Friedrich MW09Y3FM User Manual

Size:
696.34 Kb
Download

OPERATING MANUAL

MODE D’EMPLOI

MANUAL DE FUNCIONAMIENTO

INVERTER

HEAT & COOLING MODEL (REVERSE CYCLE)

ROOM AIR CONDITIONER

MULTI SPLIT TYPE

Indoor Unit

MW09Y3FM

MW12Y3FM

MW18Y3FM

Outdoor Unit

MR24DY3F

MR36TQY3F

KEEP THIS MANUAL FOR FUTURE REFERENCE

CONSERVEZ CE MODE D'EMPLOI AFIN DE POUVOIR VOUS Y RÉFÉRER ULTÉRIEUREMENT GUARDE ESTE MANUAL PARA PODERLO CONSULTAR EN EL FUTURO

Español Français English

P/N9373420040

Fig. 1

 

E

1

 

 

 

 

 

 

 

 

 

 

2

 

9

 

 

 

 

=

 

 

 

 

1

Fig. 2

 

 

 

 

 

 

 

 

3

 

 

A

3

OPERATION

TIMER

SUPER QUIET COIL DRY

 

D

5

6

4 7 8

B

 

C

 

Fig. 3

 

 

 

 

9

 

 

Fig. 4

Fig. 5

J

 

 

 

T

 

 

 

 

 

 

Z

U

 

 

 

G

M

W

Y

 

 

 

N

 

]

 

H

 

 

[

X

I

O

\

 

 

 

 

F

P

 

V

K

 

 

 

 

 

S

Q

 

 

L

R

Fig. 6

To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in actral operation, however, the display will only show those indicators appropriate to the current operation.

CONTENTS

....................................SAFETY PRECAUTIONS

En-1

ADJUSTING THE DIRECTION OF

 

FEATURES AND FUNCTIONS ...........................

En-2

AIR CIRCULATION ..............................................

En-9

NAME OF PARTS ................................................

En-3

SWING OPERATION .........................................

En-10

PREPARATION ....................................................

En-4

COIL DRY OPERATION .....................................

En-10

OPERATION ........................................................

En-5

MANUAL AUTO OPERATION ..........................

En-10

TIMER OPERATION ............................................

En-7

CLEANING AND CARE .....................................

En-11

SLEEP TIMER OPERATION ................................

En-8

TROUBLESHOOTING .......................................

En-13

 

 

OPERATING TIPS ..............................................

En-14

 

 

 

 

SAFETY PRECAUTIONS

DANGER!

CAUTION!

Do not attempt to install this air conditioner by yourself.

This unit contains no user-serviceableparts. Always consult authorized service personnel for repairs.

When moving, consult authorized service personnel for disconnection and installation of the unit.

Do not become excessively chilled by staying for lengthy periods in the direct cooling airflow.

Do not insert fingers or objects into the outlet port or intake grilles.

Do not start and stop air conditioner operation by disconnecting the power supply cord and so on.

Take care not to damage the power supply cord.

In the event of a malfunction (burning smell, etc.), immediately stop operation, disconnect the power supply plug, and consult authorized service personnel.

If the power supply cord of this appliance is damaged, it should only be replaced by the authorized service personal, since special purpose tools and specified cord are required.

Provide occasional ventilation during use.

Do not direct air flow at fireplaces or heating apparatus.

Do not climb on, or place objects on, the air conditioner.

Do not hang objects from the indoor unit.

Do not set flower vases or water containers on top of air conditioners.

Do not expose the air conditioner directly to water.

Do not operate the air conditioner with wet hands.

Do not pull power supply cord.

Turn off power source when not using the unit for extended periods.

Check the condition of the installation stand for damage.

Do not place animals or plants in the direct path of the air flow.

Do not drink the water drained from the air conditioner.

Do not use in applications involving the storage of foods, plants or animals, precision equipment, or art works.

Connection valves become hot during Heating; handle with care.

