Sony KV-32FS10, KV-36FS10, KV-32FV15, KV-34FV10, KV-34FV15 Service Manual

MODEL NAME DESTINATION REMOTE COMMANDER CHASSIS NO.

SERVICE MANUAL

AA-2W

CHASSIS

KV-32FS10 U.S. RM-Y168 SCC-S32B-A

KV-32FS10 CND RM-Y168 SCC-S33B-A

KV-36FS10 U.S. RM-Y168 SCC-S32C-A

KV-36FS10 CND RM-Y168 SCC-S33C-A

KV-36FS10 HAWAII RM-Y168 SCC-S32HA

KV-32FV15 U.S. RM-Y171 SCC-S32D-A

KV-32FV15 CND RM-Y171 SCC-S33D-A

KV-34FV10 E RM-Y168 SCC-S34E-A

KV-34FV15 E RM-Y171 SCC-S34F-A

KV-34FV15C E RM-Y171 SCC-S34G-A

KV-34FV15K KOREA RM-Y149A SCC-S31B-A

KV-34FV15T TAIWAN RM-Y171 SCC-S36A-A

KV-36FV15 U.S. RM-Y171 SCC-S32G-A

KV-36FV15 CND RM-Y171 SCC-S33G-A

KV-36FV15 HAWAII RM-Y171 SCC-S32JA

KV-38FV15K KOREA RM-Y149A SCC-S31C-A

KV-34FX250C E RM-Y170 SCC-S34H-A

KV-38FX250 E RM-Y170 SCC-S34M-A

KV-38FX250C E RM-Y170 SCC-S34J-A

KV-38FX250T TAIWAN RM-Y170 SCC-S36B-A

KV-32XBR250 U.S. RM-Y170 SCC-S32E-A

KV-32XBR250 CND RM-Y170 SCC-S33E-A

KV-36XBR250 U.S. RM-Y170 SCC-S32F-A

KV-36XBR250 CND RM-Y170 SCC-S33F-A

KV-36XBR250 HAWAII RM-Y170 SCC-S32KA

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

ORIGINAL MANUAL ISSUE DATE: 5/1999

ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END OF THE PDF FILE.

REVISION DATE REVISION TYPE SUBJECT

5/1999 No revisions or updates are applicable at this time.

Correction-1 A Board Schematic - Critical Component Identied.

Correction-2 IC002 Part Number Correction

Correction-3 G Board Schematic Correction

Correction-4 Correction to Set-up Adjustments

Correction-5 A Board Schematic Correction

Correction-6 Addition of Hawaiian models; IC001 Part Number Correction;

Addition of ITC Assembly Part Number for Hawaiian models.

Correction-7 Tuner and Terminal labels for rear cover must be ordered separately

using the part numbers provided.

Supplement-1 HZ Board, Picture Tube View, and Electrical Parts List Update

Correction-8 IC643 Part Number Correction

9-965-868-02

— 1 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

TRINITRON

®

COLOR TV

MODEL DEST. COMMANDER CHASSIS NO.

KV-32FS10

U.S. RM-Y168 SCC-S32B-A

KV-32FS10

CND RM-Y168 SCC-S33B-A

KV-36FS10

U.S. RM-Y168 SCC-S32C-A

KV-36FS10

CND RM-Y168 SCC-S33C-A

KV-32FV15

U.S. RM-Y171 SCC-S32D-A

KV-32FV15

CND RM-Y171 SCC-S33D-A

KV-34FV10

E RM-Y168 SCC-S34E-A

KV-34FV15

E RM-Y171 SCC-S34F-A

KV-34FV15C

E RM-Y171 SCC-S34G-A

KV-34FV15K

KOREA RM-Y149A SCC-S31B-A

KV-34FV15T

TAIWAN RM-Y171 SCC-S36A-A

KV-36FV15

U.S. RM-Y171 SCC-S32G-A

KV-36FV15

CND RM-Y171 SCC-S33G-A

KV-38FV15K

KOREA RM-Y149A SCC-S31C-A

KV-34FX250C

E RM-Y170 SCC-S34H-A

KV-38FX250

E RM-Y170 SCC-S34M-A

KV-38FX250C

E RM-Y170 SCC-S34J-A

KV-38FX250T

TAIWAN RM-Y170 SCC-S36B-A

KV-32XBR250

U.S. RM-Y170 SCC-S32E-A

KV-32XBR250

CND RM-Y170 SCC-S33E-A

KV-36XBR250

U.S. RM-Y170 SCC-S32F-A

KV-36XBR250

CND RM-Y170 SCC-S33F-A

KV-36XBR250

SERVICE MANUAL

CHASSIS

AA-2W

RM-Y170

— 2 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

SPECIFICATIONS

Television system

American TV standard, NTSC

Channel coverage

VHF:2-13 / UHF:14-69 / CATV:1-125

Picture tube

FD Trinitron

®

tube

Visible screen size

32-inch picture measured diagonally (KV-32FS10, 32FV15,

32XBR250, 34FV10, 34FV15, 34FV15C, 34FV15K,

34FV15T, 34FX250C)

36-inch picture measured diagonally (KV-36FS10, 36FV15,

36XBR250, 38FX250, 38FX250C, 38FX250T, 38FV15K)

Actual screen size

34-inch picture measured diagonally (KV-32FS10,

32FV15, 32XBR250, 34FV10, 34FV15, 34FV15C,

34FV15K, 34FV15T, 34FX250C)

38-inch picture measured diagonally (KV-36FS10, 36FV15,

36XBR250, 38FX250, 38FX250C, 38FX250T, 38FV15K)

Antenna

75 ohm external antenna terminal for VHF/UHF

Supplied accessories

Remote control RM-Y149A (KV-34FV15K, 38FV15K)

Remote control RM-Y168 (KV-32FS10, 34FV10, 36FS10)

Remote control RM-Y170 (KV-32XBR250, 34FX250C,

36XBR250, 38FX250, 38FX250C, 38FX250T)

Remote control RM-Y171 (KV-32FV15, 34FV15, 34FV15C,

34FV15T, 36FV15)

Battery size AA (R6) w/2

Notes:

1)

1 Vp-p 75 ohms unbalanced, sync negative

2)

Y: 1 Vp-p 75 ohms unbalanced, sync negative

C: 0.286 Vp-p (Burst signal), 75 ohms

3)

Y: 1.0 Vp-p, 75 ohms, sync negative; PB: 0.7 Vp-p, 75 ohms;

P

R: Vp-p, 75 ohms

4)

500 mVrms (100% modulation), Impedance: 47 kilohms

5)

More than 408 mVrms at the maximum volume setting (variable)

More than 408 mVrms (fix); Impedance (Output): 2 kilohms

( l )



SRS (SOUND RETRIEVAL SYSTEM)

The ( l ) SRS (SOUND RETRIEVAL SYSTEM) is manu-

factured by Sony Corporation under license from SRS Labs,

Inc. It is covered by U.S. Patent No. 4,748,669. Other U.S.

and foreign patents pending.

The word ‘SRS’ and the SRS symbol ( l ) areregistered

trademarks of SRS Labs, Inc.

BBE and BBE symbol are trademarks of BBE Sound, Inc.

and are licensed by BBE Sound, Inc. under U.S. Patent

No. 4,638,258 and 4,482,866.

Optional accessories

Connecting Cables:

RK-74A, VMC-810/820/830HG, VMC-10HG/30HG,

VMC-720M, VMC-810S/820S, YC-15V/30V,

YC-15/30HG, RK-G69HG, RKC-515HG

TV Stand: SU-32FD2, SU-36FD2, SU-32XBR2,

SU-36XBR2

UV Mixer: EAC-66

Design and specifications are subject to change without notice.

**KV-34FV10

**KV-34FV15

**KV-34FV15C **KV-38FV15K

**KV-34FV15K *KV-38FX250

**KV-32FV15 **KV-34FV15T **KV-36FV15 *KV-38FX250C

KV-32FS10 *KV-32XBR250 *KV-34FX250C KV-36FS10 *KV-36XBR250 *KV-38FX250T

Power Requirements 120V,60Hz 120V,60Hz 120-220V,50/60Hz 120V,60Hz 120V,60Hz 120-220V,50/60Hz

Number of inputs/outputs

Video

1) 33 333 3

S Video

2) 22 222 2

Y, P

B

, P

R

3) 11 111 1

Audio 4) 3 3 3 3 3 3

Audio Out

5) 11 111 1

Monitor Out 1 1 1 1 1 1

TV Out

1) 4) 1 *1/**- *1/**- - *1/**- *1/**-

S-Link - YE S Y ES - YES YES

Speaker output (W) 10W x 2 15W x 2 15W x 2 10W x 2 15W x 2 15W x 2

Power Consumption (W)

In use (Max) 190W 200W 200W 190W 200W 200W

In Standby 2W 2W 2W 2 W 2W 2W

Dimensions (W/H/D)

(mm) 882 x 687 x 592 mm 975 x 757 x 633 mm

(in) 34

3/4

x 27 x 23

1/4

in 38

3/8

x 29

13/16

x 24

15/16

in

Mass

(kg) 80 kg 107 kg

(lbs) 176 lbs 236 lbs

— 3 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

Warnings and Caution ............................................................ 3

Safety Check Out Instructions ............................................... 4

1. GENERAL

Connecting and Installing the TV ............................................ 5

Basic Set Up .......................................................................... 7

Using Y our TV ......................................................................... 7

Using the Wireless Headphones ............................................ 8

Using Your Menus ................................................................... 9

Operating Video Equipment .................................................... 12

Operating a Cable Box or DBS Receiver ................................ 12

Troubleshooting ...................................................................... 13

2. DISASSEMBLY

2-1. Rear Cover Removal ....................................................... 14

2-2. Chassis Assembly Removal ............................................ 14

2-3. Service Position ............................................................... 15

2-4. Multi-Button Switch Removal............................................ 15

2-5. Picture Tube Removal ..................................................... 16

3. SET-UP ADJUSTMENTS

3-1. Beam Landing ................................................................. 17

3-2. Convergence ................................................................... 18

3-3. Focus ............................................................................... 20

3-4. Screen (G2) ..................................................................... 20

3-5. White Balance Adjustments ............................................. 20

4. SAFETY RELATED ADJUSTMENTS ....................................21

5. CIRCUIT ADJUSTMENTS ...................................................... 22

5-1. Method of Setting the Service Adjustment Mode .............22

5-2. Memory Write Confirmation Method ................................ 22

5-3. Adjust Buttons and Indicator ............................................ 22

5-4. Service Data .................................................................... 23

TABLE OF CONTENTS

6. DIAGRAMS

6-1. Block Diagram (1/5) ........................................................ 31

6-2. Block Diagram (2/5) ........................................................ 34

6-3. Block Diagram (3/5) ....................................................... 37

6-4. Block Diagram (UY PIP) (4/5) ......................................... 40

6-5. Block Diagram (UX PIP) (5/5) ......................................... 41

6-6. Circuit Boards Location ................................................... 42

6-7. Printed Wiring Boards and Schematic Diagrams ............ 42

• A Board ...................................................................... 43

• A Board Schematic Diagram ...................................... 45

• AK Board .......................... ......................................... 49

• C Board ...................................................................... 53

• G Board ...................................................................... 55

• GA Board .................................................................... 57

• HA Board .................................................................... 57

• HB Board .................................................................... 57

• HX Board .................................................................... 59

• T Board ....................................................................... 59

• UX Main Board ........................................................... 61

• UX PIP Board ............................................................. 65

• UY Main Board .......................................................... 69

• UY PIP Board ............................................................ 73

• WA Board ................................................................... 75

6-8. Semiconductors .............................................................. 77

7. EXPLODED VlEWS

7-1. Chassis ........................................................................... 78

7-2. Chassis ........................................................................... 80

7-3. Picture Tube .................................................................... 81

8. ELECTRICAL PARTS LIST

• Parts Listings .............................................................. 83

CAUTION!

AFTER REMOVING THE ANODE, SHORT CIRCUIT THE ANODE

OF THE PICTURE TUBE AND THE ANODE CAP TO THE METAL

CHASSIS, CRT SHIELD, OR CARBON PAINTED ON THE CRT.

WARNING!!

AN ISOLATION TRANSFORMER SHOULD BE USED DURING ANY

SERVICE TO AVOID POSSIBLE SHOCK HAZARD, BECAUSE OF

LIVE CHASSIS. THE CHASSIS OF THIS RECEIVER IS DIRECTLY

CONNECTED TO THE AC POWER LINE.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY SHADING AND MARK ¡ ON

THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE

PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE

THESE COMPONENTS WITH SONY PARTS WHOSE PART

NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN

SUPPLEMENTS PUBLISHED BY SONY. CIRCUIT

ADJUSTMENTS THAT ARE CRITICAL FOR SAFE OPERATION

ARE IDENTIFIED IN THIS MANUAL. FOLLOW THESE

PROCEDURES WHENEVER CRITICAL COMPONENTS ARE

REPLACED OR IMPROPER OPERATION IS SUSPECTED.

ATTENTION!

APRES AVOIR DECONNECTE LE CAP DE L'ANODE, COURT-CIRCUITER L'ANODE

DU TUBE CATHODIQUE ET CELUI DE L'ANODE DU CAP AU CHASSIS METALLIQUE

DE L'APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LE TUBE CATHODIQUE

OU AU BLINDAGE DU TUBE CATHODIQUE.

ATTENTION!!

AFIN D'EVITER TOUT RESQUE D'ELECTROCUTION PROVENANT D'UN CHÁSSIS

SOUS TENSION, UN TRANSFORMATEUR D'ISOLEMENT DOIT ETRE UTILISÉ LORS

DE TOUT DÉPANNAGE. LE CHÁSSIS DE CE RÉCEPTEUR EST DIRECTEMENT

RACCORDÉ À L'ALIMENTATION SECTEUR.

ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!

LES COMPOSANTS IDENTIFIES PAR UNE TRAME ET PAR UNE MARQUE ¡ SUR

LES SCHEMAS DE PRINCIPE, LES VUES EXPLOSEES ET LES LISTES DE PIECES

SONT D'UNEIMPORT ANCE CRITIQUE POUR LA SECURITE DU FONCTIONNEMENT.

