PANJIT 1N5408, 1N5407, 1N5405, 1N5406, 1N5404 Datasheet

1N5400 THRU 1N5408

HIGH CURRENT PLASTIC SILICON RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes

FEATURES

•High current capability

•	Plastic package has Underwriters Laboratory	DO-201AD
	Flammability Classification 94V-O utilizing
	Flame Retardant Epoxy Molding Compound

•Exceeds environmental standards of MIL-S-19500/228

•Low leakage

MECHANICAL DATA

Case: Molded plastic , DO-201AD

Terminals: Plated axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.04 ounce, 1.1 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	1N5400	1N5401	1N5402	1N5403	1N5404	1N5405	1N5406	1N5407	1N5408	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200	300	400	500	600	800	1000	V
Maximum RMS Voltage	35	70	140	210	280	350	420	560	700	V
Maximum DC Blocking Voltage	50	100	200	300	400	500	600	800	1000	V
Maximum Average Forward Rectified					3.0					A
Current .375"(9.5mm) Lead Length at
TA=55 ¢J
Peak Forward Surge Current 8.3ms single					200					A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Instantaneous Forward Voltage at					1.2					V
3.0A DC
Maximum Reverse Current TA=25 ¢J					5.0					£g A
at Rated DC Blocking Voltage TA=100 ¢J					1000					£g A
Maximum Full Load Reverse Current Full					0.5					mA
Cycle Average 5"(12.5mm)lead length at
TL=105 ¢J
Typical Junction capacitance (Note 1)					30					PF
Typical Thermal Resistance (Note 2) R £KJA					20.0					¢J /W
Operating and Storage Temperature Range				-55 TO +150						¢J
TJ,TSTG
NOTES:

1.		Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2.		Thermal Resistance Junction to Ambient at 0.375"(9.5mm) lead length, P.C.B. mounted with
		0.8×0.8"(20×20mm) copper heatsinks.