Pioneer AVH-X490BS, AVH-X5800BHS, AVH-X3800BHS, AVH-X2800BS, AVH-X4800BS Owner's Manual

...

0 (0)

AVH-X490BS

Important (Serial number)

The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card

Le numéro de série se trouve sous cet appareil. Pour votre sécurité et votre commodité, pensez à inscrire ce numéro sur la carte de garantie fournie.

El número de serie está ubicado en la parte inferior de esta unidad. Para su seguridad y comodidad, asegúrese de registrar este número en la tarjeta de garantía incluida.

AVH-X390BS

DVD RDS AV RECEIVER RÉCEPTEUR A/V RDS DVD RADIO AV RDS CON DVD

English Français Español

Important (numéro de série)

Importante (Número de serie)

Owner’s Manual

Manuel du propriétaire

Manual de Instrucciones

Contents

Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.

Important

The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.

■ Precaution ..........................4

Information to User ..........................................4

Important safety information ............................5

Parking brake interlock .....................................5

When using a display connected to V OUT ......5

To avoid battery exhaustion ..............................5

Rear view camera ............................................5

Handling the USB connector ............................6

Failure to operate .............................................6

Visit our website ...............................................6

Protecting the LCD panel and screen...............6

Notes on internal memory ................................6

About this manual ............................................6

Use and care of the remote control ..................6

■ Basic operation ..................7

Checking part names and functions .................7

Remote control ................................................7

Notes on using the LCD panel .........................8

Adjusting the LCD panel angle .........................8

Inserting/ejecting/connecting media.................8

On rst-time startup .........................................8

How to use the screens ..................................10

Supported AV source .....................................11

Displaying the AV operation screen ................11

Selecting a source .........................................11

Changing the display order of sources ...........11

Using the touch panel ....................................11

■ Registration and

connection of Bluetooth®

device ...............................12

Displaying the “Bluetooth” screen ...................12

Registering your Bluetooth devices ................12

Connecting a registered Bluetooth device

manually ...................................................12

Switching visibility ..........................................13

Entering the PIN code for Bluetooth wireless

connection ................................................13

Displaying the device information ...................13

Clearing the Bluetooth memory......................13

Updating Bluetooth software ..........................13

Displaying the Bluetooth software version ......13

Switching the connected Bluetooth device .....13

■ Hands-free phoning .........14

Displaying the Phone menu screen ................14

Making a phone call .......................................14

Receiving a phone call ...................................15

Minimizing the dial conrmation screen .........15

Changing the phone settings .........................15

Using the voice recognition function (for

iPhone) .....................................................15

Setting phone book auto synchronization ......15

Notes for hands-free phoning .........................15

■ Setup for iPod / iPhone or

smartphone ......................16

The basic ow of iPod / iPhone or smartphone

setup .........................................................16

Setting the device connection method............16

iPod compatibility ...........................................16

™

device compatibility.........................16

Android Information on the connections and functions

for each device ..........................................17

■ Radio ................................18

Starting procedure .........................................18

Storing the strongest broadcast

frequencies ...............................................18

Tuning into strong frequencies .......................18

■ Disc ...................................19

Starting procedure .........................................20

Selecting les from the le name list ..............20

Switching the media le type ..........................20

Searching for the part you want to play ..........20

Operating the DVD menu ...............................20

Switching the subtitle/audio language ............20

Operating the DVD menu using touch panel

keys ..........................................................20

■Compressedles .............21

Starting procedure (for Disc) ..........................23

Starting procedure (for USB) ..........................23

Operations common to all le types ...............23

Audio le operations.......................................23

Still image le operations ...............................24

■ iPod ..................................24

Connecting your iPod .....................................25

Starting procedure .........................................25

Selecting song or video sources from the

playlist screen ...........................................25

Using this product’s iPod function from your

iPod ...........................................................26

Selecting a song from the list related to the

song currently playing (link search) ...........26

■ AppRadioOne ..................26

Using AppRadioOne ......................................26

Using the audio mix function ..........................27

■ Pandora

Pandora operations ........................................28

Starting procedure .........................................28

Selecting a Pandora station from the list ........28

Adding a station .............................................28

Storing the preset stations .............................29

■ Spotify

Using Spotify with your Pioneer car audio/

video .........................................................30

Starting procedure .........................................30

Selecting a track or station from the list ..........31

..........................27

.............................29

■ Bluetooth audio player ....31

Starting procedure .........................................31

Selecting les from the le name list ..............32

■ SiriusXM

Radio ................................32

SiriusXM tuner operations ..............................33

Starting procedure .........................................33

Selecting a channel from a list of all

channels ...................................................33

Selecting a channel from the category list ......33

Switching the displayed list ............................33

Setting TuneStart Using TuneScan

Satellite

™

.........................................33

™

...........................................33

Using category scan ......................................34

Using TuneMix

About SmartFavorites ....................................34

Using iTunes Tagging .....................................34

Activating the Trafc & Weather Now ..............34

Displaying the “SiriusXM settings” screen ......34

Using SportsFlash

Using Featured Favorites Band ......................35

Restoring the “SiriusXM Settings” to the

default .......................................................35

™

.............................................34

™

list ..................................34

■ AUX source ......................36

Starting procedure .........................................36

Setting the video signal ..................................36

■ AV input ............................36

Starting procedure .........................................36

Setting the video signal ..................................36

■ MIXTRAX ..........................37

MIXTRAX operation .......................................37

MIXTRAX EZ operation..................................37

Displaying the “MIXTRAX Settings” screen ....37

Setting the ash pattern .................................38

■ System settings ...............38

Displaying the “System” setting screen ..........38

Setting Bluetooth audio source activation ......38

Setting Spotify source activation ....................38

Setting the ever scroll .....................................38

Setting the beep tone .....................................38

Setting the auto audio mix function ................38

Setting AppRadioOne Sound .........................38

Setting the rear view camera ..........................38

Setting the demo mode ..................................39

Selecting the system language ......................39

Setting the keyboard language with the

application for iPhone................................39

Adjusting the response positions of the touch

panel (touch panel calibration) ..................39

Setting the dimmer .........................................40

Adjusting the picture ......................................40

Displaying the rmware version .....................40

Displaying the open source licenses ..............40

Updating rmware ..........................................41

■ Audio adjustments ..........41

Displaying the “Audio” setting screen .............41

Using fader/balance adjustment .....................41

Switching sound muting/attenuation ..............41

Contents

Adjusting source levels ..................................41

Using the auto level control ............................41

Adjusting loudness .........................................41

Setting the subwoofer output..........................42

Adjusting the cutoff frequency value ..............42

Switching the rear speaker output ..................42

Using BASS Boost .........................................42

Selecting the listening position .......................42

Adjusting the speaker output levels nely .......42

Adjusting the time alignment ..........................42

Switching the time alignment preset ...............43

Using the equalizer ........................................43

Adjusting the equalizer curve automatically

(Auto EQ) ..................................................43

Saving the sound settings ..............................44

Loading the sound settings ............................44

■ Theme menu ....................45

Selecting the background display ...................45

Setting the illumination color ..........................45

Selecting the theme color ...............................45

Selecting the clock image ..............................45

■ Setting up the video

player ................................46

Setting the top-priority languages ..................46

Setting the angle icon display .........................46

Setting the aspect ratio ..................................46

Setting parental lock ......................................46

Displaying your DivX VOD registration

code ..........................................................47

Displaying your DivX VOD deregistration

code ..........................................................47

Automatic playback of DVDs ..........................47

Setting the video signal for the rear view

camera ......................................................47

■ Favorite menu ..................48

Creating a shortcut ........................................48

Selecting a shortcut .......................................48

Removing a shortcut ......................................48

■ Common operations ........48

Setting the time and date ...............................48

Storing song information to an iPod (iTunes

Tagging) ....................................................48

Setting the “Sound Retriever” function ............49

Changing the wide screen mode ....................49

■ Other functions ................49

Restoring this product to the default

settings .....................................................49

■ Connection .......................50

Precautions ....................................................50

Precautions before connecting the system .....50

Before installing this product ..........................50

To prevent damage ........................................50

Notice for the blue/white lead .........................51

This product ...................................................51

