Pelco FMCI-BF1SM1ST, FMCI-AF1SM1STM, FMCI-AF1SM1ST, FMCI-BF1SM1STM, FMCI-BF1MM1ST Specsheet

0 (0)
Pelco FMCI-BF1SM1ST, FMCI-AF1SM1STM, FMCI-AF1SM1ST, FMCI-BF1SM1STM, FMCI-BF1MM1ST Specsheet

PRODUCT SPECIFICATION

transmission and power

 

 

FMCI Series Ethernet Optical Fiber Media Converters

10/100 MBPS ETHERNET TO OPTICAL MEDIA CONVERTER

Product Features

10/100 Mbps Ethernet

10Base-T/100Base-TX Electrical Port

100Base-FX Optical Port

Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data

Optical Port Supports 100 Mbps Full-Duplex Data

Automatic MDI/MDI-X (medium dependent interface/medium dependent interface crossover) Operation

Multimode Fiber Support for Distances up to 3 km (2 mi)

Single-Mode Fiber Support for Distances up to 20 km (12 mi)

Transparent to Data Encoding/Compatible with Major Data Protocols

Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal Control Equipment Environmental Standards

ST Optical Connectors

1-Fiber Design

Flexible Option for Operating AC/DC Power

Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events

No Performance Adjustments Required

LED Status Indicators for Monitoring All Critical and Normal Operating Parameters

Standard Size is Hot-Swappable in the Card Cage

Compliant with IEEE 802.3 Standards

FMCI Series Ethernet media converters are designed to transmit and receive 10/100 Mbps data over multimode or single-mode optical fiber with ST optical connectors. The electrical interface will autonegotiate to a 10 Mbps or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate.

FMCI Series media converters are environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status and monitoring critical operating parameters.

FMCI-AF1MM1ST

FMCI-AF1SM1STM

(BOTH PAIR WITH FULL-SIZE OR MINI B-SIDE)

Standard size FMCI Series units can be either surfaceor rack-mounted; mini units are surface-mount only. Either type can be DIN-rail mounted by the addition of an adapter plate.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3932 / REVISED 8-24-15

Loading...
+ 1 hidden pages