Read the operating instructions thoroughly, particularly the safety instructions.
SHAC 2100 A1
GB│CY
│
1 ■
Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instruc-
tions are a part of this product. They contain important information in regard to
safety, use and disposal. Before using the product, familiarise yourself with all of
these operating and safety instructions. Use the product only as described and
only for the specified areas of application. Retain these instructions for future
reference. In addition, pass these documents on, together with the product, to
any future owner.
Copyright
This documentation is copyright protected.
Any copying or reproduction of it, including as extracts, as well as the reproduction
of images, also in an altered state, is only permitted with the written authorisation
of the manufacturer.
Intended use
This hair dryer is intended only for the drying and shaping of human hair, under
no circumstances is it to be used for wigs and hairpieces made of synthetic material.
This hair dryer is intended for domestic use only. Pay heed to all of the information
in this operating manual, especially the safety instructions. This appliance is not
designed for use in commercial or industrial applications.
This appliance is not intended for any other use or for uses beyond those mentioned herein. Claims of any kind for damage resulting from unintended use will
not be accepted. The operator alone bears liability.
Items supplied
The appliance is delivered with the following components as standard:
1) Remove all parts of the appliance and the operating instructions from the
carton.
2) Remove all packaging material.
3) Clean all parts of the appliance as described in the section “Cleaning”.
■ 2 │ GB
│
CY
SHAC 2100 A1
NOTICE
► Check the contents to make sure everything is there and for visible damage.
► If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the Service Hotline (see section "Service").
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces the amount of waste generated. Dispose of packaging material that
is no longer needed according to the regionally established regulations.
NOTICE
► If possible preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the appliance ideally for its return.
Mains voltage220 - 240 V ~, 50/60 Hz
Nominal power1800 - 2100 W
Protection class
SHAC 2100 A1
II
GB│CY
│
3 ■
Safety instructions
RISK OF ELECTRIC SHOCK
► Connect the hair dryer only to a correctly installed mains
power socket providing electrical energy at the level detailed
on the rating plate.
► Under no circumstances may the hair dryer be submerged in
fluids, or fluids be permitted to enter the appliance housing.
Do not expose the appliance to humidity and do not use it
outdoors. Should liquids enter the housing, disconnect the
appliance from the power source immediately and arrange
for it to be repaired by a qualified technician.
► Disconnect the hair dryer from the mains power socket if
defective operation is apparent and before cleaning it.
► To disconnect it, pull only on the plug itself, not on the power
cable.
► Do not wrap the power cable around the appliance and
protect the cable from being damaged.
► Should the power cable of the appliance be damaged, to
avoid potential risks it must be replaced by the manufacturer,
his customer service or by a qualified technician.
► Do not kink or crush the power cable and lay it in such a way
as to prevent people from stepping on or tripping over it.
► Do not use extension cables.
► Never touch the hair dryer, the power cable or the plug with
wet hands.
► Disconnect the hair dryer from the power source immedi-
ately after use. The appliance is completely free of electrical
power only when you unplug it.
► You are not permitted to open or repair the housing of
the hair dryer. Should you do so, appliance safety can no
longer be assured and the warranty will become void.
Arrange for the hair dryer to be serviced and repaired only
by qualified specialists.
■ 4 │ GB
│
CY
SHAC 2100 A1
RISK OF ELECTRIC SHOCK
Never use the appliance near water, particularly not near
sinks, baths or other vessels. The proximity of water presents
a risk, even when the appliance is switched off. After use,
always disconnect the plug from the mains power socket.
As additional protection, the installation of a faulty-current
protection unit with an activation power rating of not more
than 30 mA is recommended for the power circuit in the
bathroom. Consult your electrician for advice.
WARNING! RISK OF PERSONAL INJURY!
► This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards
involved.
► Children shall not play with the appliance.
► Cleaning and user maintenance shall not be made by children
without supervision.
► When it is switched on, NEVER lay the hair dryer down or
leave it unsupervised.
► Never place the hair dryer close to sources of heat and pro-
tect the power cable against potential damage.
► Do not take the hair dryer into use if it has fallen down or is
damaged in any way.
Arrange for the appliance to be checked and/or repaired
by qualified technicians.
► Do not cover the air intake grill while operating the appli-
ance. Clean the grill at regular intervals.
► The hair dryer becomes hot when it is in use. Hold it only by
the grip when it is hot.
SHAC 2100 A1
GB│CY
│
5 ■
Operation
Heat and blower levels
1) Insert the plug into a power socket.
2) Switch the hair dryer on with the blower level switch .
The hair dryer is fitted with two function switches. With these you can separately
select the strength of the air flow (blower level switch ) and the level of heat
(heat level switch ):
Blower levels
0 The hair dryer is switched off
reduced air flow
full power air flow
Heat levels
low heating level
medium heat level
high heating level
3) After use, switch the appliance off in that you place the blower level switch
into position “0”. Then remove the plug from the wall socket.
