Q-See QSDNV Technical Manual

MONITOR

电源

DVR

监视器

电源

摄像机

E. DIMENSIONS：

Indoor Color CMOS Dome

Camera

CCTV SYSTEM

●

Do not open the cover of the camera It will no longer be

waterproof if it is ipened.

（a）

Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers.

There are no user serviceable parts inside. Ask a qualified service

person for servicing.
（b）Handle the camera with care.

Do not abuse the camera. Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.

（c）Do not use strong or abrasive detergents when cleaning the

camera body.

Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove, use a mild detergent and wipe
gently.
（d）Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.

（e）Do not aim strong light directly into the camera, it will prevent
the camera from producting effective video.

A. PRECAUTIONS：

THIS CCTV COLOR CMOS CAMERA Introduces advanced CMOSand digital
technology, and offers customers a high quality and high resolution picture.

Compared with the old chipset, the sensitivity, smear, dynamic range and S/N are

improved drastically.

High-resolution 1/4" CMOS image sensor with image resolution of

400TVL.

Automatic white balance function enables the camera to produce
correct and nature colors in any light conditions, by automatically
adjusting the white balance point.

The high performance digital-processing chip greatly improves the

signal-to-noise ratio and distortion

B. FEATURES：

（b）

One monitor system with two or more cameras

：

（a）One monitor system with one camera：

Video monitor

AC ADAPTER

CAMERA

Video monitor

AC ADAPTER

CAMERA

C. CONNECTION：

COLOR 1/4" CMOS

NTSC:648(H)×488(V) PAL:648(H)×488(V)

400TVL

Internal

Interlace 2:1

NTSC: 1/60s~1/100000s PAL:1/50s~1/100000s

Auto

0.45

1.0Vp-p 75Ω, BNC connection

0 Lux/F2.0 (When IR LEDs on)

Indoor use only

Auto

Auto

<DC12V 500mA

<2W

3.66×2.51 in (93×64 mm)

-10℃～+50℃ (14°F to 122°F) RH 95% Max

≥48dB

Scanning system

Sync System

Electronic Shutter

White Balance

Image Sensor

Effective Pixels

Horizontal Resolution

Viewing Angle

Waterproof level

S/N Ratio

Gamma

Video Output

Usable Illumination

Power Supply

Power Consumption

Operating Temp

AGC

BLC

Dimension

D. SPECIFICATIONS：

Indoor use only.

www.q-see.com

WARNING

To prevent fire or shock hazard do not expose the
insides of the unit to rain or moisture.

This symbol alerts the user to the presence of important operating
and maintenance issues according to the manual.

SA 1966

This symbol alerts the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock .

SA 1965

CAUTION:

To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK) NO USER-SERVICEABLE

PARTS INSIDE REFER SERVICING TO QUALFIED

SERVICE PERSONINEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

!

MODEL: QSDNV

Use for ceilling, elevator, bus etc.

This chip features a field period readout system and an electronic

shutter with variable charge-storage time.

5.2 oz (148g)

Weight

Lens

Fixed 6.0mm(30°-35°)

6.0mm lens

＜3.6W

●

Do not aim the camera at bright or strong light sources, this

will make the camera ineffective in capturing pictures.

Caution

●

Please keep the camera within the limits of the assigned

voltage and electric current.

●

Please use the camera only in applications with temperatures

below 70°C(158°F).

● Please use the right electric cable to power the camera.

● Don't use corrosive substances to clean the glass.

φ5 LED, 12pcs

IR LEDs Distance

IR LEDs Amount

30ft