Sony MHC-V21D User Manual

Home Audio System

Operating Instructions

Getting Started

Disc/USB Playback

USB Transfer

Tuner

BLUETOOTH Connection

Sound Adjustment

Other Operations

Additional Information

MHC-V21D

WARNING

To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.

As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.

Indoor use only.

For product with CE marking

The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).

CAUTION

Risk of explosion if the battery is replaced by an incorrect type.

Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.

CAUTION

The use of optical instruments with this product will increase eye hazard.

For customers in Europe

This appliance is classified as a CLASS1 LASER product under IEC 60825-1:2007. This marking is located on the rear exterior.

Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other countries with separate collection systems)

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be

treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbol for lead (Pb) is added if the battery contains more than 0.004% lead. By ensuring that these products and batteries are disposed of correctly, you will help to prevent potentially negative consequences for the environment and human health which could be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the appropriate collection point for the recycling of electrical and electronic

equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the appropriate collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives.

This product has been manufactured by or on behalf of Sony Corporation. EU Importer: Sony Europe Limited. Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer’s authorized representative, Sony Belgium, bijkantoor van Sony Europe Limited, Da Vincilaan 7-D1, 1935 Zaventem, Belgium.

Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.de/

You can check the software version by pressing OPTIONS, then select “SYSTEM” – “VERSION” using

This equipment has been tested and found to comply with the limits set out in the EMC regulation using a connection cable shorter than 3meters.

This Home Audio System is designed to be used for the following purposes:

• Playing back music/video sources on discs or USB devices

• Transferring music to USB devices

• Listening to radio stations

• Listening to TV sound

• Playing back music sources on BLUETOOTH devices

• Enjoying social gatherings with the Wired Party Chain and Wireless Party Chain functions

/ and

For customers in Australia and India

Disposal of old electrical & electronic equipment (applicable in the European Union and other countries with separate collection systems)

This radio equipment is intended to be used with the approved version(s) of software that are indicated in the EU Declaration of Conformity. The software loaded on this radio equipment is verified to comply with the essential requirements of the Directive 2014/53/EU.

For customers in the United Arab Emirates

This appliance is classified as a CLASS1 LASER product under IEC 60825-1:2007. This marking is located on the rear exterior.

License and Trademark Notice

• is a trademark of DVD Format/ Logo Licensing Corporation.

• “DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”, “DVD VIDEO”, and the “CD” logos are trademarks.

• WALKMAN® and WALKMAN® logo are registered trademarks of Sony Corporation.

• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

• Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

• This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

• This system incorporates Dolby* Digital.

* Manufactured under license from

Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

• This system incorporates High- Definition Multimedia Interface (HDMI™) technology. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

• “BRAVIA” is a trademark of Sony Corporation.

• LDAC™ and LDAC logo are trademarks of Sony Corporation.

• The BLUETOOTH® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

• Android is a trademark of Google LLC.

• Google Play and the Google Play logo are trademarks of Google LLC.

• Apple, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

• Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

• THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR

(i) ENCODING VIDEO IN

COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”)

AND/OR

(ii) DECODING MPEG-4 VIDEO THAT

WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE MPEG-4 VIDEO.

NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, L.L.C. HTTP://WWW.MPEGLA.COM

• All other trademarks are trademarks of their respective owners.

• In this manual, ™ and ® marks are not specified.

About this manual

••

This manual mainly explains operations using the remote control, but the same operations can also be performed using the buttons on the unit having the same or similar names.

••

Icons, such as , listed at the top of each explanation indicate the type of media that can be used with the function being explained.

••

Some illustrations are presented as conceptual drawings, and may be different from the actual products.

••

The items displayed on the TV screen may vary depending on the area.

••

The default setting is underlined.

••

The text enclosed in bracket ([--]) appears on the TV screen, and the text enclosed in double quotation mark (“--”) appears on the display.