Cooling level
With the cooling level button Gyou can produce a cooler air flow with any
combination of blower and heat levels (except level “0”). If you wish to create
a cold air stream, press and hold the cooling level button G. When you no
longer need the cold air stream, release the cooling level button G.
■ 6 │ GB
│
CY
SHAC 2100 A1
Ionisation function
With the Ionic switch-in you can additionally add the ionic function to every
combination of blower and heat level.
■ Set the ionic switch-in to the “
turned on. The indicator lamp lights up.
■ Set the ionic switch-in to the “
turned off.
When drying the hair using a hair dryer, the hair takes on a static charge and
begins to "fly".
The ionisation function ensures that this charging of the hair is neutralised and
cancelled. The hair becomes soft, supple, shiny and easier to style.Please note,
however, that the ionisation function will only work optimally if the attachments
(finger diffuser /styling jet ) are removed as the attachment will interfere
with the application of the ions to the hair. Therefore, use the hairdryer without
attachments for maximum ionisation effect.
Drying and styling hair
■ To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period. Also, place the Ionic switch-in at the position
“
shape the hairstyle.
■ With the supplied styling jet you can apply a directed airflow to shape
and style your hair. Start by removing the finger diffuser first with a
downwards snapping motion. Fit the styling jet by pushing it with light
pressure onto the hair dryer so that it snaps into place and sits evenly on the
hair dryer.
If you no longer require the styling jet , wait until the appliance has cooled
down and pull it off with a downwards snapping motion:
”. After drying the hair, switch to a lower blower and heat level to
“ position: The ionisation function is
“ position: The ionisation function is
SHAC 2100 A1
GB│CY
│
7 ■
Cleaning
■ If you wish to dry your hair especially gently, or create a so-called “air-dried
wave”, then use the finger diffusor . Start by removing the styling jet
with a downwards snapping motion.
Fit the finger diffusor by pushing it with light pressure onto the hair dryer
so that it snaps into place and sits evenly on the hair dryer.If you no longer
require the finger diffusor , wait until the appliance has cooled down and
pull it off with a downwards snapping motion:
■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form.
■ You can use the cooling level button
RISK OF ELECTRIC SHOCK
► Always remove the mains plug from the socket before you clean the appliance.
► Under no circumstances may you immerse the appliance in water or other
liquids when cleaning it!
► After being cleaned, the hair dryer must be completely dry before using it
again.
to cool down your hair down.
G
■ 8 │ GB
WARNING - RISK OF PHYSICAL INJURY!
► Allow the appliance to cool sufficiently before cleaning it.
CAUTION - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.
│
CY
SHAC 2100 A1
Cleaning the housing
■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.
Cleaning the air suction grill
WARNING - RISK OF FIRE!
► Clean the air intake grill at regular intervals with a soft brush.
4) Turn the air intake grill a little way anticlockwise so that it can be removed
from the hair dryer.
5) Clean the openings of the air intake grill with a soft brush.
6) Push the air intake grille back onto the hairdryer so that the tabs on the
air intake grille click back onto the recesses on the hairdryer. Turn the
air intake grille clockwise a little way so that it clicks into place and sits
tightly.
Storage
CAUTION - PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section "Cleaning".
■ For storage purposes, you can hang the hairdryer up by the suspension
loop .
■ Store the hair dryer at a dustfree and dry location.
Troubleshooting
Should your hair dryer not function as expected, first remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under "Service".
SHAC 2100 A1
GB│CY
│
9 ■
Disposal of the device
Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility.Pay heed to the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 5-year warranty valid from the date of purchase. If this product
has any faults, you, the buyer, have certain statutory rights. Your statutory rights
are not restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep
your original receipt in a safe place. This document will be required as proof of
purchase.
If any material or production fault occurs within three years of the date of purchase
of the product, we will either repair or replace the product for you at our discretion.
This warranty service is dependent on you presenting the defective appliance
and the proof of purchase (receipt) and a short written description of the fault
and its time of occurrence.
If the defect is covered by the warranty, your product will either be repaired or
replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and defects
present at the time of purchase must be reported immediately after unpacking.
Repairs carried out after expiry of the warranty period shall be subject to a fee.
■ 10 │ GB
│
CY
SHAC 2100 A1
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines
and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or fragile parts such as
switches, batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the product
regarding proper use of the product are to be strictly followed. Uses and actions
that are discouraged in the operating instructions or which are warned against
must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications / repairs which have not been carried out by one of
our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
■ Please have the till receipt and the item number (e.g. IAN 12345) available
as proof of purchase.
■ You will find the item number on the type plate, an engraving on the front
page of the instructions (bottom left), or as a sticker on the rear or bottom of
the appliance.
■ If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service ad-
dress that will be provided to you. Ensure that you enclose the proof of
purchase (till receipt) and information about what the defect is and when it
occurred.
SHAC 2100 A1
You can download these instructions along with many other manuals,
product videos and software on www.lidl-service.com.