IAN 281916
ACTIVITY TRACKER SADP 4 A1
ACTIVITY-TRACKER
Bedienungsanleitung und Sicherheitshinweise
ACTIVITY TRACKER
Operating instructions and safety instructions
GB / IE / NI Operating instructions and safety instructions Page 1
DE / AT / CH Bedienungsanleitung und Sicherheitshinweise Seite 23
Before reading, unfold the page containing the illustrations and familiarise yourself with all
functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
SADP 4 A1
GB│IE│NI
│
1 ■
Contents
Introduction ................................................2
Information about these operating instructions ...............................2
Copyright ...........................................................2
Notes on trademarks ..................................................2
Intended use .........................................................2
Warnings ...........................................................3
Safety ....................................................3
Basic safety instructions ................................................3
Description of components ...................................4
Use .......................................................5
Unpacking ..........................................................5
Check package contents ...............................................5
Disposal of the packaging ..............................................5
Charging the battery ..................................................5
Downloading the SilverCrest SmartActive app ..............................6
Pairing the tracker with a smartphone .....................................6
Putting on the tracker ..................................................7
Handling and use ...........................................8
Waterproofing .......................................................8
Power-saving mode ...................................................8
Airplane mode .......................................................8
Storing data .........................................................8
Overview of functions ..................................................9
Operating overview (display screen) .....................................10
Settings ............................................................11
Main functions ......................................................12
Optional functions ...................................................13
Modes ............................................................14
Additional functions ..................................................17
Display calls/messages ...............................................17
Starting factory mode .................................................17
Updating the firmware ................................................18
Using the tracker without the app ........................................18
Troubleshooting ...........................................18
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Storage when not in use ....................................19
Disposal ..................................................19
Appendix .................................................20
Technical data ......................................................20
Notes on the EU Declaration of Conformity ................................20
Kompernass Handels GmbH warranty ...................................21
Service ............................................................22
Importer ...........................................................22
SADP 4 A1
■ 2 │ GB
│IE│
NI
Introduction
Information about these operating instructions
Congratulations on the purchase of your new device. You have selected a high-quality
product. The operating instructions are part of this product. They contain important
information about safety, use and disposal. Before using the product, please familiarise
yourself with all operating and safety instructions. Use the product only as described and
for the range of applications specified. Keep these operating instructions as a reference
and store them near the product. Please pass on all documentation incl. these operating
instructions to any future owner(s), if you sell this product or give it away.
Copyright
This documentation is protected by copyright. Any copying or reproduction, including in
the form of extracts, or any reproduction of images (even in a modified state), is permitted
only with the written authorisation of the manufacturer.
Notes on trademarks
■ USB® is a registered trademark of USB Implementers Forum, Inc.
■ The Bluetooth
®
logotype and Bluetooth
®
logo are registered trademarks of
Bluetooth SIG, Inc. (Special Interest Group). Any use of the trademarks by Kompernaß
Handels GmbH is made under the provision of a licence.
■ Apple
®
and the Apple logo are registered trademarks of Apple Inc., Cupertino
Calif., US.
■ App Store is a service mark of Apple Inc.
■ Google Play is a registered trademark of Google Inc.
■ The SilverCrest trademark and the retail name are the property of their respective
owner.
All other names and products may be trademarks or registered trademarks of their
respective owner.
Intended use
The device is an information technology device and is only intended for the recording
and monitoring of your activities and sleeping habits. You can also use the device to
locate your smartphone if you do not know where your smartphone is. The device has
a function for signalling calls and messages. The SilverCrest SmartActive app offers you
the option to set alarms that go off on the device. The device is not intended for any
other purpose, nor for use beyond the scope described. The device is not intended for
use in commercial or industrial environments. The manufacturer accepts no responsibility
for damage caused by failure to observe these instructions, improper use or repairs,
unauthorised modifications or the use of unapproved replacement parts. The risk shall
be borne solely by the user.
SADP 4 A1
GB│IE│NI
│
3 ■
Warnings
The following types of warning are used in these operating instructions:
DANGER
A warning at this hazard level indicates a potentially hazardous
situation.
Failure to avoid this hazardous situation could result in severe injuries or even death.
► Follow the instructions in this warning notice to avoid the risk of serious injuries or
death.
CAUTION
A warning notice of this hazard level indicates a risk of property
damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning notice to prevent material damage.
NOTE
A note provides additional information that makes handling the device easier for you.
Safety
Basic safety instructions
■ Check the device for visible external damage before use. Do not operate a device
which has been damaged or dropped.
