Technical Specification Technical Specifica tion Technica l Specificat ion
STEPHAN Microcut® MD 200
Description:
The STEPHAN Microcut® MD 200 is suitable for fine cutting as well as for emulsifying of food. It combines high productivity, fine and stable emulsions with easy operation in one compact unit.
The machine is suitable for many applications in the food industry, e.g. for meat, pâté and other emulsions. The products can be frozen, fresh or cooked.
The machine is characterised by high performance, low energy consumption and the reliable Stephan Rotor-Stator cutting system. High quality meat for sausages can be produced with a capacity up to 10 t/h. The design complies to the newest hygienic guidelines and safety regulations.
Advantages:
>Efficient fine grinding
>High throughput up to 10 t/h
>Stable emulsions
>Continuous working
>Constant product quality
>Easy to clean
Cutting Ring
Cutting Rotor I
Cutting Ring
Cutting Head II
Sales and Advice:
Phone:
+49 (5151) 583-216
Fax:
+49 (5151) 583-642
Email:
microcut@stephan-machinery.com
Working Tools:
For the STEPHAN Microcut® MD 200 cutting rings with cutting gaps as follows are available. The cutting gap corresponds to the average particle size (depending on the product).
Use closed cutting rings for product with fibres or sinews! Cutting gaps in mm
Description |
Cutting gap in mm |
Article number |
Cutting Ring open |
0.20 |
3D0220-72 |
Cutting Ring open |
0.35 |
3D0220-73 |
Cutting Ring open |
0.50 |
3D0220-74 |
Cutting Ring open |
0.70 |
3D0220-75 |
Cutting Ring open |
0.90 |
3D0220-76 |
Cutting Ring open |
1.30 |
3D0220-77 |
Cutting Ring open |
2.70 |
3D0220-81 |
Cutting Ring open |
3.00 |
3D0220-82 |
Cutting Ring open |
6.00 |
3D0220-83 |
Cutting Ring closed |
0.20 |
3D0220-72 |
Cutting Ring closed |
0.35 |
3D0220-73 |
Cutting Ring closed |
0.50 |
3D0220-74 |
Cutting Ring closed |
0.70 |
3D0220-75 |
Description |
Teeth |
Article number |
Cutting Rotor I |
27 |
3D0405-20 |
Cutting Rotor II |
27 |
3D0405-30 |
|
|
|
Accessoires / Options: |
|
|
|
|
|
- Funnel 300 l with hinge in connection with fast |
|
|
feeding spiral at the main motor shaft: |
MD200-Axxxx |
|
- Discharge tube 1500 mm to left or right side: |
MD200-xAxxx |
Stephan Machinery GmbH
Stephanplatz 2
31789 Hameln / GERMANY
Phone: +49(5151)583-0 - Fax:+49(5151)583-189 Email:info@stephan-machinery.com www.stephan-machinery.com