CNPS7000 Series Clip Support for Socket 775 (Model : ZM-CS1)
Key Features
This Clip Support allows the installation of CNPS7000 series onto Socket 775
Specifications
1)Weight : 38g
2)Dimensions : 81(L) X 85(W) X 14.4(H)mm
3)Material : Anodized Aluminum, Brass
4)Compatible Products : CNPS7000-Cu / CNPS7000A-Cu / CNPS7000B-Cu
CNPS7000-AlCu / CNPS7000A-AlCu / CNPS7000B-AlCu
Cautions
1)Make sure the indent on the inner side of the Clip Support is positioned correctly.
2)The Washers must be in place when installing the Nipples.
3)Install CNPS7000(A/B) using the bolts included with this package.
Bolt
Clip Support
Nipple
Washer
CPU |
|
|
|
|
|
|
|
rd |
|
|
|
|
|
|
a |
|
|
|
|
|
|
|
o |
|
|
|
|
|
|
rb |
|
|
|
|
|
|
|
e |
|
|
|
|
|
|
th |
|
|
|
|
|
|
|
o |
|
|
|
|
|
|
M |
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
7 |
|
|
|
|
|
|
A |
|
|
|
|
|
|
|
G |
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
CPU
Washer
Bolt
The Clip Support should be positioned such that the socket lever can be fully pulled back into the indent on the inner side of the Clip Support.
Notice
Zalman Tech Co., Ltd. Is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
Loading...