Power cord .....................................................51

Speaker leads ................................................51

Power amp (sold separately) ..........................52

iPhone and smartphone .................................52

iPhone with Lightning connector ....................52

iPhone with 30-pin connector .........................53

Android device ...............................................53

Camera ..........................................................53

External video component and the display .....54

■ Installation .......................54

Precautions before installation .......................54

Before installing .............................................54

Installation notes ............................................54

Installation using the screw holes on the side of

this product ...............................................55

Installing the microphone ...............................55

Mounting on the sun visor ..............................55

Installation on the steering column .................55

Adjusting the microphone angle .....................56

■ Appendix ..........................56

Troubleshooting .............................................56

Error messages .............................................57

Handling and care of discs .............................59

Playable discs ................................................60

Detailed information for playable media .........60

Bluetooth .......................................................63

satellite radio .................................63

SiriusXM

WMA ..............................................................63

FLAC ..............................................................63

DivX ...............................................................63

AAC ...............................................................63

™

........................................................63

Android Detailed information regarding connected iPod

devices ......................................................63

Using app-based connected content ..............64

........................................................64

Pandora

..........................................................64

Spotify

Notice regarding video viewing ......................64

Notice regarding DVD-Video viewing .............64

Notice regarding MP3 le usage ....................64

Using the LCD screen correctly ......................65

Specications.................................................65

Precaution

Information to User

 MODEL NO. : AVH-X490BS, AVH-X390BS

Contains FCC ID : AJDK071

 This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

 The Bluetooth antenna cannot be removed (or replaced)

by user.

 This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

 This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

 Alteration or modifications carried out without

appropriate authorization may invalidate the user’s right to operate the equipment.

 NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.  Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV techni-

cian for help.

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

CAUTION

This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

CAUTION—CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level— a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

 Set your volume control at a low setting.  Slowly increase the sound until you can hear it comfortably

and clearly, without distortion.

 Once you have established a comfortable sound level, set

the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

 Do not turn up the volume so high that you can’t hear what’s

around you.

 Use caution or temporarily discontinue use in potentially

hazardous situations.

Precaution

 Do not use headphones while operating a motorized vehicle;

the use of headphones may create a traffic hazard and is illegal in many areas.

Important safety information

WARNING

Do not ingest the battery, Chemical Burn Hazard (The remote control supplied with) This product contains a coin/ button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

WARNING

 Do not attempt to install or service this product by yourself.

Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.

 Do not allow this product to come into contact with liquids.

Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.

 If liquid or foreign matter should get inside this product,

park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.

 If you notice smoke, a strange noise or odor from this

product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.

 Do not disassemble or modify this product, as there

are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal inspection, adjustments or repairs.

Before using this product, be sure to read and fully understand the following safety information:

 Do not operate this product, any applications, or the rear

view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.

 Never set the volume of this product so high that you cannot

hear outside traffic and emergency vehicles.

 To promote safety, certain functions are disabled unless the

vehicle is stopped and/or the parking brake is applied.

 Keep this manual handy as a reference for operating proce-

dures and safety information.

 Do not install this product where it may (i) obstruct the

driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.

 Please remember to fasten your seat belt at all times while

operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.

 Never use headphones while driving.

CAUTION

This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065.

Parking brake interlock

Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/ or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place, and (1) apply the parking brake, (2) release the parking brake, and then (3) apply the parking brake again. Please keep the brake pedal pushed down before releasing the parking brake.

To ensure safe driving

WARNING

 LIGHT GREEN LEAD AT POWER CONNECTOR

IS DESIGNED TO DETECT PARKED STATUS

AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.

 Do not take any steps to tamper with or disable the

parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.

 To avoid the risk of damage and injury and the

potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.

 In some countries the viewing of video image on a display

inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed.

If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake.

When using a display connected to V OUT

The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images.

WARNING

NEVER install the rear display in a location that enables the driver to watch video images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.

WARNING

Do not install this product in a vehicle that does not have an ACC wire or circuitry available.

Rear view camera

With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot.

X0000BT

Precaution

WARNING

 SCREEN IMAGE MAY APPEAR REVERSED.  USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE

REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.

CAUTION

The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes.

Handling the USB connector

CAUTION

 To prevent data loss and damage to the storage device,

never remove it from this product while data is being transferred.

 Pioneer cannot guarantee compatibility with all USB mass

storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.

Failure to operate

After-sales service for Pioneer products

Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact.

 USA

Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760

800-421-1404 For warranty information, please see the Limited Warranty sheet included with your product.

Visit our website

Visit us at the following site:

http://www.pioneerelectronics.com

1 Register your product. 2 Receive updates on the latest products and technologies. 3 Download owner’s manuals, order product catalogs,

research new products, and much more.

4 Receive notices of software upgrades and software updates.

Protecting the LCD panel and screen

 Do not expose the LCD screen to direct sunlight when this

product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.

 When using a cellular phone, keep the antenna of the cel-

lular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.

 To protect the LCD screen from damage, be sure to touch the

touch panel keys only with your finger and do so gently.

Notes on internal memory

Before removing the vehicle battery

 Some of the settings and recorded contents will not be reset.

Data subject to erasure

The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself).

 Some of the settings and recorded contents will not be reset.

Resetting the microprocessor

CAUTION

Pressing the RESET button resets settings and recorded contents to the factory settings.

 Do not perform this operation when a device is connected

to this product.

 Some of the settings and recorded contents will not be

reset. The microprocessor must be reset under the following conditions:

 Prior to using this product for the first time after installation.  If this product fails to operate properly.  If there appears to be problems with the operation of the

system.

 If your vehicle position is shown on the map with a signifi-

cant positioning error.

1 Turn the ignition switch OFF. 2 Press the RESET button with a pen tip or other

pointed implement.

 Refer to Checking part names and functions on page 7 Settings and recorded contents are reset to the factory settings.

About this manual

This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used.

Meanings of Symbols Used in This Manual

This indicates model name that are supported the described operations.

This indicates to touch an appropriate soft key on the touch screen.

HOLD

This indicates to touch and hold an appropriate soft key on the touch screen.

This indicates that there is a reference or supplementary for the key or screen.

Use and care of the remote control

Installing the battery

Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (–) poles aligned properly.

 When using for the first time, pull out the film protruding

from the tray.

123 4 5678

97 1

Precaution Basic operation

WARNING

 Do not ingest the battery, Chemical Burn Hazard.  This product, including the supplied remote control,

contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.

 Keep new or used batteries out of the reach of children.

If the battery is swallowed or placed inside any part of the body, consult a doctor immediately.

 If the battery compartment does not close securely, stop

using the product and keep it away from children.

 Batteries (battery pack or batteries installed) must not be

exposed to excessive heat such as sunshine, fire or the like.

CAUTION

 Remove the battery if the remote control is not used for a

month or longer.

 There is a danger of explosion if the battery is incorrectly

replaced. Replace only with the same or equivalent type.

 Do not handle the battery with metallic tools.  Do not store the battery with metallic objects.  If the battery leaks, wipe the remote control completely

clean and install a new battery.

 When disposing of used batteries, please comply with

governmental regulations or environmental public institutions’ rules that apply in your country/area.

 “Perchlorate Material – special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”

Using the remote control

Point the remote control in the direction of the front panel to operate.

 The remote control may not function properly in direct

sunlight.

Important

 Do not store the remote control in high temperatures or

direct sunlight.

 Do not let the remote control fall onto the floor, where it

may become jammed under the brake or gas pedal.

Checking part names and functions

X490BS

X390BS

2 5

4 3

1 LCD screen 2 Volume (+/–) button 3 DISP

button

5 MODE

button

TRK ( / ) button

7 8 RESET

button

9 Disc-

loading slot

On the AV operation screen, press to turn the display off. On the Application screen or navigation mode, press to display the side control bar. Press and hold to turn the display off. p When the display is turned off, touch the

screen to revert to the original screen.

Press to display the top menu screen.

button

Press and hold to activate the voice recognition function.

 Refer to Using the voice recognition func-

tion (for iPhone) on page 15

Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode.

