COLOUR TELEVISION
INSTRUCTIONS
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
AV-14KG11
AV-14KG21
AV-14UG11
Contents |
|
|
Safety precautions |
|
2 |
Preparation |
|
3 |
1 Confirm which remote control you have ...... |
3 |
|
2 Inserting the batteries ..................................... |
|
3 |
3 Connecting the aerial and external devices ... |
4 |
|
4 Connecting the power cord ........................ |
|
6 |
5 SETUP TOUR .............................................. |
|
6 |
Basic operation |
|
7 |
Remote control buttons and functions |
8 |
|
PICTURE MODE button ................................. |
|
8 |
COLOUR SYSTEM button ............................. |
|
8 |
SOUND SYSTEM button ............................... |
|
8 |
DISPLAY button ............................................. |
|
9 |
RETURN + button .......................................... |
|
9 |
CHANNEL SCAN button ................................ |
|
9 |
MUTING button ............................................. |
|
9 |
OFF TIMER button ......................................... |
|
9 |
Viewing teletext programmes 10, 11 |
||
Using the TV’s menus |
|
12 |
Basic operation ............................................ |
|
12 |
ON TIMER ..................................................... |
|
13 |
INPUT ........................................................... |
|
13 |
VNR ............................................................... |
|
13 |
AUTO SHUTOFF .......................................... |
|
14 |
CHILD LOCK ................................................. |
|
14 |
BLUE BACK .................................................. |
|
14 |
Picture Adjustments .................................... |
|
15 |
SETUP TOUR ............................................... |
|
15 |
AUTO CH PRESET ....................................... |
|
15 |
MANUAL CH PRESET .................................. |
|
16 |
SKIP .............................................................. |
|
17 |
LANGUAGE .................................................. |
|
17 |
TEXT (Teletext Language) ........................... |
|
17 |
Using the buttons on the TV |
18 |
|
Troubleshooting |
|
19 |
Specifications |
Back cover |
LCT1411-001A
WARNING
• To prevent fire or shock hazard, do not expose the TV to rain or moisture.
CAUTION
•Operate only from the power source indicated on the rear of the TV.
•Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord.
•Never block or cover the cabinet openings for ventilation. Never install the TV where good ventilation is unattainable. When installing
this TV, leave spaces for ventilation around the TV more than the minimum distances shown in the diagram.
•Do not allow objects or liquid into the cabinet openings.
•In the event of a fault, unplug the TV and call a service technician. Do not attempt to repair it by yourself or remove the rear cover.
•The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
•When you don’t use this TV for a long period of time, be sure to unplug it.
2
1 Confirm which remote control you have
Your TV comes with one of the two remote controls shown below. Functions you can operate differ depending on the type of remote control.
|
RM-C91 |
RM-C360GY |
|||||
|
|
|
POWER |
|
|
POWER |
|
|
|
|
|
|
|
|
|
SYSTEM |
|
|
SYSTEM |
|
PICTURE |
||
|
|
COLOUR |
SOUND |
|
MODE |
||
COLOUR SOUND MUTING |
|
|
|||||
|
|
|
|
|
|||
DISPLAY |
|
|
TV/TEXT |
TV/VIDEO |
1 |
2 |
3 |
|
|
|
|
|
|
||
|
|
|
|
|
4 |
5 |
6 |
|
MENU |
|
OFF |
7 |
8 |
9 |
|
|
|
|
|
TIMER |
|||
|
|
|
|
CHANNEL |
RETURN+ |
0 |
-/-- |
|
|
|
|
SCAN |
|||
TV/VIDEO |
1 |
2 |
3 |
|
|
|
|
OFF |
DISPLAY |
|
|
MUTING |
|||
|
|
|
|
|
|
|
|
TIMER |
4 |
5 |
6 |
|
|
|
|
PICTURE |
|
MENU |
|
|
|||
|
|
|
|
|
|
||
MODE |
7 |
8 |
9 |
|
|
|
|
CHANNEL |
|
|
|
|
|||
RETURN+ |
|
|
CHANNEL |
VOLUME |
|||
SCAN |
|
0 |
-/-- |
||||
|
|
|
|
|
|
||
CHANNEL |
VOLUME |
|
|
|
|
||
|
|
|
|
|
REMOTE CONTROL UNIT |
||
|
|
|
|
|
RM-C360GY |
|
|
|
TEXT |
|
|
|
|
|
|
REVEAL |
HOLD |
INDEX |
SIZE |
|
|
|
|
SUBPAGE |
|
CANCEL |
|
|
|
|
|
|
RM-C91 |
TV |
|
|
|
|
2 Inserting the batteries
Correctly insert two batteries, observing the , and
. polarities and inserting the . end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new batteries.