■
DANGER! Do not allow children to play with the packaging material! Keep all
packaging materials away from children. There is a risk of suffocation!
■ If you have a heart pacemaker fitted, consult your doctor before wearing the tracker
for the first time.
■ This device may be used by children aged 8 years and above and by persons with
limited physical, sensory or mental capabilities or lack of experience and knowledge,
provided that they are under supervision or have been told how to use the device
safely and are aware of the potential risks. Children must not play with the device.
Cleaning and user maintenance tasks may not be carried out by children unless
they are supervised.
■ If the charger cable or connections are damaged, have them replaced by an
authorised specialist or the customer service department.
■ Protect the charger cable from hot surfaces and sharp edges.
■ Ensure that the charger cable is not stretched tightly or kinked.
SADP 4 A1
■ 4 │ GB
│IE│
NI
■ Do not expose the device to direct sunlight or high temperatures. Otherwise it may
overheat and be irreparably damaged.
■
DANGER! Do not operate the device close to naked flames (e.g. candles) and
do not place burning candles next to the device. This will help to prevent fires.
■ The device may heat up while it is charging. Place the device in a well-ventilated
location during the charging process and do not cover it.
■ If you notice unusual noise, a burnt smell or smoke, immediately disconnect the cable
from the device. Have the device checked by a qualified specialist before using it again.
■ All repairs must be carried out by authorised specialist companies or by the customer
service department. Improper repairs may put the user at risk. It will also invalidate
any warranty claims.
■ The device has an integrated lithium-polymer battery. Improper use of lithium-polymer
batteries can cause fires, explosions, leakages of hazardous materials or other
hazards! Do not throw the device into an open fire.
■ Do not make any unauthorised modifications or alterations to the device.
This device may not be opened by the user.
■ Battery acid leaking from a battery can cause skin irritation. If it contacts your skin,
rinse off with plenty of water. If the liquid comes into contact with your eyes, rinse
thoroughly with plenty of water, do not rub and consult a doctor immediately.
Description of components
(See fold-out page for illustrations)
Display
Menu button
Sensor (for optical pulse measurement)
Charging contact (tracker)
Charging cable
Charging contact (charger cable)
Operating instructions (symbol)
SADP 4 A1
GB│IE│NI
│
5 ■
Use
Unpacking
♦ Remove all parts and the operating instructions from the packaging.
♦ Remove all packaging material.
Check package contents
(See fold-out page for illustrations)
The product includes the following components:
▯ Fitness tracker SADP 4 A1
▯ Charging cable
▯ These operating instructions
NOTE
► Check the package for completeness and for signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defective
packaging or during transport, contact the service hotline (see section Service).
Disposal of the packaging
The packaging materials have been selected for their environmental friendliness and
ease of disposal and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
which are no longer needed in accordance with applicable local regulations.
Charging the battery
Before using the tracker, the integrated battery must be completely charged. Before
charging, dry the charging contacts , with a cloth to avoid corrosion.
♦ Connect the USB plug on the charger cable
to a PC or to a USB power supply.
♦ Connect the charging contact
on the charger cable with the charging
contact on the tracker. This is only possible in one position (see fig. 1).
Fig. 1
SADP 4 A1
■ 6 │ GB
│IE│
NI
NOTE
►
During the charging process, the
display appears. The menu button is inactive
during charging.
► Charging takes about 3 hours on a standard USB connection.
► As soon as the tracker is fully charged,
appears on the display.
NOTE
Operating time with a full charge:
► approx. 2 weeks if heart rate measurement not used
► approx. 1 week if heart rate measurement used for 1 hour per day
► approx. 8 hours if heart rate measurement is constantly recording
The running time can vary depending on the frequency of usage.
When the battery is empty,
appears on the display.
Downloading the SilverCrest SmartActive app
The SilverCrest SmartActive app uses the Bluetooth
®
functionality of your smartphone.
The app allows you to use all the functions of the tracker.
♦ You can download the free app from the Apple
®
App Store or Google® Play.
NOTE
SilverCrest SmartActive app compatibility:
► Android 4.3 and higher
► iOS 7.0 and higher
Pairing the tracker with a smartphone
Before you can use all the functions on the tracker, you need to pair the tracker with a
compatible smartphone running the SilverCrest SmartActive app. The connection must
be established using the SilverCrest SmartActive app, not the Bluetooth
®
settings on
your smartphone.
♦ Activate the Bluetooth
®
connection on your smartphone. You can find a detailed
description of how to do this in the operating instructions for your smartphone.
