Whirlpool GBD279PVQ, GBD279PVB, GBS279PVQ, GBS279PVB, GBD309PVS Installation Instructions

INSTALLATION INSTRUCTIONS

27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC SINGLE

AND DOUBLE BUILT-IN OVEN

INSTRUCTIONS D’INSTALLATION

FOUR ÉLECTRIQUE ENCASTRÉ DE 27" (68,6 CM) ET 30"

(76,2 CM) - SIMPLE ET DOUBLE

Table of Contents/Table des matières

BUILT-IN OVEN SAFETY .........................................................................	2
INSTALLATION REQUIREMENTS ..........................................................	2
Tools and Parts......................................................................................	2
Location Requirements..........................................................................	2
Electrical Requirements.........................................................................	4
INSTALLATION INSTRUCTIONS ............................................................	5
Prepare Built-In Oven ............................................................................	5
Remove Oven Door ...............................................................................	5
Remove Oven Trim ................................................................................	5
Make Electrical Connection...................................................................	5
Install Oven ............................................................................................	7
Complete Installation .............................................................................	8

SÉCURITÉ DU FOUR ENCASTRÉ ...........................................................	9
EXIGENCES D'INSTALLATION................................................................	9
Outillage et pièces ..................................................................................	9
Exigences d'emplacement .....................................................................	9
Spécifications électriques.....................................................................	11
INSTRUCTIONS D'INSTALLATION .......................................................	12
Préparation du four encastré................................................................	12
Dépose de la porte du four...................................................................	12
Dépose des garnitures du four.............................................................	13
Raccordement électrique .....................................................................	13
Installation du four ................................................................................	14
Achever l'installation.............................................................................	15

IMPORTANT:

Save for local electrical inspector's use.

IMPORTANT :

À conserver pour consultation par l'inspecteur local des installations électriques.

W10192049A

BUILT-IN OVEN SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

WARNING

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■Phillips screwdriver

■Measuring tape

■Hand or electric drill (for wall cabinet installations)

■1" (25 mm) drill bit (for wall cabinet installations)

■Level

Parts needed

■UL listed or CSA approved conduit connector

■UL listed wire connectors

Parts supplied

■# 8–14 x 1" screws - single oven (2), double oven (4)

■Bottom vent (supplied on some models)

■Two # 8–18 x ³⁄" screws - bottom vent

■Side trim

Check local codes. Check existing electrical supply. See “Electrical Requirements.”

It is recommended that all electrical connections be made by a licensed, qualified electrical installer.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with oven.

■Recessed installation area must provide complete enclosure around the recessed portion of the oven.

■Grounded electrical supply is required. See “Electrical Requirements” section.

■Electrical supply junction box should be located 3" (7.6 cm) maximum below the support surface when the oven is installed in a wall cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the right rear or left rear corner of the support surface to pass the appliance cable through to the junction box.

NOTE: For undercounter installation, it is recommended that the junction box be located in the adjacent right or left cabinet. If you are installing the junction box on rear wall behind oven, the junction box must be recessed and located in the upper or lower right or left corner of the cabinet; otherwise, the oven will not fit into the cabinet opening.

■Oven support surface must be solid, level and flush with bottom of cabinet cutout. Floor must be able to support a single oven weight of 154 lbs (70 kg) or a double oven weight of 287 lbs (130 kg).

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194° (90°C)

Undercounter Installation (with cooktop installed above):

Ovens approved for this type of installation have an approval label located on the top of the oven. Refer to undercounter installation instructions for cutout dimensions and approved oven cooktop combinations (separate sheet).

2

Product Dimensions - Single Ovens

A

B

E

	D		C
27" (68.6 cm) models			30" (76.2 cm) models
A. 25 ⁄ " (64.3 cm) max. recessed			A. 28 ⁄ " (71.9 cm) max. recessed
width			width
B. 29" (73.7 cm) max. overall			B. 29" (73.7 cm) max. overall
height			height
C. 26³⁄ " (67.9 cm) overall width			C. 29³⁄ " (75.6 cm) overall width
D. 23" (58.4 cm) max. recessed			D. 23" (58.4 cm) max. recessed
depth			depth
E. 27¹⁄ " (69.9 cm) recessed			E. 27¹⁄ " (69.9 cm) recessed
height			height

Single Ovens Installed in Cabinet

A

	B
F	D
	E
	C

27" (68.6 cm) models

A.27" (68.6 cm) min. cabinet width

B.1" (2.5 cm) top of cutout to bottom of upper cabinet door

C.32" (81.3 cm) bottom of cutout to floor

D.25¹⁄ " (64.8 cm) cutout width

E.1¹⁄ " (3.8 cm) min. bottom of cutout to top of cabinet door

F. 27³⁄ " (70.5 cm) cutout height

30" (76.2 cm) models

A.30" (76.2 cm) min. cabinet width

B.1" (2.5 cm) top of cutout to bottom of upper cabinet door

C.32" (81.3 cm) bottom of cutout to floor

D.28¹⁄ " (72.4 cm) cutout width

E.1¹⁄ " (3.8 cm) min. bottom of cutout to top of cabinet door

F. 27³⁄ " (70.5 cm) cutout height

Cabinet Dimensions - Single Ovens

Single Oven Undercounter (without cooktop installed above)

