PANJIT 1N5399, 1N5398, 1N5397, 1N5396, 1N5395 Datasheet

1N5391 THRU 1N5399

PLASTIC SILICON RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes

FEATURES

•Low cost

DO-15

•High current capability

•High reliability

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

•1.5 ampere operation at TL=70 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Low leakage

MECHANICAL DATA

Case: Molded plastic , DO-15

Terminals: Plated axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	1N5391	1N5392	1N5393	1N5394	1N5395	1N5396	1N5397	1N5398	1N5399	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200	300	400	500	600	800	1000	V
Maximum RMS Voltage	35	70	140	210	280	350	420	560	700	V
Maximum DC Blocking Voltage	50	100	200	300	400	500	600	800	1000	V
Maximum Average Forward Rectified					1.5					A
Current .375"(9.5mm) Lead Length at
TA=60 ¢J
Peak Forward Surge Current 8.3ms single					50					A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.5A					1.4					V
Maximum Reverse Current Rated TA=25 ¢J					5.0					£g A
DC Blocking Voltage TA=100 ¢J					500					£g A
Typical Junction capacitance (Note 1)					25					PF
Typical Thermal Resistance (Note 2)					26.0					¢J /W
Operating and Storage Temperature Range				-55 TO +150						¢J
TJ,TSTG
NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC.

2.Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.Board mounted.