Sunbeam SR5880, SR5990, SR5770, SR5665, SR5560 User Manual

0 (0)
Sunbeam SR5880, SR5990, SR5770, SR5665, SR5560 User Manual

Ultura Irons

Instruction Booklet

This book covers the use and care of the following Ultura Irons:

SR5990 Ultura 90 Resilium®

Shot & Spray Iron with Safety Auto-Off

SR5880 Ultura 80 Stainless

Shot & Spray Iron with Safety Auto-Off

SR5770 Ultura 70 Platinum

Shot & Spray Iron with Safety Auto-Off

SR5665 Ultura 65 Platinum

Shot & Spray Iron with Safety Auto-Off

SR5560 Ultura 60 Platinum

Shot & Spray Iron with Safety Auto-Off

Please read these instructions carefully and retain for future reference.

Contents

Sunbeam’s Safety Precautions

3

Features of your Ultura Iron

4

Using your Ultura Iron

6

The Safety Auto-Off Feature

7

Care and Cleaning of your Ultura Iron

8

Ultura Ironing Tips & Tricks

9

Ironing Chart

10

Important instructions – retain for future use.

Sunbeam’s Safety Precautions

 

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave the iron unattended while it is

• Do not leave a hot iron within reach of

 

plugged into the power outlet.

 

children. If they come into contact with a

• Always unplug the iron from the power outlet

 

hot iron it could lead to serious burns.

 

before filling or emptying the water tank.

• Iron only on an ironing board.

The iron must be used and rested on a stable

• An iron takes approximately 30 minutes to

 

surface.

 

cool down. Allow the iron to cool completely

The iron is not to be used if it has been

 

before storing.

 

 

dropped, if there are visible signs of

• Do not wind the cord around the soleplate

 

 

damage or if it is leaking.

 

while the iron is still hot.

 

 

 

 

 

 

 

 

 

Sunbeam is very safety conscious when

Do not use an appliance for any purpose

 

designing and manufacturing consumer

 

other than its intended use.

 

products, but it is essential that the product user

Do not place an appliance on or near a hot gas

 

also exercise care when using an electrical

 

flame, electric element or on a heated oven.

 

appliance. Listed below are precautions which

Do not place on top of any other appliance.

 

are essential for the safe use of an electrical

Do not let the power cord of an appliance hang

 

appliance:

 

over the edge of a table or bench top or touch

Read carefully and save all the instructions

 

any hot surface.

 

provided with an appliance.

Do not operate any electrical appliance with

Always turn the power off at the power outlet

 

a damaged cord or after the appliance has

 

before you insert or remove a plug. Remove

 

been damaged in any manner. If damage is

 

by grasping the plug - do not pull on the cord.

 

suspected, return the appliance to the nearest

Turn the power off and remove the plug

 

Sunbeam Appointed Service Centre

 

when the appliance is not in use and before

 

for examination, repair or adjustment.

 

cleaning.

For additional protection, Sunbeam

Do not use your appliance with an extension

 

recommend the use of a residual current

 

cord unless this cord has been checked

 

device (RCD) with a tripping current not

 

and tested by a qualified technician or

 

exceeding 30mA in the electrical circuit

 

service person.

 

supplying power to your appliances.

Always use your appliance from a power

Do not immerse the appliance in water

 

outlet of the voltage (A.C. only) marked

 

or any other liquid unless recommended.

 

on the appliance.

Appliances are not intended to be operated

This appliance is not intended for use by

 

by means of an external timer or separate

 

persons (including children) with reduced

 

remote control system.

 

physical, sensory or mental capabilities, or

This appliance is intended to be used in

 

lack of experience and knowledge, unless they

 

household and similar applications such

 

have been given supervision or instruction

 

as: staff kitchen areas in shops, offices and

 

concerning use of the appliance by a person

 

other working environments; farm houses; by

 

responsible for their safety.

 

clients in hotels, motels and other residential

Children should be supervised to ensure that

 

type environments; bed and breakfast type

 

they do not play with the appliance.

 

environments.

The temperature of accessible surfaces may be high when the appliance is operating.

Never leave an appliance unattended while in use.

If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

3

Features of your Sunbeam

Ultura Iron

Powerful shot of steam

Pressing the shot of steam button instantly produces a powerful shot of steam to remove stubborn wrinkles.

Vertical shot of steam

Pressing the shot of steam button with the iron in an upright position produces a vertical shot of steam, which is ideal for steaming curtains and suits, and removing creases from delicate fabrics.

Fine spray mist

Pressing the spray button provides a fine mist spray to dampen hard-to-iron fabrics.

Water inlet

The wide water inlet allows for easy filling and features a rubber seal to prevent spilling.

Extra large, easy-fill water tank

Holds up to 280mL of water for continual high steam performance, without having to refill the tank regularly.

Maximum water level indicator

Indicates the maximum water level when the iron is in the upright position.

Full length button groove

For ironing around buttons.

Resilium® non-scratch soleplate (SR5990)

 

Resilium® is a durable, scratch resistant surface that

 

provides a superior glide and prevents rucking. Exclusive

 

to Sunbeam, this premium soleplate features 98 steam

 

holes to maximise steam distribution.

2400W Fast heat up

Stainless steel soleplate (SR5880)

(SR5990, SR5880 & SR5770)

Provides faster initial heat up and rapid heat

Sleek and smooth, stainless steel is an excellent heat

recovery during ironing. The 2400 watt element

conductor and is extremely durable and hard wearing.

better maintains your selected temperature,

It features a quality polished finish that is easy to clean

and provides superior shot of steam output.

and care for.

 

Teflon® Platinum Pro non-stick soleplate

 

(SR5770, SR5665 & SR5560)

 

Teflon® Platinum Pro is DuPont’s premium non-stick

 

coating. It glides easily across all types of fabric and

 

prevents sticking. This hard wearing surface consists of a

 

unique three coat system for superior durability and scratch

 

resistance. It simply wipes clean for fuss free maintenance.

 

4

Loading...
+ 8 hidden pages