A B

E

D

C

27" (68.6 cm) models

A.27" (68.6 cm) min. cabinet width

B.1¹⁄ " (3.8 cm) min. top of cutout to underside of countertop

C.5¹⁄ " (13.3 cm) bottom of cutout to floor

D.25¹⁄ " (64.8 cm) cutout width

E.27³⁄ " (70.5 cm) min. cutout height

30" (76.2 cm) models

A.30" (76.2 cm) min. cabinet width

B.1¹⁄ " (3.8 cm) min. top of cutout to underside of countertop

C.5¹⁄ " (13.3 cm) bottom of cutout to floor

D.28¹⁄ " (72.4 cm) cutout width

E.27³⁄ " (70.5 cm) min. cutout height

Product Dimensions - Double Ovens

A

B

E

			C
	D
27" (68.6 cm) models			30" (76.2 cm) models
A. 25 ⁄ " (64.3 cm) max.			A. 28 ⁄ " (71.9 cm) max. recessed
recessed width			width
B. 51" (129.5 cm) max. overall			B. 51" (129.5 cm) max. overall
height			height
C. 26³⁄ " (67.9 cm) overall width			C. 29³⁄ " (75.6 cm) overall width
D. 23" (58.4 cm) max. recessed			D. 23" (58.4 cm) max. recessed
depth			depth
E. 49 ⁄ " (125.9 cm) recessed			E. 49 ⁄ " (125.9 cm) recessed
height			height

3

Cabinet Dimensions - Double Ovens

Double Ovens Installed in Cabinet

	A
	B
F	D
	E
	C

27" (68.6 cm) models

A.27" (68.6 cm) min. cabinet width

B.1" (2.5 cm) top of cutout to bottom of upper cabinet door

C.14³⁄ " (37.5 cm) bottom of cutout to floor

D.25¹⁄ " (64.8 cm) cutout width

E.1¹⁄ " (3.8 cm) min. bottom of cutout to top of cabinet door

F.49³⁄ " (126.4 cm) min. cutout height

30" (76.2 cm) models

A.30" (76.2 cm) min. cabinet width

B.1" (2.5 cm) top of cutout to bottom of upper cabinet door

C.14³⁄ " (37.5 cm) bottom of cutout to floor

D.28¹⁄ " (72.4 cm) cutout width

E.1¹⁄ " (3.8 cm) min. bottom of cutout to top of cabinet door

F.49³⁄ " (126.4 cm) min. cutout height

Cabinet Side View - Single or Double Oven

	A
	B
E	C
	D

A.23¹⁄ " (59.1 cm) min. cutout depth

B.23" (58.4 cm) recessed oven depth

C.Oven front

D.Recessed oven

E.Cabinet

Electrical Requirements

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and the wire gauge are in accordance with local codes.

Check with a qualified electrical installer if you are not sure the oven is properly grounded.

This oven must be connected to a grounded metal, permanent wiring system.

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

Electrical Connection

To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

■Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial number rating plate is located at the bottom of the right-hand mounting rail. See the following illustrations.

A

A

Single Oven	Double Oven
A. Model/serial number plate	A. Model/serial number plate

4

■Models rated from 7.3 to 9.6 kW at 240 volts (5.5 to 7.2 kW at 208 volts) require a separate 40-amp circuit. Models rated at 7.2 kW and below at 240 volts (5.4 kW and below at

208 volts) require a separate 30-amp circuit.

■A circuit breaker is recommended.

■Connect directly to the circuit breaker box (or fused disconnect) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See “Make Electrical Connection” section.

■Flexible conduit from the oven should be connected directly to the junction box.

■Do not cut the conduit. The length of conduit provided is for serviceability of the oven.

■A UL listed or CSA approved conduit connector must be provided.

■If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

INSTALLATION INSTRUCTIONS

Prepare Built-In Oven

1.Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation.

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

2.To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting.

3.Remove the shipping materials and tape from the oven.

4.Remove the hardware package from inside the bag containing literature.

5.Remove and set aside racks and other parts from inside the oven.

6.Move oven and cardboard close to the oven’s final location.

3.Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door(s) aside on a covered work surface.

Remove Oven Trim

1.Side trims are located on the right side of the oven. Cut the cable tie and remove side trims.

2.Remove the cable tie from the side of the oven.

NOTE: Screws for attaching side trims (after oven is installed in cabinet) are in a screw bag inside the package containing literature.

Remove Oven Door

IMPORTANT: Use both hands to remove oven door(s).

1.Open the oven door.

2.Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position.

A

B

A. Oven door latch in locked	B. Oven door latch in unlocked
position	position

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together.

1.Disconnect power.

2.Feed the flexible conduit from the oven through the opening in the cabinet.

5