Yaesu SP980 User Manual

SP980

Cordless Stereo 863MHZ

Speaker System

User’s Manual

Please read before using the equipment

P.2

INTRODUCTION

This 863 MHz stereo wireless speaker system uses latest wireless

technology that enables you to enjoy music and TV sound anywhere inside

or outside your home. You can simply connect the system to any audio

source such as Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player.

Without complicated wiring and installation with your Audio/Video

equipments and rear channel amplifier, the system enables you to enjoy

thrilling, lifelike sound stereo in minutes.

FEATURES

1. Automatic Phases Lock Loop (PLL) scanning system on speaker

receivers

2. Phase Lock Loop (PLL) transmission system on transmitter

3. 863 MHz RF technology panel-like speaker system.

4. RF technology lets you roam freely throughout your house.

5. Operating distance up to 100 Meters

6. No line of sight limitation.

7. Virtually interference free stereo quality.

8. ALC and auto ON/OFF control.

9. Auto tuning function.

10. Bass boost function

11. Stereo (L and R) and Mono Selection

P.3

COMPONENT IDENTIFICATION

TRANSMITTER

SPEAKER RECEIVERS

Antenna

Signal (Green) Power (Red)

P.4

INSTALLATION

TRANSMITTER

1. Insert the antenna tube into the antenna wire.

2. Connect the supplied AC power adaptor to an electrical wall outlet.

3. Plug the AC power adaptor in the DC jack located on the rear of the

transmitter. The Power LED (Red) will on.

4. The rear of the transmitter has one audio cord that can be connected to

audio output jack of TV, Monitor, VCR, Radio recorder, CD / MP3 / VCD /

DVD players or to headphone / earphone jack with the connector

provided.

Plug the adaptor in the AC source and connect the audio plug to the audio

source. As soon as the transmitter is receiving the audio signal, it will

automatically switch on and the Signal LED (Green) will illuminate.