NE LES REMPLACER QUE PAR DES COMPOSANTS SONY DONT LE NUMERO DE

PIECE EST INDIQUE DANS LE PRESENT MANUEL OU DANS DES SUPPLEMENTS

PUBLIES PAR SONY. LES REGLAGES DE CIRCUIT DONT L'IMPORT ANCE EST CRI-

TIQUE POUR LA SECURITE DU FONCTIONNEMENT SONT IDENTIFIES DANS LE

PRESENT MANUEL. SUIVRE CES PROCEDURES LORS DE CHAQUE

REMPLACEMENT DE COMPOSANTS CRITIQUES, OU LORSQU'UN MAUVAIS

FONTIONNEMENT SUSPECTE.

WARNINGS AND CAUTIONS

Section Title PageSection Title Page

— 4 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

SAFETY CHECK-OUT

After correcting the original service problem, perform the

following safety checks before releasing the set to the

customer:

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and

from all exposed metal parts to any exposed metal part having a

return to chassis, must not exceed 0.5 mA (500 microampere).

Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or

RCA WT-540A. Follow the manufacturers' instructions to

use these instructions.

2. A battery-operated AC milliammeter. The Data Precision

245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of

a VOM or battery-operated AC voltmeter. The "limit"

indication is 0.75 V, so analog meters must have an accurate

low voltage scale. The Simpson's 250 and Sanwa

SH-63Trd are examples of passive VOMs that are suitable.

Nearly all battery operated digital multimeters that have a

2V AC range are suitable. (See Fig. A)

1. Check the area of your repair for unsoldered or poorly-

soldered connections. Check the entire board surface

for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires

are “pinched” or contact high-wattage resistors.

3. Check that all control knobs, shields, covers, ground

straps, and mounting hardware have been replaced.

Be absolutely certain that you have replaced all the

insulators.

4. Look for unauthorized replacement parts, particularly

transistors, that were installed during a previous

repair. Point them out to the customer and

recommend their replacement.

5. Look for parts which, though functioning, show

obvious signs of deterioration. Point them out to

the customer and recommend their replacement.

6. Check the line cords for cracks and abrasion.

Recommend the replacement of any such line cord

to the customer.

7. Check the B+ and HV to see if they are specified

values. Make sure your instruments are accurate;

be suspicious of your HV meter if sets always have

low HV.

8. Check the antenna terminals, metal trim, “metallized"

knobs, screws, and all other exposed metal parts for

AC Leakage. Check leakage as described below.

HOW TO FIND A GOOD EARTH GROUND

A cold-water pipe is guaranteed earth ground; the cover-plate

retaining screw on most AC outlet boxes is also at earth ground.

If the retaining screw is to be used as your earth-ground, verify

that it is at ground by measuring the resistance between it and a

cold-water pipe with an ohmmeter. The reading should be zero

ohms. If a cold-water pipe is not accessible, connect a 60-l00 watts

trouble light (not a neon lamp) between the hot side of the re-

ceptacle and the retaining screw. Try both slots, if necessary, to

locate the hot side of the line, the lamp should light at normal

brilliance if the screw is at ground potential. (See Fig. B)

To Exposed Metal

Parts on Set

Fig. A. Using an AC voltmeter to check AC leakage.

Fig. B. Checking for earth ground.

Cold-water Pipe

Ohmmeter

AC Outlet Box

Trouble Light

Earth Ground

0.15 F

µ

1.5k

Ω

AC

Voltmeter

(0.75 V)

— 5 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

SECTION 1 GENERAL

The instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers shown reflect those of the Operating Instruction Manual.

2

Cable or antenna only 3

Cable and antenna 3

Cable box 4

Cable box and cable to view scrambled channels 4

VCR and cable or antenna 5

VCR and cable box 5

Two VCRs for tape editing 6

Satellite Receiver 7

VCR and Satellite Receiver 7

DVD Player 8

DVD Player with component video output connectors 8

Audio system 9

Camcorder to view tapes 9

CONTROL S 10

VCR using S-Link 11

Satellite Receiver using S-Link 11

Connecting and Installing the TV

Refer to the table below, it will direct you to the diagram suitable to the equipment you will be

connecting.

If you will be connecting See page

Making Connections

3

A

• VHF only

or

• VHF/UHF

or

• Cable

B

• VHF only

or

• UHF only

or

• VHF/UHF

C

• VHF

and

• UHF

Note about the AC Power Cord

The AC power cord is attached to the rear of

the TV with hooks. Use caution when

removing the AC plug from its holder. Gently

slide the cord in the upward direction, without

removing the cord from the two lower hooks.

Cable or Antenna Connections

Connecting directly to cable or an

antenna

The connection you choose will depend on the

cable found in your home. Newer homes will

be equipped with standard coaxial cable (see

A

); older homes will probably have 300-ohm

twin lead cable (see

B

); still other homes may

contain both (see

C

).

Antenna connector

(Rear of TV)

VHF/UHF

300-ohm twin

lead cable

(Rear of TV)

VHF/UHF

75-ohm

coaxial cable

75-ohm coaxial cable

300-ohm twin lead cable

(Rear of TV)

VHF/UHF

EAC-66 U/V mixer

(not supplied)

Cable and antenna

If your cable provider does not feature local

channels, you may find this set up convenient.

Select CABLE or antenna (ANT) mode by

pressing ANT on the remote control.

Note

In order to receive channels with an antenna,

you will need to turn your CABLE to OFF and

perform the AUTO PROGRAM function, (see

page 23).

(Rear of TV)

AUX

VHF/UHF

TO CONVERTER

(No connection "TO

CONVERTER" in this case)

CATV cable

Antenna cable

Do not remove

the cord from

these hooks.

AC Power

cord

You can

detach the

cord from

this hook

4

Connecting and Installing the TV (continued)

Cable Box Connections

Some pay cable TV systems use scrambled or

encoded signals that require a cable box to

view all channels.

Cable box

1

Connect the coaxial connector from your

cable to the IN on your cable box.

2

Using a coaxial cable, connect OUT on

your cable box to VHF/UHF on your TV.

Cable box and cable

For this set up, you can switch between

scrambled channels (through your cable box),

and normal (CATV) channels by pressing

ANT on your remote control.

Notes

• Your Sony remote control can be

programmed to operate your cable box,

(see page 31).

• When using PIP, you cannot view the

AUX input in the window picture.

Tip z

Pressing ANT switches between these inputs.

TO CONVERTER

Cable box

VHF/UHF

(Rear of TV)

AUX

75-ohm coaxial cable (not supplied)

CATV cable (unscrambled channels)

(signal)

If you are connecting a cable box through the AUX input and

would like to switch between the AUX and normal (CATV) input

you should consider using the CHANNEL FIX feature, (see page 23).

Cable box

Cable

OUT

IN

(Rear of TV)

VHF/UHF

If you will be controlling all channel selection

through your cable box, you should consider

using the CHANNEL FIX feature, (see page 23).

OUT

IN

5

VIDEO IN

134

L

R

(

MONO

)

VIDEO

S VIDEO

OUT

AUDIO

L

R

Y

P

B

PR

AUDIO

S-LINK

CONTROL S

AUX

TO

CONVERTER

VHF/UHF

AUDIO R AUDIO L VIDEO

LINE

OUT

OUT

IN

Coaxial cable

(Rear of TV)

Cable/

antenna

VCR

3

1

2

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

VCR Connections

Connecting an antenna/cable TV

system with a VCR

1 Attach the coaxial connector from your

cable or antenna to IN on your VCR.

2 Using A/V connectors, connect AUDIO

and VIDEO OUT on your VCR to AUDIO

and VIDEO IN on your TV.

3 Using a coaxial connector, connect OUT on

your VCR to VHF/UHF on your TV.

Tip z

If you are connecting a monaural VCR, connect only the

single white audio output to the left input on your TV.

Connecting a VCR and TV with a

cable box

1 Connect the coaxial cable from the wall to

IN on your cable box .

2 Using a coaxial connector, connect OUT on

your cable box to IN on your VCR.

3 Connect a coaxial cable (not supplied)

from the OUT jack on your VCR to

VHF/UHF on your TV.

4

Using A/V connectors, connect AUDIO and

VIDEO OUT on your VCR to AUDIO and

VIDEO IN on your TV.

VIDEO IN

134

L

R

(

MONO

)

VIDEO

S VIDEO

OUT

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

AUX

TO

CONVERTER

VHF/UHF

AUDIO R AUDIO L VIDEO

LINE

OUT

OUT

IN

OUT

IN

(Rear of TV)

Cable box

4

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

VCR

Cable

Coaxial cable

2

1

For optimum picture quality, use S VIDEO

instead of the yellow A/V cable. S VIDEO

does not provide sound, your audio

connectors must still be connected.

3

— 6 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

6

Connecting two VCRs for tape editing

MONITOR OUT gives you the ability to use a

second VCR to record a program being played

by the primary VCR or to perform tape

editing and dubbing.

1 Connect the VCR intended for playback

using the connection instructions on

page 5 of this manual.

2 Using A/V connectors, connect AUDIO

and VIDEO IN on your VCR intended for

recording to MONITOR AUDIO and

VIDEO OUT on your TV.

Note

You cannot record signals from equipment

connected to the Y, P

B, PR input.

Connecting and Installing the TV (continued)

OUT

MONITOR

AUDIO

(

VAR/FIX

)

VIDEO IN

134

IN

L

R

(

MONO

)

VIDEO VIDEO

S VIDEO

OUT

AUDIO

L

R

(

MONO

)

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

LINE

OUT

OUT

IN

LINE

IN

OUT

IN

AUDIO R AUDIO L VIDEO AUDIO R AUDIO L VIDEO

VCR (for playback)

VCR (for recording)

(Rear of TV)

1

2

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

To perform tape editing; set the

TV to the video input intended for

playback by pressing TV/VIDEO.

7

Satellite Receiver Connections

Connecting a satellite receiver

1

Connect the cable from your satellite

antenna to SATELLITE IN on your receiver.

2

Attach the coaxial connector from your

cable or antenna to VHF/UHF on your TV.

3

Using A/V connectors, connect AUDIO

and VIDEO OUT on your receiver to

AUDIO and VIDEO IN on your TV.

Connecting a satellite receiver and

a VCR

1

Connect the cable from your satellite

antenna to SATELLITE IN on your receiver

.

2

Attach the coaxial connector from your

cable or antenna to IN on your VCR.

3

Using a coaxial connector, connect OUT

on your VCR to VHF/UHF on your TV.

4

Using A/V connectors, connect AUDIO

and VIDEO OUT on your receiver to

AUDIO and VIDEO IN on your VCR.

5

Using A/V connectors, connect AUDIO

and VIDEO OUT on your VCR to AUDIO

and VIDEO IN on your TV.

VIDEO IN

134

L

R

(

MONO

)

VIDEO

S VIDEO

OUT

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

AUX

TO

CONVERTER

VHF/UHF

AUDIO R AUDIO L VIDEO

AUDIO R AUDIO L VIDEO

SATELLITE IN

VHF/UHF

S VIDEO

OUT

IN

LINE OUT

LINE IN

VHF/UHF

OUT

IN

LINE OUT

1

2

3

4

5

(Rear of TV)

Satellite receiver

VCR

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

VIDEO IN

134

L

R

(

MONO

)

VIDEO

S VIDEO

OUT

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

AUX

TO

CONVERTER

VHF/UHF

VHF/UHF

OUT

IN

LINE OUT

SATELLITE IN

AUDIO R AUDIO L VIDEO

Satellite receiver

(Rear of TV)

Satellite

antenna

cable

1

3

2

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

For optimum picture quality, use S VIDEO

instead of the yellow A/V cable. S Video does

not provide sound, your audio connectors

must still be connected.

Pressing TV/VIDEO on the remote control will allow

you to view from the satellite receiver or VCR.

8

DVD Player Connections

Connecting a DVD Player

1

Using audio connectors, connect AUDIO

OUT on your DVD player to AUDIO IN on

your TV.

2

Using an S VIDEO cable, connect S VIDEO

on your DVD player to S VIDEO on your TV.

Connecting a DVD Player with

component video output connectors

Except KV-27FV15

This connection option offers the highest

quality DVD picture.

1

Using AUDIO connectors, connect AUDIO R

and L of the LINE OUT on your DVD player

to AUDIO R and L on the VIDEO IN 4 panel

at the rear of your TV.

2

Using three VIDEO connectors, connect

Y, P

B

, and P

R

on the COMPONENT VIDEO

OUT on your DVD player to Y, P

B

, and P

R

on the VIDEO IN 4 panel at the rear of your

TV.

Note

Some DVD player terminals may be labeled Y,

C

B

, and C

R

, or Y, B-Y, and R-Y. If so, connect

them by matching the colors.

Connecting and Installing the TV (continued)

134

L

R

(

MONO

)

VIDEO

S VIDEO

OUT

AUDIO

L

R

Y

PB

PR

AUDIO

S-LINK

CONTROL S

LINE OUT

S VIDEO OUT

S-LINK

DIGITAL OUT

R–AUDIO 1–L VIDEO

OPTICAL COAXIAL

VIDEO IN

R-YY B-Y

COMPONENT VIDEO OUT

DVD

(Rear of TV)

Video connectors

1

2

AUDIO-R (red)

AUDIO-L (white)

134

L

R

(

MONO

)

VIDEO

S VIDEO

OUT

AUDIO

L

R

Y

PB

PR

AUDIO

S-LINK

CONTROL S

VIDEO IN

AUDIO R AUDIO L VIDEO

S VIDEO

LINE OUT

1

(Rear of DVD player)

AUDIO-R (red)

AUDIO-L (white)

(Rear of TV)

S VIDEO cable

9

Connecting an A/V receiver

1

Using A/V cables, connect TV OUT on

your TV to TV IN on your A/V receiver.

2

Using A/V cables, connect A/V OUT on

your receiver to VIDEO IN on your TV.

Note

If you will be connecting your A/V receiver to

external speakers, you do not need to connect

AUDIO OUT on your A/V receiver to

AUDIO IN on your TV.

Tip z

You may want to use CHANNEL FIX to fix your TV's

input to the A/V receiver (VIDEO 1). (see “CHANNEL

SET UP” on page 26)

OUT

MONITOR

AUDIO

(

VAR/FIX

)

TV

VIDEO IN

134

IN

L

R

(

MONO

)

VIDEO VIDEO

S VIDEO

OUT

AUDIO

L

R

(

MONO

)

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

A/V outputs

2

1

A/V inputs

A/V receiver

(Rear of TV)

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

Additional Connections

Connecting an audio system

For an enhanced sound, connect your audio

system to your TV.

1

Using AUDIO connectors, connect AUDIO

OUT on your TV to one of the unused Line

inputs (e.g. Tape-2, AUX1, etc.) on your

stereo.

