Samsung TX-R2735, CZ-21S8MLB, CZ-21M21ML, CS-29M6MB, CS-29M6MN User Manual

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 1

COLOUR

TELEVISION

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

DNIe Jr (OPTION) (Digital Natural Image engine Junior)

TELETEXT (OPTION)

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 3

ENG

	Contents
CONNECTING AND PREPARING YOUR TELEVISION
■ Control Panels (depending on the model) .....................................................		5
■ Connection Panels (depending on the model) ..............................................		6
■ Infrared Remote Control (All Functions Except Teletext) ..............................		8
■ Infrared Remote Control (Teletext Functions) ...............................................		9
■ Inserting the Batteries in the Remote Control................................................		10
■ Connecting to an Aerial or Cable Television Network ...................................		10
■ Switching Your Television On and Off...........................................................		11
■ Placing Your Television in Standby Mode .....................................................		11
■ Becoming Familiar with the Remote Control .................................................		12
■ Plug & Play Feature (depending on the model).............................................		13
■	Viewing the Demonstration............................................................................	14
■	Choosing Your Language..............................................................................	14
SETTING THE CHANNELS
■	Storing Channels Automatically.....................................................................	15
■	Storing Channels Manually............................................................................	16
■	Skipping Unwanted Channels .......................................................................	18
■ Sorting the Stored Channels .........................................................................		19
USING YOUR TELEVISION
■ Changing the Picture Standard .....................................................................		20
■ Adjusting the Picture Settings........................................................................		21
■ Selecting the Picture Size..............................................................................		22
■ Extra Picture Settings (depending on the model)..........................................		23
■ Using the Tilt Control Feature (depending on the model)..............................		24
■ Setting the Blue Screen.................................................................................		24
■ Changing the Sound Standard ......................................................................		25
■ Adjusting the Sound Settings (depending on the model) ..............................		26
■ Extra Sound Settings (depending on the model)...........................................		27
■	Selecting the Melody .....................................................................................	28
■ Selecting the Sound Mode (depending on the model) ..................................		29
■ Setting and Displaying the Current Time.......................................................		30
■ Setting the Sleep Timer .................................................................................		31
■ Switching the Television On and Off Automatically .......................................		32
■ Setting the Preferred Volume Level...............................................................		33
■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ......		34
■ Activating the Child Lock ...............................................................................		35
■ Viewing an External Signal Source (depending on the model) .....................		36

3

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 4

ENG

Contents (continued)
USING THE TELETEXT FEATURE (depending on the model)
■ Teletext Feature (depending on the model) ..................................................	38
■ Displaying the Teletext Information (depending on the model) .....................	38
■ Selecting a Page by Number (depending on the model)...............................	39
■ Using FLOF to Select a Page (depending on the model)..............................	40
■ Storing Teletext Pages (depending on the model) ........................................	40
ADDITIONAL INFORMATION ON CONNECTIONS
■ Connecting to the AV-1 or 2 Input/Outputs....................................................	41
■ Connecting to the S-VIDEO Input (depending on the model)........................	41
■ Connecting to the DVD Input (depending on the model)...............................	42
■ Connecting to the RCA Input (depending on the model)...............................	42
■ Connecting to the Audio Output (depending on the model) ..........................	42
■ Connecting Headphones (depending on the model).....................................	43
■ Viewing Pictures From External Sources (depending on the model) ............	43
RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Colour Patches.......................................	44
■ Troubleshooting: Before Contacting Service Personnel................................	44

Symbols
Press	Important	Note

4

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 5

Control Panels (depending on the model)

The actual configuration on your TV may be different, depending on	ENG
your model.

Front of the TV

1)	Input source selection										5)		Remote control sensor
2)	Menu display										6)		Standby indicator
3)	Volume adjustment										7)		Power On/Off

4)Channel selection

Using the Buttons on the Panel

If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:

Switch on the TV when it is in Standby mode and select channels ( CH or CH ).

Access the menu ( MENU ).

Adjust the volume ( - VOL + ).

Switch among Video input modes ( TV/VIDEO ).

5

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 6

Connection Panels (depending on the model)

ENG

This figure shows the Standard Connector-jack panel.

The actual configuration on your TV may be different, depending on

the model.

Side of TV

Front of TV

ŒCONNECTING EXTERNAL A/V DEVICES (INPUT)

The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.

When both the side (or front) and rear connectors are connected to external equipment, the side (or front) AV has the priority.

