Philips EM3E Service Manual

Contents

English

Your remote control 2 Preparation 3 Installation 4 Store TV channels 4

Select the menu language and country 4 Automatic installation 5

Manual installation 5 Give name 6 Reshuffle the programme list 6 Select favourite TV channels 6 Install TV setup 7-8

Installation

Operation

Use of the remote control 9-10 Use of the menus

Picture menu 11

Sound menu 12

Features menu 13 Dual Screen 14

NEXTVIEW 15-18

Teletext 19-21

The keys on top of the TV 21

Connect peripheral equipment

Connecting and selecting equipment 22-24 Remote control functions for peripherals 24-25 Recording 26

Tips 27 Index 27 Glossary 28

EasyLink features are based on the “one touch operation” approach.This means that a sequence of actions are executed at the same time in both the television and the video cassette recorder, provided both are fitted with the EasyLink function and connected with the eurocable supplied with your video recorder.

Help? If this instruction manual does not give an answer or if ‘Tips’ do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline.

Model: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Product No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Preparation

Preparation

Your remote control

yÚ

213 546 879 0

‡π

†

SMART

ACTIVE CONTROL

V P

fhU

INSTANT

◊

MODE

VCR

Installation p. 4

DVD/Satellite selection p.25

Videorecorder selection p. 24

NEXTVIEW/TXT guide on/off æ

p. 15

main menu on/off

p. 11

Peripherals p. 24

selection of EXT1, EXT2,

EXT3 or FRONT

volume up/down p. 9

sound mute p. 9 ¬

programme selection p. 9 P

surround modes p. 9

smart sound p. 10

smart picture p. 10 a

switch to standby p. 9

EasyLink p. 25

INSTANT recording

Teletext p. 19-20

b teletext on/off C time display

subpage selection

f solution to puzzles h enlarge

h Zoom p. 9

Cursor to select your choice p. 4

OK activate your choice

Colour keys

- NEXTVIEW selection p.15

- direct teletext page or subject selection, p. 19

Audio/video equipment

p. 24-25

on screen info p. 9

previous programme p. 9

◊

video recorder function

X bilingual choice / sound info p. 10

TXT language group selection p. 19

S freeze the picture p. 10

hold teletext page p. 20

b dual screen p. 14

q picture format, p. 10

h active control on/off p. 10

& Place the TV on a solid surface.

For ventilation, leave at least 5 cm free all around the TV. Do not place the TV on a carpet. To prevent any unsafe situations, do not place any objects on top of the TV. Avoid heat, direct sunlight and exposure to rain or water.

é Insert the aerial plug firmly into the aerial socket x at the back of the

TV.

“ Insert the mains plug in the wall socket having a mains voltage of 220V-240V.

To prevent damaging the mains (AC) cord which could cause a fire or electric shock, do not place the TV on the cord.

‘ Remote control: Remove the cover of the battery compartment.

Insert the 2 batteries supplied (Type R6-1.5V).

The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries exhausted batteries may not be disposed of with your household waste. Please check on how to dispose of exhausted batteries according to local regulations.

Note: this remote control functions with TVs which use the RC6 signalling standard.

( Switch the TV on : Press the power switch A on the front of your TV.

A green indicator on the front of the TV lights up and the screen comes on. If the TV is in standby mode (see p. 9), press the -P+ key on the remote control.

The red lamp blinks every time you press a key on the remote control. When you switch on your set for the first time, the menu

LANGUAGE

automatically appears on the screen.The explanation appears in different languages one at a time. Choose your own language and press the OK key on the remote control.

Go on to page 4, Store TV channels.

3Preparation

Preparation

min.

CABLE

R6 / 1,5 V

Installation

Store TV channels

First, select your language and country.

& Select Menu language and press the OK key.

é Select your language and press the OK key.

Use the cursor up/down to scroll through the list and to bring up other languages which are not displayed on the screen at present.

“ Select Country and press the OK key.

‘ Select the country where you are now located and press the OK key.

Use the cursor up/down to scroll through the list and bring up other countries which are not displayed on the screen at present.

