Schneider Electric TC-1151 Series, TC-1161 Series Catalog Page

TC-1151 Series, TC-1161 Series

-400 -401 -402 -403 -404

Figure 2 Options for Quantities of 24 or more of each part number.

Add dash number to base part number for desired option.

Specifications

Setpoint dial range See Description Model Chart.

Sensing element Bimetal.

Switching: 2 F degrees (1.1 C degrees).

Differential

Environment

Ambient temperature limits

Humidity 5 to 95% RH, non-condensing.

Locations NEMA Type 1.

Electrical ratings See Model Chart.

Connections Coded screw terminals.

Cover Plastic.

Mounting

Dimensions 4-3/8 H x 4-3/4 W x 1-5/8 D in. (111 x 121 x 41 mm).

Agency Listing UL.

General Instructions

Staging: Adjustable 2 to 10 F degrees (1.1 to 5.6 C degrees), factory adjusted between 2 and 4 F degrees.

Shipping: -40 to 160q F (-40 to 71qC). Operating: 40 to 140qF (4 to 60qC).

Flush on single or 2-gang switch box or 4 x 4 in. (102 x 102 mm) surface box or directly to wall (24 Vac only).

TC-115: Refer to F-18782. TC-1161: Refer to F-16290.

Accessories

Model No. Description

AT-101 Lock cover kit (2 required per thermostat). AT-104 Dial stop pins (note : pins included with each unit). AT-546 Auxiliary mounting plate AT-607 Selector switch sub-base DP4T. AT-608 Selector switch sub-base one DP4T, one DPDT. AT-1155 Plastic guard for TC-1161 series. AT-1163 Plastic guard for TC-1151 series. AT-1165 Plastic guard. TOOL-11 Calibration wrench. TOOL-13 Contact burnishing tool.

256

+ 1 hidden pages