Mini Hi-Fi
Component
System
4-238-409-63 (1)
Operating Instructions
Manual de Instrucciones
MHC-RG77
MHC-RG66T
GB
ES
© 2002 Sony Corporation
MHC-RG77 AR 4-238-409-63 (1)
GB
1
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
This appliance is classified
as a CLASS 1 LASER
product. The CLASS 1
LASER PRODUCT
MARKING is located on
the rear exterior.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains,
etc. And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
ENERGY STAR
registered mark.
As an ENERGY STAR® partner,
Sony Corporation has determined
that this product meets the
ENERGY STAR
energy efficiency.
®
is a U.S.
®
guidelines for
About this manual
The instructions in this manual are for
model MHC-RG77 and MHC-RG66T. In this
manual, the MHC-RG77 is used for illustration
purposes unless stated otherwise.
GB
2
MHC-RG77 AR 4-238-409-63 (1)
Table of Contents
List of Button Location and
Reference Pages
Main unit ............................................... 4
Remote Control ..................................... 5
Getting Started
Hooking up the system .......................... 6
Inserting two size AA (R6) batteries into
the remote ........................................ 8
Setting the clock .................................... 8
CD
Loading the CD ..................................... 9
Playing the CD
–– Normal Play/Shuffle Play/
Repeat Play ..................................... 9
Programming the CD tracks
–– Program Play ............................ 10
Tuner
Presetting radio stations ....................... 11
Listening to the radio
–– Preset Tuning ........................... 11
Tape
Loading a tape ..................................... 12
Playing a tape ...................................... 12
Recording to a tape
–– CD Synchro Recording/
High Speed Dubbing/Recording
Manually/Program Edit ................. 13
Timer-recording radio programs ......... 14
Sound Adjustment
Adjusting the sound ............................. 16
Selecting the speaker system ............... 16
Selecting the preset effect .................... 16
Adjusting the graphic equalizer and
storing the personal file ................. 17
Selecting the surround effect ............... 17
Other Features
Changing the spectrum analyzer
display ........................................... 18
Adjusting the brightness of the
display ........................................... 18
Enhancing the video game sound
— Game Sync ............................... 18
Mixing the sound
— Game Mixing ........................... 18
Singing along ....................................... 19
Falling asleep to music
— Sleep Timer .............................. 19
Waking up to music
— Daily Timer .............................. 20
Display
Turning off the display
— Power Saving Mode ................. 21
Using the display ................................. 21
Hooking Up the Optional
Components
Connecting an MD deck/VCR ............ 22
Connecting a Video Game Player ....... 22
Connecting external antennas .............. 23
GB
Troubleshooting
Problems and remedies ........................ 24
Additional Information
Precautions .......................................... 26
Specifications ...................................... 27
MHC-RG77 AR 4-238-409-63 (1)
GB
3
List of Button Location and Reference Pages
How to use this page
Use this page to find the location of buttons and other
parts of the system that are mentioned in the text.
Main unit
ALPHABETICAL ORDER
A - D
CD eg (7, 9, 10, 13, 14)
CD SYNC HI-DUB qf (13, 14)
DECK A A wh (12~14)
DECK B A qh (12~15)
DIMMER 9 (18)
DIRECTION q; (12~14)
DISC 1~3 4 (9, 10)
DISC SKIP EX-CHANGE 5 (9, 10)
Disc tray 3 (9)
DISPLAY 7 (21)
E - L
EDIT q; (14)
EFFECT ON/OFF rs (16)
ENTER ra (10, 11, 14, 15, 17, 20,
25)
FM MODE qs (11, 25)
1
23 4
GAME ea (18, 22)
GAME EQ rd (18)
GAME INPUT wd (13, 18)
GAME MIXING wl (13, 18)
GROOVE rf (16)
IR (receptor) 2
M - Q
MD (VIDEO) es (22, 24)
MIC wa (19)
MIC LEVEL w; (19)
MOVIE EQ ek (16)
