English
Z7 Plus / Z7
Cautionary Notes
1
1) Please read this manual thoroughly prior to installation.
2) Before installation, check the components and condition of the
product. If any problem is found, contact the retailer.
3) Avoid inserting objects or hands into the system while it is in operation
to prevent product damage and injuries.
4) Check the manual when connecting cables. Incorrect connections
may cause short circuits leading to fi
5) Do not block the Front Intake Vent or the Rear Exhaust Vent.
6) Keep this unit away from heat sources, direct sunlight, water, oil, and
humid environments, and place the unit on a flat, stable, vibration-free,
and well-ventilated area.
7) Do not clean the product surface with chemicals or wet cloth.
(chemicals: industrial brightener, wax, benzene, alcohol, paint thinner,
mosquito repell
8) Please wear gloves while handling this product to prevent injuries.
9) Product design and specifications may be revised to improve quality
and performance.
ent, aromatics, lubricant, detergent etc.)
re hazards.
English
The diagrams used in this manual’s installation guide are based on
the model Z7 Plus. Installation for the Z7 follows exactly the same
installation procedure.
1
Z7 Plus / Z7
Product Details
2
(1) Specifications
Mo de ls Z7 P lu s / Z7
Enclosure Type ATX Mid Tower
Dimensions
(W×H×D)
Z7 Plus
Z7
Z7 Plus
Weight
Z7
Materials Plastic, Steel
Color Black
Compatible Motherboards Standard ATX / m-ATX
Compatible PSUs Standard ATX / ATX12V
VGA Compatibility Full Size(300㎜)
Expansion
Drive Bay
Cooling
Component
Slot 7
External 5.25” 4
Internal 3.5“ 5
External 3.5” 1
Front
Rear 120㎜ Fan × 1 (standard)
Z7 Plus
Side
Z7
224 × 472 × 496㎜ (8.8 × 18.6 × 19.5”)
207 × 472 × 496㎜ (8.1 × 18.6 × 19.5”)
Main Unit: 7.7㎏(17lb) / with packaging: 8.7㎏(19lb)
Main Unit: 7.2㎏(16lb) / with packaging: 8.2㎏(18lb)
120㎜ LED Fan × 1 (standard)
(120㎜ / 140㎜ option)
120㎜ Fan × 1(standard), Fan Control Function,
80/92/120/140㎜ Fan×1(optional)
80/92/120/140㎜ Fan×2(optional)
Front I/O Port
Z7 Plus
Mic×1, Headphones×1, USB 2.0×2, e-SATA×1
Z7
Mic×1, Headphones×1, USB 2.0×2
2
Z7 Plus / Z7
(2) External Features
Front Top Side(left)
(3) Top I/O Ports
Headphones
USB 2.0
Mic
e-SATA
English
Reset
Power
Button
HDD LED
Power LED
※ The Z7 does not have an e-SATA port.
3
Z7 Plus / Z7
(4) Exploded View
②
①
④
③
⑤
⑧
⑨
# Components Units
① Chassis 1
② Side Panel (Right) 1
③ Side Panel (Left) 1
④
⑤ HDD Rack 1
Side Panel Fan
Controller
⑥
# Components Units
⑥
⑦ Front Cover 1
⑧ 5.25” Bay Covers 8
⑨ 3.5” to 5.25” Bay Cover 1
1
⑦
3.5”/2.5” to 5.25”
Adaptor Tray
1
※ The Z7 does not have a ④Side Panel Fan Controller.
4
Z7 Plus / Z7
(5) Parts
Stand-Off × 9
English
Main Unit
A Bolts × 17
(6-32*6)
[motherboard/PSU/PCI Slot Installation]
B Bolts × 20
(6-32*8)
[HDD Installation]
Cable Ties × 5
C Bolts × 6
(PWH M3*5)
[ODD, FDD, SSD Installation]
User’s Manual ×1
5
Z7 Plus / Z7
Installation
3
(1) Side Panel Removal
(2) PSU Installation
A Bolt
6
Z7 Plus / Z7
(3) Motherboard Installation
Please refer to the diagrams below to determine Stand Off installation points
before installing the motherboard.
ATX Board
or
m-ATX Board
Stand-Off
English
A Bolt
7
Z7 Plus / Z7
(4) Graphics Card Installation
Tip
▶ The PCI Slot can also be secured with Bolts.
(5) 5.25” and 3.5” Drive Installation
1) Front Cover Removal
Click
PULL
8
Z7 Plus / Z7
2) ODD Installation
3) 3.5” Drive Installation
① HDD Rack Removal
English
② 3.5” HDD Installation
HDD
B Bolt
9
Z7 Plus / Z7
4) Adaptor Tray Installation
① Adaptor Tray Removal
② Installation of Drive to Adaptor Tray
A. For 3.5” FDD Installation
3.5” FDD
C Bolt
3.5” FDD
10
B. For 3.5” HDD Installation
3.5” HDD
A Bolt
3.5” HDD
C. For 2.5” SSD Installation
Z7 Plus / Z7
English
C Bolt
SSD
5) Front Cover Installation
Please remove the Front Cover’s Bay Cover before installing to the case.
SSD
11
Z7 Plus / Z7
(6) Cable Connections
1) Power Button and LED Cable Connection
Power Button
or
12
Power LED
Motherboard
2) Top I/O Panel Cable Connection
Top I/O Ports
Audio
HD Audio
※ e-SATA is only supported by Model Z7 Plus.
AC ’97
Motherboard
Power
USB 2.0
Reset
HDD LED
e-SATA
Z7 Plus / Z7
Tip
▶ For USB 2.0, e-SATA (Z7 Plus) and audio cables, please refer to the
motherboard’s manual.
▶ In the event that the Power LED/HDD LED connector’s polarities(+/-) are
reversed, the LED will not function properly.
(7)
Additional Fan Installation and Replacement (optional)
1) Side Panel Fan Installation (80/92/120/140㎜ Fans Compatible)
The Z7 Plus comes equipped with one 120㎜ Fan. For additional fan
installation, remove the Fan Cover(left) and install the fan(right) as shown
below.
English
13
Z7 Plus / Z7
2) HDD Rack Fan Replacement
The Z7 Plus comes equipped with one 120㎜ Fan. 120 / 140㎜ Fans can
be installed to the HDD Rack. Please refer to the diagram below for fan
replacement.
(8) Side Panel Fan Control [Z7 Plus]
The Z7 Plus comes equipped with a Fan Control on the left Side Panel. By
connecting the 4-Pin Power Connector and the 3-Pin Fan Connector to the Fan,
the Fan Speed can be controlled using the Fan Speed Controller.
14
Activity LED
High Speed
Fan Speed
Controller
Low Speed
Left Side
Panel (exterior) Left Side Panel (interior)
3-Pin Fan
Connector
4-Pin Power
Connector
Z7 Plus / Z7
MEMO
English
15
Loading...