2

Set your stereo to the chosen Line input

and use the AUDIO

menu to set your

audio output, (see page 20).

VIDEO IN

134

OUT

MONITOR

AUDIO

(

VAR/FIX

)

IN

L

R

(

MONO

)

VIDEO VIDEO

S VIDEO

OUT

AUDIO

L

R

(

MONO

)

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

HRD

Line

input

AUDIO-R (red)

AUDIO-L (white)

(Rear of TV)

1

2

9

Connecting a camcorder

This connection is convenient for viewing a

picture directly from your camcorder.

Using A/V connectors, connect AUDIO and

VIDEO OUT on your camcorder to AUDIO

and VIDEO IN on your TV.

Tip z

If you are connecting a monaural camcorder, connect

only the single white audio output to the left input on

your TV.

VIDEO 2 INPUT

VIDEO L

(MONO)

-AUDIO-R

S VIDEO

A/V output

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

If you have an S VIDEO equipped camcorder,

you can use an S Video cable for optimum

picture quality.

— 7 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

11

OUT

IN

LINE

OUT

AUDIO R AUDIO L VIDEO

VIDEO IN

134

OUT

MONITOR

AUDIO

(

VAR/FIX

)

IN

L

R

(

MONO

)

VIDEO VIDEO

S VIDEO

OUT

AUDIO

L

R

(

MONO

)

AUDIO

L

R

Y

P

B

PR

AUDIO

S-LINK

CONTROL S

S-LINK

Connecting S-Link to a VCR

KV-27FV15, 32FV15, 36FV15 only

S-Link automatically powers on the TV and

switches to the correct video input when a

tape is inserted in the VCR.

1

Using A/V connectors, connect AUDIO

and VIDEO OUT on your VCR to AUDIO

and VIDEO IN on your TV.

2

Using an S-Link connector (mono mini

plug), connect S-LINK on your VCR to

S-LINK/CONTROL S-OUT in the same

VIDEO IN column on your TV.

Connecting S-Link to a satellite

receiver

KV-27FV15, 32FV15, 36FV15 only

When you power on the satellite receiver ,

S-Link automatically powers on the TV and

switches to the correct video input.

1

Using A/V connectors, connect AUDIO

and VIDEO OUT on your satellite receiver

to AUDIO and VIDEO IN on your TV.

2

Using an S-Link connector (mono mini

plug), connect S-LINK on your satellite

receiver to S-LINK/CONTROL S-OUT in

the same VIDEO IN column on your TV.

Note

The S-Link feature will override the “SKIP”

VIDEO LABEL input, (see page 22).

2

1

(Rear of TV)

VCR

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

VHF/UHF

OUT

IN

LINE

OUT

SATELLITE IN

AUDIO R AUDIO L VIDEO

VIDEO IN

134

OUT

MONITOR

AUDIO

(

VAR/FIX

)

IN

L

R

(

MONO

)

VIDEO VIDEO

S VIDEO

OUT

AUDIO

L

R

(

MONO

)

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

S-LINK

2

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

1

(Rear of TV)

Satellite receiver

The S-Link connector must be in the same

VIDEO-IN column as the connected A/V cables.

12

Inserting batteries

Insert two size AA (R6) batteries (supplied) by

matching the + and – on the batteries to the

diagram inside the battery compartment.

Notes

• Remove the batteries to avoid damage

from possible battery leakage whenever

you anticipate that the remote control will

not be used for an extended period.

• Handle the remote control with care.

Avoid dropping it, getting it wet, or

placing it in direct sunlight, near a heater,

or where the humidity is high.

•

Your remote control can be programmed to

operate most video equipment, (see page 29).

Using the remote control

move & select buttons

The supplied remote control has "arrow"

buttons (V, v, B, b) which allow for

movement of the on-screen (z ) cursor.

Pressing on the outer buttons will cause the

cursor to move in the corresponding direction.

Pressing the center button (

) will select the

item.

Front panel menu control

The front panel menu controls allow access to

the on-screen menus without the use of a

remote control. Pressing the MENU button

will bring up the on-screen menus. The arrow

buttons, (V,v) move the on-screen cursor in

the menus and the (

) button selects the

menu item.

Select

Basic Set Up

Move

0

CHVOL

CODE SET

RESET MENU

GUIDE

TV/SAT

MENU

13

Setting up the TV automatically

After you have finished connecting your TV,

you will want to run AUTO PROGRAM to set

up your channels.

The AUTO PROGRAM feature does not apply for

installations that use a cable box for all channel

selection.

Tips z

• Perform this function during the day, with the

antenna and/or cable properly connected, to ensure

that all available channels will be broadcasting and

receivable.

• If your cable or antenna is connected to AUX,

press ANT until AUX appears next to the channel

number.

Using Your New TV

Using the buttons on the top of the TV:

1

Press POWER to turn on the TV.

The initial setup screen appears.

First please connect

cable/antenna

EXIT:

AUTO PROGRAM:

[ CH – ]

[ CH + ]

2

Press CH + to run AUTO PROGRAM or

press CH – to exit.

AUTO PROGRAM

Tip z

To reset your TV to factory settings, turn the TV on.

Then, while pressing the RESET button on your remote

control, press the POWER button on your TV. The TV

will turn itself off, then back on.

11

Using Special Sony Features

Using the CONTROL S feature

CONTROL S allows you to control your TV

and other Sony equipment with one remote

control.

Using the supplied CONTROL S cable,

connect CONTROL S IN on your Sony

equipment, (e.g. VCR) to CONTROL S OUT

on your TV.

Tip z

You can also program your remote control to operate

other equipment, (see page 34).

Using the Vertical Compression

feature

These models use a feature called “vertical

compression” to achieve maximum picture

quality on widescreen sources, including

selected DVDs. This feature compresses the

height of each line for a higher resolution of

the picture.

To enjoy this feature, set your Sony DVD

player to 16:9 mode. The widescreen source

will be automatically detected and displayed

with maximum picture quality.

(Rear of TV)

VIDEO IN

134

OUT

MONITOR

AUDIO

(

VAR/FIX

)

IN

TV

L

R

(

MONO

)

VIDEO VIDEO

S VIDEO

OUT

AUDIO

L

R

(

MONO

)

AUDIO

L

R

Y

P

B

P

R

AUDIO

S-LINK

CONTROL S

IN

OUT

CONTROL S

— 8 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

14

Press when you want to turn connected equipment on and off.

Press when you want to control connected equipment with your remote control, (see

pages 29-31 for instructions on programming your remote control).

Use for direct channel selection. Press 0-9 to select a channel, the channel will

change after 2 seconds, or you can press ENTER for immediate selection.

Cycles through the VIDEO MODE settings: VIVID, SPORTS, MOVIE, STANDARD

.

Alternates back and forth between the last two channels selected with the 0-9 keys.

Instantly turns off the sound. Press again or press VOL + to restore sound.

Turns the TV off in approximately 30, 60, or 90 minutes. Cancel by pressing until

SLEEP OFF appears.

Press to return to factory settings while in the on-screen menus.

Watching the TV

The following chart explains more advanced buttons

on your remote control.

Using the White Labeled Buttons for TV Operations

VTR/DVD

POWER

SAT/CABLE

TV

VTR/DVD

TVSAT/CABLE

FUNCTION

0 9

-

JUMP

MUTING

SLEEP

REFER TO THE

ILLUSTRATION OF THE

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

PICTURE

MODE

RESET

Using Your New TV (continued)

15

SYSTEM OFF

Press once to display current time (if set) and channel number.

Press again to activate current CAPTION VISION setting.

To cancel, press DISPLAY until DISPLAY OFF appears.

Press repeatedly to cycle through available video inputs:

TV, VIDEO 1, VIDEO 2, VIDEO 3 and VIDEO 4

Press to change the VHF/UHF input to the AUX input.

Press when you are finished using a VCR and you want to switch to the TV input.

Your VCR power will remain on.

Cycles through the Multi-channel TV Sound (MTS) options: STEREO, SAP (Second

Audio Program), MONO (see page 20).

Powers off all Sony equipment at once.

This feature may not work with older Sony equipment.

Cycles through the available audio settings.

Using the White Labeled Buttons for TV Operations

DISPLAY

TV/VIDEO

ANT

+

TV/VTR

MTS/SAP

TV/SAT

(AUX input)

16

Displays the window picture. Press again to decrease the size. To cancel, press

until the window picture turns off.

Cycles through available video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4

Alternates sound between the main picture and the window picture.

A

will appear to indicate which picture is receiving sound.

Changes the channel in the window picture.

Moves the location of the window picture.

Press to freeze the window picture. Press again to restore the picture.

Switches the position of the main picture with the window picture.

Use the Yellow Labeled Buttons for PIP Operations

Using Picture-in-Picture – PIP

KV-27FV15, 32FV15, 36FV15 only

These models are equipped with dual tuners.

This means that PIP is “ready to use”.

Notes

• You must press TV (FUNCTION) before

you can control PIP with the yellow labeled

buttons.

• The AUX input cannot be viewed in the

window picture.

PIP

TV/VIDEO

AUDIO

+

TV/VTR

-

CH

POSITION

REFER TO THE ILLUSTRATION

OF THE REMOTE CONTROL ON

THE INSIDE FRONT COVER OF

THIS MANUAL AS YOU REVIEW

THIS CHART

Main

picture

Indicates which channel is

currently receiving sound

Channel number

of the main

picture

Channel number

of the window

picture

Window

picture

FREEZE

SWAP

Using Your New TV (continued)

18

Setting Up the Headphones

Install the supplied size AA (R6) battery into

the headphones.

1

Open the battery compartment lid by

pressing and sliding the lid as illustrated.

2

Lift the cover and insert the battery into

the compartment with the positive side up

and then close the lid.

Notes

• When used continuously, the battery will last:

— up to 40 hours with alkaline batteries.

— up to 20 hours with manganese batteries.

• Replace the battery with a new one when the

sound becomes weak.

Using the Headphones

1

Press .

The 2 icon and channel number are

displayed.

2

Turn the power on by placing the

headphones securely on your head.

If you only want to listen to the sound from

the cordless headphones, turn down the TV

speaker volume, or press MUTING.

3

To turn off the headphones, remove them

from your head and press

.

Tip z

For optimal sound reception, do not cover the infrared

transmitter on the TV or the infrared sensors on the

headphones.

Notes

• To help prevent possible hearing damage

due to sudden or prolonged excessive

volume, do not set the headphone

volume too high while using them.

• To prevent possible damage to the

infrared transmitter in the television,

please press the

to turn off the

headphone feature when the headphones

are not in use.

Using the Wireless Headphones

MENU

GUIDE

VOL

TV/SAT

CH

SWAP

MODE

PICTURE

MODE

Infrared sensors

Infrared transmitter

Power indicator

Volume control

— 9 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

17

Learning menu selection

Use the MENU button to access a menu and

use the arrow buttons (V or v) to alter settings.

Use the following example, in which we

activate the CABLE, to learn how to modify

settings.

1

Press the MENU button.

The main menu appears.

MENU

VIDEO

MODE : VIVID

PICTURE

BRIGHTNESS

COLOR

HUE

SHARPNESS

Move Exit

MENU

Select

TRINITONE: HIGH

COLOR CORRECT: OFF

MENU

B

2

Press V or v to highlight the desired menu

(in this case SET UP

), and press

to

select it.

SET UP

CHANNEL SET UP

CAPTION VISION: CC1

PARENTAL CONTROL

VIDEO LABEL

TILT CORRECTION

MENU

Move Exit

MENU

Select

LANGUAGE: ENGLISH

DEMO

B

3

Press V or v to move to the desired option

and press

.

SET UP

CHANNEL SET UP

CAPTION VISION: CC1

PARENTAL CONTROL

VIDEO LABEL

TILT CORRECTION

MENU

Move Exit

MENU

Select

LANGUAGE: ENGLISH

DEMO

B

4

Press V or v to move to the desired feature

and press

.

Options for your selection will be

highlighted.

CHANNEL SET UP

CABLE: OFF

CHANNEL FIX: OFF

AUTO PROGRAM

CHANNEL SKIP/ADD

CHANNEL CAPTION

MENU

Move Exit

MENU

Select

FAVORITE CHANNEL

5

Press V or v to make your selection and

press

.

CHANNEL SET UP

CABLE: ON

CHANNEL FIX: OFF

AUTO PROGRAM

CHANNEL SKIP/ADD

CHANNEL CAPTION

MENU

Move Exit

MENU

Select

FAVORITE CHANNEL

When you are finished making changes to the

selected menu, choose

MENU to return to

the main menu.

SET UP

CHANNEL SET UP

CAPTION VISION: CC1

PARENTAL CONTROL

VIDEO LABEL

TILT CORRECTION

MENU

Move Exit

MENU

Select

LANGUAGE: ENGLISH

DEMO

B

Tip z

Pressing MENU on the remote control will allow you to

exit from the menus at any time.

Using Your Menus

18

The VIDEO menu will allow you to make adjustments to your picture settings. It

will also allow you to customize the picture MODE based on the type of program

you are viewing.

The AUDIO menu offers enhanced audio options such as listening to second

audio programming (SAP), or customizing the EFFECT of the sound on your TV.

The TIMER menu sets the clock on your TV and allows you to program your TV

for scheduled viewing using the ON/OFF TIMER.

The SET UP menu provides several options for setting up

your channels, labeling your TV/VIDEO inputs, and

selecting the LANGUAGE of your menus.

The CHANNEL SET UP menu is a sub-menu which

provides further options for setting up your TV.

The Basic Menu provides quick access to frequently used

settings.

Quick start to the menus

The following is a guide to your menus.

To select a menu:

Note

Menus shown are for KV-36FV15, your menus

may not look exactly like those illustrated.

