PANJIT 1A7, 1A6, 1A5, 1A4, 1A3 Datasheet

1A1 THRU 1A7

MINIATURE PLASTIC SILICON RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere

FEATURES

•High reliability

R-1

• Low leakage

• Low forward voltage drop • High current capability

• Exceeds environmental standards of MIL-S-19500/228

MECHANICAL DATA

Case: Molded plastic black body, R-1

Epoxy: UL 94V-O rate flame retardant

Lead: MIL-STD-202E method 208C guaranteed

Mounting Position: Any

Weight: 0.0064 ounce, 0.181 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	1A1	1A2	1A3	1A4	1A5	1A6	1A7	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200	400	600	800	1000	V
Maximum RMS Voltage	35	70	140	280	420	560	700	V
Maximum DC Blocking Voltage	50	100	200	400	600	800	1000	V
Maximum Average Forward Rectified Current				1.0				A
.375"(9.5mm) lead lengths TA=25 ¢J
Peak Forward Surge Current 8.3ms single half sine-				30				A
wave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A				1.1				V
DC
Maximum DC Reverse Current TA=25 ¢J				5.0				£g A
At Rated DC Blocking Voltage TA=100 ¢J				500				£g A
Maximum Full Load Reverse Current Full Cycle				100				£g A
Average .375”(9.5mm) lead length TL=76 ¢J
Typical Junction capacitance (Note 1)				15				PF
Typical Thermal Resistance R £KJA				60				¢J /W
Operating and Storage Temperature Range TJ,TSTG			-55 to +150					¢J

NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 volts