Table of Contents

About this manual ................. 5

Unpacking .............................. 8

Playable discs or files on

discs/USB device ...................8

Websites for compatible

devices .................................. 11

Guide to parts and

controls .................................12

Getting Started

Hooking up the system

securely .................................17

Deactivating the

demonstration ......................18

Inserting batteries ................18

Connecting the TV ................19

Changing the color system ...21 Performing the quick

setup .....................................21

Changing the display

mode .................................... 22

Disc/USB Playback

Before using the USB

device ................................... 22

Basic playback ..................... 22

Other playback

operations ............................ 23

Using play mode .................. 26

Restricting playback of the

disc (Parental Control) .......... 27

Viewing information of a

disc and USB device ............. 28

Using the Setup Menu ......... 29

USB Transfer

Before using the USB

device ................................... 33

Transferring music ............... 33

Tuner

Listening to the radio ........... 36

BLUETOOTH Connection

About the BLUETOOTH

wireless technology ............. 37

Pairing this system with a

BLUETOOTH device .............. 38

Listening to music on a

BLUETOOTH device .............. 39

Connecting this system with multiple BLUETOOTH devices (Multi-device

connection) ..........................40

One Touch BLUETOOTH

Connection by NFC ..............40

Setting the BLUETOOTH

audio codecs .........................41

Setting the BLUETOOTH

standby mode ...................... 42

Turning on or off the

BLUETOOTH signal ............... 42

Controlling the system using a smartphone or tablet

(Sony | Music Center) ........... 43

Getting frenzied parties with

the “Fiestable” app ...............44

Achieving and sharing a Party People ranking and getting bonus features with

Party King .............................44

Sound Adjustment

Adjusting the sound ............ 45

Selecting the Virtual

Football mode ...................... 45

Creating your own sound

effect .................................... 45

Creating a party atmosphere

(DJ Effect) .............................46

Other Operations

Using the Control for HDMI

function ................................ 47

Enjoying wired playback using multiple systems (Wired Party Chain

function) ..............................49

Enjoying wireless playback using multiple systems (Wireless Party Chain

function) .............................. 52

Listening to music wirelessly with two systems (Speaker

Add function) ....................... 54

Singing along: Karaoke ........ 56

Enjoying sound from a

guitar .................................... 57

Enjoying music with the

Speaker Light ....................... 57

Using the Sleep Timer .......... 58

Using the Voice Guidance .... 58

Using optional equipment ...58 Deactivating the buttons on

the unit (Child Lock) ............. 59

Setting the automatic

standby function.................. 59

Updating the software .........60

Additional Information

Troubleshooting ..................60

Precautions .......................... 70

Specifications ....................... 72

Language code list .............. 75

Unpacking

••

This unit (MHC-V21D) (1)

••

Remote control (1)

••

R03 (size AAA) batteries (2)

••

FM lead antenna (1)

••

AC power cord (mains lead) (1)

••

AC plug adaptor* (1) (supplied only for certain areas)

* This plug adaptor is not for the use in

Chile, Paraguay and Uruguay. Use this plug adaptor in the countries where it is necessary.

Playable discs or files on discs/USB device

Playable discs

••

DVD VIDEO

••

DVD-R/DVD-RW in DVD VIDEO format or video mode

••

DVD+R/DVD+RW in DVD VIDEO format

••

VIDEO CD (Ver. 1.0, 1.1, and 2.0 discs)

••

Super VCD

••

CD-R/CD-RW/CD-ROM in VIDEO CD format or super VCD format

••

AUDIO CD

••

CD-R/CD-RW in AUDIO CD format

Playable files on discs

••

Music: MP3 files (.mp3)

••

Video: MPEG4 files (.mp4/.m4v) files (.avi)

1)2)

2)3)

, Xvid

Playable files on USB device

••

Music: MP3 files (.mp3)

(.wma)

.3gp)

, WAV files (.wav)

••

Video: MPEG4 files (.mp4/.m4v)

1)2)

, AAC files (.m4a/.mp4/

, WMA files

2)3)

, Xvid

files (.avi)

Note

••

The discs must be in the following format:

— CD-ROM/-R/-RW in DATA CD format

that contains the MP3 and Xvid files, and conforms to

ISO 9660 (extended format).

