Parkside PSTDA 10-Li B2 Translation Of Original Operation Manual
IAN 270419
CORDLESS JIGSAW PSTDA 18-Li B2
CORDLESS JIGSAW
Translation of original operation manual
BATTERIDREVEN PENDULSTIKSAV
Oversættelse af den originale driftsvejledning
AKKU-PENDELHUBSTICHSÄGE
Originalbetriebsanleitung
ACCU-DECOUPEERZAAG
Vertaling van de originele gebruiksaanwijzing
GB / IE Translation of original operation manual Page 1
DK Oversættelse af den originale driftsvejledning Side 13
NL / BE Vertaling van de originele gebruiksaanwijzing Pagina 25
DE / AT / CH Originalbetriebsanleitung Seite 37
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
A
1
PSTDA 18-Li B2
GB
IE
Contents
Introduction ......................................................2
Intended use ................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical data .............................................................. 2
General Power Tool Safety Warnings ................................3
1. Work area safety .......................................................... 3
2. Electrical safety ........................................................... 3
3. Personal safety ............................................................ 4
4. Power tool use and care .................................................... 4
5. Use and handling of the cordless power tool .................................... 4
6. Service .................................................................. 5
Appliance-specific safety instructions for jigsaws .................................... 5
Safety guidelines for battery chargers ............................................ 5
Supplementary notes ......................................................... 5
Genuine accessories/auxiliary equipment ......................................... 6
Information on saw blades ..................................................... 6
Before initial use ..................................................6
Charging the battery (see Fig. A) ................................................ 6
Attaching/disconnecting the battery pack to/from the appliance ....................... 6
Checking the battery charge level ............................................... 7
Initial use ........................................................7
Fitting/changing the saw blade ................................................. 7
Fitting the protective cover ..................................................... 7
Fitting the guide fence ........................................................ 7
Connecting the sawdust extraction device ......................................... 7
Sawdust blowing function ..................................................... 7
Fitting the splinter guard ....................................................... 7
Fitting the sliding shoe ........................................................ 7
Operation .......................................................8
Setting the cutting angle ....................................................... 8
Setting the stroke rate ......................................................... 8
Adjusting the pendulum stroke .................................................. 8
Switching the appliance on/off ................................................. 8
Maintenance and cleaning ..........................................8
Warranty ........................................................8
Service ..........................................................9
Importer ........................................................9
Disposal .........................................................9
Translation of the original Conformity Declaration .....................10
Ordering a replacement battery ....................................11
Online ordering ............................................................11
Telephone ordering .........................................................11
2
PSTDA 18-Li B2
GB
IE
CORDLESS JIGSAW
PSTDA 18-Li B2
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high
quality product. The operating instructions
are part of this product. They contain
important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all handling and safety instructions.
Use the product only as described and for the
range of applications specified. If passing on the
product to a third party please hand over all
documents as well.
Intended use
This appliance is suitable for straight and curved
cutting as well as mitre cuts of up to 45° on angular
workpieces made of plastic, wood and light metal.
This appliance is exclusively intended for private use
in dry indoor spaces. Observe the guidelines on
saw blade types. Any other usage of or modification to the appliance is deemed to be improper and
carries significant risk of accidents. The manufacturer
shall assume no liability for damage attributable to
misuse.