When using the mono equipment such as camcorders, video disc players and some video game devices, connect to the “AUDIO-L” input connector.

´CONNECTING EXTERNAL S-VIDEO DEVICES (INPUT) (Option)

- Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR.

ˇCONNECTING HEADPHONES (Option)

-You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room.

-Prolonged use of headphones at a high volume may damage your hearing.

Whenever you connect an audio or video system to your television, ensure that all elements are switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

6

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 7

Connection Panels (depending on the model) (continued)

ENG

Rear of TV

ŒMONITOR OUT (VIDEO / L-AUDIO-R)

Outputs for external devices.

´AV 1 (VCR) -VIDEO/AUDIO(L/R) AV 2 (VCR) -VIDEO/L-AUDIO-R

Inputs or outputs for external devices, such as VCR,DVD, video game device or video disc players.

ˇCOMPONENT (DVD)

VIDEO (Y/Pb/Pr) and AUDIO (L/R) inputs for Component.

¨VHF/UHF (75Ω)

75Ω Coaxial connector for Aerial/ Cable Network.

ˆ / (SCART)

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

Available format for Component Inputs : 480i

When using the mono equipment such as camcorders, video disc players and some video game device, connect to the “AUDIO-L” input connector.

7

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 8

Infrared Remote Control (All Functions Except Teletext)

	ENG	The actual configuration on your TV may be different, depending on
		the model.

TELEVISION STAND-BY

DIRECT CHANNEL SELECTION
	SWITCH REPEATEDLY
ONE/TWO-DIGIT CHANNEL	BETWEEN THE LAST TWO
	CHANNELS DISPLAYED
SELECTION

NEXT CHANNEL

VOLUME INCREASE

TEMPORARY SOUND SWITCH-

OFF

VOLUME DECREASE

EXTERNAL INPUT SELECTION

PREVIOUS CHANNEL

TUNER/CABLE NETWORK
SELECTION	INFORMATION DISPLAY

EXIT FROM ANY DISPLAY

MENU DISPLAY

MOVE TO THE REQUIRED MENU

OPTION/

ADJUST AN OPTION VALUE

RESPECTIVELY

CHANGE CONFIRMATION

PICTURE SIZE

SOUND MODE SELECTION AUTOMATIC SWITCH-OFF

TURBO SOUND PICTURE EFFECT SELECTION

SOUND MENU DISPLAY

SOUND EFFECT SELECTION

Operation of remote control may be affected by bright artificial light near to the TV set.

8

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 9

Infrared Remote Control (Teletext Functions)

ENG

TELETEXT PAGE HOLD

TELETEXT NEXT PAGE

TELETEXT MODE SELECTION (LIST/FLOF)

TELETEXT PREVIOUS PAGE

TELETEXT REVEAL

PROGRAMME SELECTION

BY NAME

TELETEXT SUB-PAGE

TELETEXT DISPLAY/ MIX BOTH TELETEXT

INFORMATION AND THE NORMAL BROADCAST

FASTEXT TOPIC SELECTION

TELETEXT SIZE SELECTION

TELETEXT STORE

9

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 10

Inserting the Batteries in the Remote Control

ENG

You must insert or replace the batteries in the remote control when you:

Purchase the television

Find that the remote control is no longer operating correctly

1Remove the cover on the rear of the remote control by pressing the symbol () downwards and then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:

- on the battery against - on the remote control+ on the battery against + on the remote control

3Replace the cover by aligning it with the base of the remote control and pressing it back into place.

Connecting to an Aerial or Cable Television Network

Rear of the TV

or

Cable Television

Network

P 4

Mono

To view television channels correctly, a signal must be received by the set from one of the following sources:

An outdoor aerial

A cable television network

A satellite network

1In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television.

2If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear.

For further details, refer to:

“Storing Channels Automatically” on page 15.

“Storing Channels Manually” on page 16.

Signal Strength( ) display (Option)

The “ ”(Signal Strength) symbol is displayed by

pressing the “INFO ()” button. This symbol displays signal strength for your watching TV channel. The more signal bar is the better TV gets sensitivity on current channel.

10

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 11

Switching Your Television On and Off

ENG

The mains lead is attached to the rear of your television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2 Press the “ ” button (On/Off) on the front of the television.

Result: The Standby indicator on the front of the television lights up.

3Press the POWER () button on the remote control to switch the television on.

Result: The programme that you were watching last is reselected automatically.

If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 15 or “Storing Channels Manually” on page 16.