— DVD-ROM/-R/-RW/+R/+RW in

DATA DVD format that contains the MP3 conforms to UDF (Universal Disk Format).

••

The system will attempt to play back any data with the extensions above, even if it is not in the supported format. Playing this data may generate a loud noise which could damage your speaker system.

MP3 (MPEG 1 Audio Layer 3) is a

standard format defined by ISO/MPEG for compressed audio data. MP3 files must be in MPEG 1 Audio Layer 3 format.

Files with copyright protection (Digital

Rights Management) cannot be played back by the system.

MPEG4 files must be recorded in MP4

file format. Supported video codec and audio codec are as follows:

— Video codec: MPEG4 Simple Profile

(AVC is not supported.)

— Audio codec: AAC-LC (HE-AAC is not

supported.)

A logical format of files and folders on

CD-ROMs, defined by ISO (International Organization for Standardization).

Level 1/Level 2 or Joliet

1)2)

, MPEG4

1)2)

, MPEG4

2)3)

and Xvid files, and

2)3)

Discs/files that cannot be played back

••

You cannot play back the following discs

•—

BDs (Blu-ray Discs)

•—

CD-ROMs recorded in PHOTO CD format

•—

Data part of CD-Extra or Mixed Mode CDs*

•—

CD Graphics disc

•—

Super Audio CDs

•—

DVD Audio

•—

DATA CD/DATA DVD that is created in Packet Write format

•—

DVD-RAM

•—

DATA CD/DATA DVD which has not been correctly finalized

•—

CPRM (Content Protection for Recordable Media) compatible DVD-R/-RW recorded in CopyOnce programs

•—

A disc that has a non-standard shape (e.g., heart, square, star)

•—

A disc that has adhesive tape, paper, or a sticker attached to it

••

You cannot play back the following files

•—

The video files which is larger than 720 (width) × 576 (height) pixels.

•—

The video files with a high width to length ratio.

•—

A WMA file in WMA DRM, WMA Lossless, or WMA PRO format.

•—

An AAC file in AAC DRM or AAC Lossless format.

•—

The AAC files which is encoded at 96 kHz.

•—

Files that are encrypted or protected by passwords.

•—

Files with DRM (Digital Rights Management) copyright protection.

•—

Some Xvid files that are longer than 2 hours.

••

The MP3 PRO audio file can be played back as MP3 file.

••

The system may not play back an Xvid file when the file has been combined from two or more Xvid files.

* Mixed Mode CD: This format records

data on the first track and audio (AUDIO CD data) on the second and subsequent tracks of a session.

Notes on CD-R/-RW and DVD-R/-RW/+R/+RW

••

In some cases, a CD-R/-RW and DVD-R/-RW/+R/+RW cannot be played back on this system due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. For more information, refer to the operating instructions of the recording device.

••

Some playback functions may not work with some DVD+Rs/+RWs, even if they have been correctly finalized. In this case, view the disc by normal playback.

Notes on discs

••

This product is designed to play back discs that conform to the Compact Disc (CD) standard.

••

DualDisc and some music discs encoded with copyright protection technologies do not conform to the CD standard. Therefore, these discs may not be compatible with this product.

Note on multisession disc

This system can play back continuous sessions on a disc when they are recorded in the same format as the first session. However, the playback is not guaranteed.

Note on DVD VIDEO and VIDEO CD playback operations

Some playback operations for a DVD VIDEO or VIDEO CD may be intentionally restricted by software producers. Therefore, some playback features may not be available. Be sure to read the operating instructions of the DVD VIDEO or VIDEO CD.

Notes on playable files

••

Playback may take a longer time to start when:

•—

a DATA CD/DATA DVD/USB device is recorded with a complicated tree structure.

•—

the audio files or video files in another folder have just been played back.

