
SP-10/SP-20 External Speaker
Installation
Connect the supplied cable between the “EXT SPKR” jack on the transceiver and RCA jack
on the SP-10/SP-20.
Note: The figure above shows the
Supplied Cable
Adjusting the Front Stand/Legs
SP-10
Simply fold the stand forward to raise the
front of the SP-10, and fold it back against
the bottom case to lower the front of the
SP-10.
SP-20
Pull the front legs outward from the bottom panel, and then rotate the legs counter-clockwise to lock them in the extended
position.
Rotate the legs clockwise, and push them
inward. The front feet should now be locked
in the retracted position.
Specications
SP-10 SP-20
Frequency Range: 250 - 20000 Hz 200 - 18000 Hz
Speaker Diameter: 66 mm 100 mm
Maximum input: 3 watts 7 watts
Impedance: 8 ohms 8 ohms
Case Size (WxHxD): 4.33” x 3.15” x 9.96” 5.12” x 4.53” x 12.28”
(110 x 80 x 253 mm) (130 x 115 x 312 mm)
Weight (approx.): 2.2 lbs (1.0 kg) 3.75 lbs (1.7 kg)
YAESU MUSEN CO., LTD.

Unit 12, Sun Valley Business Park
Tennozu Parkside Building, 2-5-8 Higashi-Shinagawa,
Shinagawa-ku, Tokyo, 140-0002 Japan
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire UK SO23 0LB
Technical Construction file
Yaesu Musen Co. Ltd, Tokyo Japan
Signed for and on behalf of Yaesu UK Ltd
Tennozu Parkside Building, 2-5-8 Higashi-Shinagawa,
Shinagawa-ku, Tokyo, 140-0002 Japan
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire UK SO23 0LB
Technical Construction file
Yaesu Musen Co. Ltd, Tokyo Japan
Signed for and on behalf of Yaesu UK Ltd
Winnall Close
Winchester SO23 OLB
United Kingdom
Tel: +44 (0)1962 866667
Fax: +44 (0)1962 856801
Email: sales@yaesu.co.uk
Declaration of Conformity
We, Yaesu UK Ltd. certify and declare under our sole responsibility that the following
equipment complies with the essential requirements of the Directive 2011/65/EU.
Nr. YUK-DOC-1203-16
Unit 12, Sun Valley Business Park
Winnall Close
Winchester SO23 OLB
United Kingdom
Tel: +44 (0)1962 866667
Fax: +44 (0)1962 856801
Email: sales@yaesu.co.uk
Declaration of Conformity
We, Yaesu UK Ltd. certify and declare under our sole responsibility that the following
equipment complies with the essential requirements of the Directive 2011/65/EU.
Nr. YUK-DOC-1204-16
Applicable Standards:
This equipment is tested to and conforms to the essential requirem ents of directive, as included
in following standards:
ROHS2
2011/65/EU Art. 7 (b)
The technical docum entation as required by t he Conformity Assessment procedures is kept at
the following address:
Applicable Standards:
This equipment is tested to and conforms to the essential requirem ents of directive, as included
in following standards:
ROHS2
2011/65/EU Art. 7 (b)
The technical docum entation as required by t he Conformity Assessment procedures is kept at
the following address:
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Electronic and Electric Equipment should be recycled at a facility capable of handling these items
and their waste by products.
In EU countries, please contact your local equipment supplier representative or service center for
information about the waste collection system in your country.
Disposal of your Electronic and Electric Equipment