Do not apply any heavy pressure to radiator fins.

Operate only with air filters installed.

Do not block or cover the intake grille and outlet port.

Ensure that any electronic equipment is at least one metre away from either the indoor or outdoor units.

Avoid installing the air conditioner near a fireplace or other heating apparatus.

When installing the indoor and outdoor units, take precautions to prevent access by infants.

Do not use inflammable gases near the air conditioner.

En-1

FEATURES AND FUNCTIONS

INVERTER

At the start of operation, a large power is used to bring the room quickly to the desired temperature. Afterwards, the unit automatically switches to a low power setting for economic and comfortable operation.

COIL DRY OPERATION

The Indoor unit can be dried by pressing the COIL DRY button on the Remote Control Unit so as to avoid going moldy and restrain the breed of bacterium.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched automatically to maintain the set temperature, and the temperature is kept constant at all times.

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON timer operations in a single sequence. The sequence can involve one transition from OFF timer to ON timer, or from ON timer to OFF timer, within a twenty-fourhour period.

SLEEP TIMER

When the SLEEP button is pressed during Heating mode, the air conditioner’s thermostat setting is gradually lowered during the period of operation; during cooling mode, the thermostat setting is gradually raised during the period of operation. When the set time is reached, the unit automatically turns off.

WIRELESS REMOTE CONTROL UNIT

The Wireless Remote Control Unit allows convenient control of air conditioner operation.

SWING OPERATION

The Air Flow Direction Louvers swings automatically up and down so that the air speeds to every nook and corner of your room.

REMOVABLE OPEN PANEL

The indoor unit’s Open Panel can be removed for easy cleaning and maintenance.

MILDEW-RESISTANTFILTER

The AIR FILTER has been treated to resist mildew growth, thus allowing cleaner use and easier care.

SUPER QUIET OPERATION

When the FAN CONTROL button is used to select QUIET, the unit begins super-quietoperation; the indoor unit’s airflow is reduced to produce quieter operation.

POLYPHENOL CATECHIN AIR CLEANING FILTER

The polyphenol catechin air cleaning filter uses static electricity to clean the air of fine particles and dust such as tobacco smoke and plant pollen that are too small to see.

The filter contains catechin, which is highly effective against various bacteria by suppressing the growth of the bacteria adsorbed by the filter.

Note that when the air cleaning filter is installed, the amount of air produced decreases, causing a slight decrease in the air conditioner's performance.

NEGATIVE AIR IONS DEODORIZING FILTER

It comprises pottery super micro particles, which can produce negative air ions having the effect of deodorizing and can absorb and remit the peculiar smell at home.

En-2

NAME OF PARTS

Fig. 1 Indoor Unit

1 Operating Control Panel (Fig. 2)

2MANUAL AUTO button

When kept on pressing the MANUAL AUTO button for more than 10 seconds, the forced cooling operation will start.

The forced cooling operation is used at the time of installation.

Only for authorized service personnel's use.

When the forced cooling operation starts by any chance, press the START/STOP button to stop the operation.

3 Indicator (Fig. 3)

4 Remote Control Signal Receiver

5 OPERATION Indicator Lamp (red)

6TIMER Indicator Lamp (green)

If the TIMER indicator lamp flashes when the timer is operating, it indicates that a fault has occurred with the timer setting (See Page 15 Auto Restart).

7 SUPER QUIET Indicator Lamp (green)

8 COIL DRY Indicator Lamp (orange)

9 Intake Grille (Fig. 4)

0 Front Panel

A Air Filter

B Air Flow Direction Louver

CRight-LeftLouver

(behind Air Flow Direction Louver)

D Drain Hose

EAir Cleaning Filter

Refer to the folded out page on the cover.