MUSIC EQ eh (16)
OPEN/CLOSE Z 6 (9, 10)
P FILE r; (17)
PHONES (jack) ql (2 4)
PLAY MODE e; (9, 10, 14)
5
6
Illustration number
r
PLAY MODE e; (9, 10, 14)
R R
Name of button/part Reference page
R - Z
REC PAUSE/START qg (13, 14)
REPEAT qs (10)
SPECTRUM 8 (18)
SURROUND el (17)
SURROUND SPEAKER MODE
(MHC-RG77 only)
wj (16)
TAPE A/B ed (12, 13)
TUNER/BAND ef (11)
TUNER MEMORY e; (11)
VOLUME qa (20)
BUTTON DESCRIPTIONS
@/1 1
hH ws
x qd
X wk
> qj
. wg
M/+ qk
m/– wf
v/V/b/B ej
7
8
eg
ef
ed
es
ea
e;
wl
wk
wj
wh
wg
X
W
GB
4
qlw;waws
9
K
L
M
O
qh
qj
qk
0
N
rf
rdrs
ek
ejeh
el
r;
ra
MHC-RG77 AR 4-238-409-63 (1)
Remote Control
ALPHABETICAL ORDER
A - M P - Z
CD ql (7, 9, 10, 13, 14)
CLEAR 7 (10, 14)
CLOCK/TIMER SELECT 2
(15, 20)
CLOCK/TIMER SET 3 (8, 14,
20)
D.SKIP 9 (9)
ENTER qd (8, 10, 11, 14, 15, 17,
20)
EFFECT ON/OFF qf (16)
GAME w; (18, 22)
MD (VIDEO) q; (22)
ABC
Y
X
W
V
U
T
S
R
qj
PRESET – wd (11)
PRESET + wf (11)
PRESET EQ qj (16)
P FILE qh (17)
SURROUND SPEAKER MODE
(MHC-RG77 only) qs (16)
SURROUND (MHC-RG66T
only) qs (17)
SLEEP 1 (19)
TAPE A/B qa (12, 13)
TUNER/BAND qk (11)
TUNING – wa (11)
TUNING + ws (11)
VOL +/– 8 (20)
List of Button Location and Reference Pages
BUTTON DESCRIPTIONS
@/1 4
hH wg
X 5
x 6
. wd
> wf
m wa
M ws
v/V/b/B qg
D
E
6
7
8
9
q;
qa
qs
qd
qh
qf
qg
MHC-RG77 AR 4-238-409-63 (1)
GB
5
Getting Started
Hooking up the system
Do the following procedure 1 to 5 to hook up your system using the supplied cords and
accessories.
FM antenna
AM loop antenna
3
4
Surround
speaker (Right)
(MHC-RG77 only)
Front speaker
(Right)
1 Connect the front speakers.
Connect the speaker cords to the SPEAKER
(MHC-RG66T)/FRONT SPEAKER
(MHC-RG77) jacks.
Insert only the stripped portion.
LR
Black/Stripe (#)Red/Solid (3)
2 Connect the surround speaker
(MHC-RG77 only).
Connect the speaker cords to SURROUND
SPEAKER jacks.
Insert only the stripped portion.
Note
Keep the speaker cords away from the antennas to
prevent noise.
GB
6
LR
Black/Stripe (#)Blue/Solid (3)
1
2
2
5
Front speaker
(Left)
Surround
speaker (Left)
(MHC-RG77 only)
3 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Red
+
_
Blue
+
_
Jack type A
AM loop antenna
Jack type B
AM loop antenna
Extend the FM lead
antenna horizontally.
Extend the FM lead
antenna horizontally.
FM75
AM
FM75
AM
MHC-RG77 AR 4-238-409-63 (1)
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
Positioning the speakers
Place the front speakers at an angle of 45
degrees from your listening position.
120V
220V
230-
240V
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
To connect optional components
See page 22.
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Front
speaker
(L)
45º
Surround
speaker
(L)
(MHC-RG77 only)
Surround
speaker
(R)
(MHC-RG77 only)
Notice for carrying this system
Do the following to protect the CD
mechanism.
1 Make sure that all discs are removed
from the unit.
2 Hold down CD and then press ?/1 until
“LOCK” appears.
3 Release ?/1 first, then release CD.
4 Unplug the AC power cord.
Front
speaker
(R)
Getting Started
MHC-RG77 AR 4-238-409-63 (1)
GB
7
Inserting two size AA (R6)
batteries into the remote
AA (R6)
batteries
e
E
E
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Setting the clock
1 Turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
When you set the time for the first time,
proceed to step 5.
3 Press V or v repeatedly to select
CLOCK SET.
4 Press ENTER.
5 Press V or v repeatedly to set the hour.
6 Press ENTER.
7 Press V or v repeatedly to set the
minute.
8 Press ENTER.
The clock starts functioning.
Tip
If you have made a mistake or want to change the
time, start over from step 2.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
GB
8
MHC-RG77 AR 4-238-409-63 (1)
CD
Loading the CD
1 Press OPEN/CLOSE Z.
The CD compartment slides out.
2 Place a CD with the label side up on the
disc tray.
To insert additional discs, press DISC SKIP
EX-CHANGE to rotate the disc tray.
3 Press OPEN/CLOSE Z to close the CD
compartment.