Features
Safety lock-out for On/Off switch
On/Off switch
Housing
Release button for battery pack
Battery pack
Extraction nozzle
Switch for sawdust blower
Baseplate
Sliding shoe (removable)
Pendulum stroke switch
Guide fence
Guide roller
Saw blade
Splinter guard
Insertion openings (each incl. locking screw)
Protective bracket
Quick-release chuck
Protective cover
Working light
Clamping screws
Toothing
Battery charge level button
Battery display LED
Rapid charger
Red charge control LED
Green charge control LED
Package contents
1 cordless jigsaw incl. extraction nozzle
1 rapid battery charger
1 guide fence
2 saw blades for woodworking
1 saw blade for metalworking
1 Allen key
1 splinter guard
Operating instructions
Technical data
Cordless jigsaw:
PSTDA 18-Li B2
Rated voltage: 18 V
Idle speed: n0 0–2700 min
-1
Stroke: 20 mm
Pendulum stroke: 3 stages and fine-cut
setting
Cutting depth: wood/aluminium/metal:
80/12/5mm
Cuts: 0° - 15° - 30° - 45°
left/right
Battery: PAP 18 A1
Type: LITHIUM ION
Rated voltage: 18 V
Capacity: 1.5 Ah
Rapid battery charger: PLG 18 A1
INPUT:
Rated voltage: 230–240 V ~, 50 Hz
Power consumption: 40 W
OUTPUT:
Rated voltage: 18 V
Charging current: 1.8 A
Charging time: approx. 60 min
Fuse (internal): 2 A
T2A
Protection class: II /
3
PSTDA 18-Li B2
GB
IE
Noise and vibration data:
Noise measurement value determined in accordance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level: 81,3 dB(A)
Sound power level: 92,3 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Weighted acceleration, typically:
Cutting boards: a
h
= 6.385 m/s
2
Cutting sheet metal: ah = 3.540 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance
with a standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
WARNING!
► The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. There is a risk of underestimation of the vibration load if the power tool is
used regularly in this manner. Try to keep the
vibration loads as low as possible. Measures
to reduce the vibration load are, e.g. wearing
gloves and limiting the working time. Wherein
all states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan-
gled cords increase the risk of electric shock.
4
PSTDA 18-Li B2
GB
IE
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energising power tools that have the switch
on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5. Use and handling of the cordless
power tool
a) Charge the rechargeable battery unit using
only the charger recommended by the manufacturer. Chargers are often designed for a par-
ticular type of rechargeable battery unit. There is
the danger of fire if other types of rechargeable
battery units are used.
5
PSTDA 18-Li B2
GB
IE
b) Only the rechargeable battery units supplied
are to be used with the power tools. The use
of other rechargeable battery units may result
in injury or a fire hazard.
c) When they are not being used, store recharge-
able battery units away from paper clips, coins,
keys. nails, screws or other small metal objects
that could cause the contacts to be bridged.
Short-circuiting the contacts of a rechargeable
battery unit may result in burns or fire.
d) Fluid may leak out of rechargeable battery
units if they are misused. If this happens, avoid
contact with the fluid. If accidental contact occurs, rinse the affected area with water. Seek
additional medical help if any of the fluid gets
into your eyes. Escaping battery fluid may cause
skin irritation or burns.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water and moisture.
Danger of explosion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
Appliance-specific safety instructions
for jigsaws
■ Hold the power tool by the insulated
handles if carrying out work during which
the power tool may come into contact with
concealed power cables. Contact with a live
cable may also cause metal parts of the appliance to become live and may result in electric
shock.
Safety guidelines for battery
chargers
■ This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under supervision or have been told how to use
the appliance safely and are aware
of the potential risks. Children must
not use the appliance as a plaything.
Cleaning and user maintenance
tasks may not be carried out by children unless they are supervised.
■ If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
This charger is suitable for indoor use
only.
WARNING!
■ Do not operate the appliance with a dam-
aged cable, supply cord or mains plug. A
damaged power cord causes danger to life
by electric shock.
Supplementary notes
■ Keep your hands away from the sawing area.
Do not reach underneath the workpiece. Contact with the saw blade may result in injury.
■ Keep your hands away from the stroke
rod and the quick-release chuck. There is
a risk of crushing if contact is made with these
components.
■ Always switch on the power tool before apply-
ing it to the workpiece. Otherwise, there is a risk
of a kickback.
■ When sawing, ensure that the baseplate
and the sliding shoe is placed against the
workpiece.
6
PSTDA 18-Li B2
GB
IE
■ When you use the splinter guard , take off the
sliding shoe
first.
■ After completing your work, switch the power
tool off and do not pull the saw blade
out
of the insert until the tool has stopped entirely.
This prevents kickbacks, and allows you to put
the tool down safely.
■ Only use undamaged saw blades that are
in perfect working order. Bent and blunt saw
blades can break or may cause a kickback.
■ Secure the workpiece. Use clamps/a vice to
hold the workpiece firmly. This is safer than
simply holding it in your hand.
■ Never work on moistened materials or damp
surfaces.
■ Dust may be hazardous! When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropriate dust extraction device.
■ Wear a dust mask.