SADP 4 A1
GB│IE│NI
│
7 ■
♦ Activate the Bluetooth
®
connection on your tracker. Proceed as follows:
1. Press the menu button
before first use for about 7 seconds to activate the
display .
2. Press the menu button
twice more. The pedometer mode is displayed.
3. Press and hold the menu button
for about 3 seconds. appears on
the display . The Bluetooth
®
connection is activated.
♦ Open the SilverCrest SmartActive app. The startup screen appears, followed by
the user profile.
NOTE
►
The data that you store in your user profile must be collected so that the entire range
of functions of your tracker deliver the correct results, such as the heart rate mode.
♦ Set up your user profile and confirm your entries. Now all Bluetooth
®
devices in
range are displayed.
♦ Select the entry SADP 4 A1. The tracker vibrates and is now connected with the
SilverCrest SmartActive app.
Putting on the tracker
NOTE
► We recommend that right-handers wear the tracker on their left wrist and left-handers
on their right wrist.
♦ Place the tracker on your wrist and close the strap (see fig. 2). The sensor
for
optical pulse measurement requires skin contact.
♦ Make sure that the sensor for optical pulse measurement lies centrally on your
wrist
(see fig. 3).
Fig. 2 Fig. 3
SADP 4 A1
■ 8 │ GB
│IE│
NI
Handling and use
Waterproofing
In the following table you can see which situations you can use the tracker in.
Situation Use
Rain shower Yes
Washing hands Yes
Showering No
Bathing/swimming No
Water sports (e.g. diving) No
Power-saving mode
The display switches off after around 10 seconds if not in use.
♦ Press the menu button
to reactivate the display .
Airplane mode
♦ Deactivate the Bluetooth
®
connection on your tracker to switch it to airplane
mode. Proceed as follows:
1. Briefly press the menu button
twice. The pedometer mode is displayed.
2. Press and hold the menu button
for about 3 seconds. The display now
shows . The Bluetooth
®
connection is activated.
3. Briefly press the menu button
. The display now shows . The Bluetooth
®
connection is now deactivated and the tracker is in airplane mode.
Storing data
The tracker stores all measurement data for 14 days. As soon as you open the
SilverCrest SmartActive app, the tracker syncs with the app. The data is then automatically saved in the SilverCrest SmartActive app.
SADP 4 A1
GB│IE│NI
│
9 ■
Overview of functions
You can record your activities and sleeping habits using the tracker. In addition, you can
also make settings in the SilverCrest SmartActive app. You can enter any number of steps
per day as your target and specify your individual sleeping habits. The modes pedometer,
calories and distance show how close you are to your goals as a percentage. In sleeping
mode, you can monitor how good your sleep quality is. A detailed view shows your
sleeping phases (awake, light sleep and deep sleep). You can also record your heart
rate so that you can monitor or check the history. Apart from this, you can set alarms
and use the tracker to locate your smartphone. In addition, you can also use your
smartphone to locate your tracker. The tracker has a function for signalling calls and
messages. You can make settings via the SilverCrest SmartActive app.
SADP 4 A1
■ 10 │ GB
│IE│
NI
Operating overview (display screen)
Operating overview at full mode selection
via the SilverCrest SmartActive app
Start display connected
Press for 1 second
Permanently active
Can be optionally activated
via app
Press for 3 seconds
51– 79% 80–999%
SADP 4 A1
GB│IE│NI
│
11 ■
Settings
NOTE
► The functions shown here are from the SilverCrest SmartActive for iOS devices.
There may be slight differences with Android devices.
► Slight deviations in the displays are also possible.
♦ Press the button (Settings).
♦ Press the "User info" button to edit your saved user profile.
♦ Press the "SADP 4 A1" button to make settings for your tracker.
♦ Press the "Manage connection" button if you want to terminate/re-establish the
connection between the SilverCrest SmartActive app and your tracker.
SADP 4 A1
■ 12 │ GB
│IE│
NI
Main functions
Pedometer mode
In pedometer mode you see the number of steps you have taken and the percentage
of your daily goal. You can set your daily goal via "Settings" in the menu "SADP 4 A1".
Apart from this, you can see the amount of calories you have burnt off and the
distance you have covered. You can see your results in a detailed view which you
can switch between day, week, month and year. You can get to the detailed view by
swiping upwards over the display of your smartphone.
Sleeping mode
Sleeping mode shows your sleep quality and your overall sleep time. You can make
your sleep settings via "Settings" in the menu "SADP 4 A1". A detailed view shows
your sleeping phases (awake, light sleep and deep sleep). You can get to the detailed
view by swiping upwards over the display of your smartphone.
Loading...