Whirlpool GC900QPL, TU800SPP, TU800SPK, TC800SPK, GX900QPP User Manual

®

Compactor

PRODUCT MODEL NUMBERS			OVERALL DIMENSIONS
GC900QPK	TC800SPK
GC900QPL	TU800SPK
GC900QPP	TU800SPP
GX900QPL
GX900QPP
Electrical: 115-volt, 60-Hz, AC-only, 15or
20-amp. grounded circuit is required. A time-delay
fuse or circuit breaker and separate circuit is				341⁄8"
recommended.				(86.7 cm)

			15"			24"
						(61 cm)
				(38.1 cm)
	CABINET OPENING DIMENSIONS			CLEARANCE DIMENSIONS

3"

A. Leave 6 in. (15.2 cm) of clearance

(7.6 cm)

space to the right side of the

A

compactor in order to remove the

compactor bags.

34

" min.

B. Leave 23 in. (58.4 cm) of clearance

(87 cm)

in front of the compactor in order to

fully open or remove the compactor

drawer.

18" min.

A. Grounded electrical outlet

(45.7 cm)

must be a minimum of 3 in.

(7.6 cm) away from

24" min.

(61 cm)

surrounding cabinets or

nearby walls as shown. It

B

can be placed either to the

left or the right side of the

A

15 " min.

product.

(38.7 cm)

CUSTOM PANELS

With Trim Kit

Without Trim Kit

Flat panel

Models with handles

Models without handles

Raised panel

14⁄"

1¹⁄"

⁄"

(

)

37.2 cm

(32 mm)

(5.6 mm)

23¹³⁄"

23¹³⁄"

25"

(60.5 cm)

A

23¹³⁄"

(60.5 cm)

(63.5 cm)

B

(60.5 cm)

14⁄"

15"

15"

(37.2 cm)

⁄"

(38.1 cm)

(38.1 cm)

⁄"

(8 mm)

both sides

(8 mm)

A 7/32 in. (5.6 mm) thick panel is required. This is the same thickness as a standard 1/4 in. plywood or paneling.

A.Raised panel or decorative trim

B.Outer section of panel

The outer section of panel must be 7/32 in. (5.6 mm) thick to fit into trim. Design raised panel sections using dimensions shown above.

Panel should be 1/2 to 5/8 in. (13 to 16 mm) thick. NOTE: A thicker panel may need rounded front corners and a cutout for access to the handle.

Panel should be 1/2 in. (13 mm) min. thickness

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 9871676 Rev. C
Instructions packed with product. Specifications subject to change without notice.	11-16-04