CHANNEL SET UP

CABLE: ON

CHANNEL FIX: OFF

AUTO PROGRAM

CHANNEL SKIP/ADD

CHANNEL CAPTION

MENU

Move Exit

MENU

Select

FAVORITE CHANNEL

MENU

Display Highlight Select

VIDEO

MODE : VIVID

PICTURE

BRIGHTNESS

COLOR

HUE

SHARPNESS

Move Exit

MENU

Select

TRINITONE: HIGH

COLOR CORRECT: OFF

MENU

B

AUDIO

TREBLE

BASS

BALANCE

AUTO VOLUME : OFF

MTS : STEREO

SPEAKER : ON

AUDIO OUT : VARIABLE

MENU

Move Exit

MENU

Select

B

EFFECT : OFF

TIMER

– – –

– –:– – AM

CURRENT TIME SET

ON/OFF TIMER

DAYLIGHT SAVING: NO

MENU

Move Exit

MENU

Select

B

SET UP

CHANNEL SET UP

CAPTION VISION: CC1

PARENTAL CONTROL

VIDEO LABEL

TILT CORRECTION

MENU

Move Exit

MENU

Select

LANGUAGE: ENGLISH

DEMO

B

Escape to

Basic Menu

Move Exit

MENU

B

Select

VIDEO MODE : VIVID

PICTURE :

AUDIO : SRS

ADVANCED MENU

Move Exit

MENU

Select

Using Your Menus (continued)

19

MODE

Customized picture

viewing

PICTURE

Picture contrast

BRIGHTNESS

Picture adjustment

COLOR

Color saturation

HUE

Color tones

SHARPNESS

Picture detail

TRINITONE

White intensity

adjustment

COLOR CORRECT

Color ratio adjustment

VIVID: Select for enhanced picture contrast and sharpness.

SPORTS: Select for a bright picture.

MOVIE: Select for a finely detailed picture.

STANDARD: Select to receive a standard picture.

Press the PICTURE MODE button to access one of the above settings directly.

Adjust left to decrease picture contrast and soften the color.

Adjust right to increase picture contrast and create more vivid color.

Adjust left to darken the picture.

Adjust right to brighten the picture.

Adjust left to decrease color intensity or saturation.

Adjust right to increase color intensity or saturation.

Adjust left to increase the red tones.

Adjust right to decrease the red tones.

Adjust left to soften the picture detail.

Adjust right to sharpen the picture detail.

HIGH: Gives the white colors a blue tint.

MEDIUM: Gives the white colors a neutral tint.

NTSC STD: Gives the white colors a red tint.

ON: Emphasizes reds and blues.

OFF: Emphasizes greens.

Using the VIDEO

menu

VIDEO

MODE : VIVID

PICTURE

BRIGHTNESS

COLOR

HUE

SHARPNESS

Move Exit

MENU

Select

TRINITONE: HIGH

COLOR CORRECT: OFF

MENU

B

To select the VIDEO

menu:

MENU

Display Highlight Select

Adjustment

bars

}

19

Listening to Sound from a

Main/PIP Picture

If you want to listen to the sound from the

main or window picture through your

headphones, select the audio source.

1

Press to display a window picture.

2

Press

.

The 2 display and channel number

appears for about three seconds.

Press again to switch the audio to the

window picture.

Notes

• Exiting from PIP will return the sound to

the main picture.

• The audio to the headphones will be

automatically turned off when the TV is

powered off.

Coverage Area of the

Infrared Rays

This diagram illustrates the approximate

area covered by the infrared rays emitted

from the transmitter.

Notes

• If you use the headphones too far from

the TV, you may hear a hissing noise.

• If something is between the headphones

and the TV, the sound may be

interrupted. These problems are inherent

to IR communication and do not reflect a

problem with the TV.

MENU

GUIDE

VOL

TV/SAT

CH

SWAP

MODE

PICTURE

PIP

Main Picture audio

Window Picture audio

Headphones off

Approx. 6m (19.7ft)

— 10 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

22

Using the SET UP

menu

SET UP

CHANNEL SET UP

CAPTION VISION: CC1

PARENTAL CONTROL

VIDEO LABEL

TILT CORRECTION

MENU

Move Exit

MENU

Select

LANGUAGE: ENGLISH

DEMO

B

To select the SET UP

menu:

MENU

Display Highlight Select

Note

The FAVORITE CHANNEL feature is not

available for the AUX input.

CHANNEL

SET UP

PARENTAL

CONTROL

VIDEO LABEL

Label connected

equipment for easy

recognition

CAPTION

VISION

Closed Captioning

and channel

information

LANGUAGE

TILT

CORRECTION

DEMO

The CHANNEL SET UP menu is a submenu which provides further options for

setting up your TV. (see page 23)

The PARENTAL CONTROL feature provides parents several options for

programming the TV to block shows based on their rating. (see pages 25-28).

With the VIDEO LABEL window open:

1 Press V or v to access the input you want to label and

press

.

2 Press V or v to choose the label and press

.

VIDEO LABEL Options:

VIDEO 1/2/3: VHS, 8mm, BETA, LD, GAME, SAT, DVD, WEB,

RECEIVER, DTV, SKIP

VIDEO 4: DVD, DTV, SKIP

If you select SKIP, your TV will skip this connection when you press the TV/VIDEO

button.

CC1, 2, 3 or 4: Displays a printed version of the dialog or sound effects of a

program, (the mode should be set to CC1 for most programs).

TEXT1, 2, 3 or 4: Displays network/station information presented using either half

or the whole screen.

XDS (Extended Data Service): Displays network name, program name, program

length, and time of the show if the broadcaster offers this service.

Select from available languages to display all menus in your language of choice.

Press V or v to correct any tilt of the picture between +5 and –5 and press

.

Select to run a demonstration of on-screen menus.

Move Exit

MENU

Select

VIDEO LABEL

MENU

VIDEO 1 : VHS

VIDEO 2 : GAME

VIDEO 4 : VIDEO 4

VIDEO 3 : VIDEO 3

Using Your Menus (continued)

23

FAVORITE

CHANNEL

Quick access to

favorite channels

CABLE

CHANNEL FIX

Useful when you

have a cable box or

satellite receiver

connected

AUTO PROGRAM

Using the CHANNEL SET UP

menu

CHANNEL SET UP

CABLE: ON

CHANNEL FIX: OFF

AUTO PROGRAM

CHANNEL SKIP/ADD

CHANNEL CAPTION

MENU

Move Exit

MENU

Select

FAVORITE CHANNEL

To select the CHANNEL SET UP

menu:

MENU

Display Highlight Select

Note

Your remote control can be programmed to

operate your cable box. (see page 31)

Setting FAVORITE CHANNEL:

1 Press

and then V or v to select AUTO or MANUAL.

(Selecting AUTO will display the last five channels chosen

with the remote control's 0-9 buttons.)

2 Press V or v to move the cursor to 1, 2, 3, 4 or 5 and

press

.

3 Press V or v to access the desired channel and press

.

To preview your favorite channels in the window picture, set PREVIEW to ON.

Using FAVORITE CHANNEL:

1 Exit all menus and press

, your FAVORITE CHANNEL

options will appear.

2 Press V or v to access the channel you want to watch,

and press

.

For KV-27FV15, 32FV15, 36FV15 only

If PREVIEW is set to ON, a window picture displays your favorite channels as you

cycle through the options.

ON: Select if you are receiving cable channels with a CATV cable.

OFF: Select if you are using an antenna.

You will need to run AUTO PROGRAM after changing your CABLE settings.

2-6: Select when you want to control all channel selection through a cable box.

Select the appropriate channel number (usually 3 or 4) and use the cable box’s

remote control for selection.

AUX 2-6: Select when a cable box is connected to the AUX input, (see page 4).

Press the AUX button to alternate between.

VIDEO: Select from available video inputs when you have video equipment

connected (e.g. satellite receiver) and you want your TV fixed to it.

Instructs the TV to program all receivable channels.

Move Exit

MENU

Select

FAVORITE CHANNEL

MENU

MODE : AUTO

3. 4

4. 3

2. 5

1. 6

5. 2

PREVIEW : ON

Exit

FAVORITES

125 ESPN

14 ABC

48 CBS

16 NBC

5 CBC

20

Using the AUDIO

menu

AUDIO

TREBLE

BASS

BALANCE

AUTO VOLUME : OFF

MTS : STEREO

SPEAKER : ON

AUDIO OUT : VARIABLE

MENU

Move Exit

MENU

Select

B

EFFECT : OFF

To select the AUDIO

menu:

MENU

Display Highlight Select

Tips z

• Press

to cycle through your AUDIO options.

• Press MTS/SAP on your remote control to cycle

through the MTS options.

Adjustment

bars

}

TREBLE

BASS

BALANCE

AUTO VOLUME

Stabilizes volume

EFFECT

Enhanced audio

MTS

Multi-Channel sound

SPEAKER

Custom selection

of audio output

source

AUDIO OUT

Use to control the

TV's volume through

a stereo

Adjust left or right to decrease or increase higher pitched sound.

Adjust left or right to decrease or increase low pitched sounds.

Adjust left or right to emphasize left and right speaker balance.

(KV-27FV15, 32FV15, 36FV15 only)

ON: Select to stabilize the volume.

OFF: Select to turn AUTO VOLUME off.

SIMULATED: Adds a surround-like effect to mono programs.

SRS: Produces a dynamic three dimensional sound for stereo signals.

OFF: Normal stereo or mono reception.

MONO: Select to reduce noise in areas with poor reception.

SAP:

Select to listen to bilingual broadcast or other Second Audio Programs (SAP).

STEREO: Select when viewing a broadcast in stereo.

ON: Select to listen to the sound from the TV speakers with or without a

separate stereo system.

OFF: Select to turn off the TV speakers and listen to the TV's sound only through

external audio system speakers.

AUDIO OUT can only be set when SPEAKER is set to OFF.

VARIABLE: Adjust the volume through your TV

.

FIXED: Adjust the TV volume through a connected stereo

.

Using Your Menus (continued)

21

Using the TIMER

menu

TIMER

– – –

– –:– – AM

CURRENT TIME SET

ON/OFF TIMER

DAYLIGHT SAVING: NO

MENU

Move Exit

MENU

Select

B

To select the TIMER

menu:

MENU

Display Highlight Select

Tip

z

Set DAYLIGHT SAVING before setting the clock.

DAYLIGHT

SAVING

CURRENT

TIME SET

Necessary for the

ON/OFF TIMER

ON/OFF TIMER

Wake up or

scheduled viewing

YES: Select to compensate for Daylight Saving Time.

NO: Select at the end of Daylight Saving Time.

With the CURRENT TIME SET menu open:

1 Press

.

2 Press V or v until the current day is displayed.

Press

to select.

3 Press V or v until the current hour and AM/PM is

displayed. Press

to select

4 Press V or v until the current minute is displayed, and press

.

Any loss of power will cause these settings to be cleared.

CURRENT TIME SET must be programmed before you

can use the ON/OFF TIMER.

With the ON/OFF TIMER menu open:

1 Choose the ON/OFF TIMER you would like to set and

press

.

2 Press V or v until the desired day or range of days is

displayed. Press

to select.

3 Indicate the time that you want the TV to turn on

(hour, then minutes) by pressing V or v and then

.

4 Set the time duration (maximum of 6 hours) by pressing V or v and then

.

5 Press V or v until you reach the desired channel. Press

to select.

When you perform AUTO PROGRAM, all ON/OFF TIMER settings will be cleared.

Move Exit

MENU

Select

– – –

– –:– – AM

CURRENT TIME SET

MENU

Move Exit

MENU

Select

– –:– – AM h CH

SUN 12:00 AM

ON/OFF TIMER

MENU

––––––

––––

1.

– –:– – AM h CH

––––––

––––

2.

Select a position

— 11 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

24

CHANNEL

SKIP/ADD

CHANNEL

CAPTION

Label up to 12

channels with their

call letters

With the CHANNEL SKIP/ADD window open:

1 Select the desired channel.

2 Press

to SKIP or ADD (only one option will be available).

With the CHANNEL CAPTION menu open:

1 Press

and then V or v to access the desired channel, and press

again.

2 Press V or v to display the first letter or number of the caption and press

to select it.

3 Press

to activate.

Move Exit

MENU

Select

CHANNEL SKIP/ADD

MENU

SKIP

ADD

33

Use [0-9] or [CH +/-]

to select the channel

Move Exit

MENU

Select

– – – –

CHANNEL CAPTION

MENU

CHANNEL

CAPTION

33

Using Your Menus (continued)

25

TV RATINGS

Block programs by

their rating, content

or both

MOVIE RATINGS

UNRATED

Block programs or

movies that are

broadcast without

a rating

Age based options:

TV-Y: All children.

TV-Y7: Directed to older children.

TV-G: General Audience.

TV-PG: Parental Guidance suggested.

TV-14: Parents Strongly cautioned.

TV-MA: Mature Audience only.

Content based options:

FV: Fantasy Violence.

D: Suggestive Dialogue.

L: Strong Language.

S: Sexual situations.

V: Violence.

(U.S. models only)

G: All children.

TV-PG: Directed to older children.

PG-13: General Audience.

R: Parental Guidance suggested

NC-17: No one under 17 admitted.

X: No one under 17 admitted.

(U.S. models only)

VIEW ALL: Allows all unrated programming.

BLOCK TV: Blocks all unrated TV programs.

BLOCK MOVIE: Blocks all unrated movies.

BLOCK ALL: Blocks all unrated programming.

Overview of the Ratings

The Parental Guideline

Rating System

This table provides a brief overview of the

ratings systems available for the PARENTAL

CONTROL feature.

For detailed information on how to change

your TV rating, see pages 27-28.

Notes

• The content ratings will increase

depending on the level of the age-based

rating. For example, a program with a TV-

PG V (Violence) rating may contain

moderate violence, while a TV-14 V

(Violence) rating may contain more

intense violence.

• If you choose to block unrated TV

programs, please be aware that the

following programs may be blocked:

emergency broadcasts, political programs,

sports, news, public service

announcements, religious programs and

weather.

TV RATINGS

TV-G:

Move Exit

MENU

Select

MENU

TV-Y7: FV:

TV-Y:

TV-MA:

TV-14:

TV-PG: D L S V

Select category

D L S V

L S V

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

MOVIE RATINGS

PG-13:

Move Exit

MENU

Select

MENU

PG:

G:

X:

NC-17:

R:

Select rating

_

_

_

_

_

_

CUSTOM MENU

UNRATED: VIEW ALL

MENU

MOVIE RATINGS

TV RATINGS

Select category

Move Exit

MENU

Select

26

Using Your Menus (continued)

ENGLISH RATINGS

For Canadian programs

that are broadcast in

English

FRENCH RATINGS

For Canadian programs

that are broadcast in

French

U.S.A. RATINGS

For programs from the

United States

(Canadian models only)

C: All children.

C8+: Children 8 years and older.

G: General programming.

PG: Parental Guidance.

14+: Viewers 14 and older.

18+: Adult programming.

(Canadian models only)

G: General programming.

8 ans+: Not recommended for young children.

13 ans+: Not recommended for ages under 13.

16 ans+: Not recommended for ages under 16

18 ans+: Programming restricted to adults.

(Canadian models only)

Please see TV RATINGS on page 25 for information on U.S.A. RATINGS.