Press to return to the previous track (chapter) or go to the next track (chapter). Press and hold to perform fast reverse or fast forward. Press to answer or end a call.

button

 Refer to Resetting the microprocessor on

page 6

 Refer to Inserting and ejecting a disc on

page 8

Remote control

123

4 5

Basic operation

1 Volume (+/–) 2

5 6 Thumb

7 8 AUDIO

MODE

SRC

TOP MENU

pad

MUTE

SUBTITLE ANGLE

BAND/ ESC

RETURN

FOLDER/P. CH

Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode.

Press to cycle through all the available sources. Press and hold to turn the source off.

Returns to the top menu during DVD playback.

Displays the DVD menu during DVD playback. Selects a menu on the DVD menu.

Changes the audio language, subtitle language or viewing angle during DVD playback.

Selects the tuner band when tuner is selected as a source. Cancels the control mode of functions. Switches between media file types when playing the data of Disc, USB.

Returns to the specified point and begins playback from there.

Pauses or resumes playback. For audio: Press and hold to perform fast

reverse or fast forward. For video: Press to perform fast reverse or fast forward.

Press to return to the previous track (chapter) or go to the next track (chapter). Press to answer or end a call.

Stops playback. If you resume playback, playback will start from the point where you stopped. Touch the key again to stop playback completely.

Selects the next or previous disc or folder. Recalls radio station frequencies assigned to preset channel keys.

Notes on using the LCD panel

WARNING

Do not use with the LCD panel left open. It may result in injury in the event of an accident.

CAUTION

 Keep hands and fingers clear of this product when

opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.

 Do not open or close the LCD panel by force. It may cause

a malfunction.

 Do not operate this product until the LCD panel has

completely opened or closed. The LCD panel may stop at that angle for safety.

 Do not place a glass or can on the open LCD panel.

Adjusting the LCD panel angle

X490BS

1 Press the button. 2 Touch

LCD panel.

3 Touch

Returns to the previous screen.

or to adjust the angle of the

Inserting/ejecting/connecting media

CAUTION

Do not insert anything other than a disc into the disc-loading slot.

Inserting and ejecting a disc

Inserting a disc

X490BS

1 Press the button. 2 Touch 3 Insert a disc into the disc-loading slot.

to open the LCD panel.

Ejecting a disc

X490BS

1 Press the button. 2 Touch 3 Remove the disc, and press the

to open the LCD panel.

button.

Inserting a disc

X390BS

1 Insert a disc into the disc-loading slot.

Ejecting a disc

X390BS

1 Press button to eject a disc.

Plugging and unplugging a USB storage device

p This product may not achieve optimum performance with

some USB storage devices.

p Connection via a USB hub is not possible. p A USB cable is required for connection.

1 Pull out the plug from the USB port of the USB

cable.

2 Plug a USB storage device into the USB cable.

1 USB cable 2 USB storage device

Check that no data is being accessed before pulling out the

USB storage device.

On rst-time startup

1 Start the engine to boot up the system.

The “Select Program Language” screen appears.

Basic operation

p From the second time on, the screen shown will differ

depending on the previous conditions.

2 Touch the language. 3 Touch

The “Speaker Mode Settings” screen appears.

4 Touch the speaker modes.

 Standard Mode

4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers.

 Network Mode

3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands).

WARNING

Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to this unit. This may cause damage to the speakers.

5 Touch [OK].

The “Smartphone Setup” screen appears.

6 Touch the item.

 Refer to Information on the connections and functions for

each device on page 17

7 Touch .

The top menu screen appears. p Once the speaker mode is set, the setting cannot be

changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting.

 Refer to Restoring the default settings on page 49

Switching the speaker mode

To change the speaker mode, you need to restore this product to the default settings.

1 Restore the default setting.

 Refer to Restoring the default settings on page 49

Time and date setting screen

Application menu screen

Basic operation

How to use the screens

AbcdefgAbcdefg AbcdefgAbcdefg Abcdefg

Depending on the connection method, the "smartphone setup" screen is displayed.

Application operation screen

Source Select

You can control the iPhone or smartphone applications directly on this product.

AbcdefgAbcdefg

10 620162148

Month/Date d/m/y

Time Format

6/10

4821

Top menu screen

m/d/yy/m/d

12hour 24hour

4821

6/10

4821

iPod

Setting menu screen

System

AV operation screen

6/10

iPod

Abcdefghi

ABC

Pops

9999’99” -9999’99”

99999/99999

4821

Phone menu screen

abcdefghi...

ABC

A B

C D E F G

Favorite source icons Recent application icons

AV source selection screen

6/10

4821

Disc PandoraAUX iPod

Bluetooth

SiriusXM AV

Spotify

Power

SourceOFF

OFF

Camera

Audio

HD Radio

View

Phone Book

abcdefghi

Basic operation

The top menu screen of this manual is the screen when using the AppRadioOne. The items displayed on the screen may vary depending on the connecting device or mode. When you connect an iPhone via Bluetooth wireless technology or a smartphone via USB cable, “Smartphone Setup” screen appears by touching [APPS].

By pressing the button on any screen you can display the Top menu screen.

When you connect the external navigation system to this unit, the navigation mode key is displayed at the left bottom of the display.

By pressing the MODE button you can switch between the Application screen and the AV operation screen.

If you select “Power OFF”, you can turn off almost all functions. The “Power OFF” mode is released in the following cases:

 An incoming call is received.  A rear view camera image is input when the

vehicle reverses.

 A button on this product is pressed.  The ignition switch is turned off (ACC OFF), then

turned on (ACC ON).

Supported AV source

You can play or use the following sources with this product.

 Radio  CD  ROM (compressed audio files)  DVD-Video  USB

The following sources can be played back or used by connecting an auxiliary device.

 iPod

 Spotify  Pandora  Bluetooth audio  SiriusXM  AV input (AV)  AUX

Satellite Radio

Displaying the AV operation screen

1 Press . 2 Touch the AV operation key.

The AV operation screen appears.

6/10

4821

iPod

Abcdefghi

ABC

1 Displays the source list.

Pops

9999’99” -9999’99”

99999/99999

Selecting a source

Source on the AV source selection screen

1 Display the “AV source selection” screen.

2 Touch the source icon.

p When you select “Source OFF”, the AV source is turned off.

Source on the source list

1 Display the source list.

 Refer to Displaying the AV operation screen on page 11

2 Touch the source key.

p When you select “Source OFF”, the AV source is turned off.

Changing the display order of sources

Changing the display order of source icons

1 Display the “AV source selection” screen.

2 Touch and hold a source icon, and drag the icon

to the desired position.

Changing the display order of source keys

1 Display the source list.

 Refer to Displaying the AV operation screen on page 11

2 Touch . 3 Drag the source key to the desired position.

Using the touch panel

You can operate this product by touching the keys on the screen directly with your fingers. p To protect the LCD screen from damage, be sure to touch the

screen only with your finger gently.

Common touch panel keys

 : Returns to the previous screen.

: Closes the screen.



1 2

Basic operation Registration and connection of

Operating list screens

Songs

abcdefghi

Playlist

Music

Artist

abcdefghi

Alburm

abcdefghi

Songs

Video

1 Touching an item on the list allows you to narrow down the

options and proceed to the next operation.

2 Appears when all characters are not displayed on the display

area. If you touch the key, the rest are scrolled for display.

3 Appears when items cannot be displayed on a single page.

Drag the slider bar or the list to view any hidden items.

Podcast

abcdefghi

Operating the time bar

9999’99” -9999’99”

1 You can change the playback point by dragging the key.

p Playback time corresponding to the position of the key is

displayed while dragging the key.

Switching the operation panel

1 Touch .

The hidden function keys appears. p This key does not appear for some AV sources.

Bluetooth® device

Displaying the “Bluetooth” screen

1 Press . 2 Touch

The “Bluetooth” screen appears.

Registering your Bluetooth devices

p If three devices are already paired, “Memory Full” is dis-

played. Delete a paired device first.

 Refer to Deleting a registered device on page 12

1 Activate the Bluetooth wireless technology on

your devices.

2 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

3 Touch [Connection]. 4 Touch

The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found.