Select

Other when none of the countries applies.

You can now search for and store the TV channels in two different ways: using automatic installation or manual installation (tuning-in channel by channel). Select your choice and press the OK key.

Select the menu language and country

MENU TITLE

Menu language

J INSTALLATION

MENU TITLE

United Kingdom

....

J Country

MENU TITLE

English

....

J Menu language

Press U and h at the same time.

Installation

Select the

INSTALLATION

& Use the cursor in the up/down, left/right directions to select a menu item.

é Press the OK key to activate.

“ Use the MENU key to return or to switch the menu off.

To use the menus

‡π

†

f hU

INSTANT

yÚ

V P

213 546 879

‡π

†

fhU

◊

INSTANT

yÚ

select menu item

return or switch main menu off

activate

MENU TITLE

Subject 1 Subject 2 Subject 3

J Subject 4

Subject 5 Subject 6

J Subject 4 L M

After the new or extra TV channels have been stored, the TV automatically transfers those TV channels to the video recorder if it is equipped with the EasyLink function.

The message EasyLink : downloading ...... appears on the screen. The

programme list of the video recorder is now the same as the one of the TV. If the TV is connected to a video recorder which supports the

NEXTVIEWLink function,

the TV also automatically transfers the language and country selections to the video recorder.

Searching for and storing TV channels is done channel by channel. You must go through every step of the Manual installation menu.

Selection mode is only present and lights up if the country selected also

offers the channel option (C-channels for aerial channels, S-channels for cable channels). You can choose either channel or frequency mode.

& Select the TV system

Select the country or part of the world from where you want to receive the TV channel. If you are connected to a cable system, select your country or part of the world where you are now located.

é Press the cursor down and enter the programme number with the digit keys.

“ Search for a TV channel

Press the cursor left/right. The frequency or the channel number increases until a TV channel is found.

Direct selection of a TV channel

If you know the frequency, the C- or S-channel number, enter it directly with the digit keys 0 to 9. Ask for a list from your cable company or dealer, alternatively consult the Table of frequencies on the inside backcover of this handbook.

‘ Fine tune

In case of poor reception, you can improve the reception by adjusting the frequency with the cursor left/right.

( To store your TV channel, select Store and press the OK key.

Repeat steps

& to ( to store another TV channel.

§ To exit from the menu press the MENU key on the remote control.

In the Automatic installation menu select Start and press the OK key to activate the searching. All TV channels are searched for and stored automatically.

If a cable system which broadcasts ACI (Automatic Channel Installation) or a TV channel transmitting a teletext page with the frequencies and programme names of all the TV channels which can be received, is detected, the search is stopped and a programme list appears. The programme list is automatically filled with all the programme numbers and names of the TV channels transmitted.

It is possible that the cable company or the TV channel displays a broadcast selection menu. Layout and items are defined by the cable company or the TV channel. Make your choice with the cursor and press the OK key.

To exit from the menu press the

MENU key on the remote control.

Go on to page 6.

5Installation

Manual installation

Automatic installation

Start Stop

TV is searching One moment please ...

J Stop K

Automatic installation

Start Stop

1 BBC1 2 BBC2 3 CNN

....

J Start K

Manual installation

(Selection mode) System Programme no. Search Fine tune Store

J System K

Installation

Give name

It is possible to change the name stored in the memory or to assign a name to a TV channel which has not yet been entered.A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99. For example SUPER, BBC1,... Between 99 and 0 you can also name any peripherals that are connected to a euroconnector.

& Select Give name in the INSTALLATION menu and press the OK key. é Select the programme number. “ Press the OK key. ‘ Select the character with the cursor up/down. ( Select the following position with the cursor right.

§ Select the following character. è Press the OK key when finished. ! Press the MENU key to return to the INSTALLATION menu.

Space, numbers and other special characters are located between Z and A.

According to your preference you can change the order of the stored TV channels.

& Select Reshuffle in the INSTALLATION menu and press the OK key. é Select the programme number you want to exchange. “ Press the OK key. ‘ Select the new number you want to exchange it with. ( Press the OK key.