••

The system can play back a DATA CD/DATA DVD or a USB device in the following conditions:

•—

up to a depth of 8 folders

•—

up to 300 folders

•—

up to 999 files in a disc

•—

up to 2,000 files in a USB device

•—

up to 650 files in a folder These numbers may vary depending on the file or folder configuration.

••

Folders that have no audio files or video files are skipped.

••

Files transferred by a device such as a computer may not be played back in the order in which they were transferred.

••

The playback order may not be applicable depending on the software used for creating the audio file or video file.

••

Compatibility with all encoding/ writing software of the supported formats, recording devices, and recording media cannot be guaranteed.

••

Depending on the Xvid file, the picture may be unclear or the sound may skip.

Notes about USB devices

••

This system is not guaranteed to operate with all USB devices.

••

Although there are a variety of complex functions for USB devices, the playable contents of USB devices connected to the system are music and video contents only. For details, refer to the operating instructions of the USB device.

••

When a USB device is inserted, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device.

••

Do not connect the system and the USB device through a USB hub.

••

With some connected USB devices, there may be a delay before an operation is performed by this system.

••

The playback order for the system may differ from the playback order of the connected USB device.

••

Before using a USB device, make sure that no virus-ridden files are on the USB device.

Websites for compatible devices

Check the websites below for the latest information about compatible USB and BLUETOOTH devices.

For customers in Latin America:

<http://esupport.sony.com/LA>

For customers in Europe and Russia:

<http://www.sony.eu/support>

For customers in other countries/ regions:

<http://www.sony-asia.com/ support>

Compatible iPhone/iPod models

The compatible iPhone/iPod models are as follows. Update your iPhone/ iPod with the latest software before using with the system. Made for

••

iPhone X

••

iPhone 8

••

iPhone 8 Plus

••

iPhone 7

••

iPhone 7 Plus

••

iPhone SE

••

iPhone 6s

••

iPhone 6s Plus

••

iPhone 6

••

iPhone 6 Plus

••

iPhone 5s

••

iPhone 5c

••

iPhone 5

••

iPhone 4s

••

iPod touch (6th generation)

••

iPod touch (5th generation)

Guide to parts and controls

You can lock the buttons except  (power) on the unit to prevent them from being operated by mistake (page 59).

Unit

Top

Front

* The  button has a tactile dot. Use the tactile dot as a reference when operating the

system.

  (power)

Turns on the system, or sets it to standby mode.

  (play)

— Starts playback. — Hold down  for more than

2 seconds, the built-in sound demonstration will be played back. Press  to stop the demonstration.

• (stop)

— Stops playback. When pressed

twice, resume playback can be canceled.

— Stops transfer during music

transfer.

— Stops the built-in sound

demonstration.

 BLUETOOTH indicator

(page37)

BLUETOOTH (page39, 40)

PAIRING

Hold down to activate BLUETOOTH pairing during the BLUETOOTH function.

FUNCTION

Selects a function.

 SPEAKER LIGHT (page 22,

57)

MEGA BASS indicator

Lights up when MEGA BASS sound effect is selected.

PARTY CHAIN (page 51)

 VOLUME/DJ CONTROL knob

Adjusts the volume.* Adjusts the FLANGER and ISOLATOR effect or outputs the SAMPLER sound effect continuously (page 46).

* You cannot use this knob to adjust

the volume when DJ Effect is selected.

 Display

 MIC1 jack

Use to connect the microphone.

MIC2/GUITAR jack

Use to connect the microphone or guitar.

(USB) REC/PLAY port

Use to connect a USB device. This port can be used for both playback and music transfer.

 MIC ECHO (page 56)

GUITAR (page 57)

MIC/GUITAR LEVEL +/– (page56, 57)

VOICE CHANGER (page 57)

VOCAL FADER (page 56)

W.PARTY CHAIN (Wireless Party Chain) (page 53)

MEGA BASS (page 45)





(N-Mark) (page 41)

+/– (select folder)

Selects a folder on a data disc or a USB device.