The supplied batteries are for testing, not regular use.
3
Preparation
3Connecting the aerial and external devices
•For further details, refer to the manuals provided with the devices you are connecting.
•Connecting cables are not supplied.
•The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording).
■Connecting the aerial and VCR
Connecting the aerial
To install rod aerial:
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VHF/UHF outdoor aerial |
Indoor aerial |
Rod aerial
Matching aerial
adapter Aerial holder
(supplied)
VIDEO AUDIO
IN
OUT
(1)
(2)
(3)
Illustration of AV-14KG11/AV-14KG21
Connecting the aerial and VCR
VHF/UHF outdoor aerial
2
VIDEO |
AUDIO |
|
IN |
|
OUT |
|
|
3 |
To RF |
To video |
To audio |
output |
output |
output |
1To aerial input
VCR
Illustration of AV-14KG11/AV-14KG21
4
Preparation
■Connecting other external devices
VIDEO AUDIO
IN
OUT
To audio |
To video |
output |
output |
VCR (for playing)
VCR (for recording)
To audio |
To video |
input |
input |
Illustration of AV-14KG11/AV-14KG21
To video
output Camcorder
To audio |
or |
|
TV game |
||
output |
VIDEO IN AUDIO
Headphones
Illustration of AV-14KG11/AV-14KG21
•Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.
5
Preparation
4 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
5 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. •In case of resetting that the reason for such as removal, you can set the SETUP TOUR
function on the “MENU 3” menu. For details, see page 15.
1Press the Main power button on the TV.
The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.
2Press the MENU / buttons to select the on-screen language.
3Press the MENU y button.
Selecting English or Russian onscreen language:
The AUTO PROGRAMMING function will start and the indicator blinks.
Selecting Arabic or Persian onscreen language:
The “TEXT LANGUAGE” is displayed.
1Press the MENU / buttons to select the teletext language.
2Press the MENU y button.
The AUTO PROGRAMMING function will start and the indicator blinks.
• To stop the AUTO PROGRAMMING function, press the MENU / buttons.
When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO PROGRAMMING function operation is completed.
|
• If a TV channel you want to view is |
|
not set to the channel, set it with the |
|
MANUAL CH PRESET function. |
6 |
For details, see page 16. |
|
ON TIMER POWER
|
POWER lamp |
Main power button |
|
|
SYSTEM |
|
|
|
COLOUR SOUND MUTING |
|
|
DISPLAY |
|
|
|
button |
DISPLAY |
TV/TEXT |
|
|
|
|
|
|
|
MENU |
MENU t |
MENU |
|
buttons |
|
|
|
||
buttons |
|
|
|
|
TV/VIDEO |
|
|
|
1 |
2 |
3 |
|
OFF |
|
|
|
TIMER |
|
|
SETUP TOUR
h
SETUP TOUR
LANGUAGE
ENGLISH
NEXT |
|
|
EXIT BY |
OPERATE BY -+ |
DISPLAY |
h
SETUP TOUR
Select Arabic or Persian, then press y button, the Teletext language is displayed. To view a Farsi Teletext programme, select Farsi language.
Press y button to start the AUTO PROGRAMMING function.
NOW PROGRAMMING
STOP BY -+