PANJIT 1A7G, 1A6G, 1A4G, 1A3G, 1A2G Datasheet

		1A1G THRU 1A7G
		MINIATURE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
		VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
	FEATURES		R-1
	•	Plastic package has Underwriters Laboratory
		Flammability Classification 94V-O utilizing
		Flame Retardant Epoxy Molding Compound
	• Glass passivated junction version of 1A1G thru 1A7G
		in R-1 package
	• 1 ampere operation at TA=75 ¢J with no thermal runaway
	•	Exceeds environmental standards of MIL-S-19500/228

MECHANICAL DATA

Case: Molded plastic, R-1

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color Band denotes cathode

Mounting Position: Any

Weight: 0.0064 ounce, 0.181 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.

		1A1G	1A2G	1A3G	1A4G	1A5G	1A6G	1A7G	UNITS
Maximum Recurrent Peak Reverse Voltage		50	100	200	400	600	800	1000	V
Maximum RMS Voltage		35	70	140	280	420	560	700	V
Maximum DC Blocking Voltage		50	100	200	400	600	800	1000	V
Maximum Forward Voltage at 1.0A					1.1				V
Maximum Average Forward Rectified Current					1.0				A
.375"(9.5mm) lead length at TA=75 ¢J
Peak Forward Surge Current, IFM (surge):8.3ms					30				A
single half sine-wave superimposed on rated
load(JEDEC method)
Maximum Full Load Reverse Current, Full Cycle					30				£g A
Average at TA=75 ¢J
Maximum DC Reverse Current at TA=25 ¢J					5.0				£g A
At Rated DC Blocking Voltage	TA=100 ¢J				50				£g A
Typical Junction capacitance (Note 1)					15				PF
Typical Thermal Resistance R £KJA(Note 2)					50				¢J /W
Operating and Storage Temperature Range				-55 to +150					¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Thermal Resis6tance Junction to Ambient

* JEDEC Registered Value