S1, S2 (page 46)

 FLANGER (page 46)

ISOLATOR (page 46)

SAMPLER (page 46)

DJ OFF (page 46)

  (open/close)

Opens or closes the disc tray.

 / (go backward/go

forward) (page 23)

TUNING +/– (page 36)

S3, S4 (page 46)

 Remote control sensor

(page 18)

 Disc tray

Remote control

  (power)

Turns on the system, or sets it to standby mode.

 PLAY MODE (page 26,

34)

 REPEAT/FM MODE (page

27, 36)

 Numeric (0 – 9) buttons

— Selects a track, chapter or file

with its item number.

— Enters numbers or values.

1)2)

MEGA BASS (page 45)

REC TO USB (page 34)

Transfers music to the USB device connected to the port.

MEDIA MODE (page 23)

Selects the media to be played back on a data disc or USB device.

SUBTITLE (page 25)

AUDIO

(page 25, 29)

ANGLE (page 25)

SCORE (page 57)

VOICE CHANGER (page 57)

MIC LEVEL+/– (page 56)

VOCAL FADER (page56)

MIC ECHO (page 56)

+/– (select folder)

Selects a folder on a data disc or a USB device.

KEY CONTROL / (page56)

 DVD TOP MENU

Displays the DVD title on the TV screen.

DVD/TUNER MENU (page 23, 24, 37)

CLEAR

(page 24)

RETURN (page 23)

SETUP

(page 29)

OPTIONS

Enters or exits options menu.

 (USB)

/ / /

Selects the menu items.

(enter)

Enters/Confirms the settings.

 SEARCH (page 23, 24)

  (volume) +/–

Adjusts the volume.

 / (fast reverse/fast

forward) (page 24)

/ (slow back/slow

forward) (page 24)

TUNING+/– (page 36)

 (play)

Starts playback.

/ (go backward/go forward) (page 23)

PRESET+/– (page 37)

 (pause)

Pauses playback. To resume playback, press .

 (stop)

— Stops playback. When pressed

twice, resume playback can be canceled.

— Stops transfer during music

transfer.

— Stops the built-in sound

demonstration.

 SHIFT

Hold down to activate the buttons printed in pink.

 SOUND FIELD +/– (page 45)

 FUNCTION

Selects a function.

 PARTY LIGHT (page 22,

57)

LIGHT MODE (page 58)

 DISPLAY (page 18, 22,

29, 36, 38)

Changes the information on the

display.

DISPLAY1) (page 28)

Views or hides the on-screen

display.

 SLEEP (page 58)

This button is printed in pink. To use this

button, hold down SHIFT () and press this button.

The numeric button 5/AUDIO,  +

and  buttons have a tactile dot. Use the tactile dot as a reference when operating the system.

Getting Started

Hooking up the system securely

Unit (Rear)

Getting Started

 FM ANTENNA terminal

Find a location and an orientation that provide good reception when you set up the antenna. Keep the antenna away from the AC power cord (mains lead) and the USB cable to avoid picking up noise.

Extend the FM lead antenna horizontally

 Audio input and output jacks

Use an audio cable (not supplied) to make either connection as follows:

••

AUDIO/PARTY CHAIN IN (TV) L/R jacks

•—

Connect to the audio output jacks of a TV or an audio/ video equipment. The sound is output through this system.

•—

Connect to another audio system to enjoy the Wired Party Chain function (page49).

••

AUDIO/PARTY CHAIN OUT L/R jacks

•—

Connect to the audio input jacks of an optional equipment.

•—

Connect to another audio system to enjoy the Wired Party Chain function (page49).

 VIDEO OUT jack

Use a video cable (not supplied) to connect to the video input jack of a TV or projector (page 19).

Note

Do not connect this system to the TV through the video deck.

 HDMI OUT (TV) ARC jack

Use an HDMI cable (not supplied) to connect to the HDMI input jack of a TV (page 19).