■ Ensure there is sufficient ventilation.
Genuine accessories/auxiliary equipment
■ Only use the accessories and auxiliary
equipment that are specified in the operating instructions or that are compatible with
the appliance.
Information on saw blades
Parkside basic equipment includes saw blades
principally for use with wood and metal.
▯ 2 saw blades for general wood cutting
▯ 1 saw blade for light metals up to 3 mm
NOTE
► You can use any saw blade provided it is fitted
with a suitable mounting (single-lug shank).
Saw blade type
suitable unsuitable
Before initial use
Charging the battery (see Fig. A)
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger.
NOTE
► Three appliances - three compatible batteries.
Interchangeable!
(see chapter ordering a replacement battery)
■ Never charge the battery pack when the ambi-
ent temperature is below 10°C or above 40°C.
♦ Connect the battery pack
to the rapid bat-
tery charger (see Fig. A).
♦ Push the mains plug into the mains power
socket. The control LED
will light up red.
♦ The green control LED
indicates that the
charging process is complete and the battery
pack is ready.
♦ Push the battery pack
back into the appliance.
■ Never recharge a battery pack again im-
mediately after rapid charging. This could
overcharge the battery pack, thus reducing the
lifespan of the battery and charger.
■ Switch off the charger for at least 15 minutes
between successive charging sessions.
Also disconnect the power plug from the mains
power socket.
Attaching/disconnecting the
battery pack to/from the appliance
Inserting the battery pack:
♦ Allow the battery pack to click into place in
the appliance.
Removing the battery pack:
♦ Press the release button
and remove the
battery pack.
7
PSTDA 18-Li B2
GB
IE
Checking the battery charge level
♦ Press the battery charge level button to
check the status of the battery (see also main
diagram).
The status/remaining charge will be shown on
the battery display LED
as follows:
♦ RED/ORANGE/GREEN = maximum charge/
power
RED/ORANGE = medium charge/power
RED = low charge – charge the battery
Initial use
Fitting/changing the saw blade
Remove the battery before carrying out any
work on the power tool (e.g. maintenance, toolchanging, etc.) as well as during carriage and
storage of the power tool.
Unintentional depressing of the On/Off button can
result in injury.
♦ Push the protective cover
together at the two
outer holders and pull it off toward the front.
♦ Turn the quick-release chuck
and hold it in
this position.
♦ Press the required saw blade into the quick-
release chuck
as far as the limit stop.
♦ Release the quick-release chuck
it must return to
its initial position. The saw blade is now locked.
■ WARNING! The saw blade teeth must point
forwards at this point (see foldout page)!
Fitting the protective cover
Mount the protective cover before connecting
the machine to the dust extraction.
♦ Mount the protective cover
onto the machine
in such a manner that the two outer holders
engage in the openings on the casing.
♦ Remove the protective cover
for applications
without dust extraction as well as when performing mitre cuts. For this, push the protective cover
together at the two outer holders and pull it
off toward the front.
Fitting the guide fence
The guide fence can be fixed on the left- or
right-hand side of the appliance.
♦ Undo both the locking screws on the insertion
openings
.
♦ Push the guide fence
into the insertion
openings .
♦ Re-tighten the two locking screws.
Connecting the sawdust extraction
device
♦ Push the extraction nozzle into the vacuum
extraction duct until it is secured.
Optional depending on the diameter of the dust
and sawdust extractor.
♦ Attach an approved dust and sawdust extractor
to the extraction nozzle
.
Supporting the extraction function:
♦ Slide the sawdust blower switch
to the rear.
Sawdust blowing function
Switching the sawdust blowing function on:
♦ Press the sawdust blower switch
forwards.
Fitting the splinter guard
The splinter guard can prevent fraying of the
surface while sawing wood. The splinter guard
can only be used for certain saw blade types,
without the sliding shoe and only for cutting
angles of 0°.
♦ Press the splinter guard
from below into the
baseplate
(notch facing upwards).
Fitting the sliding shoe
When working on sensitive surfaces, you can fit
the sliding shoe on the baseplate to avoid
scratching the surface.
♦ Mount the sliding shoe
onto the baseplate
and press it up at the back until it clicks into
place on the baseplate .