Repeat the operation until all TV channels are allocated as you like.

§ Press the MENU key to return to the INSTALLATION menu.

Reshuffle the programme list

After leaving the installation you can browse through the TV channels by pressing the - P + key. Only those TV channels which are in the favourite list will be displayed. Non-favourite TV channels can still be selected with the digit keys. By default all stored channels are added to the favourite list.

& Select Favourite programmes in the INSTALLATION menu and press

the OK key.

é Select your favourite programme number. “ Select Ye s or No with the cursor left/right. ‘ Repeat for every TV channel you want to make a favourite or a

non-favourite TV channel.

( Press the MENU key to return to the INSTALLATION menu.

In order for

NEXTVIEW to function properly, the first TV channel from the favourite list

should also broadcast the correct local date and time via teletext.

Select Favourite TV channels

INSTALLATION

Menu language Country

Automatic installation Manual installation Give name Reshuffle Favourite programmes

SETUP

J Give name

Give name

EXT1 EXT2 EXT3 FRONT 0 1 BBC1 2 BBC2

3 ....

4 ....

5 ....

J 0

Reshuffle

EXT1 EXT2 EXT3 FRONT 0 1 CNN 2 BBC2

3 ....

4 ....

5 ....

J 1 CNN

Favourite programmes

0 ... No 1 ... Yes 2 ... No

3 .... No

4 .... Yes

5 ....

J 2 ... Yes

7Installation

The Setup menu allows you to adjust initial settings, i.e. those which are not related to the installation of the TV channels. The Setup menu contains items that control the settings of the TV’s functions, features, services and peripherals you may have connected.

& Use the cursor in the up/down, left/right directions to select the menu item. é Use the OK key to activate. “ Use the MENU key to return or switch menu off.

Digital sources (for future use)

Define Decoder/Descrambler programme numbers

If a decoder or a descrambler is connected, see p. 22 you can define one or more programme numbers as decoder programme numbers.

Press the cursor left/right to select the input used to connect to your decoder

Off, EXT1 or EXT2.

Select

Off if you do not want the selected programme number being

activated as a decoder programme number.

Select

EXT2 when the decoder is connected to your EasyLink video recorder.

When selecting the decoder, the message

EasyLink: downloading presets....

appears on the screen.

Picture tilt

Select

Picture tilt with the cursor up/down.

Keep the cursor left/right pressed to adjust the rotation of the picture.

Information line

Select

On and after the selection of a TV programme or after pressing the

i key on the remote control, a TV channel which broadcasts teletext may transmit the name of the TV channel, the programme name or another message.This is displayed on screen next to information about sound and picture format. When selected

Off, only sound and picture format information is displayed

after the selection of a TV channel or after pressing the i key.

Factory settings

Select

Factory settings and press the OK key to restore picture and sound

settings, predefined in the factory.

Auto format

Selecting

Ye s causes the screen to automatically fill as much of the picture as

possible when TV programmes are not carrying special signals detecting the correct screen format. With the q key on the remote control you can still select other picture formats. See p. 10.

Install TV Setup

INSTALLATION

Menu language Country

Automatic installation Manual installation Give name Reshuffle Favourite programmes

SETUP

J SETUP

Decoder/Descrambler

Programme Decoder status

J Programme

SETUP

Digital Sources

Decoder/Descrambler Picture tilt Information line Factory settings Auto format yes/no Auto Surround INSTALLATION

J Decoder/Descrambler

Installation

Auto Surround

Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes. In that case, the TV automatically switches to the best Surround Sound mode when Auto Surround is switched on. Virtual Dolby* Surround will be reproduced, see p. 9. Overruling this surround mode remains possible.

Installation

Select

Installation and press the OK key to return immediately to the

INSTALLATION menu.

‘ To exit from the menu press the MENU key repeatedly.

SETUP

Digital Sources

Decoder/Descrambler Picture tilt Information line Factory settings Auto format yes/no Auto Surround INSTALLATION

J Auto Surround

‘Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.

+ 22 hidden pages