Fig. 5 Remote Control Unit

F SLEEP button

G MASTER CONTROL button

H SET TEMP. button (

/ )

I COIL DRY button

 

J Signal Transmitter

 

K TIMER MODE button

L TIMER SET ( /

) button

M FAN CONTROL button

N START/STOP button

O SET button

P SWING button

Q RESET button

RTEST RUN button

This button is used when installing the conditioner, and should not be used under normal conditions, as it will cause the air conditioner’s thermostat function to operate incorrectly.

If this button is pressed during normal operation, the unit will switch to test operation mode, and the Indoor Unit’s OPERATION Indicator Lamp and TIMER Indicator Lamp will begin to flash simultaneously.

To stop the test operation mode, press the START/STOP button to stop the air conditioner.

S CLOCK ADJUST button

T Remote Control Unit Display (Fig. 6)U Transmit Indicator

V Clock Display

W Operating Mode DisplayX Timer Mode Display

Y Fan Speed Display

Z Temperature SET Display[ COIL DRY Display

\ SLEEP Display

] SWING Display

En-3

PREPARATION

Turn on the Power

1

In the case of a direct line connection, turn on the cir-

cuit breaker.

 

 

 

 

Load Batteries (AAA/R03/LR03 × 2)

 

1

Press and slide the battery compartment lid on the re-

verse side to open it.

 

 

 

 

 

Slide in the direction of the arrow while pressing the mark.

2

Insert batteries.

 

 

 

 

Be sure to align the battery polarities (

) correctly.

3

Close the battery compartment lid.

Set the Current time

 

 

 

 

1

Press the CLOCK ADJUST button (Fig. 5 S).

Use the tip of a ball-pointpen or other small object to press the button.

2

Use the TIMER SET (

/

 

 

) buttons (Fig. 5 K) to

 

 

adjust the clock to the current time.

 

 

 

button: Press to advance the time.

 

 

 

 

button: Press to reverse the time.

 

 

 

 

 

 

(Each time the buttons are pressed, the time will be advanced/reversed in

 

one-minuteincrements; hold the buttons depressed to change the time

 

quickly in ten-minuteincrements.)

 

 

 

 

3

Press the CLOCK ADJUST button (Fig. 5 S) again.

This completes the time setting and starts the clock.

To Use the Remote Control Unit

The Remote Control Unit must be pointed at signal receiver (Fig. 1 4) to operate correctly.

Operating Range: About 7 meters.

When a signal is properly received by the air conditioner, a beeping sound will be heard.

If no beep is heard, press the Remote Control Unit button again.

Remote Control Unit Holder

Insert

Slide up

Press in

Pull out

Screws

 

1 Mount the Holder.2 Set the Remote Control

3 To remove the Remote

Unit.

Control Unit (when use at

 

hand).

CAUTION!

Take care to prevent infants from accidentally swallowing batteries.

When not using the Remote Control Unit for an extended period, remove the batteries to avoid possible leakage and damage to the unit.

If leaking battery fluid comes in contact with your skin, eyes, or mouth, immediately wash with copious amounts of water, and consult your physician.

Dead batteries should be removed immediately and disposed of properly, either in a battery collection receptacle or to the appropriate authority.

Do not attempt to recharge dry batteries.

Never mix new and used batteries, or batteries of different types.

Batteries should last about one year under normal use. If the Remote Control Unit’s operating range becomes appreciably reduced, replace the batteries and press the RESET button with the tip of a ballpoint pen or other small object.

En-4

OPERATION

To Select Mode Operation

1

Press the START/STOP button (Fig. 5 N).

The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.

 

The air conditioner will start operating.

2

Press the MASTER CONTROL button (Fig. 5 G) to se-

lect the desired mode.

Each time the button is pressed, the mode will change in the following order.

sAUTOs COOL

s DRY

HEAT t

FAN t

About three seconds later, the entire display will reappear.

To Set the Thermostat

Press the SET TEMP. button (Fig. 5 H).

button: Press to raise the thermostat setting. button: Press to lower the thermostat setting.