Overview of the Ratings

ENGLISH RATINGS

G:

Move Exit

MENU

Select

MENU

C8+:

C:

18+:

14+:

PG:

Select rating

_

_

_

_

_

_

FRENCH RATINGS

8 ans+:

Move Exit

MENU

Select

MENU

G:

18+:

16 ans+:

13 ans+:

Select rating

_

_

_

_

_

27

Using the PARENTAL CONTROL

menu

This section shows you how to access the

PARENTAL CONTROL menu. After you

follow the example below, the next section

shows you how to adjust your TV’s rating.

1

Press MENU and select the SET UP

menu.

MENU

SET UP

CHANNEL SET UP

CAPTION VISION: CC1

PARENTAL CONTROL

VIDEO LABEL

TILT CORRECTION

MENU

Move Exit

MENU

Select

LANGUAGE: ENGLISH

DEMO

B

2

Point the cursor to PARENTAL

CONTROL and press

.

SET UP

CHANNEL SET UP

CAPTION VISION: CC1

PARENTAL CONTROL

VIDEO LABEL

TILT CORRECTION

MENU

Move Exit

MENU

Select

FAVORITE CHANNEL

LANGUAGE: ENGLISH

DEMO

B

You will be asked to enter a 4-digit password

for any future access into the PARENTAL

CONTROL menu.

3

Press and use the 0-9 buttons to enter

your 4-digit password.

1 2 3

4 5 6

7 8

0

9

PARENTAL CONTROL

PASSWORD: _ _ _ _

Use the [0-9] buttons to

enter a new four-digit

password

Move Exit

MENU

Select

MENU

4

Confirm your password by entering it

again.

1 2 3

4 5 6

7 8

0

9

PARENTAL CONTROL

PASSWORD: X X X _

Confirm password

Move Exit

MENU

Select

MENU

Once your password is set correctly, you

will be taken into the PARENTAL

CONTROL menu.

In order to change the RATING you will need

to set PARENTAL LOCK to ON.

5

Point the cursor at PARENTAL LOCK

and press

. Press V or v to ON and

press

.

CHANGE PASSWORD

PARENTAL CONTROL

RATING: CHILD

Move Exit

MENU

Select

MENU

PARENTAL LOCK: ON

See pages 25-26 for an overview of the

Parental Guideline ratings.

Tip z

Keep this instruction manual in a safe place.

In the event that you forget your password,

please see page 33.

— 12 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

30

Laserdisc

code numbers

Manufacturer Code

Sony 701

Panasonic 704, 710

Pioneer 702

Operating a

Laserdisc

To turn on or off

To play

To stop

To pause

To scan

To search the

chapter forward or

backward

Tip z

If you will not be programming a satellite receiver or

cable box into the SAT/CABLE function of your remote,

you can use it to program other video equipment (e.g.

DVD, MDP, or second VCR).

DVD (Digital Versatile Disc)

code numbers

Manufacturer Code

Sony 751

Panasonic 753

Pioneer 752

RCA 755

Toshiba 754

Operating a DVD

player

To turn on or off

To play

To stop

To pause

To scan

To search the

chapter forward or

backward

To select chapters

directly

MENU

To move cursor in

menu

Buttons on the remote

control

Press VTR/DVD (POWER).

Press (.

Press p.

Press P.

To resume normal playback,

press again or press (.

Press ) or 0 during

playback.

To resume normal playback,

press (.

Press CH +/–.

0-9 + ENTER.

Press to display DVD menu.

Use your arrow buttons

V, v, B, b.

Buttons on the remote

control

Press VTR/DVD (POWER).

Press (.

Press p.

Press P.

To resume normal playback,

press again or press (.

Press ) or 0 during

playback.

To resume normal playback,

press (.

Press CH +/–.

Tips z

• In some rare cases, you may not be able to operate

your non-Sony video equipment with the supplied

remote control. In this case, please use the

equipment’s own remote control.

• When you remove the batteries, the code number may

revert to the factory setting.

• The code numbers for Sony VCRs are assigned at the

factory as follows:

VHS VCR 301

(preset code for the

supplied remote control)

8 mm VCR 302

Beta, ED Beta VCRs 303

Operating Video Equipment (continued)

31

Manufacturer

Hamlin/Regal

Jerrold/G. I.

Oak

Panasonic

Pioneer

Scientific Atlanta

Tocom

Zenith

Programming the remote

control

You can program the supplied remote

control to operate a cable box or satellite

receiver.

1

Press CODE SET.

2

Press SAT/CABLE (FUNCTION).

3

Use the 0-9 buttons to key in the

manufacturer's code number from the

following chart.

4

Press ENTER.

For more details on operating the

cable box or satellite receiver

Refer to the operating instructions that were

supplied with the equipment.

If the remote control doesn’t work

First, try repeating the setup procedures

using the other codes listed for your

equipment.

Tips z

• If more than one code number is listed, try

entering them one by one until you come to the

correct code for your equipment.

• If you enter a new code number, the code number

you previously entered at that setting is erased.

• In some rare cases, you may not be able to operate

your equipment with the supplied remote control.

In this case, use the equipment’s supplied remote

control.

• Whenever you remove the batteries the code

numbers may revert to the factory setting.

Cable box code numbers

Code

222, 223, 224, 225, 226

201, 202, 203, 204, 205, 206,

207, 208, 218

227, 228, 229

219, 220, 221

214, 215

209, 210, 211

216, 217

212, 213

Satellite receiver code numbers

Manufacturer

Sony

General Electric

Hitachi

Hughes

Panasonic

RCA/PROSCAN

Toshiba

Code

801 (preset code for

remote control)

802

805

804

803

802, 808

806, 807

Operating a Cable Box or Satellite Receiver

28

PARENTAL LOCK

Turns ratings on/off

RATING

CHANGE

PASSWORD

Setting the TV’s RATING

This section provides information on how to

set the TV’s RATING and how to change

your password.

Note

Entering your password to view a blocked

program will temporarily turn PARENTAL

LOCK to OFF. To reactivate your

PARENTAL CONTROL settings, turn the TV

off then back on; the TV will restore your

rating settings.

ON: Select to activate the RATING.

OFF: Turns off current ratings.

If you are not familiar with the Parental Guideline rating system, you should use

one of the following preselected categories to help simplify the rating selection.

The following maximum ratings will be allowed:

CHILD: TV-Y, TV-G, G (U.S. models only),

TV-Y, G (Canadian models only).

YOUTH: TV-PG, PG (U.S. models only),

TV-PG, PG, 8 ans+ (Canadian models only).

YOUNG ADULT: TV-14, PG-13 (U.S. models only),

TV-14, 14+, 13 ans+ (Canadian models only).

CUSTOM: If you prefer to set more restrictive ratings, highlight CUSTOM and

press

. See pages 25-26, for an overview of the rating systems available.

In the CUSTOM RATINGS menu:

1 Select the desired rating category and press

.

2 Press V or v to select the maximum rating or content and press

.

3 Press V or v to block or unblock the rating or content and press

.

Once you have blocked a rating or content, all higher ratings or contents will be

automatically blocked.

To view a blocked program:

Press ENTER on the remote control, then use the 0-9 buttons to enter your

password.

To reset your password:

1 Move the cursor to CHANGE PASSWORD press

.

2 Use the 0-9 buttons to create a new password, enter again to confirm.

In the event that you forget your password, see page 33.

CHANGE PASSWORD

PARENTAL CONTROL

RATING: CHILD

Move Exit

MENU

Select

MENU

PARENTAL LOCK: ON

CHANGE PASSWORD

PARENTAL CONTROL

RATING: CHILD

Move Exit

MENU

Select

MENU

PARENTAL LOCK: ON

Using Your Menus (continued)

29

Programming the remote

You can use the supplied remote control to

operate Sony or non-Sony video equipment.

Operating Video Equipment

1

Press CODE SET.

2

Press VTR/DVD (FUNCTION).

3

Use the 0-9 buttons to key in the

manufacturer's code number from the

following chart.

4

Press ENTER.

VCR code numbers

Manufacturer Code

Sony 301, 302, 303

Admiral (M. Ward) 327

Aiwa 338, 344

Audio Dynamic 314, 337

Broksonic 319, 317

Canon 309, 308

Citizen 332

Craig 302, 332

Criterion 315

Curtis Mathes 304, 338, 309

Daewoo 341, 312, 309

DBX 314, 336, 337

Dimensia 304

Emerson 319, 320, 316, 317, 318, 341

Fisher 330, 335

Funai 338

General Electric 329, 304, 309

Go Video 322, 339, 340

Goldstar 332

Hitachi 306, 304, 305,338

Instant Replay 309, 308

JC Penney 309, 305, 304, 330, 314, 336, 337

JVC 314, 336, 337, 345, 346, 347

Kenwood 314, 336, 332, 337

LXI (Sears) 332, 305, 330, 335, 338

Magnavox 308, 309, 310

Marantz 314, 336, 337

Marta 332

Memorex 309, 335

Minolta 305, 304

Mitsubishi/MGA 323, 324, 325, 326

Multitech 325, 338, 321

NEC 314, 336, 337

Olympic 309, 308

Optimus 327

Panasonic 308, 309, 306, 307

Pentax 305, 304

Philco 308, 309

Philips 308, 309, 310

Pioneer 308

Quasar 308, 309, 306

RCA/PROSCAN 304, 305, 308, 309, 311,

312, 313, 310, 329

Realistic 309, 330, 328, 335, 324, 338

Sansui 314

Samsung 322, 313, 321

Sanyo 330, 335

Scott 312, 313, 321, 335, 323, 324, 325, 326

Sharp 327, 328

Shintom 315

Signature 2000 (M. Ward) 338, 327

SV2000 338

Sylvania 308, 309, 338, 310

Symphonic 338

Tashiro 332

Tatung 314, 336, 337

Teac 314. 336, 338, 337

Technics 309, 308

Toshiba 312, 311

Wards 327, 328, 335, 331, 332

Yamaha 314, 330, 336, 337

Zenith 331

Operating a VCR

To turn on or off

To select a

channel directly

To change

channels

To record

To play

To stop

To fast forward

To rewind the tape

To pause

To scan

To change input

mode

Buttons on the

remote control

Press VTR/DVD (POWER).

Press the 0-9 buttons.

Press CH +/–.

Press ( and r

simultaneously.

Press (.

Press p.

Press ).

Press 0.

Press P.

To resume normal playback,

press again or press (.

Press ) or 0 during

playback.

To resume normal playback,

release the button.

Press TV/VTR.

— 13 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

32

You want to restore the TV's

factory settings

A red light keeps flashing on the

TV for more than a few seconds

TV makes a noise when turned on

Screen is not lit and there is no

sound

Poor or no picture (screen lit),

good sound

Good picture, no sound

No color

Only snow and noise appear on

the screen

• Your TV may need service.

• This is a normal function of your TV.

• Power cord may not be plugged in.

•

Remote control batteries may not be inserted correctly.

• TV/VIDEO setting may be incorrect.

• Current program may exceed PARENTAL

CONTROL settings.

•

VIDEO menu settings may not be adjusted correctly.

• Antenna/cable connections may be faulty.

• VIDEO LABEL inputs may be set to WEB. (This

label darkens the screen for ideal WebTV viewing)

• Sound may be set to MUTING.

• Your TV may be set to SAP.

• SPEAKER may not be set correctly.

• Color settings may not be adjusted correctly.

•

CABLE may not be set correctly in the CHANNEL

SET UP menu.

• Antenna/cable connections may not be correct.

• TV may be set to AUX mode.

• First, turn the TV on. Then while pressing the RESET

button on the remote control, press the POWER button

on the TV. The TV will turn itself off and then back on.

When the TV turns on again, all settings will be reset, and

the initial setup screen will appear.

• Call your local Sony service center.

• Check your power cord.

• Re-insert the batteries in your remote control.

• Press TV/VIDEO until you receive a channel.

• Check your PARENTAL CONTROL settings, (page 28).

• Readjust your VIDEO menu settings, (page 19).

• Check your VIDEO LABEL settings, (page 22).

• Press MUTING.

• Check the MTS setting in the AUDIO menu, (page 20).

• Check your SPEAKER settings, (page 20).

•

Adjust the COLOR settings in the VIDEO menu, (page 19).

• Ensure that you have selected the correct CABLE mode in

the CHANNEL SET UP menu, (page 23).

• Press ANT on your remote control to change the input

mode, (page 15).

Problem What it could be What you can do

Troubleshooting

Consult the table below; it suggests solutions to specific problems.

33

• CABLE setting may not be correct

in the CHANNEL SET UP menu.

• CABLE setting may not be correct

in the CHANNEL SET UP menu.

• Volume may not be adjusted on

your cable box.

• CHANNEL FIX settings may not

be correct.

Problem What it could be What you can do

Supplied accessories

Remote control RM-Y168 (KV-32FS10,

36FS10 only), RM-Y171 (KV-27FV15,

32FV15, 36FV15 only)(1)

Batteries size AA (R6) (2)

Optional accessories

Connecting cables

RK-74A, RK-G69HG, VMC-10HG,

VMC-720M, VMC-810S/820S, YC-15V/

30V

TV Stand SU-27FD2, SU-32FD2, SU-36FD2

U/V mixer EAC-66

Specifications

If, after reading these operating instructions, you have additional questions related to the use of your

Sony television, please call our Direct Response Center at 1-800-222-SONY (7669)(U.S. residents only)

or (416) 499-SONY (7669)(Canadian residents only).

•

Ensure that CABLE is set to OFF

in the CHANNEL SET UP menu,

(page 23).

•

Use AUTO PROGRAM to add

receivable channels that are not

presently in TV memory, (page 23).

•

Ensure that CABLE is set to OFF

in the CHANNEL SET UP menu,

(page 23).

•

Use AUTO PROGRAM to add

receivable channels that are not

presently in TV memory, (page 23).

• Use the remote control supplied

with the cable box.

• Check your CHANNEL FIX

settings, (page 23).

• In the password screen, enter the

following master password: 4357.

The master password cannot

be used to unlock currently

blocked channels.