5 Touch the Bluetooth device name.

After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list. p If your device supports SSP (Secure Simple Pairing), a six-

digit number appears on the display of this product. Touch [Yes ] to pair the device.

p The Bluetooth connection can be also made by detecting

this product from the Bluetooth device. Before registration, make sure that “Visibility” in the “Bluetooth” menu is set to “On”. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.

 Refer to Switching visibility on page 13

p Two cellular phones can be connected to this product at the

same time.

 Refer to Switching the connected Bluetooth device on page

p If you try to connect an unconnected cellular phone while

two cellular phones are already connected, the first one of the two connected cellular phones will be disconnected and the unconnected cellular phone will be connected instead.

, and then .

Setting Bluetooth device auto connection

This function connects the last connected Bluetooth device to this product automatically as soon as the two devices are less than a few meters apart. The default setting is “On”. p If two Bluetooth devices were connected the last time, the

two devices are connected to this product automatically in the order that they are registered in the device list.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Auto Connect] to switch “On” or “Off”.

Deleting a registered device

CAUTION

Never turn this product off while the paired Bluetooth device is being deleted.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Connection]. 3 Touch

Connecting a registered Bluetooth device manually

Connect the Bluetooth device manually in the following cases:

 Two or more Bluetooth devices are registered, and you want

to manually select the device to be used.

 You want to reconnect a disconnected Bluetooth device.  Connection cannot be established automatically for some

reason.

1 Activate the Bluetooth wireless technology on

your devices.

2 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

3 Touch [Connection]. 4 Touch the name of the device.

p To disconnect the device, touch the name of the connected

device in the list.

Registration and connection of Bluetooth® device

Switching visibility

This function sets whether or not to make this product visible to the other device. The default setting is “On”.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Visibility] to switch “On” or “Off”.

Entering the PIN code for Bluetooth wireless connection

To connect your Bluetooth device to this product, you need to enter a PIN code. You can change the PIN code with this function. p The default PIN code is “0000”.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [PIN Code Input]. 3 Touch [0] to [9] to input the pin code (up to

8 -digits).

4 Touch

Displaying the device information

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Device Information].

The device name and address of the Bluetooth device on this product are displayed.

Clearing the Bluetooth memory

p This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

CAUTION

Never turn this product off while the Bluetooth memory is being cleared.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Bluetooth Memory Clear].

3 Touch [Clear].

The confirmation screen appears.

Updating Bluetooth software

This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website. p The source is turned off and the Bluetooth connection is

disconnected before the process starts.

p This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

p You need to store the version update file to the USB storage

device in advance.

CAUTION

Never turn this product off and never disconnect the phone while the software is being updated.

1 Connect the USB storage device stored the ver-

sion update file to this unit.

 Refer to Plugging and unplugging a USB storage device on

page 8

2 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

3 Touch [BT Software Update]. 4 Touch [Start].

Follow the on-screen instructions to finish updating the Bluetooth software.

Displaying the Bluetooth software version

If this product fails to operate properly, you may need to consult your dealer for repair. In such cases, perform the following procedure to check the software version on this unit.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Bluetooth Version Information].

The version of this product’s Bluetooth module appears.

Switching the connected Bluetooth device

After registering and connecting the Bluetooth devices to this product, you can switch among the devices using the switch devices key in the phone function and some audio sources. p You can register up to three Bluetooth devices on this

product.

 Refer to Registering your Bluetooth devices on page 12

p You can connect one of the registered devices to this prod-

uct. In cases where the registered device is equipped with a phone function, a total of two devices can be connected at the same time when using the phone function. If two of the three registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen.

p The icon for the cellular phone currently being used is

displayed on the “Phone menu” screen. If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. The contents of the phone menu are memorized for each connected cellular phone.

 Refer to Hands-free phoning on page 14

p The switch devices key will appear for some audio sources.

The audio source may automatically switch to another source depending on the selected device.

Switches the search language to

Synchronizes the contacts on this

Hands-free phoning

product's phone book with the contacts on your phone manually.

Phone Book

abcdefghi

abcdefghi...

English or system language.

Switches to the preset dial screen.  Refer to Using the preset dial lists on page 14

Switches to the phone book list.

 Refer to Calling a number in the phone book on

page 14

Switches to the missed, received and dialed call lists.  Refer to Dialing from the histor y on page 14

Switches the mode to enter the phone number directly.  Refer to Direct dialing on page 14

Switches to the voice recognition function (for iPhone).

 Refer to Using the voice recognition function (for

iPhone) on page 15

If you connect two cellular phones to this product at

ABC

A B

C D E F G

the same time, you can switch between the cellular phones using the switch devices key. The following items are displayed on the key.

 Name of the current cellular phone  List number of the current cellular phone  Battery status of the current cellular phone  Reception status of the current cellular phone

 Refer to Switching the connected Bluetooth device

on page 13

CAUTION

For your safety, avoid talking on the phone as much as possible while driving.

To use this function you need to connect your cellular phone to this product via Bluetooth in advance.  Refer to Registration and connection of Bluetooth

page 12

device on

Displaying the Phone menu screen

1 Press . 2 Touch

The Phone menu screen appears.

Making a phone call

You can make a phone call in many different ways.

Direct dialing

1 Display the “Phone menu” screen.

 Refer to Displaying the Phone menu screen on page 14

2 Touch . 3 Touch the number keys to enter the phone

number. 4 Touch 5 Touch

p You may hear a noise when you hang up the phone.

to make a call. to end the call.

Calling a number in the phone book

p The contacts on your phone will be automatically transferred

to this product.

p “Visibility” of the “Bluetooth” screen should be on.

 Refer to Switching visibility on page 13

p If two cellular phones are automatically connected to this

product with the Bluetooth device auto connect function, the phone book of the second phone is displayed.

1 Display the “Phone menu” screen.

 Refer to Displaying the Phone menu screen on page 14

2 Touch . 3 Touch the desired name on the list. 4 Touch the phone number.

The dial screen appears and dialing starts.

5 Touch to end the call.

Dialing from the history

1 Display the “Phone menu” screen.

 Refer to Displaying the Phone menu screen on page 14

2 Touch . 3 Touch the item to switch the history list.

The following items are available:

: Received call list



: Dialed call list



: Missed call list



4 Touch the desired entry on the list to make a

call.

The dial screen appears and dialing starts.

5 Touch to end the call.

Using the preset dial lists

Registering a phone number

You can easily store up to six phone numbers per device as presets.

1 Display the “Phone menu” screen.

 Refer to Displaying the Phone menu screen on page 14

2 Touch or .

On the “Phone Book” screen, touch the desired name to display the contact’s phone number.

Hands-free phoning

3 Touch .

Dialing from the preset dial list

1 Display the “Phone menu” screen.

 Refer to Displaying the Phone menu screen on page 14

2 Touch . 3 Touch the desired item.

The dial screen appears and dialing starts.

Receiving a phone call

p When two phones are connected at the same time, if an

incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed.

1 Touch to answer the call.

 If you touch

can switch to the talking person.

 Touch

2 Touch

while getting a call waiting, you

to reject the call.

to end the call.

Minimizing the dial conrmation screen

p The dial confirmation screen cannot be minimized on the AV

operation screen.

p AV sources cannot be selected even if the dial confirmation

screen is minimized while talking on the phone or receiving an incoming call.

1 Touch .

 Touch

again.

to display the dial confirmation screen

Changing the phone settings

Setting auto answering

You can select whether or not to answer a call automatically. The default setting is “Off”. p Even if an incoming call is received on the other connected

phone while you are talking on the phone, the incoming call will not be answered automatically.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Auto Answer] to switch “On” or “Off”.

Switching the ring tone

You can select whether or not to use this product’s ring tone. The default setting is “On”.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Ring Tone] to switch “On” or “Off”.

Inverting names in the phone book

You can use this function to change the order of the first and last names in the phone book.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Invert Name].

Setting the private mode

During a conversation, you can switch to private mode (talk directly on your cellular phone).

1 Touch or to turn private mode on or

off.

p If two cellular phones are connected to this product and the

first phone is set to private mode, you can receive incoming

calls on the second phone while maintaining the call in prog-

ress on the first phone.

p When two cellular phones are connected to this product

and private mode of the first phone is turned off, if an incom-

ing call on the second phone is answered while a call is in

progress on the first phone or while dialing or receiving a

call on the first phone, the call, dialing, or receiving on the

first phone is ended.