 AC power cord (mains lead)

Connect the AC power cord (mains lead) (supplied) to the unit, then to the wall outlet.

Deactivating the demonstration

To deactivate the demonstration while the system is turned off, press DISPLAY repeatedly to select the no display mode (Power Saving Mode) (page 22).

Inserting batteries

Insert the two supplied R03 (size AAA) batteries, matching the polarities shown below.

Note

••

Do not mix an old battery with a new one or mix different types of batteries.

••

If you do not use the remote control for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion.

The demonstration (page 22) starts automatically. If you press  (power) to turn on the system, the demonstration ends.

To wall outlet

To operate the system using the remote control

Point the remote control at the unit’s remote control sensor.

Connecting the TV

Before connecting cables, be sure to disconnect the AC power cord (mains lead).

To watch video

Select the connection methods according to the jacks on your TV.



Video cable (not supplied)



High Speed HDMI Cable

with Ethernet (not supplied)

* You can listen to TV sound via the system if you connect the system to the TV’s HDMI IN

(ARC) jack. The Audio Return Channel (ARC) function enables the TV to output sound through the system with an HDMI connection, without performing an audio connection (connection ) (page 20). To set the ARC function on this system, see [AUDIO RETURN CHANNEL] (page 32). To check the compatibility of your TV’s ARC function, refer to the operating instructions supplied with your TV.

VIDEO IN

HDMI IN (ARC)*

HDMI IN

Getting Started

To listen to TV sound via the system

Choose one of the connections below ( or ).



Audio cable (not supplied)

AUDIO OUT

HDMI IN (ARC)



High Speed HDMI Cable with

Ethernet (not supplied)

To listen to TV sound, press FUNCTION repeatedly to select “TV”.

Hint

••

You can also enjoy the sound of external equipment (DVD players, etc.) via the system by connecting to the AUDIO/PARTY CHAIN IN (TV) L/R jacks as connection  above. For details, refer to the operating instructions of your equipment.

••

If the audio output level from the system is low when connecting the external equipment, try adjusting the audio output settings on the connected equipment. It may improve the audio output level. For details, refer to the operating instructions of your equipment.

If “CODE 01” and “SGNL ERR” appear on the display of the unit

When the audio input signals to the system are other than 2-channel Linear PCM signals, the messages “CODE 01” and “SGNL ERR” (indicate that the input audio signals are unsupported) appear on the display of the unit. In this case, select the proper audio output mode on the TV in order to output 2-channel Linear PCM audio signals. For details, refer to the operating instructions of your TV.

Changing the color system

(Except for Latin American, European, and Russian models)

Set the color system to PAL or NTSC depending on the color system of your TV. Each time you perform the procedure below, the color system changes as follows: NTSC  PAL

Use the buttons on the unit to perform this operation.

1 Press  to turn on the system. 2 Press FUNCTION repeatedly to

select “DVD/CD”.

3 Hold down MIC ECHO and MEGA

BASS for more than 3seconds.

“NTSC” or “PAL” appears on the display.

4 Press without loading a disc.

[LANGUAGE SETUP] appears on the TV screen. Displayed items may vary depending on country or region.

LANGUAGE SETUP

OSD

AUDIO

SUBTITLE

ENGLISH

CHINESE 2

THAI

1CHINESE

5 Press / repeatedly to select a

language, then press .

[VIDEO SETUP] appears on the TV screen.

6 Press / repeatedly to select

the setting that matches your TV type, then press .

After [QUICK SETUP is complete.] appears on the TV screen, the system is ready for playback.

To change the setting manually

See “Using the Setup Menu” (page 29).

Getting Started

Performing the quick setup

Before using the system, you can make the minimum basic adjustments in the quick setup.

1 Turn on your TV and select the

input according to the connection.

2 Press  to turn on the system. 3 Press FUNCTION repeatedly to

select “DVD/CD”.

The guide message [Press ENTER to run QUICK SETUP.] appears at the bottom of the TV screen.

