Your device allows you to roam throughout the world using both CDMA (Code Division Multiple Access)
and GSM (Global System for Mobile Communications) networks. For a complete list of countries and
features available, visit
To use Sprint international roaming services, you must be a current Sprint subscriber. You must
also meet international toll authorization and credit requirements to roam in most places outside
of the United States. Depending on your overseas location and coverage, you may not have
access to all features. Service may be interrupted if you change phones or phone numbers
before traveling abroad.
Sprint Worldwide Wireless Service1
Your SIM Card
Your device comes with a preinstalled SIM (Subscriber Identity Module) card to support
roaming on compatible GSM networks. The SIM card must be activated for international
wireless service prior to its initial use (outside of the United States).
To activate Sprint Worldwide service:
䊳 Visit www.sprint.com/international.
● Click Chat with us to talk online with a Sprint representative
– or –
● Click Email us to send an email to a Sprint representative
– or –
䊳 Call 1-888-226-7212, option 2, to speak to a Sprint representative.
For more help with Sprint Worldwide international setup, tap
the All Programs screen, and then tap
International Usage to display a brief set of onscreen
GSM setup instructions.
Your SIM card should be preinstalled. If you need to reinstall your SIM card, see “Removing Your
SIM Card” on page 3. The SIM card included with your device contains information specific to
your device and should be retained with the device for use on GSM networks.
Start > All Programs , scroll down
2Sprint Worldwide Wireless Service
Removing Your SIM Card
The SIM card comes preinstalled but can be removed if necessary.
1. Remove the back cover.
䡲 Remove the stylus. (You need to temporarily remove the stylus to be able to remove
the back cover.)
䡲 Hold the device with both hands and the front panel facing down.
䡲 Push the back cover up with your thumb until it disengages from the device
and then slide it up to remove.
Sprint Worldwide Wireless Service3
2. Remove the battery if it is installed. To remove, lift out the battery from the groove at the
upper right side of the battery compartment.
3. To remove the SIM card, first insert the tip of the
stylus into the small hole above the SIM card
slot, and then push the SIM card out with the
stylus. Slide the SIM card out from the slot with
your thumb or finger.
4. Press the
䡲 Your device will turn on, search for Sprint
Power button to turn the device on.
service, and then enter standby mode.
䡲 If your device is not yet activated, see the
“Activating Your Device” section of the HTC
Touch Pro2 User Guide for more information.
䡲 By default, your device is set to Global mode.
If there is no SIM card on your device, your
device will display a message to inform you
that it will switch to CDMA mode.
Your device’s battery should have enough charge to turn on, find a signal, set up your voicemail,
and make a call. You should fully charge your battery as soon as possible. See the “Charging the
Battery” section of the HTC Touch Pro2 User Guide for details.
Removing the SIM Card
4Sprint Worldwide Wireless Service
+ 18 hidden pages
You can only view or download manuals with
Sign Up and get 5 for free
Upload your files to the site. You get 1 for each file you add
Get 1 for every time someone downloads your manual
Buy as many as you need
View and download manuals available only for
Register and get 5 for free
Upload manuals that we do not have and get 1 for each file