Cannot receive upper

channels (UHF) when

using an antenna

Cannot receive any

channels when using

cable

Cannot gain enough

volume when using a

cable box

TV is fixed to one

channel

Lost password for

PARENTAL

CONTROL

— 14 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

SECTION 2

DISASSEMBLY

2-1. REAR COVER REMOV AL

2-2. CHASSIS ASSEMBLY REMOVAL

7 7

7 7

7 AK Board

99

99

9 HA Board

4 4

4 4

4 G/GA Board

3 3

3 3

3 A Board

5 5

5 5

5 Chassis Assembly

6 6

6 6

6 UX/UY Board

2 2

2 2

2 HB Board

1 1

1 1

1 Claw

1 1

1 1

1 Nine Screws

(BVTP 4x16)

22

22

2 Two Screws

(BVTP 3x12)

33

33

3 One Screw

(BVTP 4x20)

8 8

8 8

8 T Board

(KV-32FS10/32FV15/32XBR250/34FV10

34FV15/34FV15C/34FX250C/34FV15K/34FV15T)

(KV-36FS10/36FV15/36XBR250

38FX250/38FX250C/38FX250T/38FV15K)

11

11

1

Eleven Screws

(BVTP 4x16)

33

33

3 One Screw

(BVTP 4x20)

2 2

2 2

2 Four Screws

(BVTP 3x12)

— 15 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

2-4. MULTI-BUTT ON SWITCH REMOVAL

2-3. SERVICE POSITION

1 1

1 1

1 Top Multi-Button Switch

1 1

1 1

1 A Board

3 3

3 3

3 G/GA Board

2 2

2 2

2 AK Board

2 2

2 2

2 Two Screws

(+BVTP 4x16)

3 3

3 3

3 Bottom Multi-Button Switch

— 16 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

2-5. PICTURE TUBE REMOVAL

Coated earth ground strap

Do not use sharp objects which may cause damage to the sur-

face of the anode-cap.

Do not squeeze the rubber covering too hard to avoid damaging

the anode-cap. A material fitting called a shatter-hook terminal is

built into the rubber.

Do not force turn the foot of the rubber cover. This may cause

the shatter-hook terminal to protrude and damage the rubber.

HOW TO HANDLE AN ANODE-CAP

Turn up one side of the rubber cap in

the direction indicated by arrow .

When one side of the rubber cap sepa-

rates from the anode button, the anode-

cap can be removed by turning the rub-

ber cap and pulling it in the direction of

arrow .

Use your thumb to pull the rubber cap

firmly in the direction indicated by

arrow .

ANODE-CAP REMOV AL

WARNING: High voltage remains in the CRT even after the power is disconnected. To avoid electrical shock, discharge CRT before

attempting to remove the anode-cap. Short between anode and coated earth ground strap of CRT.

NOTE: After removing the anode, short circuit the anode of the picture tube and the anode cap to either the metal chassis, CRT

shield, or carbon painted on the CRT.

REMOVAL PROCEDURES

WARNING -- Before removing

anode-cap:

High voltage remains in the CRT even

after the power is disconnected.

To avoid electrical shock, discharge CRT

before attempting to remove the anode-

cap. Short between anode and coated

earth ground strap of CRT.

Four screws

(Tapping screw 7)

Chassis

G/GA board

A board

AK board

Anode-cap

Cushion

Deflection yoke

Neck assy

UX/UY board

Picture tube

C board

— 17 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

SECTION 3

SET-UP ADJUSTMENTS

The following adjustments should be made when a

complete realignment is required or a new picture

tube is installed.

These adjustments should be performed with rated

power supply voltage unless otherwise noted.

The controls and switch should be set as follows

unless otherwise noted:

PICTURE control ................. normal

BRIGHTNESS control ......... normal

3-1. BEAM LANDING

Preparation:

1. Input white pattern from pattern generator.

2. Loosen the deflection yoke mounting screw, and set

the purity control to the center as shown below:

3. Input green pattern from pattern generator.

4. Move the deflection yoke backward, and adjust with

the purity control so that green is in the center and

red and blue are even on both sides.

BR

G

Perform the adjustments in order as follows:

1. Beam Landing

2. Convergence

3. Focus

4. Screen (G2)/White Balance

Note: Test Equipment Required:

1. Color Bar Pattern Generator

2. Degausser

3. DC Power Supply

4. Digital Multimeter

5. Oscilloscope

6. CR T Analyzer

5. Move the deflection yoke forward, and adjust so that

the entire screen becomes green.

6. Switch over the raster signal to red and blue and

confirm the condition.

7.

When the position of the deflection yoke is determined,

tighten it with the deflection yoke mounting screw.

8. When landing at the corner is not right, adjust by using

the disk magnets.

ab

cd

d

a

c

Purity control

corrects this area.

Disk magnets or

rotatable disk

magnets correct

these areas(a-d).

Deflection yoke positioning

corrects these areas.

b

• Input a white pattern signal.

• Face the picture tube in an East or West direction to reduce the influence of geomagnetism.

NOTE: Do not use the hand degausser because it magnetizes the CRT .

— 18 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

3-2. CONVERGENCE

( 1 ) Vertical and Horizontal Static Convergence

1. Adjust V. STAT magnet to converge red, green and blue

dots in the center of the screen. (Vertical movement)

B

G

R

V.STAT

Magnet

Center dot

Tilt the V. STAT magnet and adjust static convergence

to open or close the V. STAT magnet.

2. When the V. STAT magnet is moved in the direction of

arrow a and b, red, green, and blue dots move as

shown below:

B

R

G

B

R

G

RG B

G

R

B

G

B

R

BG R

1

2

3

a

b

a

b

b

b

a

a

b

b

a

b

a

b

Operation of BMC (Hexapole) Magnet

The respective dot positions resulting from moving each

magnet interact, so perform adjustment while tracking.

Use the VSTAT tabs to adjust the red, green, and blue dots

so they line up at the center of the screen (move the dots in

a horizontal direction.)

RG B

RGB

RGB

RGB

R

G

B R

G

B

Y Separation Axis Correction Magnet Adjustment

1. Input cross-hatch pattern, adjust PICTURE to

minimum and BRIGHTNESS to normal.

2. Adjust the deflection yoke upright so it touches the

CRT.

3. Adjust so that the Y separation axis correction magnet

on the neck assembly is symmetrical from top to

bottom (open state).

Purity

V. STAT

BMC (Hexapole)

4. Return the deflection yoke to its original position.

Preparation:

• Before starting, perform FOCUS, V. LIN and V. SIZE adjustments.

• Set BRIGHTNESS control to minimum.

• Input dot pattern.

— 19 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

( 2 ) Dynamic Convergence Adjustment

• Before starting, perform Horizontal and Vertical

Static Convergence Adjustment.

1. Slightly loosen deflection yoke screw.

2. Remove deflection yoke spacers.

3. Move the deflection yoke for best convergence as

shown below:

BGR

B

G

R

B

G

R

RGB RGB

RGB

RGB

BGR

RGB

R

G

B

R

G

B

BGR

4. Tighten the deflection yoke screw.

5. Install the deflection yoke spacers.

(3) Screen-corner Convergence

Affix a permalloy assembly corresponding to the

misconverged areas:

( 4 ) TLH Plate Adjustment

• Input crosshatch pattern

• Adjust PICTURE QUALITY to standard, PICTURE and

BRIGHTNESS to 50%, and OTHER to standard.

• Adjust the Horizontal Convergence of red and blue dots

by tilting the TLH plate on the deflection yoke.

1. Adjust XCV core to balance X axis.

2. Adjust YCH VR to balance Y axis.

3. Adjust vertical red and blue convergence with V.TILT

(TLV VR.)

Perform adjustments while tracking items 1 and 2.

(5 ) H Center SW Adjustment

• Before adjusting H Center SW (S501, S502), make sure

that HPOS data is "7".

TLH Plate

YCH

RV1750

V.STAT

XCV

C Board

TLV

(TLV)

B R R B

(R)(B) (B)(R)

TLH+

TLH-

ab

cd

b

a

d

c

a-d : screen-corner

misconvergence

— 20 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

7. Adjust screen VR until the screen is just cut off, or

scarcely lights up. A signal cannot be seen when the

brightness of the raster is high.

8. Push the JUMP again to release the cut off.

3-5. WHITE BALANCE ADJUSTMENTS

NO. Disp. Item All Models

24 RDRV Red Drive 31

25 GDRV Green Drive 31

26 BDRV Blue Drive 31

27 RCUT Red Cut-off 7

28 GCUT Green Cut-off 7

29 BCUT Blue Cut-off 7

38 SBRT Sub Bright 7

1. Set program palette to "STANDARD" and push

"RESET.

2. Input an entire white signal.

3. Set to Service adjustment Mode.

4. Set the PICTURE and BRIGHT to minimum.

5. Adjust with SBRT if necessary.

6. Set RCUT to "14".

7. Select GCUT and BCUT with 1 and 4.

8. Adjust with 3 and 6 for the best white balance.

9. Set the PICTURE and BRIGHT to maximum.

10. Select GDRV and BDRV with 1 and 4.

11. Adjust with 3 and 6 for the best white balance.

12. Write into the memory by pressing then

**.

NOTE:

White Balance should be adjusted after Sub Contrast

because RDRV is also used in Sub Contrast adjustment.

(See page 29)

3-3. FOCUS

1. Input Monoscope signal.

2. Set user controls to normal.

3. Set Video mode to STANDARD.

4. Set the PICTURE to maximum.

5. Adjust FOCUS control for best picture at center

circle.

6. Then receive an entire white signal. Make sure

Magenta Ring is at acceptable level

3-4. SCREEN (G2)

1. Input signal from the pattern generator.

2. Set the user controls to NORMAL.

3. Attach the G2-Jig to the C Board.

4. Adjust RCUT, GCUT, BCUT, and SBRT in service

mode with an oscilloscope so that voltages on the

red, green, and blue cathodes are 170 + 2 V DC.

5. Observe the screen and adjust SCREEN (G2) VR to

obtain the fairly visible background of dot signal.

6. Push the TEST +JUMP (+ Channel) to cut off the

signal, then the screen is bright or dark. Brightness

of raster must be increased when adjusting.

325 MARK

CENTER

CIRCLE

35 MARK

35

325

NN

NN

pedestal

NN

GND

170 + 2 Vdc

— 21 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

32" Lower than 26.95 + (-0.1) V DC.

At AC input: 120.0 ± 2.0 VAC

36" Lower than 22.05 + (-0.1) V DC.

At AC input: 120.0 ± 2.0 VAC

A BOARD - CONDUCTOR SIDE

Step 5

Confirm that a voltage appears between TP85 and

ground, of more than 23.0 V DC.

At AC input: 120.0 ± 2.0 VAC

A BOARD: IC355, IC501, D302, D519, D520, D521, C531,

C532, Q301, R356, R359, R361, R387, R529,

R530, R531, R532, R533, R550, T503

G BOARD (KV-32FS10, 32FV15, 32XBR250, 36FS10,

36FV15, 36XBR250): IC643, R661

GA BOARD (KV-34FV10, 34FV15, 34FV15C, 34FV15K,

34FV15T, 34FX250C, 38FV15K, 38FX250, 38FX250C,

38FX250T): IC6003, R6088

Step 1 Preparation before Confirmation

Turn the POWER switch ON.

Input a white signal and set the PICTURE and BRIGHT

controls to maximum.

Confirm that, when the set is operating normally, the

voltage at check terminal TP85 is more than 23.0 V DC.

At AC input: 120.0 ± 2.0 VAC

Step 2

Input a white signal and verify that I ABL is within the

specified range:

2062.5 + 100 µA,

+B = 135.5

+ 1 VDC .

At AC input: 120.0 ± 2.0 VAC

+

I ABL

ABL

T503

FBT

range

-

ammeter

3.0 mA DC

A

Step 3

Record the voltage between TP85 and ground.

Step 4

Using an external DC power supply, apply voltage

between TP85 and ground.

Increase the voltage gradually and confirm that the

holdown works (raster disappears) at lower than the

voltage recorded in Step 3.

SECTION 4

SAFETY RELATED ADJUSTMENTS

Always perform the following adjustments when replacing the

following components marked with ] on the schematic diagram:

G BOARD (KV-32FS10, 32FV15, 32XBR250, 36FS10,

36FV15, 36XBR250): IC643, R661

GA BOARD (KV-34FV10, 34FV15, 34FV15C, 34FV15K,

34FV15T, 34FX250C, 38FV15K, 38FX250, 38FX250C,

38FX250T): IC6003, R6088

1) Using Variac, apply AC input voltage: 130.0 ± 2.0 VAC

2) Input a monoscope signal.

3) Set the PICTURE control and the BRIGHT control to

initial reset value.

4a) (G Board Models) Confirm the voltage of G Board

CN641 between pin 1 to ground on "G" PWB is less

than 136.5

+ 1.0 V DC.

4b) (GA Board Models) Confirm the voltage of GA

Board CN6007, between pin 1 to ground on "GA"

PWB is less than 136.5

+ 1.0 V DC.

5a) (G Board Models) If step 4a is not satisfied, replace

R661 and repeat the above steps.

5b) (GA Board Models) If step 4b is not satisfied, replace

R6088 and repeat the above steps.

R530, R531 CONFIRMA TION METHOD (HOLD-DOWN CONFIRMATION) AND READJUSTMENTS

Always perform the following adjustments when replacing the following

components marked with a ] mark on the schematic diagram:

+

-

dejital

multimeter

+

-

A

ammeter

3mA dc ran

ge

+

-

dc power supply

11

R530

R531

T503

FBT

TP85

1T40

T503

FBT

TP85

R531

R530

DC Power Supply

digital multimeter

ammeter

3mA DC range

B+ VOLTAGE CONFIRMATION AND ADJUSTMENT

— 22 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

ELECTRICAL ADJUSTMENT BY REMOTE COMMANDER

NOTE : Test Equipment Required:

1. Pattern Generator

2. Frequency Counter

3. Digital Multimeter

4. Audio OSC

5-1. Method of Setting the Service

Adjustment Mode

SERVICE MODE PROCEDURE

1. Standby mode. (Power off)

2.

on

the Remote Commander.

(Press each button within a second.)

SERVICE ADJUSTMENT MODE IN

3. The CRT displays the item being adjusted.

4. Press

2

or

5

on the Remote Commander to select the device

item.

5. Press

1

or

4

on the Remote Commander to select the item

.

6. Press

3

or

6

on the Remote Commander to change the data

.

7. If you want to recover the latest values press

-

then

to read the memory.

8. Press

then to write into memory**.

NOTE: If the NVM is replaced, perform test and reset, then

download from microprocessor to NVM to prevent loss of picture.