♦ To remove the sliding shoe
, unfasten it at
the rear of the baseplate and slide it off
forwards.
8
PSTDA 18-Li B2
GB
IE
Operation
Setting the cutting angle
♦ Undo the locking screws with the supplied
Allen key and pull the baseplate
to the rear.
♦ Adjust the cutting angle to 0°/15°/30°/45°
with the aid of the markings on the baseplate
.
Push the baseplate to the front so that the locking pin engages in the toothing .
♦ Re-tighten the locking screws
with the Allen
key.
Setting the stroke rate
The ON/OFF-switch has a variable speed control.
Pressing the ON/OFF switch lightly yields
a low speed. Increasing pressure increases the speed.
NOTE
► The integrated motor brake ensures rapid
stoppage.
Adjusting the pendulum stroke
♦ You can use the pendulum stroke switch
to adjust the pendulum movement of the saw
blade . You can achieve fine, clean-cut edges
without pendulum movement (setting “0”).
Deactivate pendulum movement when working
on thin workpieces. You can achieve an increasingly fast work rate if the pendulum stroke is
activated (settings 1–3).
Switching the appliance on/off
Switching the appliance on:
♦ Push the safety lock-out
to the left or right
and keep it pressed.
♦ Press the ON/OFF switch
.
Once the saw is running, you can release
the safety lock-out . The working light
illuminates when the ON/OFF switch is
depressed lightly or completely. This allows
illumination of the work area in low lighting.
Switching the appliance off:
Release the ON/OFF switch
.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the power tool off and remove the
battery before starting any work on the
power tool.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Use a soft, dry cloth to clean the housing.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level
is between 50% and 80%. Optimum storage
conditions are cool and dry.
■ Clean the appliance after completing your
sawing work.
■ Remove any dirt (e.g. sawdust). Clean the saw
blade mounting, if necessary with a brush or
by blowing it out with compressed air.
Warranty
You are provided a 3-year warranty on this
appliance, valid from the date of purchase.
This appliance has been manufactured with
care and inspected meticulously prior to
delivery. Please retain your receipt as proof
of purchase. In the event of a warranty claim,
please contact your Customer Service unit by
telephone. This is the only way to guarantee
free return of your merchandise.
The warranty only covers claims for material and
manufacturing defects, not for damage sustained
during carriage, components subject to wear
and tear or damage to fragile components such
as switches or batteries. This appliance is intended
solely for private use and not for commercial
deployment.
The warranty shall be deemed void in the case
of misuse or improper handling, use of force or
interventions which were not carried out by one
of our authorised Service centres. Your statutory
rights are not restricted by this warranty.
The warranty period is not extended in consequence of repairs carried out under the warranty.
This also applies to replaced and repaired compo-
9
PSTDA 18-Li B2
GB
IE
nents. Any damage or defects present at the time
of purchase must be reported immediately after
unpacking, but no later than two days after the
date of purchase. Repairs carried out after expiry
of the warranty period shall be subject to charge.
Service
WARNING!
► Have the power tool repaired by the Ser-
vice centre or a qualified electrician and
only using genuine replacement parts. This
will ensure ongoing safety of the appliance.
► Always ensure that the power plug or the
mains cable is replaced only by the manufacturer of the appliance or by that party's
approved Customer Service unit. This will
ensure ongoing safety of the appliance.
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IAN 270419
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 270419
Hotline availability:
Monday to Friday 08:00 - 20:00 (CET)
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
Disposal
The packaging is made from environmen-
tally friendly materials and can be
disposed of at your local recycling plant.
Do not dispose of power tools in
normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Do not dispose of batteries in your
normal domestic waste!
Defective or worn-out rechargeable batteries must
be recycled according to Directive 2006/66/EC.
Take the battery pack and/or appliance to available collection facilities.
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs.