Adjusting the other party’s listening volume

This product can be adjusted to the other party’s listening volume.

1 Touch to switch between the three vol-

ume levels.

Using the voice recognition function (for iPhone)

By connecting your iPhone to this product, you can use the voice recognition function (Siri Eyes Free Mode) on this product. p When an iPhone running iOS 6.1 or higher is used, Siri Eyes

Free Mode is available with this product.

p In this chapter, iPhone and iPod touch will be referred to as

“iPhone”.

1 Display the “Phone menu” screen.

 Refer to Displaying the Phone menu screen on page 14

2 Touch .

The voice recognition function launches and the voice control screen appears. p You can also launch the voice recognition function by press-

ing and holding

p If two cellular phones are automatically connected to this

product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone.

p If you want to use the voice recognition function (Siri Eyes

Free Mode) on another connected iPhone, touch to switch to the other iPhone. The iPhone that you switch to will be set as the current device.

Setting phone book auto synchronization

You can select whether or not to synchronize the the phone book with the contacts on your phone automatically when you connect the phone to this product. The default setting is “Off”.

1 Display the “Bluetooth” screen.

 Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Phone Book Auto Synchronize] to

switch “On” or “Off”.

Notes for hands-free phoning

General notes

 Connection to all cellular phones featuring Bluetooth wire-

less technology is not guaranteed.

 The line-of-sight distance between this product and your

cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.

Hands-free

Setup for iPod / iPhone or smartphone

phoning

 With some cellular phones, the ring sound may not be

output from the speakers.

 If private mode is selected on the cellular phone, hands-free

phoning may be disabled.

Registration and connection

 Cellular phone operations vary depending on the type of cel-

lular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.

 When phone book transfer does not work, disconnect your

phone and then perform pairing again from your phone to this product.

Making and receiving calls

 You may hear a noise in the following situations:

— When you answer the phone using the button on the

phone.

— When the person on the other end of the line hangs up the

phone.

 If the person on the other end of the line cannot hear the

conversation due to an echo, decrease the volume level for hands-free phoning.

 With some cellular phones, even after you press the accept

button on the cellular phone when a call comes in, handsfree phoning may not be performed.

 The registered name will appear if the phone number is

already registered in the phone book. When one phone number is registered under different names, only the phone number will be displayed.

The received call and the dialed number histories

 You cannot make a call to the entry of an unknown user (no

phone number) in the received call history.

 If calls are made by operating your cellular phone, no history

data will be recorded in this product.

Phone book transfers

 If there are more than 1 000 phone book entries on your cel-

lular phone, not all entries may download completely.

 Depending on the phone, this product may not display the

phone book correctly.

 If the phone book in the phone contains image data, the

phone book may not be transferred correctly.

 Depending on the cellular phone, phone book transfer may

not be available.

When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device.

The basic ow of iPod / iPhone

or smartphone setup

1 Select the method for connecting your device.

 Refer to Setting the device connection method on page 16 2 Connect your device to this product.  Refer to Connection on page 50 3 If necessary, connect your device to this product via Bluetooth connection.  Refer to Registration and connection of Bluetooth on page 12

device

Setting the device connection method

To use the application for iPhone or smartphone on this product, select the method for connecting your device. Settings are required according to the connected device.

1 Display the “System” setting screen.

2 Touch [Input/Output settings]. 3 Touch [Smartphone Setup]. 4 Touch the following settings.

 Device: Select the device to be connected.  Connection / Application: Select the connection method.

 Refer to Information on the connections and functions for

each device on page 17

The setting will change after the following processes are

automatically executed.

— The source is turned off. — AppRadioOne is exited. — The smartphone connection (USB and Bluetooth) is

disconnected.

iPod compatibility

This product supports only the following iPod models and iPod software versions. Others may not work correctly.

 iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus: iOS 7.0 or later.  iPhone 3GS: iOS 6.0.1  iPod touch (4th, 5th generation): iOS 6.0.1  iPod touch (3rd generation): iOS 5.1.1  iPod touch (2nd generation): iOS 4.2.1  iPod classic 160GB (2009): Ver. 2.0.4  iPod classic 160GB (2008): Ver. 2.0.1  iPod classic 80GB: Ver. 1.1.2  iPod nano (7th generation)  iPod nano (6th generation): Ver. 1.2  iPod nano (5th generation): Ver. 1.0.2  iPod nano (4th generation): Ver. 1.0.4  iPod nano (3rd generation): Ver. 1.1.3

p You can connect and control an iPod compatible with this

product by using separately sold connector cables.

p Operation methods may vary depending on the iPod model

and the software version.

p Depending on the software version of the iPod, it may not be

compatible with this product. For details about iPod compatibility with this product, refer to the information on our website.

This manual applies to the following iPod models.

iPod with 30-pin connector

 iPhone 3GS, 4, 4s  iPod touch 2nd, 3rd, 4th generation  iPod classic 80GB, 160GB  iPod nano 3rd, 4th, 5th, 6th generation

iPod with Lightning connector

 iPhone 6, 6 Plus  iPhone 5, 5c, 5s  iPod touch 5th generation  iPod nano 7th generation

Android™ device compatibility

p Operation methods may vary depending on the Android

device and the software version of the Android OS.

p Depending on the version of the Android OS, it may not be

compatible with this product. p Compatibility with all Android devices is not guaranteed. For details about Android device compatibility with this product, refer to the information on our website.

Setup for iPod / iPhone or smartphone

Information on the connections and functions for each device

The settings and cables required for connecting each device, and the available sources are as follows.

iPod / iPhone with a 30-pin connector

Device connection method When connecting via Bluetooth When connecting via CD-IU201V (sold

Smartphone Setup Device

Connection Wireless via BT USB USB

Bluetooth connection Bluetooth connection is required. — — Available sources iPod (audio)

iPod (video) — Pandora Spotify

iPhone / iPod iPhone / iPod iPhone / iPod

  

separately)



iPod / iPhone with a Lightning connector

Device connection method When connecting via Bluetooth When connecting via CD-IU52 (sold separately)

Smartphone Setup Device

Connection Wireless via BT USB

Bluetooth connection Bluetooth connection is required. — Available sources iPod (audio)

iPod (video) — — Pandora Spotify AppRadioOne

iPhone / iPod iPhone / iPod

 

—



Android device

Device connection method When connecting via Bluetooth When connecting via CD-MU200 (sold separately)

Smartphone Setup Device Others Others

Bluetooth connection Bluetooth connection is required. — Available sources

Application

Pandora Spotify AppRadioOne

USB/MTP



—

AppRadioOne

—



When “Application” of “Smartphone Setup” is set to

“AppRadioOne”.

When connecting via CD-IU51 (sold separately)

—

Releasing the key in a few seconds, skips

Displays the preset channel list.

Radio

Select an item on the list ("1" to "6") to switch to the preset channel.

Selects the FM1, FM2, FM3 or AM band.

Radio

2 3

AMFM1

Abcdefghi

Abcdefghi Abcdefghi

000.00

Performs manual tuning. Performs seek tuning or

HOLD

non stop seek tuning.

to the nearest station from the current frequency. Keeping holding the key for a long seconds, performs non stop seek tuning.

Recalls the preset channel stored to a key from memory.

Stores the current broadcast

HOLD

frequency to a key.

Stores song information to an iPod.

 Refer to Storing song information to an iPod

(iTunes Tagging) on page 48

p By pressing

channels.

p By pressing and hold

also perform seek tuning.

MHz

or , you can also switch the preset

or and release, you can

6/10

p By keeping touching and holding

non stop seek tuning. Touch again to cancel.

or , you can per form

Starting procedure

1 Display the “AV source selection” screen.

4821

2 Touch [Radio].

The “Radio” screen appears.

3 Touch [Radio settings]. 4 Touch [Local]. 5 Touch the item.

 Off (default):

Turns the seek tuning setting off.

 Level1 to Level4:

Sets the level of sensitivity for FM to Level1 to Level4 (for

AM Level1 or Level2). p The FM “Level4” (AM “Level2”) setting allows reception of

only stations with the strongest signals.

