Yaesu VX-7R reminder for recording a channel in memory, in English

YAESU VX-7R

 Entering a Frequency,
 Adding a PL Frequency,
 Adding it to the Memory list,
 Adding a Title to the Memorized

Channel

SET FREQUENCY

(See Page 14)

1. Select the VFO mode by pressing the
[V/M] key if necessary.
(See p. 5.).

2. Enter the frequency by pressing the number
keys for the chosen frequency. (See p. 16.).

ENTERING “CTCSS”
TONE (See Page 30)

3. Press the [MON F] key, then immediately
press the [8] tone key.

4. Press the [Main] or [Sub] button so that
"TONE" appears on the display. This activates
the CTCSS Encoder, which allows repeater
access.

5. When you have made your selection of the
CTCSS tone mode, Rotate the DIAL one
click clockwise to select Menu ("TONE
SET").

6. Press the [Band] key to enable the
adjustment of the CTCSS frequency.

Indicated by the flashing underscore on the
tone freq display.

7. Press the [Main] or [Sub] button until the
display indicates the Tone Frequency you
need.

8. Press the [Band] key to end the adjustment
of the CTCSS frequency and press the [PTT]
key to save the new settings and exit to
normal operation.

MEMORY STORAGE

(See Page 46)

8. While still in VFO mode, Press and hold in
the [Mon F] key for 1/2 second.
Within five seconds of releasing the key,
rotate the DIAL to select the desired
memory channel.

The microprocessor will automatically select
the next-available “free” channel (a memory
register on which no data has been stored).
If you see an Asterisk (*) by any channel
number, it means that the channel currently
has no data written on it (i.e. the channel is
“free”.)

9. Press the [Mon F] key again to enter the
frequency into memory.

MEMORY LABELS

(See Page 48)

10. Enter the memory mode by pressing the
[Mon F] key, then press the [0] key to enter
the Set mode.
Rotate the DIAL to select menu #11 ("NAME
SET").

11. Press the [BAND] key momentarily to
enable programming the name tag.

Press the [Main] / [Sub] key, or one of the
keyboard keys, to select the first digit of the
desired label.

Rotate the DIAL to move to the next
character position.
Repeat until up to eight characters chosen.

12. Then press the PTT key to save the label
and exit.