10
PSTDA 18-Li B2
GB
IE
Translation of the original
Conformity Declaration
We, KOMPERNASS HANDELS GMBH, Custodian
of Documents: Mr. Semi Uguzlu, BURGSTR. 21,
44867 BOCHUM, GERMANY, hereby declare that
this product complies with the following standards,
normative documents and EC directives:
Machinery Directive
(2006/42/EC)
EC Low Voltage Regulations
(2006/95/EC)
EMC (Electromagnetic Compatibility)
(2004/108/EC)
RoHS Directive
(2011/65/EU)
Applied harmonised standards:
EN 60745-1: 2009 / A11: 2010
EN 60745-2-11: 2010
EN 62233: 2008
EN 55014-1: 2006 / A2: 2011
EN 55014-2: 1997 / A2: 2008
EN 60335-1: 2012 / A11: 2014
EN 60335-2-29: 2004 / A2:2010
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Type designation of machine:
Cordless jigsaw PSTDA 18-Li B2
Year of manufacture: 06 - 2015
Serial number: IAN 270419
Bochum, 10/08/2015
Semi Uguzlu
- Quality Manager The right to effect technical changes in the context
of further development is reserved.
11
PSTDA 18-Li B2
GB
IE
Ordering a replacement battery
If you want to order a replacement battery for your appliance, you can do so easily via the Internet
on www.kompernass.com or by telephone.
The price of the replacement battery is €20, including VAT and shipping. Due to limited stocks, this item
may sell out quickly.
Online ordering
To order a replacement battery from the Accessory Shop:
■ Use your Internet browser to visit www.kompernass.com.
■ Click on the corresponding flag on the right hand side at the bottom of the page to select the desired
country and language.
■ Click on the tab "Accessory Shop" and then select the appropriate replacement battery under the
heading "Topseller".
■ After you have placed the rechargeable battery in the shopping basket, click the "Checkout" button
and follow the on-screen instructions to complete the ordering process.
NOTE
► Online ordering of replacement parts is not possible in all countries. In this case, please contact the
Service hotline.
■ This promotion is limited to one battery per customer / appliance, as well as a period of two months
following the end of the promotion. Thereafter, the replacement battery can be ordered as a replacement part, with other conditions prevailing.
Telephone ordering
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
To ensure that your order is processed swiftly, have the article number of your appliance to hand
(e.g. IAN 270419) in case of questions. The article number can be found on the label or the title page
of these instructions.
Three appliances - three compatible
batteries. Interchangeable!
12
PSTDA 18-Li B2
13
PSTDA 18-Li B2
DK
Indholdsfortegnelse
Indledning ......................................................14
Anvendelsesområde ......................................................... 14
Udstyr .................................................................... 14
Pakkens indhold ............................................................14
Tekniske data .............................................................. 14
Generelle sikkerhedsanvisninger for elværktøj .......................15
1. Sikkerhed på arbejdspladsen ............................................... 15
2. Elektrisk sikkerhed ........................................................15
3. Personsikkerhed ..........................................................16
4. Anvendelse og håndtering af elværktøj ........................................16
5. Anvendelse og håndtering af elværktøjet ......................................17
6. Service .................................................................17
Specielle sikkerhedsanvisninger for stiksave ....................................... 17
Sikkerhedsanvisninger for ladeapparater .........................................17
Supplerende anvisninger ..................................................... 18
Originalt tilbehør/originalt ekstraudstyr ..........................................18
Oplysninger om savklinger .................................................... 18
Før første brug ..................................................18
Opladning af den genopladelige batteripakke (se fig. A) ............................18
Indsætning / udtagning af den genopladelige batteripakke .......................... 19
Kontrol af det genopladelige batteris tilstand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Første brug .....................................................19
Montering/udskiftning af savklinge ............................................. 19
Montering af beskyttelsesafdækning ............................................19
Montering af parallelanslag ...................................................19
Tilslutning af spånudsugning .................................................. 19
Spånblæsefunktion .......................................................... 19
Montering af spånbeskytter ...................................................20
Montering af glidesko ....................................................... 20
Betjening .......................................................20
Indstilling af snitvinkel ........................................................ 20
Indstilling af slagtal ..........................................................20
Indstilling af pendulslag ......................................................20
Sådan tændes / slukkes værktøjet .............................................. 20
Vedligeholdelse og rengøring ......................................20
Garanti ........................................................21
Service .........................................................21
Importør .......................................................21
Bortskaffelse ....................................................22
Oversættelse af den originale overensstemmelseserklæring ............22
Bestilling af genopladeligt reservebatteri ............................23
Online-bestilling ............................................................ 23
Telefonisk bestilling .......................................................... 23
Loading...