Storing the strongest broadcast frequencies

The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6”. p Storing broadcast frequencies with BSM may replace those

you have already saved.

p Previously stored broadcast frequencies may remain stored

if the number of frequencies stored has not reached the limit.

1 Touch . 2 Touch

While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys in order of their signal strength.

 If you touch [Cancel], the storage process is

canceled.

to begin a search.

Tuning into strong frequencies

p This setting is available only when “Radio” is selected as the

source. Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals.

1 Display the “System” setting screen.

2 Touch [AV Source Settings].

Track number indicator

Audio source screen

HOLD

Video source screen 2

Disc

ẂTrack 99

Switches between playback and pause.

Plays files in random order.

This function is available for music CD.

ẂTrack 99

6/10

4821

9999’99” -9999’99”

Pause

Skips files forward or backward.

: Does not play tracks in random order.

: Plays all tracks in random order.

6/10

4821

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

Performs frame-by-frame playback.

Performs slow-motion playback.

Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2

Video source screen 1

6/10

4821

DVD

Stop 99 99

9999’99” -9999’99”

Performs fast reverse or fast forward.

Touch again to change play back the speed.

Stops playback.

ᵫᵮᵣᵥᵋᵟ ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ

ᵫᶓᶊᶒᶇᴾᶁᶆ

Pause

OFFFull 01

6/10

4821

DVD

Stop 99 99

L+R

9999’99” -9999’99”

Sets a repeat play range.

: Repeats all files.

ᵏᵍᵐ

: Repeats the current chapter.

: Repeats the current title.

Changes the viewing angle (Multi-angle).

This function is available for DVDs featuring multi-angle recordings.

Selects the audio output from [L+R], [Left], [Right], [Mix].

This function is available for Video-CDs and DVDs recorded with LPCM audio.

ᵫᵮᵣᵥᵋᵟ ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ

ᵫᶓᶊᶒᶇᴾᶁᶆ

Pause

ᵰᶃᶒᶓᶐᶌ

ᵐᵍᵐ

Sets a repeat play range.

: Repeats the current disc.

: Repeats the current track.

Video source screen 2

control).

Disc

DVD

Stop 99 99

L+R

Resumes playback (Bookmark).

This function is available for DVD-Video. You can memorize one point as a

Bookmark for a disc (up to five discs). To clear the bookmark on the disc, touch and hold this key.

Returns and begins playback from the specified point.

This function is available for DVD-Video and Video-CDs featuring PBC (playback

Selects a track from the list.  Refer to Selecting files from the file name list on

page 20

Switches the media file type.  Refer to Switching the media file type on page

Searches for the part you want to play.  Refer to Searching for the part you want to play on

page 20

Displays the DVD menu.  Refer to Operating the DVD menu on page 20

6/10

ᵫᵮᵣᵥᵋᵟ ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ

9999’99” -9999’99”

ᵫᶓᶊᶒᶇᴾᶁᶆ

Pause

4821

ᵰᶃᶒᶓᶐᶌ

Switches the subtitle/audio language.  Refer to Switching the subtitle/audio language on

page 20

Displays the DVD menu keypad.

 Refer to Operating the DVD menu using touch

panel keys on page 20

p By pressing

forward or backward.

ᵐᵍᵐ

p By pressing and holding

fast reverse or fast forward.

p If a Video-CD with PBC On is being played, p You can set the screen size for the video image.

 Refer to Common operations on page 48

or , you can also skip files/chapters

or , you can also perform

appears.

Switches the media file type to CD (audio data (CD-DA)).

Searching for the part you want to play

p For DVD-Videos, you can select [Title], [Chapter] or [10Key]. p For Video-CDs, you can select [Track] or [10Key] (PBC only).

1 Touch . 2 Touch the item to select the search function. 3 Touch [0] to [9] to input the desired number.

p To cancel an input number, touch [C].

4 Touch to start playback from the number

you registered.

Starting procedure

You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product.

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.

1 Insert the disc.

The source changes and then playback will start.  Refer to Inserting and ejecting a disc on page 8 p If the disc is already set, select [Disc] as the playing source.

Selecting les from the le

name list

1 Touch . 2 Touch a track on the list to play back.

Switching the media le type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch . 2 Touch the item.

 Music:

Switches the media file type to music (compressed audio).

 Video:

Switches the media file type to video.

 CD-DA:

Operating the DVD menu

You can operate the DVD menu by touching the menu item on the screen directly. p This function may not work properly with some DVD disc

content. In that case, use touch panel keys to operate the DVD menu.

1 Touch or . 2 Touch the desired menu item.

Switching the subtitle/audio language

1 Touch or to change the language.

 : Changes the subtitle language.

: Changes the audio language.



p You can also switch the subtitle/audio languages using the

“DVD/DivX Setup” menu.

 Refer to Setting the top-priority languages on page 46

Operating the DVD menu using touch panel keys

If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using those touch panel keys.

1 Touch . 2 Touch

menu item.

, , or to select the desired

Audio source screen 1 (Example: USB)

Audio source screen 2 (Example: USB)

Disc Compressed les

3 Touch .

p The way to display the menu differs depending on the disc.

 If you touch , you can operate the DVD menu

directly.

6/10

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ

USB

Abcdefghi

ABC

R&B

9999’99” -9999’99”

Skips files forward or backward.

Switches between playback and pause.

Switches the current music information display.

4821

USB

Abcdefghi

: Does not play files in random order.

: Plays all files within the repeat

range in random order.

6/10

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ

Abcdefghi

ABC

R&B

4821

Sets a repeat play range.

Plays files in random order.

or : Repeats all files.

: Repeats the current folder.

: Repeats the current file.

Selects the previous folder or the next folder.

Constructs the database for using the Music Browse mode.

This function is available only for USB.

Video source screen (Example: Disc)

Compressed les

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

Video source screen (Example: Disc)

6/10

ROM

Stop

Abcdefghi

Performs frame-by-frame playback.

HOLD

Performs slow-motion playback.

Stops playback.

Abcdefghi

9999’99” -9999’99”

Pause

Sets a repeat play range.

or : Repeats all files.

: Repeats the current folder.

: Repeats the current file.

Hides the touch panel keys.

6/10

4821

ROM

4821

OFFFull01

Stop

Abcdefghi

9999’99” -9999’99”

Pause

Performs fast reverse or fast forward.

Touch again to change the playback speed.

Switches between playback and pause.

OFFFull 01

Still image screen

USB

Abcdefghi

Trimming

To display again the keys, touch anywhere on the screen.

Rotates the displayed picture 90° clockwise.

Selects the previous or next folder.

6/10

Abcdefghi

4821

Sets a repeat play range.

: Repeats all files.

: Repeats the current folder.

Plays files in random order.

: Does not play files in random order.

: Plays all files in the current repeat

play range in random order.

playback and pause.

Still image screen

Compressed les

Displays the MIXTRAX screen.  Refer to MIXTRAX on page 37

Displays the link search screen. This function is available for the USB storage device only.  Refer to Selecting a song from the list related to

Selects a file from the list.  Refer to Selecting files from the file name list on

p When you play compressed audio files stored in

 Refer to Selecting a file using Music Browse mode

Switches the media file type.  Refer to Switching the media file type on page

6/10

4821

USB

Abcdefghi

Trimming

Switches between

the song currently playing (link search) on page 24

page 23

a USB storage device, you can search for a file using Music Browse.

on page 23

Abcdefghi

Skips files forward or backward.

Switches the subtitle/audio language. This function is available only for compressed video files stored on a disc.  Refer to Switching the subtitle/audio language on

page 20

Saves the current image as the wallpaper.  Refer to Saving the image as the wallpaper on

page 24

You can play compressed audio, compressed video or still image files stored in a disc or a USB storage device.  Refer to Media compatibility chart on page 61 p By pressing

backward. p By pressing and holding

reverse or fast forward. p By pressing and holding

you can search through 10 JPEG files at a time. If the file

currently being played is the first or last file in the folder, the

search is not performed.

p JPEG images are not displayed in the rear display. p You can set the screen size for the video and JPEG images.

 Refer to Common operations on page 48

or , you can also skip files forward or

or , you can perform fast

or on the still image file,

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.