4To switch your television off, press the “ ” button (On/Off) again.

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:

Power consumption

Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER () button on the remote control.

Result: The screen is turned off and the Standby indicator on the front of the television lights up in red.

2To switch the television back on, simply press the POWER () button again.

You can also switch on by pressing the P or button.

Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for

example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.

11

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 12

Becoming Familiar with the Remote Control
ENG
The remote control is used mainly to:
Change channels and adjust the volume
Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button	Viewing Function			Menu Function
	Used to display the next			-
	stored channel.
	Used to display the previous			-
	stored channel.
to	Used to display the corresponding channels.
-/--	Used to select a channel numbered ten or over.
	Press this button, and the “--” symbol is displayed.
	Enter the two-digit channel number.
PRE-CH	Press the PRE-CH button. The TV will switch to the last
	channel viewed.
	To quickly switch between two channels that are far apart,
	tune to one channel, then use the number button to select
	second channel. Then, use the PRE-CH button to quickly
	alternate between them.
	Used to increase the volume.			-
	Used to decrease the volume.			-
MUTE	Used to switch the sound off temporarily.
	To turn the sound back on, press this button again, or
	press the	or	button.
MENU	Used to display the			Used to return to the previous
	on-screen menu system.			menu or normal viewing.
	-			Used to:
				Display a submenu
				containing selections for
				the current menu option
				Increase/decrease a
				menu option value
	-			Used to confirm your choice.
EXIT	-			Used to exit from the menu
				system and return to normal
				viewing directly.
TV	Used to return the TV			-
	mode when it is in external
	input mode.
12

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 13

Plug & Play Feature (depending on the model)

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1If the television is in Standby mode, press the POWER () button on the remote control.

Result: The message Plug & Play is displayed. It flickers for a little while and then Language menu is automatically displayed.

2Select the appropriate language by pressing the ▼ or ▲ button. Press the ENTER () button to enter the language.

Result: The message Check antenna input. is displayed.

If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3Make sure that the antenna is connected to the TV. Press the ENTER () button.

Result: The Auto Store menu is displayed with Area is selected.

4Press the ENTER () button again. Select your area by pressing the ▼ or ▲ button, and then Press the ENTER () button.

To search the channels, select Search by pressing the ▼ or ▲

button, and then press the ENTER () button.

Press the ENTER () button again to start search the channels. Press the MENU () button to stop the search.

Result: The Time menu is displayed with Clock is selected.

Refer to “Storing Channels Automatically” on page 15.

5Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the ▼ or ▲ button.

Refer to “Setting and Displaying the Current Time” on page 30.

6When you have finished, press the MENU () button.

Result: The message Enjoy your watching is displayed, and then the channel which has been stored will be activated.

7If you want to reset this feature...

1 Press the MENU () button.

2Press the ▼ or ▲ button to select Setup, and then press the ENTER () button.

Result: The Plug & Play is selected.

3Press the ENTER () button again.

Result: This feature starts with the message Plug & Play is displayed.

ENG

Plug & Play

Language

English

Melayu

Indonesia

Move	Enter
Check antenna input.
Enter	Exit
TV	Auto Store
Area	: ASIA W/EUROPE √
Search	√

Move

Enter

Return

Search

Start

Enter

Return

TV

Time

Clock

-- : -- am

Sleep Timer

: Off

On Timer

-- : -- am Off

Off Timer -- : -- am Off

On Timer Volume

: 10

Move

Enter

Return

Enjoy your watching

TV

Setup

Plug & Play

√

Language

: English

√

Time

Child Lock

√

Blue Screen

: Off

√

Melody

: On

√

Demonstration

√

Move

Enter

Return

13

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 14

Viewing the Demonstration

ENG

	TV						Setup
			Plug & Play						√
			Language			: English			√
			Time
			Child Lock						√
			Blue screen				: Off		√
			Melody				: On		√
			Demonstration						√
	Move					Enter		Return

To become familiar with the various menus provided by your television, you can view the in built demonstration.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▼ or ▲ button to select Setup.

Result: The options available in the Setup group are displayed.

3Press the ENTER () button.

4Press the ▼ or ▲ button to select Demonstration.

5Press the ENTER () button.

Result: Each of the menu options is displayed in turn.

When you wish to exit from the demonstration, press the EXIT () button on the remote control.

Choosing Your Language

	TV						Setup
			Plug & Play						√
			Language			: English
			Time						√
			Child Lock						√
			Blue screen				: Off		√
			Melody				: On		√
			Demonstration						√
	Move					Enter		Return

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▼ or ▲ button to select Setup.

