ZIRCON MT 6 User guide

The MT 6 metal locator finds both ferrous and nonferrous metal, and indicates depth up to 6 inches (152 mm) deep.

Key Features

• Locates metal up to 6 inches deep

• Finds all types of metal

• Identifies magnetic vs. nonmagnetic

• Indicates depth of metal found

• Large LCD screen

• Tough for jobsite use

MT 6

Electronic

Metal Locator

Applications

Find rebar, metal pipes, conduit, and plumbing before:

• Drilling into slabs for anchor bolts

• Coring through floors for wire bundles

• Cutting openings in concrete walls

• Drilling to add rebar to slab joints

• Estimating a demolition job – Find nails in used lumber before

sawing, planing, or sanding

The

ZIRCON

• Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble before drilling or coring.

• Indicates metal type—magnetic (such as rebar) or nonmagnetic (such as copper pipe).

• Shows the depth of metal from the surface in both inches and centimeters.

• Has on-screen graphics that are easy-to-read and interpret. Screen displays proximity, type of metal, and depth of metal.

• Made to withstand daily jobsite use.

Advantage

www.zircon.com

MT 6 Technical Information

Dimensions 8.87 in. L x 3.84 in.W x 2.23 in. D

(251 mm x 109 mm x 63 mm)

Weight 10.1 oz. (286 g) without battery

Battery type 9-V alkaline (not included)

Position accuracy Center of #4 (

at a minimum grid spacing of 6 in. (152 mm) typically within

⁄2in. (13 mm)

Depth Up to 6 in. ±1 in. (152 mm ±25 mm)

Operating temperature 20° to 120°F (-7° to 49°C)

Storage temperature -20° to 150°F (-29° to 66°C)

Humidity 80% RH (noncondensing)

Water resistance Splash and water resistant, not waterproof

⁄2in.) rebar or 1⁄2in. (13 mm) copper pipe

Order Information Part Number UPC MT 6 58594 0 42186 58594 0

1580 Dell Avenue Campbell, CA 95008-6992 Tel: 800-245-9265 or 408-866-8600 Fax: 408-866-9230

E-mail: info@zircon.com