Playing the CD
––Normal Play/Shuffle Play/Repeat
Play
This unit lets you play the CD in different play
modes.
Disc tray number
ALL1 DISCS
Disc presence
indicator
Track
number
Playing time
1 When playback is stopped, press PLAY
MODE repeatedly until the mode you
want appears in the display.
Select
ALL DISCS
1 DISC
SHUFFLE
ALL DISCS
SHUFFLE
1 DISC
PROGRAM
To play
All CDs in the disc tray
continuously.
The CD you have selected in the
original order.
The tracks on all CDs in random
order.
The tracks on the CD you have
selected in random order.
The tracks on all CDs in the
order you want them to be
played (see “Programming the
CD tracks” on page 10).
2 Press one of the DISC 1~3 buttons.
If you press hH when CD is selected as
the function (press CD) and the disc tray is
closed, playback starts from the selected
CD.
Tip
You cannot change the play mode during playback.
Other Operations
To
Stop playback
Pause playback
Select a track
Find a point in a track
Select a CD when
playback is stopped
Switch to CD function
from another source
Do this
Press x.
Press X.
Press again to resume
playback.
During playback or pause,
press > (to go forward)
or . (to go back).
Press and hold down M
or m during playback and
release it at the point you
want.
Press one of the DISC 1~3
buttons or DISC SKIP EXCHANGE (or D. SKIP on
the remote).
Press CD or one of the
DISC 1~3 buttons
(Automatic Source
Selection).
CD
continued
MHC-RG77 AR 4-238-409-63 (1)
GB
9
Playing the CD (continued)
To
Play repeatedly
(Repeat Play)
Cancel Repeat
Play
Exchange other CDs
while playing
Remove the CD
*1
All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*2
To repeat the current track you are playing.
Tip
Pressing the CD while the power is off automatically
turns the power on and CD is selected as a function.
Do this
Press REPEAT repeatedly to
select “REPEAT”
“REPEAT 1”*2.
Press REPEAT until
“REPEAT” or “REPEAT 1”
disappears from the display.
Press DISC SKIP
EX-CHANGE.
Press OPEN/CLOSE Z.
*1
or
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played.
1 Press CD.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
3 Press one of the DISC 1~3 to select a
CD.
To program all the tracks on a CD at once,
proceed to step 5 while “AL” appears on the
display.
4 Press . or > repeatedly until the
track you want appears in the display.
Total playing time
(including selected
track)
PROGRAM
Disc tray
number
Track
number
5 Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6 To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7 Press hH.
To
Cancel Program Play
Clear a track from
the end
Add a track to the
program when
playback is stopped
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press
hH to play the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
Do this
Press PLAY MODE
repeatedly until “1 DISC” or
“ALL DISCS” appears in
the display.
Press CLEAR on the remote
when playback is stopped.
1 Press one of the DISC
1~3 buttons to select a
CD.
2 Press . or >
repeatedly to select the
track.
3 Press ENTER.
10
GB
MHC-RG77 AR 4-238-409-63 (1)
Tuner
Presetting radio stations
You can preset 20 stations for FM and 10
stations for AM.
1 Press TUNER/BAND repeatedly to
select FM or AM.
2 Press and hold M or m (or TUNING
+/– on the remote) until “AUTO”
appears in the display and the
frequency indication starts to change,
then release.
Scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo program) appear.
AUTO
3 Press TUNER MEMORY.
A preset number appears in the display.
Preset number
MHz
Tips
• The preset stations are retained for half a day even
if you unplug the power cord or if a power failure
occurs.
• Pressing TUNER/BAND while the power is off
automatically turns the power on and TUNER is
selected as a function.
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner's memory first
(see “Presetting radio stations”).
1 Press TUNER/BAND repeatedly to
select FM or AM.
2 Press . or > (or press PRESET
+/– on the remote) to tune in the preset
station you want.
Preset number Frequency
MHz
Tuner
4 Press . or > to select the preset
number you want to store.
5 Press ENTER.
“COMPLETE” appears in the display.
The station is stored.
6 Repeat steps 1 to 5 to store other
stations.
To tune in a station with a weak
signal (Manual Tuning)
Press M or m (TUNING +/– on the remote)
repeatedly to tune in the station manually.
To change the AM tuning interval
(Except Middle Eastern models)
The AM tuning interval is factory set to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, select any AM station first, then turn off the
power. While holding down the ENTER button, turn
the power back on. When you change the interval,
AM preset stations will be erased. To reset the
interval, repeat the same procedure.
To listen to non-preset radio stations
Press M or m (or TUNING +/– on the
remote) repeatedly (Manual Tuning) or press
and hold M or m (or TUNING +/– on the
remote) (Automatic Tuning).
