Sherwood R-972AG, R-972, 5227-00000-056-0S User Manual
R-972(AG)-Quick_090225:R-972(AG)-Quick 2009-03-23 오 9:06 페이지 1
• This guide shows you how to connect your speakers and DVD player and enjoy multi-channel surround sound.
• For full details on using this unit, refer to the main operating instructions.
• Please be certain that this unit is unplugged from the AC outlet before making any connections.
Placing Speakers
■If you have 5.1 ch speakers ■If you have 7.1 ch speakers
1. Front Left
2. Front Right
3. Center
4. Surround Left
5. Surround Right
6. Subwoofer
7. Surround Back Left
8. Surround Back Right
QUICK START GUIDE
Connecting Speakers
• Be sure to connect speakers firmly and correctly according to the channel (left and
right) and the polarity (+ and -). If the connections are faulty, no sound will be heard
from the speakers, and if the polarity of the
speaker connection is incorrect, the sound
will be unnatural and lack bass.
■Caution
• Be sure to use the speakers with the impedance of 6 ohms or above.
• Do not let the bare speaker wires touch
each other or any metal part of this unit.
This could damage this unit and/or the
speakers.
• Never touch the speaker terminals while the
AC input cord is connected to the wall AC
outlet. Doing so could result in electric
shocks.
1
R-972(AG)-Quick_090225:R-972(AG)-Quick 2009-03-23 오 9:06 페이지 2
Connecting TV & DVD Player
■Connecting a TV
• Connect the TV to the same type of Monitor video output that you did connect to the DVD player, as shown.
■Connecting a DVD Player
• Use a Component, S-video or (composite) video cable to connect this unit's VIDEO 2 to the corresponding video
output on your DVD player, as shown.
• Use an Optical or Coaxial cable to connect this unit's OPT IN 2 or COAX IN 2 to the optical output or the coaxial
output on your DVD player. (You don't need to do both.)
• Use an Audio (analog) cable to connect this unit's VIDEO 2 (L/R) to audio output on your DVD player.
• Use a HDMI cable to connect this unit's HDMI 2 to HDMI output on your DVD player.
QUICK START GUIDE
• There are three types of video jacks (COMPONENT, S-VIDEO, (composite) VIDEO) for analog video connections
and the HDMI connector for digital video and audio connections.
Connect them to the corresponding video jacks according to their capability.
• For your reference, the exellence in picture quality is as follows : "HDMI" > "COMPONENT" > "S-VIDEO" > "(composite) VIDEO".
• When making COMPONENT VIDEO connections, connect "Y" to "Y", "P
to "C
R" (or "R-Y", "PR").
• The HDMI connection can carry uncompressed digital video signals and digital audio signals.
2
B/CB" to "CB" (or "B-Y", "PB") and "PR/CR"
Loading...