Page 1
APC Industrial Control
Panel UPS
Proven uninterruptible power source for industrial
control panels.
>
A reliable, flexible, costeffective uninterruptible
power source for industrial
control panels.
An industrial control panel UPS
that ensures continuity of
process control and availability
120V
in the event of a utility power
failure.
230V
July 2012
Flexible Installation
High Availability and Reliability
Easy To Maintain
Manageable
Page 2
APC Industrial Control Panel UPS
Segments:
Water/Waste Water
Mining/Metals/Minerals
Biotech / Pharmaceutical
Transportation
Chemical
Food & Beverage
Semiconductor
Automotive
Oil/Gas
Flexible Installation
Industrial Panel or DIN Rail Mountable
Hardwired Input/Output
2
Internal or External Battery Installation
Chassis knockout - right side or bottom –
for external battery cable routing – addresses
NAM NEC 480.9(A) safety requirements
Easy To Maintain
User-Replaceable Batteries – Battery
8
replacement is simple and safe, and can be
performed by the end-user. A technician is not
required to replace the UPS battery.
Hot-Swappable Batteries – End-users or
service personnel can replace the battery even
while the UPS is operating on utility power.
Perform on PM schedule or coordinate with
“Automatic Self Test” as described below.
1
3
Applications:
Manufacturing Equipment :
Machine controllers; Process control;
Sensitive equipment; Safety Infrastructure
Material & Packaging handling :
Fillers; Packaging robots;
Panel feeders/stackers
Automation Control :
PLC„s; I/O Controllers; Industrial PC„s;
SCADA systems; OIT‟s and RTU‟s
IP-based Devices :
Industrial Ethernet; Imaging;
Material-analysis; Motion sensors
Manageable
Integrated Dry Contact I/O
DB-9 Serial Port Communications
APC SmartSlot – Optional Network
6
Management, Modbus, or Relay I/O Contacts
Card. NOTE: Integrated Dry Contact I/O is
disabled when card installed in SmartSlot
LED Status Indicators – External status
LEDs indicate the state of the UPS: On-Line or
On-Battery; Battery disconnected or needs to be
replaced.
Audible Alarms – Audible alarms (beeps)
notify the end-user of the following conditions:
On-Battery; Low Battery; Replace Battery.
7
4
5
7
High Availability and Reliability
Temperature-compensated Battery
Charging – Prolongs battery life by
regulating the charge voltage according to
battery temperature.
Automatic Self-Test – Periodic battery
self-test ensures early detection of a
battery that needs to be replaced. Default
is bi-weekly; recommend at least
quarterly test to insure reliable operation
July 2012
4
5
2
6
8
1
3
Page 3
SKU
SUA500PDR-S (standard battery)
SUA500PDR-H (high temperature battery)
SUA500PDRI-S (standard battery)
SUA500PDRI-H (high temperature battery)
Input
Nominal Input Voltage
120V
230V
Input Voltage Range
82 - 144VAC
160 - 280VAC
Input Frequency
45 - 65Hz; Auto-Selecting
Input Connections
Hardwired Input (3-W ire; H-N-G)
Output
Nominal Output Capacity
500 VA / 325 W
Topology
Line Interactive
Waveform
Sine wave
Nominal Output Voltage
120V
Default: 230V (User Configurable: 220/230/240)
Output Frequency
50/60 +/- 3Hz; Sync To Mains
Efficiency (Full-Load)
>94%
Output Voltage Distortion (Full Load)
<2% (100% Linear Load); <8% (100% Non-Linear Load)
Output Connections
Hardwired Output (3-W ire; H-N-G)
Protection
Surge Energy Rating
540 Joules
340 Joules
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets
UL 1449
Thermal Protection
Yes
Communications and Controls
Serial Port
DB9; UPS Status, and Control of User Configurable Parameters
SmartSlot
SmartSlot Accessories; AP9630 and AP9631 Network Cards, AP9610 Relay I/O Card, AP9622
Modbus Card
Emergency Power Off (EPO)
Terminal Block
Front Display Panel Buttons
On/Off, Self-Test, Alarm Silence, Cold-Start
Visual and Audible Status Indicators
LEDs
On-Line, On-Battery, Overload, Replace Battery; and Load and Battery Bar-Graphs
Audible Alarm
On-Battery, Low-Battery, Overload
Physical
Dimensions (HxWxD)
5.84"x14.24"x7.72" (148x362x171 mm)
Net Weight
18lb (8.18kg)
Color
Black
Environment
Operating Temperature / Humidity
0 To 40 (°C) / 0 - 95% (Non-Condensing) (with Standard Battery) (-S SKUs)
0 To 50 (°C) / 0 - 95% (Non-Condensing) (with High-Temp Battery) (-H SKUs)
Storage Temperature / Humidity
-5 To 60 (°C) / 0 - 95% (Non-Condensing)
Mounting
Panel or DIN-Rail Mounting
Conformance
Regulatory Certifications
cUL, UL 1778, FCC (Class A), CE (Class A), VDE
Battery Cartridge
APCRBC135
APCRBC136
Battery
Battery Type
Maintenance-Free, Sealed Lead Acid Battery
Nominal Battery Voltage
24VDC
Runtime (Full Load)
8.5 minutes
Recharge Time (To 90%)
<3 Hours
Expected Battery Life
3 To 5 Years at 20°C
up to 8 Years at 20-25°C
Physical
Dimensions (HxWxD)
4.22"x4.20"x5.65" (107x107x144 mm)
Net Weight
10.3lb (4.68kg)
7.26lb (3.3kg)
Environment
Operating Temperature / Humidity
0 To 40 (°C) / 0 - 95% (Non-Condensing)
0 To 50 (°C) / 0 - 95% (Non-Condensing)
Storage Temperature / Humidity
-15 To 45 (°C) / 0 - 95% (Non-Condensing)
July 2012
Loading...