Starting procedure (for Disc)

1 Insert the disc.

The source changes and then playback will start.  Refer to Inserting and ejecting a disc on page 8 p If the disc is already set, select [Disc] as the playing source.

Starting procedure (for USB)

1 Display the “AV source selection” screen.

2 Plug the USB storage device.

 Refer to Plugging and unplugging a USB storage device on

page 8

3 Touch [USB].

p Play back is performed in order of folder numbers. Folders

are skipped if they contain no playable files.

Operations common to all le

types

Selecting les from the le name list

You can find files or folders to play back using the file name or folder name list.

1 Touch . 2 Touch a file on the list to play back.

p Touching a folder on the list shows its contents. You can play

a file on the list by touching it.

Switching the media le type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch . 2 Touch the item.

 Music:

Switches the media file type to music (compressed audio).

 Video:

Switches the media file type to video.

 CD-DA:

Switches the media file type to CD (audio data (CD-DA)).

 Photo:

Switches the media file type to still image (JPEG data).

Audio le operations

Selecting a le using Music Browse

mode

You can select files to play back using the category list if the files contain tag information. p This function is available for the USB storage device only.

1 Touch DB to create a database.

Music Browse mode will be available after the database has been created.

2 Touch . 3 Touch the desired category to display the file

list.

Audio source screen 1

Compressed les iPod

4 Touch the item.

Refine the item until the desired song title or file name is displayed on the list.

5 Touch the desired song title or file name to

play back.

p If the selection made with Music Browse has been canceled,

you can switch to Music Browse mode again by touching the [Tag ] tab on the file/folder list screen and touching the desired track.

Selecting a song from the list related to the song currently playing (link search)

p If you touch the artwork, the list of songs in the album is

displayed.

p This function is available for the USB storage device only.

1 Switch to Music Browse mode.

 Refer to Selecting a file using Music Browse mode on page

2 Touch song information to open the list of

songs.

3 Touch the song to play back.

Still image le operations

Saving the image as the wallpaper

You can save the currently displayed image in the memory of this product and set it as the wallpaper for the AV screen or the top menu screen.

1 Display an image on the screen.

 Refer to Starting procedure (for USB) on page 23  Refer to Operations common to all file types on page 23

2 Touch on the image. 3 Touch the following items.

 As AVScreen:

Saves the image as the wallpaper for the AV screen.

 As HomeScreen:

Saves the image as the wallpaper for the top menu screen.

 As Both:

Saves the image as the wallpaper for both the AV screen and top menu screen.

4 Touch “Yes” to overwrite the image.

p If you save the new image, the current wallpaper is

overwritten.

Setting the slideshow interval

JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set. The default setting is “10sec”. p This setting is available during playback of the JPEG files.

1 Display the “Video Setup” screen.

2 Touch [Time Per Photo Slide]. 3 Touch the item.

The following items are available: 5sec, 10sec, 15sec, Manual.

6/10

4821

iPod

Abcdefghi

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ

Abcdefghi

ABC

Pops

99999/99999

9999’99” -9999’99”

Skips files forward or backward.

Switches between playback and pause.

Video source screen

fast forward.

iPod

Changes the audiobook speed.

1/2

Audio source screen 2

Sets a repeat play range.

: Normal playback

: Fast playback

: Slow-motion playback

Plays files in random order.

: Plays randomly songs or

videos within the selected list.

: Plays album randomly.

6/10

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ

iPod

Abcdefghi

ABC

Pops

: Repeats all in the selected list.

: Repeats the current song or video.

4821

99999/99999

6/10

4821

iPod

Abcdefghi

99999/99999

Full

9999’99” -9999’99”

Performs fast reverse or

Displays the “MIXTRAX” screen.  Refer to MIXTRAX on page 37

Displays the link search screen.

 Refer to Selecting a song from the list related to

the song currently playing (link search) on page

Selects a song or video from the list.

 Refer to Selecting song or video sources from the

playlist screen on page 25

Switches the control mode to “App Mode”.

 Refer to Using this product’s iPod function from

your iPod on page 26

Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.  Refer to Switching the connected Bluetooth device

on page 13

p By pressing the

forward or backward. p By pressing and hold the

perform fast reverse or fast forward. p You can set the screen size for the video image.  Refer to Common operations on page 48

or button, you can also skip files

or button, you can also

Connecting your iPod

When connecting an iPod to this product, select the method for connecting your device. Settings are required according to the connected device.

 Refer to Setup for iPod / iPhone or smartphone on page 16 p The available sources vary depending on the selected

method for connecting your device.

 Refer to Information on the connections and functions for

each device on page 17

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.

Starting procedure

1 Connect your iPod.

 Refer to Connecting your iPod on page 25 The source changes and then playback will start. p When connecting an iPhone or iPod touch, quit all applica-

tions before connecting the device.

2 Display the “AV source selection” screen.

3 Touch [iPod].

Selecting song or video sources from the playlist screen

You can search for the song or video you want to play from the playlist screen.

1 Touch . 2 Touch

category list.

3 Touch the category.

If you use English as the system language, the alphabet search function is available. Touch the initial search bar to use this function.

4 Touch the title of the list.

If you can not find the desired song or video, try to search again according to the above steps.

5 Start playback of the selected list.

p Depending on the generation or version of the iPod, some

functions may not be available.

p You can play playlists created with the MusicSphere applica-

tion. The application is available on our website.

or to switch the music or video

AppRadioOneiPod

Using this product’s iPod function from your iPod

You can control this product’s iPod function from the iPod on “App Mode”. The application screen of the iPod can be displayed on this product, and the music files and video files are played back with this product. p This function is not available when using iPod function with

an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iPod touch (5th generation).

p While this function is in use, the iPod will not turn off even if

the ignition key is turned off. Operate the iPod to turn off the power.

1 Touch . 2 Operate the connected iPod to select a video or

song and play.

p Some functions are still accessible from this product even if

the control mode is set to “App Mode”. However, the operation will depend on your applications.

p Touch

to switch the control mode.

Selecting a song from the list related to the song currently playing (link search)

p If you touch the artwork, the list of songs in the album is

displayed.

1 Touch song information to open the list of

songs.

2 Touch the song to play back.

Displays the launcher application screen.

Displays the previous screen.

AppRadioOne

Abcdefg Abcdefg Abcdefg Abcdefg Abcdefg

6/10

4821

Displays the current source.

Displays the menu screen.

p Press the DISP button to hide the App control side bar. Press

the DISP button again to display it again.

and are not available depending on the type of

device.

WARNING

Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.

Using AppRadioOne

You can control applications for an iPhone or a smartphone directly from the screen (AppRadioOne). In AppRadioOne, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product. p The compatible finger gestures vary depending on the

application for an iPhone or a smartphone.

p Even though an application is not compatible with

AppRadioOne, depending on the application an image may

be displayed. But you can not operate the application. To use AppRadioOne, install the AppRadio app on the iPhone or smartphone in advance. For details about the AppRadio app, visit the following site:

http://www.pioneerelectronics.com/AppRadioOne

p Be sure to read Using app-based connected content before

you perform this operation.

 Refer to Using app-based connected content on page 64

 Pioneer is not liable for any issues that may arise from

incorrect or flawed app-based content.

 The content and functionality of the supported

applications are the responsibility of the App providers.

 In AppRadioOne, functionality through the product is

limited while driving, with available functions determined

by the App providers.

 Availability of AppRadioOne functionality is determined

by the App provider, and not determined by Pioneer.

 AppRadioOne allows access to applications other than

those listed (subject to limitations while driving), but the

extent to which content can be used is determined by the

App providers.

Starting procedure

When connecting an iPhone or smartphone to this product, you must select the method for connecting your device. Settings are required according to the connected device.  Refer to Setup for iPod / iPhone or smartphone on page 16

For iPhone users

1 Connect your iPhone.

 Refer to iPhone with Lightning connector on page 52

2 Press . 3 Touch [APPS].

When the application is ready to launch, messages appear on the screen of this product.

4 Use your iPhone to launch the application.

The AppRadio app is launched.

5 Touch [OK].

The AppRadioOne screen (Application menu screen) appears.