Thermostat setting range:

AUTO ..................................

64°F to 88 °F

Heating ...............................

60°F to 88 °F

Cooling/Dry ........................

64°F to 88 °F

The thermostat cannot be used to set room temperature during the FAN mode (the temperature will not appear on the Remote Control Unit’s Display).

About three seconds later, the entire display will reappear.

The thermostat setting should be considered a standard value, and may differ somewhat from the actual room temperature.

Example: When set to COOL.

Example: When set to 80 °F.

To Set the Fan Speed

Press the FAN CONTROL button (Fig. 5 M).

Each time the button is pressed, the fan speed changes in the following order:

sAUTO

sHIGH

s MED

sLOW

sQUIET

About three seconds later, the entire display will reappear.

When set to AUTO:

 

 

 

 

Heating

: Fan operates so as to optimally circulate warmed air.

 

 

 

 

 

However, the fan will operate at very low speed when the temperature

 

 

 

 

 

of the air issued from the indoor unit is low.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cooling

: As the room temperature approaches that of the thermostat setting,

 

 

 

 

 

 

 

 

 

the fan speed becomes slower.

 

 

 

 

Fan

: The fan runs at the low fan speed.

 

 

 

 

Example: When set to AUTO.

 

 

The fan will operate at a very low setting during Monitor operation and at the start of the Heating mode.

SUPER QUIET Operation

SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for quieter operation.

SUPER QUIET operation cannot be used during Dry mode. (The same is true when dry mode is selected during AUTO mode operation.)

During Super Quiet operation, Heating and Cooling performance will be reduced somewhat. If the room does not warm up/ cool down when using SUPER QUIET Operation, please adjust the air conditioner’s Fan Speed.

En-5

To Stop Operation

Press the START/STOP button (Fig. 5 N).

The OPERATION Indicator Lamp (red) (Fig. 3 5) will go out.

About AUTO CHANGEOVER Operation

AUTO: ● When AUTO CHANGEOVER operation first selected, the fan will operate at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode.

If the differance between thermostat setting and actual room temperature is more than +4 °F → Cooling or dry operation

If the difference between thermostat setting and actual room temperature is within ±4 °F → Monitor operation

If the difference between thermostat setting and actual room temperature is more than –4°F → Heating operation

When the air conditioner has adjusted your room’s temperature to near the thermostat setting, it will begin monitor operation. In the monitor operation mode, the fan will operate at low speed. If the room temperature subsequently changes, the air conditioner will once again select the appropriate operation (Heating, Cooling) to adjust the temperature to the value set in the thermostat.

(The monitor operation range is ±4 °F relative to the thermostat setting.)

If the mode automatically selected by the unit is not what you wish, select one of the mode operation (HEAT, COOL, DRY, FAN).

About Mode Operation

Heating: ● Use to warm your room.

When Heating mode is selected, the air conditioner will operate at very low fan speed for about 3 to 5 minutes, after which it will switch to the selected fan setting. This period of time is provided to allow the indoor unit to warm up before begin full operation.

When the room temperature is very low, frost may form on the outside unit, and its performance may be reduced. In order to remove such frost, the unit will automatically enter the defrost cycle from time to time. During Automatic Defrosting operation, the OPERATION Indicator Lamp (Fig. 3 5) will flash, and the heat operation will be interrupted.

Cooling: ● Use to cool your room.

Dry: ● Use for gently cooling while dehumidifying your room.

You cannot heat the room during Dry mode.

During Dry mode, the unit will operate at low speed; in order to adjust room humidity, the indoor unit’s fan may stop from time to time. Also, the fan may operate at very low speed when adjusting room humidity.

The fan speed cannot be changed manually when Dry mode has been selected.

Fan: ● Use to circulate the air throughout your room.

During Heating mode:

Set the thermostat to a temperature setting that is higher than the current room temperature. The Heating mode will not operate if the thermostat is set lower than the actual room temperature.