To quit the quick setup

Hold down SHIFT and press SETUP.

Note

The guide message appears when you turn on the system for the first time or after performing [RESET] (see “Returning the setup menu settings to the default” on page 68).

Changing the display mode

Press DISPLAY repeatedly while the system is turned off.

Each time you press the button, the display mode changes as follows.

Demonstration

The messages about the main features of this system scrolls across the display and the illumination turns on. To turn off the illumination, press PARTY LIGHT (or SPEAKER LIGHT on the unit).

No display (Power Saving Mode)

The display and the illumination are turned off to conserve power.

Disc/USB Playback

Before using the USB device

For compatible USB devices, see “Websites for compatible devices” (page 11). (You can use your iPhone/iPod with this system via BLUETOOTH connection only.)

Basic playback

1 Press FUNCTION repeatedly to

select “DVD/CD” or “USB”.

2 Prepare the playback source.

For DVD/CD function:

Press  on the unit to open the disc tray and load a disc with the label facing up on the disc tray.

When you play back an 8 cm disc such as a CD single, place it on the inner circle of the tray.

Press  on the unit again to close the disc tray.

Do not forcibly push the disc tray to close it as this may cause a malfunction.

For USB function:

Connect a USB device to the port.

Note

You can use a USB adaptor (not supplied) to connect the USB device to the unit if the USB device cannot be plugged into the

(USB) port.

(USB)

2 Press SEARCH to display the

folder list.

3 ( only)

Press MEDIA MODE repeatedly to select the media type ([MUSIC]/[VIDEO]) you want.

4 Press  to start playback.

Other operations

To Do this

Stop playback Press . Pause

playback Resume

playback or return to normal playback

Cancel the resume point

Select a track, file, chapter or scene

To play from a specific file

1 Press MEDIA MODE repeatedly to

select [MUSIC] or [VIDEO].

Press .

Press .

Press  twice.

Press  or  during playback.

Or, hold down SHIFT and press the numeric buttons, then

press (Operation might be prohibited by disc or USB device.)

3 Press / repeatedly to select

the folder you want.

4 Press to display the file list.

5 Press / repeatedly to select

the file you want, then press .

Other playback operations

Depending on the type of disc or file, the function may not work.

To Do this

View DVD menu

View folder list or file list

Return to folder list when in file list

Press DVD/TUNER MENU.

Press SEARCH. Press SEARCH again to

turn off the folder list or file list.

Press RETURN.

Disc/USB Playback

To Do this

Locate a point quickly in fast forward or fast reverse (Lock Search)

Watch frame by frame (Slow-motion Play)

Press  or  during playback.

Each time you press  or , the playback speed changes.

Press , then press or .

Each time you press or , the playback speed changes.

2 Hold down SHIFT and press the

numeric buttons to enter the title, chapter, scene, track, or index number you want, then press .

Playback starts.

Note

••

For VIDEO CD with PBC playback, press SEARCH to search the scene.

••

For VIDEO CD without PBC playback, press SEARCH to search the track and index.

Searching a specific track

Hold down SHIFT and press the numeric buttons to select the track you want to play back, then press

To search using the SEARCH button

1 Press SEARCH to display the track

list.

2 Press / repeatedly to select

the track you want to play back, then press .

Searching a specific title/ chapter/scene/track/index

1 Press SEARCH repeatedly during

playback to select the search mode.

To search for a particular point using the time code

1 Press SEARCH repeatedly during

playback to select the time search mode.

2 Hold down SHIFT and press the

numeric buttons to enter the time code, then press .

Example: To find a scene at 2 hours, 10 minutes, and 20 seconds, hold down SHIFT and press 2, 1, 0, 2, 0 ([2:10:20]).

If you make a mistake, hold down SHIFT and press CLEAR to cancel the number.

To search using the DVD menu

1 Press DVD/TUNER MENU. 2 Press / / / , or hold down

SHIFT and press the numeric buttons, to select the title or item you want to play back, then press .

+ 56 hidden pages