29 November 1999 (First Edition)
Copyright © 1999, NEC CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior written permission of the publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
ii
WARNING
For Safety
In order to ensure safe usage of the unit and to prevent injury to the
customer and damage to the customer's property, the following symbols
are used in this manual for explanation.
The following symbols classify and explain the degree of hazard or damage if the user disregards the instructions.
WARNING This symbol indicates that improper use of the products may
result in death or serious injury.
CAUTION
Note:
reference:
CAUTION This symbol indicates that improper use of the products may
result in injury or damage to property.
The following symbols explain the possible damage or accidents that can
occur if the user disregards the instructions.
Inflammable Caution
This symbol indicates that there is a possibility of smoke or fire.
Electrical Shock Caution
This symbol indicates that there is a possibility of electrical shock.
Injury Caution
This symbol indicates that there is a possibility of injury.
High Temperature Caution
This symbol indicates that there is a possibility of injury due to high
temperatures.
This manual also uses the following symbols in addition to those above
for explanation.
This symbol explains the actions that must not be performed or things
to be performed with caution. In some cases there is a possibility of
failure of the unit, software used with this unit or the data generated by
the customer.
This symbol explains the actions which should be refereed to.
iii
For Safety
WARNING
Do not touch the unit or perform its installation/uninstallation in the case
of lightning.
There is a danger of electrical shock due to lightning.
The attached CD-ROM should not be used in a player which is not a CDROM drive.
The loud noise may cause ear injury or damage the speaker.
CAUTION
Do not put a metal object or liquid inside the unit.
Inserting metal object or liquid, such as water, inside the unit may cause
electrical shock or fire.
Never disassemble the unit.
Do not disassemble the unit. If it is stored or used in a disassembled
state, it may result in unit breakdown or electrical shock.
Do not touch with wet hands.
When the unit is mounted on the personal computer body, touching the
unit with wet hands may cause an electrical shock.
Do not mount the unit in an incorrect direction on the PC card slot as it
may cause unit failure or fire.
When installing/uninstalling the unit, take care that your fingers are not
caught or injured by the PC card slot
After the unit is used, the temperature of some parts of the unit may be
high. Take care, as the high temperature can cause burns.
In the event of unit failure, the temperature of some unit part may be high.
Be careful, as the high temperature may cause injuries such as burns.
iv
For Safety
Handling Cautions
Do not use or store the unit near a heater or inside the car during summer
when the window is closed and avoid exposure to direct sunlight for a
long period.
This may cause deformation or discoloration.
Do not subject the unit to strong shocks or vibrations such as those due
to dropping.
This may result in unit breakdown or unit failure.
Do not use the unit when there is condensation.
Condensation occurs when the unit is brought into a warm place from a
cold place. This can cause unit malfunctions or failure.
Discharge the static electricity before handling the unit.
This unit can fail due to static electricity. In order to avoid unit failure,
touch a metal object (such as an aluminum sash or a doorknob) to discharge the static electricity before handling the unit.
Do not scratch or pick the fingerprint sensor with a sharp object such as
a ballpoint pen.
A damaged sensor may result in unit failure or degradation of collation
accuracy.
Close the sensor guard after using the unit,.
A damaged sensor may result in unit failure or degradation of collation
accuracy.
Do not place a heavy object on the unit.
This may cause deformation or unit failure.
Do not use a volatile organic solvent, such as thinner or benzine, or a
chemical cloth to clean the unit.
This can cause deformation of the unit or unit failure. To clean the unit,
wipe it with clean dry cloth.
Dismount the unit before moving it.
Failure to do so may cause unit damage or failure.
Use the attached soft case for carrying the unit.
Otherwise, the unit may be damaged or fail.
v
For Safety
Cautions
(1) Copying of the document in part or whole without permission is pro-
hibited.
(2) The contents of this document may be changed without prior notice
in the future.
(3) In no event shall NEC be liable for any damages or charge of loss of
profits out of the use of this product.
(4) This product is not designed to be installed or to control facility or
equipment which are very closely related to human life or which
needs to be highly reliable such as a medical equipment, nuclear
facility or equipment, aerospace equipment or transportation facility
or equipment.
If the unit is used in such facilities, or with such equipment or control
systems, it can cause injury, death or damage to property. NEC will
not be liable for any such damage.
Microsoft and Windows are registered trademarks of the U.S. Microsoft
Corporation in the United States and other countries.
The official name of Windows 98 is Microsoft
®
system Japanese version.
The official name of Windows 95 is Microsoft
®
system.
The official name of Windows NT 4.0 is Microsoft
®
ating System Version 4.0 or Microsoft
Windows NT
Operating System Version 4.0.
Windows
Windows
®
®
®
Windows NT
®
Server Network
98 operating
95 operating
®
Oper-
BIOS LOCK uses the technology provided by U.S. Phoenix Technologies Corporation Secure Agent™, and was jointly developed based on
the technical cooperation with NEC and U.S. Phoenix Technologies Corporation.
SecureFinger is a generic name for NEC fingerprint authentication products.
SecureFinger is a trademark of NEC Corp.
Other company names and product names printed in this manual are
trademarks or registered trademarks of their respective company.
vi
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this
manual, meets FCC requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied
with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this
product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a reasonable level of assurance
that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses
radio frequencies and, if not installed and used according to the instructions
found in the users manual, may cause interference harmful to the operation of
other electronic devices. Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If this product is found to be
the source of interference, which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are or different branch (circuit breaker or fuse) circuits
or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the an-
tenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact
the local retailer authorized to distribute this type of product. If you can not
locate the appropriate retailer, please contact Yamaha Corporation of America,
Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620.
The above statements apply ONLY to those products distributed by Yamaha
Corporation of America or its subsidiaries.
Notes On Export Management
This product and its manuals may require an Export License/Approval
by the Government of the product's country of origin for re-export from
your country.
Before re-exporting the product or manuals, please contact us to
confirm whether they are export-controlled items or not.
vii
Loading...