Tips
• When an FM program is noisy, press FM MODE so
that “MONO” appears in the display. There will be
no stereo effect, but the reception will improve.
• To improve broadcast reception, reorient the
antennas.
11
GB
MHC-RG77 AR 4-238-409-63 (1)
Tape
Loading a tape
1 Press TAPE A/B repeatedly to select
Deck A or B.
2 Press Z on the selected deck.
3 Insert a tape in deck A or B.
Insert with the
side you want to
play/record facing
forward.
Playing a tape
1 Load a tape.
2 Press DIRECTION repeatedly to select
g to play one side, j to play both
sides or RELAY* (Relay Play) to play
both decks in succession.
3 Press hH. The tape starts playing.
Press hH again to play the reverse side.
Tape presence indicator
ALL1 DISCS
* Relay Play always follow this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
To
Stop playback
Pause playback
Fast-forward
Rewind
Tips
• During j or Relay Play, the deck stops
automatically after repeating the sequence five
times.
• Pressing TAPE A/B while the power is off
automatically turns the power on and TAPE is
selected as a function.
• When a tape (tapes) is (are) inserted, corresponding
presence indicators light up.
Searching for the beginning of a
track (AMS*)
Do this
Press x.
Press X.
Press again to resume
playback.
Press M while playing the
front side, or press m while
playing the reverse side.
Press m while playing the
front side, or press M while
playing the reverse side.
During playback, press . or > repeatedly
for the number of songs you want to skip
forward (or backward).
The search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the unit is placed near a television.
12
GB
MHC-RG77 AR 4-238-409-63 (1)
Recording to a tape
–– CD Synchro Recording/High Speed Dubbing/Recording Manually/
Program Edit
You can record from a CD, tape, radio or other connected component. The recording level is adjusted
automatically.
Steps
1
2
3
4
Recording from a CD
(CD Synchro Recording)
Insert a recordable tape into deck B.
Press CD.
Load the CD you want to
record.
Press CD SYNC HI-DUB.
DECK B stands by for recording.
REC PAUSE/START indicator flashes.
Press DIRECTION repeatedly to select g to record on one side.
5
Select j (or RELAY) to record on both sides.
Press REC PAUSE/START. If you are recording manually, press hH to start
6
playing the source (for CD or Tape).
Recording starts.
Press x to stop recording.
7
Tips
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the reverse side:
After step 1, press TAPE A/B to select deck B and
press hH twice to start playback of the reverse
side. Press x at the point where you want to start
recording. The TAPE B reverse side indicator lights
up.
• (High-Speed Dubbing only)
If you set direction to j when the tapes you use
have different lengths, the tapes in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Recording from a tape
(High-Speed Dubbing)
Press TAPE A/B repeatedly
to select TAPE A.
Load the tape you want to
record into deck A.
• For recording from a CD to a tape manually:
You can press . or > to select tracks during
recording pause mode (after step 4 and before step
6).
• You can mix the sound from the component
connected to the GAME INPUT jacks with another
function such as CD, tape, radio or an MD
connected to this system. To record the mixed
sound, press GAME MIXING after step 4 of
“Recording Manually” and then press REC
PAUSE/START to start recording. Game Mixing
does not function during High-Speed Dubbing and
CD Synchro Recording.
Note
You cannot listen to other sources while recording.
Recording Manually
Press a function button
for the recording source.
Load the CD or tape
(or other audio
sources), or tune to the
station you want to
record.
Press REC PAUSE/
START.
continued
13
Tape
GB
MHC-RG77 AR 4-238-409-63 (1)
Recording to a tape (continued)
Recording a CD by specifying
track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programing, make sure
the playing times for each side do not exceed
the length of one side of the tape.
1 Insert a recordable tape into deck B,
then press CD.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
3 Press one of the DISC 1–3 button to
select a CD.
To program all the tracks on a CD at once,
proceed to step 6 while “AL” appears in the
display.
4 Press . or > repeatedly until the
tracks you want appears in the display.
5 Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6 To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7 Press CD SYNC HI-DUB.
Deck B standby for recording. The REC
PAUSE/START indicator flashes.
8 Press DIRECTION repeatedly to select
g to record on one side. Select j
(or RELAY) to record on both sides.
9 Press REC PAUSE/START.
Recording starts.
To
Cancel Program Edit
Clear a track from
the end
Tip
To check the required tape length for recording a CD,
press EDIT after you have loaded a CD and pressed
CD. The required tape length for the currently
selected CD appears, followed by the total playing
time for side A and side B respectively (Tape Select
Edit).