Playback screen

Gives a “Thumbs Down” to

AppRadioOne

Pandora

For smartphone (Android) users

1 Unlock your smartphone and connect it to this

product via USB.

 Refer to Android device on page 53

2 Press . 3 Touch [APPS].

The AppRadio app is launched, and the AppRadioOne screen (Application menu screen) appears.

Common operation of all device

p If you connect your device while an AppRadioOne-

compatible application is already running, the application operation screen will appear on this product.

p Touch the desired application icon after the AppRadio app is

launched.

p The desired application is launched, and the application

operation screen appears.

p Press

to go back to the Top menu screen.

Using the keyboard

When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input the desired text directly from this product.

CAUTION

For your safety, the keyboard functionality is only available when the vehicle is stopped and the parking brake is engaged.

p This function is only available in AppRadioOne on the

iPhone.

1 Start up the AppRadioOne.

 Refer to Starting procedure on page 26

2 Touch the text input area on the application

operation screen.

A keyboard for entering text appears. p The language of the keyboard can be changed.

 Refer to Setting the keyboard language with the application for

iPhone on page 39

2 Press the Volume (+/–) button.

The audio mix menu will be displayed on the screen.

APP

HD Radio

Radio

1 Touch to mute. Touch again to unmute so that the sound is

not mixed.

2 Adjusts the audio volume.

Each touch of [+] or [–] increases or decreases the volume level.

p The AV operation screen and the Application screen can

be switched by pressing

Vol.

the playing track and skips to the next track.

6/10

Pandora

5 6

Pandora

Abcdefghi

Abcde ABC

Pause

9999’99”

-9999’99”

Gives a “Thumbs Up” to the playing track.

Skips tracks forward.

Switches between playback and pause.

4821

1/2

Using the audio mix function

You can output audio mixing AV source and an application for iPhone or smartphone when the AppRadioOne is used. p Depending on the application or the AV source, this function

may not be available.

1 Start up the AppRadioOne.

Displays the preset station list.

Playback screen

Pandora

Select an item on the list ("1" to "6") to switch to the preset station.

6/10

Pandora

2 3

Pandora

Abcdefghi

Abcde ABC

Recalls the preset station stored to a key from memory.

Selects a Pandora station from the list.  Refer to Selecting a Pandora station from the list

on page 28

Creates a new station.  Refer to Adding a station on page 28

Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.  Refer to Switching the connected Bluetooth device

on page 13

p By pressing the

and are not available when using a shared station.

p p In this chapter, iPhone and iPod touch will be referred to as

“iPhone”.

Adds information for the track currently playing to bookmarks.

button, you can skip songs forward.

WARNING

4821

No feature should be used unless it is safe to do so under the driving conditions you are experiencing.

Pandora operations

You can enjoy Pandora by connecting an iPhone or a smartphone that has the Pandora application installed.

2/2

Important

 Requirements to access Pandora using Pioneer car audio/

video

 Refer to Setup for iPod / iPhone or smartphone on page

 Please update the firmware of the Pandora application to

the latest version before use. Download it from the iTunes App Store or Google Play.

 Create a free or a paid account online. You can create

the account in the Pandora application from your iPhone or from the website (http://www.pandora.com/account/ register).

 To use the Pandora service, you need to connect to the

Internet via 3G, EDGE, LTE (4G) or Wi-Fi network. If the data plan for your iPhone does not provide for unlimited data usage, additional charges from your carrier may apply.

Limitations:

 Depending on the availability of the Internet, you may not

be able to receive the Pandora service.

 The Pandora service is subject to change without notice.

The service could be affected by any of the following: firmware version of the iPhone, firmware version of the Pandora application, changes to the Pandora music service.

 Certain functions of the Pandora service are not available

when accessing the service through Pioneer car audio/ video products. They include, but are not limited to the following: creating new stations, deleting stations, sending information about current stations, buying tracks from iTunes, viewing additional text information, logging in to Pandora, adjusting Cell Network Audio Quality.

 Pandora internet radio is a music service not affiliated with

Pioneer. More information is available at

http://www.pandora.com

 The Pandora mobile application is available for most

iPhone and smartphone, please visit http://www.pandora. com/everywhere/mobile for the latest compatibility information.

Starting procedure

When connecting an iPhone or smartphone to this product, select the method for connecting your device. Settings are required according to the connected device.  Refer to Setup for iPod / iPhone or smartphone on page 16 p You can use the Pandora service by connecting an iPhone

via USB or Bluetooth.

p If you use a smartphone, connect via Bluetooth.

 Refer to iPhone with 30-pin connector on page 53  Refer to iPhone with Lightning connector on page 52  Refer to Registering your Bluetooth devices on page 12

1 Unlock and connect your device. 2 Display the “AV source selection” screen.

3 Touch [Pandora].

Selecting a Pandora station from the list

1 Touch .

The following items are available:

: switches to the station list.



: switches to the genre list.



: plays only one track based on particular musical char-



acteristics from several shuffled stations.

 A-Z: sorts the items in the list alphabetically.  Date: sorts the items in the list in the order of the dates.

: deletes the station.



p Shared stations are indicated by

Adding a station

1 Touch . 2 Touch [Track] (from track) or [Artist] (from

artist).

and pause.

Playback screen 1 (Track)

Playback screen 2 (Track)

Pandora

Spotify

A new station is created.

Storing the preset stations

You can store six stations to the preset keys “1” to “6”.

1 Touch . 2 Touch and hold an item on the preset station

list for a few seconds.

The current station is stored under a preset key.

6/10

Spotify

otify

Abcdefghi

ABC

PLAYING FROM PLAYLIST

9999’99” -9999’99”

Skips tracks forward or backward.

Saves or deletes the current song information to or from “Your Music”.

Switches between playback

9999

Plays tracks in random order.

4821

6/10

Spotify

otify

Abcdefghi

ABC

PLAYING FROM PLAYLIST

Switches to radio mode.

Spotify

Sets a repeat play range.

9999

4821

9999

and pause.

Playback screen 1 (Radio mode)

Playback screen 2 (Radio mode)

Gives a “Thumbs Down” to

Gives a “Thumbs Up” to

Spotify

otify

Abcdefghi

ABC

RADIO BASED ON

9999’99” -9999’99”

Skips tracks forward.

Saves or deletes the current song information to or from “Your Music”.

Switches between playback

6/10

4821

Abcdefghi

ABC

RADIO BASED ON

the playing track and skips to the next track.

6/10

Spotify

otify

4821

the playing track.

Starts new radio mode.

Selects a track or station from the list.  Refer to Selecting a track or station from the list on

page 31

Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.  Refer to Switching the connected Bluetooth device

p By pressing the

WARNING

on page 13

songs forward or backward.

or button, you can also skip

Using Spotify with your Pioneer car audio/video

To enjoy Spotify as you drive, first download the Spotify app to your iPhone or smartphone. You can download it from the iTunes App Store or Google Play. Choose a free account or a paid Premium account, either in the app or at spotify.com. A Premium account gives you more features, like offline listening. If you have Spotify already, please update the app so you have the latest version. Then connect your phone to your car. Now you can take your music on the road.

Important

 Confirm the requirements to access Spotify using Pioneer

car audio/video.

 Refer to Setup for iPod / iPhone or smartphone on page

 To use Spotify, you need to connect to the Internet via 3G,

EDGE, LTE (4G) or a Wi-Fi network. If the data plan for your iPhone or smartphone does not provide for unlimited data usage, additional charges from your carrier may apply.

 For information on the countries and regions where Spotify

can be used, take a look at https://www.spotify.com/us/ select-your-country/.

Limitations:

 Depending on the availability of the Internet, you may not

be able to receive the Spotify service.

 The Spotify service is subject to change without notice.

The service could be affected by any of the following: firmware version of the iPhone or smartphone, firmware version of the Spotify application, changes to the Spotify music service.

 Certain functions of the Spotify service are not available

when accessing the service through Pioneer car audio/ video products.

 Spotify is a music service not affiliated with Pioneer. More

information is available at https://support.spotify.com/

 The Spotify application is available for most iPhone and

smartphone, please visit https://support.spotify.com/ for the latest compatibility information.

Starting procedure

+ 174 hidden pages