During Cooling/Dry mode:

Set the thermostat to a temperature setting that is lower than the current room temperature. The Cooling and Dry modes will not operate if the thermostat is set higher than the actual room temperature (in Cooling mode, the fan alone will operate).

During Fan mode:

You can not use the unit to heat and cool your room.

En-6

TIMER OPERATION

Before using the timer function, be sure that the Remote Control Unit is set to the correct current time ( P. 4).

To Use the ON timer or OFF timer

1

Press the START/STOP button (Fig. 5 N)

(if the unit is already operating, proceed to step 2).

 

The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.

2

Press the TIMER MODE button (Fig. 5 K) to select the

OFF timer or ON timer operation.

 

Each time the button is pressed the timer function changes in the follow-

 

ing order:

 

 

 

 

 

 

 

sCANCEL

sOFF

sON

 

 

 

 

 

 

 

 

 

 

 

PROGRAM(OFF → ON, OFF ← ON) t

 

 

 

 

 

 

 

 

The indoor unit’s green TIMER Indicator Lamp (Fig. 3 6) will light.

3

Use the TIMER SET buttons (Fig. 5 K) to adjust the

desired OFF time or ON time.

Set the time while the time display is flashing (the flashing will continue for about five seconds).

button: Press to advance the time. button: Press to reverse the time.

To Cancel the Timer

Use the TIMER button to select “CANCEL”. The air conditioner will return to normal operation.

To Change the Timer Settings

Perform steps 2 and3.

To Stop Air Conditioner Operation while the Timer is Operating

Press the START/STOP button.

To Change Operating Conditions

If you wish to change operating conditions (Mode, Fan Speed, Thermostat Setting, SUPER QUIET mode), after making the timer setting wait until the entire display reappears, then press the appropriate buttons to change the operating condition desired.

About five seconds later, the entire display will reappear.

To Use the Program timer

1

Press the START/STOP button (Fig. 5 N).

(if the unit is already operating, proceed to step 2).

 

The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.

2

Set the desired times for OFF timer and ON timer.

See the section “To Use the ON timer or OFF timer” to set the desired

 

mode and times.

 

About three seconds later, the entire display will reappear.

 

The indoor unit’s TIMER Indicator Lamp (green) (Fig. 3 6) will light.

3

Press the TIMER MODE button (Fig. 5 K) to select the

PROGRAM timer operation (OFF

 

ON or OFF

 

ON

 

 

 

will display).

 

The display will alternately show “OFF timer” and “ON timer”, then change

 

to show the time setting for the operation to occur first.

 

The program timer will begin operation. (If the ON timer has been se-

 

lected to operate first, the unit will stop operating at this point.)

 

About five seconds later, the entire display will reappear.

About the Program timer

The program timer allows you to integrate OFF timer and ON timer operations in a single sequence. The sequence can involve one transition from OFF timer to ON timer, or from ON timer to OFF timer, within a twenty-fourhour period.

The first timer function to operate will be the one set nearest to the current time.

The order of operation is indicated by the arrow in the Remote Control Unit’s Display (OFF → ON, or OFF ← ON).

One example of Program timer use might be to have the air conditioner automatically stop (OFF timer) after you go to sleep, then start (ON timer) automatically in the morning before you arise.

To Cancel the Timer

Use the TIMER MODE button to select “CANCEL”.

The air conditioner will return to normal operation.

To Change the Timer Settings

1.Follow the instructions given in the section “To Use the ON Timer or OFF Timer” to select the timer setting you wish to change.

2.Press the TIMER MODE button to select either OFF ON or OFFON.

To Stop Air Conditioner Operation while the Timer is Operating

Press the START/STOP button.

To Change Operating Conditions

If you wish to change operating conditions (Mode, Fan Speed, Thermostat Setting, SUPER QUIET mode), after making the timer setting wait until the entire display reappears, then press the appropriate buttons to change the operating condition desired.

En-7