Result: The options available in the Setup group are displayed.

3Press the ENTER () button.

4Press the ▼ or ▲ button to select Language.

5Select the appropriate language by pressing the ENTER () button repeatedly.

14

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 15

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▼ or ▲ button to select Channel.

Result: The options available in the Channel group are displayed.

3Press the ENTER () button.

Result: The Auto Store is selected.

4Press the ENTER () button again.

Result: The options available in the Auto Store group are displayed with Area is selected.

5Press the ENTER () button again.

6Select your area by pressing the ▼ or ▲ button, then press the

ENTER () button.

The areas are displayed in the following order:

ASIA W/EUROPE - CIS E/EUROPE - CHINA - HONGKONG U/K - AUSTRALIA - NZ/INDONESIA - SOUTH AFRICA - AMERICA

7Press the ▼ or ▲ button to select Search, then press the ENTER () button.

8Press the ENTER () button to start the search.

Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

To stop the search before it has finished, press the MENU () button.

9When searching and storing are complete, the Sort menu is displayed.

To sort the stored channels into the desired numerical order, go to Step 6 of the “Sorting the Stored Channels” procedure on page 19.

To exit from the channel store function without sorting the

channels, press the MENU () button repeatedly until the menus disappear.

10When the channels have been stored, you can:

Sort them in the order required (refer to page 19)

Clear a channel (refer to page 18)

Activate the Digital Noise Reduction feature (refer to page 23)

ENG

	TV						Channel
			Auto Store						√
			Manual Store						√
			Add/Delete						√
			Sort						√
			LNA			: Off			√
	Move				Enter			Return
	TV						Auto Store
			Area		:	ASIA W/EUROPE			√
			Search			CIS E/EUROPE			√
						CHINA
						HONGKONG U/K
						AUSTRALIA
						NZ/INDONESIA
						SOUTH AFRICA
						AMERICA
	Move				Enter			Return
	TV						Auto Store
			Area		: ASIA W/EUROPE				√
			Search						√

Move	Enter	Return
	Search
	Start
	Enter	Return
	Search
P1		102 MHZ
		7%
	Stop
	Enter	Return
TV		Sort
From	: P 1
To	: P--
Store	: ?
Move	Adjust	Return

15

KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 16

Storing Channels Manually

ENG

TV

Channel

Auto Store

√

Manual Store

√

Add/Delete

√

Sort

√

LNA

: Off

√

Move

Enter

Return

TV

Manual Store

Programme

: P 3

Color System

: AUTO

√

Sound System

: BG

√

Search

: 46MHz

Channel

: C 1

Store

: ?

Move

Adjust

Return

TV

Manual Store

Programme

: P 3

Color System

: AUTO

√

Sound System

: BG

√

Search

: 46MHz

Channel

: C 1

Store

: ?

Move

Enter

Return

TV

Manual Store

Programme

: P 3

Color System

:

AUTOuto

√

Sound System

:

PAL

√

BG

SECAM

Search

:

NT446MHz.43

NT3.58

Channel

:

P 1

Store

: ?

Move

Enter

Return

TV

Manual Store

Programme

: P 3

Color System

: AUTO

√

Sound System

: BG

√

Search

: 46MHz

Channel

: C 1

Store

: ?

Move

Enter

Return

TV

Manual Store

Programme

: P 3

Color System

: AUTO

√

Sound System

:

BGBG

√

DK

Search

:

46MHz

I

Channel

:

CM 1

Store

: ?

Move

Enter

Return

You can store the channels, including those received via cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found

The programme number of each stored channel which you wish to identify

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▼ or ▲ button to select Channel.

3Press the ENTER () button.

Result: The options available in the Channel group are displayed.

4Press the ▼ or ▲ button to select Manual Store.

5Press the ENTER () button.

6To assign a programme number to a channel, press the œ or √ button.

7Press the ▼ or ▲ button to select Color system.

8Press the ENTER () button.

9Press the ▼ or ▲ button to select the broadcasting standards.

Result: The color standards are displayed in the following order:

AUTO - PAL - SECAM - NT4.43 - NT3.58.

10Press the ENTER () button.

11Press the ▼ or ▲ button to select Sound System.

12Press the ENTER () button.

13Press the ▼ or ▲ button to select the sound standards.

Result: The sound standards are displayed in the following order:

BG - DK - I - M.

14 Press the ENTER () button.

16