SERVICE ADJUSTMENT MODE MEMORY

Green

9. Press then on the Remote Commander to reset.

SECTION 5

CIRCUIT ADJUSTMENTS

Use Remote Commander (RM-Y149A, RM-Y168, RM-Y170, RM-Y171) to perform the following circuit adjustments:

RM-Y171

10. Turn set off and on to exit.

5.3. Adjust Buttons and Indicator

5-2. Memory Write Confirmation Method

1. After adjustment, pull out the plug from the AC outlet, then

replace the plug in the AC outlet again.

2. Turn the power switch ON and set to Service Mode.

3. Call the adjusted items again to confirm they were adjusted.

**WARNING: Do NOT turn off the power or AC immediately after pressing then . Wait at least 10 seconds.

SERVICE VP VPOS 30

1000 0

Device Item

Register Item

Data Item

SERVICE VP VPOS 30

1000 0

Device Item

Register Item

Data Item

Red

SERVICE WRITE

1000 0000

Carry out step 9) when adjusting

IDs 0 to 4 and when replacing and

adjusting IC102.

Factory original setting

1 2 3

4 5 6

7 8

0

9

CHVOL

CODE SET

RESET MENU

GUIDE

JUMP

SLEEP

CH

–

+

TV/SAT

ENTER

DISPLAYMTS/SAP

TV/VTR

POSITION

FREEZE

AUDIO

SWAP PIP

TV/VIDEO

PICTURE

MODE

TV/VIDEOANT

VTR/DVD

VTR/DVD

POWER

SAT/CABLE

TV

MUTING

TV

SAT/CABLE

FUNCTION

TV

SYSTEM

OFF

RM-Y171

MUTING

(Write into memory)

(Write into memory)

(Read out of memory)

DISPLAY

(Service mode)

(Service mode)

(Device item down)

(Data up)

(Data down)

(Item up)

(Item down)

(Initialize)

(Service mode)

(Device item up)

ENTER

VOL (+)

POWER

1

4

2

3

6

5

0

8

— 23 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

5-4. Service Data

No.

Register

Description Data Adj/Fix Initial Average Comments

Name

Range Data Data**

All Models

VP CXA2131S

1

HPOS Horizontal Position Adjust 0-31 Fix 7 7

2

HSIZ Horizontal Amp Adjust 0-31 Fix 10 10

3

VBOW VRT Line Bowing Adjust 0-15 Fix 6 6

4

VANG VRT Line Bow Slant Adjust 0-15 Fix 5 5

5

TRAP Horizontal Trapezoid Adjust 0-15 Fix 6 6

6

PAMP Horizontal Pin Distort Adjust 0-63 Fix 3 2 32

7

UCPN Upper Pin 0-63 Fix 3 6 36

8

LCPN Lower Pin 0-63 Fix 36 36

9

VSIZ Vertical Amplitude Adjust 0-63 Fix 0 0

10

VPOS Vertical Position Adjust 0-63 Fix 3 1 31

11

VLIN Vertical Linearity Adjust 0-15 Fix 7 7

12

VSCO S-Correction 0-15 Fix 7 7

13

VZOM 16:9 CRT Z Mode On/Off 0,1 Fix 0 0

14

EHT VRT High Volt Correction 0-15 Fix 4 4

15

ASP Aspect Ratio Control 0-63 Fix 47 47

16

SCRL 16:9 CRT Z Mode Tran Scroll 0-63 Fix 31 31

17

HBSW HBLK SW 0,1 Fix 1 1

18

LBLK Left Screen H Blk Control 0-15 Fix 1 5 15

19

RBLK Right Screen H Blk Control 0-15 Fix 0 0

20

HDW H Drive Pulse Width 0,1 Fix 1 1

21

EWDC EW/DC Adjust 0,1 Fix 0 0

22

LVLN Screen Bottom VRT Lin Adjust 0-15 Fix 0 0

23

UVLN Screen Top VRT Lin Adjust 0-15 Fix 0 0

24

RDRV R Output Drive Control 0-63 Adj 31 31

25

GDRV G Output Drive Control 0-63 Adj 31 31

26

BDRV B Output Drive Control 0-63 Adj 31 31

27

RCUT R Output Cutoff Control 0-15 Adj 7 7

28

GCUT G Output Cutoff Control 0-15 Adj 7 7

29

BCUT B Output Cutoff Control 0-15 Adj 7 7

30

RDR4 Video 4 R Output Drive Control 0-63 Adj 31 31

31

GDR4 Video 4 G Output Drive Control 0-63 Adj 31 31

32

BDR4 Video 4 B Output Drive Control 0-63 Adj 31 31

33

RCU4 Video 4 R Output Cutoff Control 0-15 Adj 7 7

34

GCU4 Video 4 G Output Cutoff Control 0-15 Adj 7 7

35

BCU4 Video 4 B Output Cutoff Control 0-15 Adj 7 7

36

SHUE Sub Hue 0-31 Adj 15 15

37

SCOL Sub Color 0-31 Adj 15 15

38

SBRT Sub Brightness 0-63 Fix 15 15

39

RON R Output On/Off 0,1 Fix 1 1

40

GON G Output On/Off 0,1 Fix 1 1

41

BON B Output On/Off 0,1 Fix 1 1

42

AXPL Axis Pal 0,1 Fix 0 0

43

CBPF Chroma BPF On/Off 0,1 Fix 1 1

44

COFF Color On/Off 0,1 Fix 0 0

45

KOFF Set Color Killer 0,1 Fix 0 0

46

SSHP Sub Sharpness 0-15 Fix 7 7

47

SHPF Sharpness Circuit F0 0,1 Fix 1 1

48

PREL Pre/Over-Shoot Switching 0,1 Fix 1 1

49

Y-DC DC Trans Ratio Switching 0,1 Fix 1 1

50

ABLM ABL Mode Switching 0,1 Fix 1 1

51

YDEL Y Delay Time Control 0-15 Fix 7 7

52

NCOL No Color ID 0,1 Fix 1 1

53

FSC FSC Out On/Off 0,1 Fix 1 1

54

K-ID Killer ID 0,1 Fix 1 1

55

HOSC H VCO Oscillation Frequency 0-15 Fix 7 7

56

VSS V Sync Slice Level 0,1 Fix 0 0

57

HSS H Sync Slice Level 0,1 Fix 0 0

58

HMSK H Mask 0,1 Fix 1 1

59

VTMS Select Signal VTIM Pin 0-3 Fix 0 0

— 24 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

Service Data (cont.)

No. Register Description Data Adj/Fix Initial Average Comments

Name Range Data Data**

All Models

VP CXA2131S

continued

60

AFC AFC Loop Gain 0-3 Fix 0 0

61

FIFR Field Frequency 0-3 Fix 3 3

62

REFP REFP 0,1 Fix 0 0

63

VBSW VBW 0-3 Fix 0 0

64

BKOF Blk Off 0,1 Fix 0 0

65

AGN2 Aging 2 0,1 Fix 0 0

66

YSHU Hue for YUV Models 0-63 Fix 31 31

AP BH3868 (Group G,P - see table on page 28)

67

BBLP BBE Low Pass 0-15 Fix 5 5

68

BBHP BBE High Pass 0-15 Fix 3 3

69

SVOL Sub Volume 0-15 Fix 15 15

70

SBAL Sub Balance 0-15 Fix 7 7

71

SBAS Sub Bass 0-15 Fix 8 8

72

STRE Sub Treble 0-15 Fix 8 8

AP BH3868 (Group I,J,M,R,V - see table on page 28)

67

BBLP BBE Low Pass 0-15 Fix 5 5

68

BBHP BBE High Pass 0-15 Fix 3 3

69

SVOL Sub Volume 0-15 Fix 7 7

70

SBAL Sub Balance 0-15 Fix 7 7

71

SBAS Sub Bass 0-15 Fix 8 8

72

STRE Sub Treble 0-15 Fix 8 8

AP BH3868 (Group H,L,N,O,U,W,X - see table on page 28)

67

BBLP BBE Low Pass 0-15 Fix 5 5

68

BBHP BBE High Pass 0-15 Fix 3 3

69

SVOL Sub Volume 0-15 Fix 7 7

70

SBAL Sub Balance 0-15 Fix 7 7

71

SBAS Sub Bass 0-15 Fix 5 5

72

STRE Sub Treble 0-15 Fix 5 5

AP TDA7467

73

SPCA SRS/Space Attenuation 0-63 Fix 0 0

74

CENA SRS/Center Attenuation 0-63 Fix 0 0

75

INPA Input Attenuation 0-127 Fix 3 3

3D UPD64081

76

HHDS HH Off 0-3 Fix 1 1

77

COUT Gain 1/BPF On 0-3 Fix 3 3

78

YAPS V Comp/Y Eaking On 0-3 Fix 3 3

79

NSDS Adaptive 0-3 Fix 0 0

80

MSS Adaptive 0-3 Fix 0 0

81

DYC Hi Impedence 0-3 Fix 2 2

82

EXAD Ext Ad Selected 0,1 Fix 1 1

83

PECS Standard 0-3 Fix 0 0

84

EXCS Use CSI Just In Case 0-3 Fix 1 1

85

CPP VTB = 1.25VPP 0-3 Fix 0 0

86

HDP H Phase +/- 0 µ sec 0-7 Fix 3 3

87

CDL Y/C Delay +/- 0 µ sec 0-7 Fix 4 4

88

DYCO Y Moving Coring 0-15 Fix 2 2

89

DYGA Y Moving Gain 0-15 Fix 10 10

90

DCCO C Moving Coring 0-15 Fix 2 2

91

DCGA C Moving Gain 0-15 Fix 9 9

92

YNRK Effect Small 0,1 Fix 1 1

93

YNRI Effect Small 0.1 Fix 0 0

94

YNRL Noise Limit 0-3 Fix 1 1

95

CNRK Effect Small 0,1 Fix 1 1

96

CNRI Effect Small 0,1 Fix 0 0

97

CNRL CNR Limit 0-3 Fix 1 1

98

ID1O ID 1 Through 0,1 Fix 0 0

99

ID1W 4:03 0,1 Fix 0 0

100

ID1N Normal 0,1 Fix 0 0

101

CLK Low Fix 0,1 Fix 1 1

102

ST1S Monitor Out 0-3 Fix 0 0

103

ST0S Monitor Out 0-3 Fix 1 1

104

WSC Coring 0-3 Fix 1 1

105

VTRH H Non Standard DET 0-3 Fix 1 1

106

VTRR H Non Standard DET 0-3 Fix 1 1

107

LDSR Frame 0-3 Fix 2 2

108

PWRE PWRE 0,1 Fix 0 0

109

PDRE PDRE 0-7 Fix 4 4

110

PBRE PBRE 0-15 Fix 8 8

111

VAPG V Apacon Gain 0-7 Fix 3 3

112

VAPI V Apacon 0-31 Fix 1 0 10

113

TEST Test 0,1 Fix 0 0

114

YPFT Y Peaking 0-3 Fix 3 3

— 25 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

Service Data (cont.)

No. Register Description Data Adj/Fix Initial Average Comments

Name

Range Data Data**

All Models

3D UPD64081

continued

115

YPFG Y Peaking Gain 0-15 Fix 10 10

116

V1PS Line Comb Dot H 0-3 Fix 2 2

117

VEGS Line Comb Dot V 0-3 Fix 2 2

118

CC3N C Width 0,1 Fix 0 0

119

C0HS C Delay On 0,1 Fix 0 0

120

CLPH Y-Ad Clamp Test 0,1 Fix 0 0

121

SEL2 DC Sensitivity Small 0,1 Fix 0 0

122

SEL1 DY Sensitivity Small 0,1 Fix 0 0

123

YHCO Coring Small 0-3 Fix 1 1

124

YPCO Coring On 0,1 Fix 0 0

125

ED2O Standard 0,1 Fix 1 1

126

OVST Standard 0,1 Fix 0 0

127

CSHD Standard 0,1 Fix 0 0

128

KCTT Standard 0-3 Fix 0 0

129

SHT1 Standard 0,1 Fix 0 0

130

SHT0 Standard 0,1 Fix 0 0

131

VCT Standard 0,1 Fix 0 0

132

OTT Standard 0,1 Fix 0 0

133

CGAT Standard 0,1 Fix 0 0

134

CGGT Standard 0,1 Fix 0 0

135

CGFT Standard 0,1 Fix 0 0

136

CGT Standard 0,1 Fix 0 0

137

HPLL H PLL Fast 0,1 Fix 1 1

138

BPLL Burst PLL Fast 0,1 Fix 0 0

139

FSCF Burst Gain Large 0,1 Fix 0 0

140

PLLF PLL Loop Gain Large 0,1 Fix 1 1

141

KILR Killer Level 0-15 Fix 3 3

142

HSSL H Slice Level 0-15 Fix 12 12

143

VSSL V Slice Level 0-15 Fix 8 8

144

BGPS Start Burst Gate 0-15 Fix 4 4

145

BGPW Width of Burst Gate 0-15 Fix 10 10

146

ADCL ADC Clock 0-3 Fix 3 3

147

ADPD ADC Power Down On 0,1 Fix 1 1

148

ADLT Standard 0,1 Fix 0 0

149

NRZO Check On 0,1 Fix 0 0

150

FSCO Level Check On 0,1 Fix 0 0

151

VTVH Normal 0-3 Fix 0 0

152

TST2 Standard 0,1 Fix 0 0

153

HMEM Use 0,1 Fix 1 1

154

HINV Polarity of Reset 0,1 Fix 1 1

155

HTMG Field Memory Address 0,1 Fix 0 0

156

HCP HH Carrier Phase 0-15 Fix 7 7

157

TST3 Test 0,1 Fix 0 0

158

HHMG HH Moving Gain 0,1 Fix 1 1

159

HHFG HH 0-3 Fix 0 0

160

HHTG Max HH 0-15 Fix 5 5

PI TA1226N

161

SHPR Picture Improvement Sharpness 0-127 Fix 59 59

162

BLAD Picture Improvement Black Area Detect 0-3 Fix 0 0

163

SRTS Picture Improvement SRT Start Pos 0-3 Fix 3 3

164

YNR Picture Improvement YNR 0,1 Fix 1 1

165

GIRE Picture Improvement Gamma Start Point 0-3 Fix 3 3

166

DAC1 Picture Improvement DAC1 0,1 Fix 0 0

167

DAC2 Picture Improvement DAC2 0,1 Fix 0 0

168

GCUR Picture Improvement Gamma Curve 0,1 Fix 0 0

169

BLKC Picture Improvement Black Compensation 0,1 Fix 1 1

170

TEST Picture Improvement Test 0-3 Fix 3 3

171

RS Picture Improvement RS 0-7 Fix 0 0

172

RTC Picture Improvement RTC 0-7 Fix 4 4

— 26 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

Service Data (cont.)