Note
You cannot use Tape Select Edit for discs containing
over 20 tracks.
Do This
Press PLAY MODE
repeatedly until “1 DISC” or
“ALL DISCS” appears in
the display.
Press CLEAR on the remote
when playback is stopped.
Timer-recording radio
programs
To timer-record, you must preset the radio
station (see “Presetting radio stations” on
page 11) and set the clock (see “Setting the
clock” on page 8) beforehand.
1 Tune in the preset radio station (see
“Listening to the radio” on page 11).
2 Press CLOCK/TIMER SET on the
remote.
“DAILY1 SET” appears.
3 Press V or v repeatedly to select “REC
SET”, then press ENTER.
“ON” appears and the hour indication flash
in the display.
4 Set the time to start recording.
Press V or v repeatedly to set the hour, then
press ENTER.
The minute indication starts flashing.
Press V or v repeatedly to set the minute,
then press ENTER.
The hour indication flashes again.
14
GB
MHC-RG77 AR 4-238-409-63 (1)
5 Set the time to stop recording following
the above procedure.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.
6 Insert a recordable tape into deck B.
Make sure the tape is in forward direction.
7 Turn off the power.
When the recording starts, the volume level
is set to the minimum.
To
Check the setting
Change the setting
Cancel timer
operation
Notes
• If the power is on at the preset time, the Timer
recording does not work.
• The power turns on 15 seconds before the preset
time.
Do this
Press CLOCK/TIMER
SELECT on the remote and
press V or v repeatedly to
select “REC SEL”. Then, press
ENTER.
Start from step 1.
Press CLOCK/TIMER
SELECT on the remote and
press V or v repeatedly to
select “TIMER OFF”. Then,
press ENTER.
Tape
MHC-RG77 AR 4-238-409-63 (1)
15
GB
Sound Adjustment
Adjusting the sound
You can reinforce the bass and create a more
powerful sound.
Press GROOVE.
Each time you press this button, the display
changes cyclically as follows:
GROOVE t V-GROOVE t GROOVE OFF
GROOVE
The volume switches to power mode and the
equalizer curve changes.
V-GROOVE
The volume switches to power mode, the low
base frequencies are powerfully reinforced, and
the equalizer curve changes.
Selecting the speaker
system
(MHC-RG77 only)
You can enjoy different sounds when you
select the surround speaker mode.
Press SURROUND SPEAKER MODE to
select the surround speaker mode you
want.
LINK : Reproduces the same sound with the
different output level.
MATRIX SUR : Reproduces a wide range of
sound that actually can sense the size of the
room.
Selecting the preset
effect
Press MUSIC EQ, MOVIE EQ or GAME EQ
(or PRESET EQ on the remote) repeatedly to
select the preset effect you want.
The preset effect name appears in the display.
See the chart “Preset effect options”.
To cancel the effect
Press EFFECT ON/OFF repeatedly until
“EFFECT OFF” appears.
Preset effect options
“
” appears if you select an effect with
SUR
surround effects.
MENU Effect
button
MUSIC ROCK
EQ POP
JAZZ
DANCE
SOUL
ORIENTAL*
MOVIE ACTION
EQ DRAMA
MUSICAL
GAME ARCADE
EQ RACING
ADVENTURE
* CLASSIC for Latin and North American models
only.
For
standard music
sources.
soundtracks and
special listening
situations.
Play station 1, 2 and
other video game
music sources.
16
GB
MHC-RG77 AR 4-238-409-62 (1)
Adjusting the graphic
equalizer and storing a
Selecting the surround
effect
personal file
You can adjust the sound by raising or
lowering the level of specific frequency band,
then store up to three personal files (P FILE) in
the memory.
Before operation, select the preset effect you
want for your basic sound.
1 Press b or B repeatedly to select a
frequency band or surround, then
press v or V to adjust the level or
select the surround effect.
Frequency band Frequency level
2 Press and hold P FILE until the
personal file number appears in the
display.
Press SURROUND.
Each time you press the button, the display
changes as follows:
SURROUND ON (
SURROUND OFF
Note
When you choose other sound effects, the surround
effect may be cancelled.
SUR
)
Y
Sound Adjustment
3 Press v or V or B or b to select the
personal file number (P FILE) where
you want to store the equalizer setting.
4 Press ENTER.
The setting is automatically stored as the
personal file you selected in step 3. The
previous setting stored at this memory
location is erased and replaced by the new
setting.
To call up the personal file
Press P FILE repeatedly until the personal file
number you want appears in the display.
Tip
If you do not want to store a personal file, press
ENTER after step 1.
MHC-RG77 AR 4-238-409-63 (1)
17
GB
Loading...