No. Register Description Data Adj/Fix Initial Average Comments

Name

Range Data Data**

All Models

DC CXA2060

173

DCSF Dynamic Convergence DC Shift 0-63 Fix 40 40

174

UYBW Dynamic Convergence Upper YBOW 0-63 Fix 31 31

175

LYBW Dynamic Convergence Lower YBOW 0-63 Fix 3 1 31

176

HAMP Dynamic Convergence H. Amp 0-63 Fix 1 5 15

177

UCBW Dynamic Convergence U. CBOW 0-63 Fix 2 1 21

178

LCBW Dynamic Convergence L. CBOW 0-63 Fix 1 4 14

179

UMBH Dynamic Convergence U. MBH 0-63 Fix 15 15

180

LMBH Dynamic Convergence L. MBH 0-63 Fix 15 15

181

PWM Dynamic Convergence PWM 0-63 Fix 6 3 63

182

HTLT Dynamic Convergence H. Tilt 0-63 Fix 1 1

183

UTLT Dynamic Convergence U. Tilt 0-63 Fix 1 1

184

LTLT Dynamic Convergence L. Tilt 0-63 Fix 1 1

185

HDTY Dynamic Convergence H. Duty 0-3 Fix 3 3

186

TOFF Dynamic Convergence Tilt Off 0,1 Fix 1 1

187

DAC0 Dynamic Convergence DAC0 0-255 Fix 19 2 192

188

DAC1 Dynamic Convergence DAC1 0-255 Fix 7 7

SP SDA9288

189

PYSD P in P (Siemens) YS Delay 0-15 Fix 2 2

190

PIPH P in P (Siemens) H-Position 0-127 Fix 7 8 78

191

PIPV P in P (Siemens) V-Position 0-63 Fix 1 8 18

192

PYDL P i n P (Siemens) Y-Delay 0-7 Fix 0 0

193

PIFX P in P Inset Fixed 0-3 Fix 2 2

194

PPFX P in P Parent Fixed 0-3 Fix 2 2

195

PCLI P in P CLISW 0,1 Fix 1 1

196

PAMS P in P AMSEC 0,1 Fix 0 0

197

PHDL P in P (Siemens) H-Pulse Delay (Inset) 0-15 Fix 1 5 15

198

PMVD P in P (Siemens) V-Pulse Delay (Main) 0-31 Fix 1 1 11

199

PIVD P in P (Siemens) V-Pulse Delay (Inset) 0-31 Fix 1 8 18

200

PCON P i n P (Siemens) Contrast Level (Inset) 0-15 Fix 7 1

201

FRMY P in P (Siemens) Frame Y 0-15 Fix 1 0 10

202

CHRI P in P (Siemens) Chroma Input Polarity 0,1 Fix 0 0

203

CHRO P in P (Siemens) Chroma Output Polarity 0,1 Fix 0 0

204

MAT0 P in P (Siemens) MAT0 0,1 Fix 1 1

205

MAT1 P in P (Siemens) MAT1 0,1 Fix 1 1

206

MAT2 P in P (Siemens) MAT2 0,1 Fix 0 0

207

IPER P in P (Siemens) Pedastel R-Y 0-15 Fix 0 0

208

IPEB P in P (Siemens) Pedastel B-Y 0-15 Fix 0 0

209

PCPS P in P (Siemens) CLP & HSIDEL 0,1 Fix 0 0

210

PCPF P i n P (Siemens) CLP Cycles 0,1 Fix 0 0

211

PSEL P in P (Siemens) SELDOWN 0,1 Fix 1 1

212

PPLL P in P (Siemens) PLL Filter 0-3 Fix 0 0

213

PVNR P in P (Siemens) VSP Pulse Noise Red. 0,1 Fix 0 0

Note: PIP Setting - IC SDA9288

continued

SERVICE MODE ITEM Model Groups

IC (SDA9288)

32V / 34V / 36V / 38V

PHDL (HSI DELAY)

15

PMVD (VSP DELAY)

11

PIVD (VSI DELAY)

18

PCON (CONTRAST) 1

IC CXA2019

214 IDPX 0,1 Fix 0 0

215

ICOL Color 0-63 Fix 3 8 38

216

ISHP Sharpness 0-15 Fix 1 0 10

217

ISCO Sub Chroma Decoder Sub Cont 0-15 Fix 7 7

218

ISCL Sub Chroma Decoder Sub Color 0-15 Fix 12 8

219

ISHU Sub Chroma Decoder Sub Hue 0-15 Fix 7 7

220

ITOT Sub Chroma Decoder Tot On 0,1 Fix 0 0

221

ITRP Sub Chroma Decoder Trap On 0,1 Fix 1 1

222

IAFC AFC 0-3 Fix 1 1

223

ITRA Sub Chroma Decoder CTRAPADJ 0-15 Fix 7 7

224

ICD2 Sub Chroma Decoder CD Mode2 0,1 Fix 1 1

225

ISF0 SHP-F0 0,1 Fix 1 1

226

IYDR Sub Chroma Decoder Y Drive 0-31 Fix 2 4 24

227

IVPE Sub Chroma Decoder V Ped 0-15 Fix 0 0

228

IUPE Sub Chroma Decoder U Ped 0-15 Fix 0 0

229

IRVP Sub Chroma Decoder RV Ped 0-15 Fix 7 7

230

IRUP Sub Chroma Decoder RU Ped 0-15 Fix 4 7

— 27 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

Service Data (cont.)

No.

Register

Description Data Adj/Fix Initial Average Comments

Name Range Data Data**

All Models

IC CXA2019

continued

231

IDCT Sub Chroma Decoder DC Tran 0-7 Fix 6 6

232

IRYD Sub Chroma Decoder RY Drive 0-31 Fix 1 9 19

233

IPRE Sub Chroma Decoder Pre Over 0-3 Fix 1 1

234

IRUD Sub Chroma Decoder RU Drive 0-31 Fix 8 8

235

IRVD Sub Chroma Decoder RV Drive 0-31 Fix 8 8

236

IDLY Sub Chroma Decoder Delay 0-3 Fix 0 0

237

ISCR Sub Chroma Decoder SCP BGR 0-3 Fix 1 1

238

ISCF Sub Chroma Decoder SCP BGF 0-3 Fix 1 1

Note: PIP Setting - IC CXA2019

continued

SERVICE MODE ITEM Model Groups

IC (CXA2019AQ)

32V / 34V / 36V / 38V

ICSL (SUB-COLOR)

8

IVPE (V PEDESTAL)

0

IUPE (U PEDESTAL)

0

IRVP (V PEDESTAL2)

7

IRUP (U PEDESTAL2)

7

IDCT (DC TRAN)

6

DA CXA1315

239

RTCO D/A Converter N-S Correction 0-63 Fix 32 32

240

2COL Color 0-255 Fix 1 20 120

241

4COL Color 0-255 Fix 1 20 120

242

2SHU Sub Hue 0-31 Fix 15 15

243

4SHU Sub Hue 0-31 Fix 15 15

D1 CXD2085

244

XJGL XJGLK 0,1 Fix 0 0

245

LNJ1 LNJ1 0,1 Fix 0 0

CC CXP85856A

246

CRIL CCD CRI Pulse Compare Data Low 0-15 Fix 2 2

247

CFLD CCD Caption Fixed-Field Count 0-15 Fix 5 5

248

CCDI CCD No CCD Interrupt 0-7 Fix 3 3

249

CRIP CCD CRI & Parity Error 0-7 Fix 4 4

250

CRIT CCD CRI Time Constant 0-3 Fix 0 0

251

CSB1 CCD Sync Slice Bias 1 0-3 Fix 3 3

252

CSB2 CCD Sync Slice Bias 2 0-7 Fix 4 4

253

CREP CCD CRI Signal End Position 0-256 Fix 142 142

254

CDSD CCD Data Start Delay 0-31 Fix 8 8

255

CCDS CCD Caption Data Threshold 0-31 Fix 9 9

256

CHMK CCD P8-HMASK 0-63 Fix 42 42

257

CHSY CCD P8-HSYC 0-255 Fix 1 36 136

OP CXP85856A

258

DISP OSD Position 0-63 Adj 1 1

ID MAP

259

ID 0 NVM ID 0 0-255 Fix by model

89

89 See ID map

260

ID 1 NVM ID 1 0-255 Fix by model 55 55 See ID map

261

ID 2 NVM ID 2 0-255 Fix by model 175 175 See ID map

262

ID 3 NVM ID 3 0-255 Fix by model 96 96 See ID map

263

ID 4 NVM ID 4 0-255 Fix by model 203 203 See ID map

264

ID 5 NVM ID 5 0-255 Fix by model

181

181 See ID map

265

ID 6 NVM ID 6 0-255 Fix by model

6

6 See ID map

266

ID 7 NVM ID 7 0-255 Fix by model

9

9 See ID map

— 28 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

(5) Feature ID Map

KV-32FS10

89

89

63

63

47

47

96

112

203

203

177

177

0

0

0

0

KV-32FS10CND

25 63 175 64 251 177 0 0

KV-34FV10

89 63 175 96 203 181 6 0

KV-32FV15

89 63 175 112 203 181 6 0

KV-32FV15CND

25 63 175 64 251 181 6 0

KV-34FV15

25 63 175 64 251 181 6 9

KV-34FX250C

89 63 175 96 203 181 6 9

KV-36XBR250

ID 0 ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7

KV-34FV15C

25

9

63

63

175

175

64

64

251

219

181

181

6

6

0

0

KV-34FV15T

137 63 175 64 219 181 6 0

KV-34FV15K

89 63 175 96 203 181 6 9

KV-32XBR250

89 63 175 112 203 181 6 9

KV-32XBR250CND

KV-36FS10

89

89

63

63

47

47

96

112

203

203

177

177

0

0

0

0

KV-36FS10CND

89 63 175 96 203 181 6 0

KV-36FV15

89 63 175 112 203 181 6 0

KV-36FV15CND

137

63 175 64 219 181 6 0

KV-38FV15K

KV-36XBR250CND

89

25

63

63

175

175

112

64

203

251

181

181

6

6

9

9

KV-38FX250

25 63 175 64 251 181 6 9

KV-38FX250C

9 63 175 64 219 181 6 9

KV-38FX250T

SERVICE IDO 25

Note: Items 1-266 show adjustment order

G

H

I

J

K

L

T

GROUP FEATURES NAME

M

N

P

R

S

U

V

KV-32FS10 (8978(U)/8979(CND))

KV-34FV10 (8980(E))

KV-32FV15 (8973(U)/8974(CND))

KV-34FV15T (10189(WB))

KV-32XBR250 (8969(U)/8970(CND))

KV-34FV15 (8975(E), KV-34FV15C (8977(E))

KV-34FX250C (8972(E))

KV-36XBR250 (8981(U)/8982(CND))

KV-34FV15K (10188(K))

KV-36FS10 (8989(U)/8990(CND))

KV-36FV15 (8987(U)/8988(CND))

KV-38FV15K (10191(K))

KV-38FX250 (8983(E), KV-38FX250C (8986(EW))

KV-38FX250T (10190(WB))

32inchx120Vac

32inchxAUTO

32inchx120VacxPIP

32inchx120VacxPIPxNO V Chip

32inchx120VacxPIPx3D

32inchxAUTOxPIP

32inchxAUTOxPIPx3D

36inchx120VacxPIPx3D

32inchxAUTOxPIPxKOREA

36inchx120Vac

36inchx120VacxPIP

36inchxAUTOxPIP

36inchxAUTOxPIPx3D

36inchx120VacxPIPx3DxNO V Chip

— 29 —

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K

34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K

V1

V2 V3

V4

H. SIZE ADJUSTMENT (HSIZ)

1. Input a monoscope signal.

2. Set to Service Adjustment Mode.

3. Select HSIZ with

and .

4. Adjust with

and for the best Horizontal size.

5. Write into the memory by pressing

then .

H. SIZE

V. SIZE ADJUSTMENT ( VSIZ)

1. Input a monoscope signal.

2. Set to Service Adjustment mode.

3. Select VSIZ with

and .

4. Adjust with

and for the best vertical size.

5. Write into the memory by pressing

then .

V. SIZE

V. POSITION ADJUSTMENT (VPOS)

1.Input a monoscope signal.

2.Set to Service Adjustment Mode.

3.Select VPOS with

and .

4.Adjust with

and for the best vertical center.

5.Write into the memory by pressing

then .

V. POSITION

H. POSITION ADJUSTMENT (HPOS)

HPOS data range is from 0∼15.

1. Input a monoscope signal.

2. Set the Service adjustment Mode.

3. Select HPOS with

and .

4. Adjust with

and for the best horizontal center.

5. Write into the memory by pressing

then .

H. POSITION

SUB BRIGHT ADJUSTMENT (SBRT)

1. Set to Service adjustment Mode.

2. Input a gray scale pattern signal.

3. Set the PICTURE to minimum, and BRIGHT to normal.

4. Select SBRT with

and .

5. Adjust SUB BRIGHT level with

and so that the stripe

second from the right is faintly visible.

6. Write into the memory by pressing

then .

white

black

second from the right

SUB CONTRAST ADJUSTMENT (RDRV)

1. Input a 75% color-bar signal.

2. Set to VIDEO mode = STANDARD, COLOR = minimum,

PICTURE = 100%.

GON = 0 (OFF), BON = 0 (OFF).

3. Set to Service adjustment Mode and Connect an oscilloscope

pin 1 of CN351 on A Board.

4. Select RDRV with

and .

5. Adjust with

and for the 1.85 ± 0.05Vp-p of level.

6. Write into the memory by

then .

White

Black

1.85±

0.05Vp-p

SUB HUE, SUB COLOR ADJUSTMENT

(2SHU, 2COL, 4SHU, 4COL)

NOTE: 4SHU and 4COL are for Video 4 input.

2SHU and 2COL are for all other inputs.

1. Input a color bar signal.

2. Set to Service Adjustment Mode and set to

VIDEO mode = STANDARD

PICTURE = 100%

COLOR = 50%

HUE = 50%.

3. Connect an oscilloscope to CN351 Pin 3 of A Board.

4. Select SHUE and SCOL with

and .

5. Adjust with and for the V1 = V4 (2COL) and V2 =

V3 (2SHU).

6. Write SHUE data 1 step down from even condition to

NVM. 2COL is adjusted by 2SHU compensation.

7. Write into the memory by pressing

then

.

NOTE: Procedure for 4SHU and 4COL is same as above.