Panasonic SC-PT753, SCPT750 User Manual

Region number
Example:
1 ALL
1
2
4
Operating Instructions
DVD Home Theater Sound System
Model No. SC-PT750
SC-PT753
Wireless surround
speakers
4
[U.S.A.[and[Canada[
As an ENERGY STAR Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
§
For Canada only: The word “Participant” is used in place of the word
“Partner”.
P PC
PX
®
®
High-quality picture
HDMI capability, Advanced
progressive scan and more.
6
XM® Satellite Radio
Enjoy a variety of digital radio
channels.
28
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
If you have any questions contact
In the U.S.A.: 1-800-211-PANA (7262) In Canada: 1-800-561-5505
RQTX0044-2P
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
These operating instructions are applicable to a variety of
regions.
Unless otherwise indicated, illustrations in these operating
instructions are of the model for U.S.A. and Canada.
Operations in these instructions are described mainly with the
remote control, but you can perform the operations on the main unit if the controls are the same.
System SC-PT750 SC-PT753
Main unit SA-PT750 SA-PT753
Front speakers SB-HF750 SB-HF750
Center speaker SB-HC750 SB-HC750
Surround speakers SB-HS750 SB-HS750
Subwoofer SB-HW750 SB-HW750
Digital transmitter SH-FX65T SH-FX65T
Wireless system SE-FX65 SE-FX65
CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA
(For wireless system)
The following mark and symbols are located on bottom of the unit.
CAUTION

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-7262
WARNING:
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.
For wireless system
Marking sign is located on bottom of the unit.
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) \U.S.A.\and\Canada] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong.
RQTX0044
The wide blade or the third prong are provided for your safety. If the
2
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

TABLE OF CONTENTS

Getting
Started
Playing
Discs
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 2
Simple Setup
step 1
step 2
step 3
Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the remote control . . . . . . . . . . . . . . . . . . . . . . 15
Convenient functions . . . . . . . . . . . . . . . . . . . . 16
Checking and selecting the disc . . . . . . . . . . . . . . . . . 16
Displaying current playback condition. . . . . . . . . . . . . 16
Playing CDs sequentially . . . . . . . . . . . . . . . . . . . . . . 16
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Quick replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Program and Random play . . . . . . . . . . . . . . . . . . . . . 17
Positioning . . . . . . . . . . . . . . . . . . . . .4
Speaker installation options . . . . . . . . . . . . . 5
Cable connections. . . . . . . . . . . . . . . 6
Audio and video connections . . . . . . . . . . . . 6
Speaker connections . . . . . . . . . . . . . . . . . . 7
Radio antenna connections . . . . . . . . . . . . . 7
Digital transmitter connection . . . . . 8
step 4 step 5
step 6
step 7
Control reference guide . . . . . . . . . . . . . . . . . 10
Discs that can be played. . . . . . . . . . . . . . . . . 12
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Playing data discs using navigation menus . .18
Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting a track using CD text . . . . . . . . . . . . . . . . . 18
Playing HighMAT
Playing RAM and DVD-R/ -RW (DVD-VR) discs . . . . 19
Using on-screen menus . . . . . . . . . . . . . . . . . . 20
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Other Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing the player settings . . . . . . . . . . . . . .23
Changing the delay time of the speakers. . . . . . . . . . 25
iPod connection. . . . . . . . . . . . . . . . 8
AC cord connections. . . . . . . . . . . . 8
Preparing the remote control . . . . . 9
Performing QUICK SETUP . . . . . . . 9
TM
discs . . . . . . . . . . . . . . . . . . . . . . 19
Other
Operations
Reference
Using the EZ Sync
One touch play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto input switching . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Speaker control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Power off link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EZ Sync Control only with TV’s remote control (for
“HDAVI Control 2”). . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the FM/AM radio . . . . . . . . . . . . . . . . . . . 27
Presetting stations automatically . . . . . . . . . . . . . . . . 27
Selecting the preset channels . . . . . . . . . . . . . . . . . . 27
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the XM® Satellite Radio . . . . . . . . . . . . . 28
Selecting XM channels by direct entry . . . . . . . . . . . . 29
Selecting XM channels by category . . . . . . . . . . . . . . 29
Presetting the XM channels . . . . . . . . . . . . . . . . . . . . 29
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Product Service . . . . . . . . . . . . . . . . . . . . . . . . .32
Troubleshooting guide . . . . . . . . . . . . . . . . . . . 33
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .36
TM
“HDAVI ControlTM” . . . . . 26
Using sound effects . . . . . . . . . . . . . . . . . . . . .30
Using the equalizer function. . . . . . . . . . . . . . . . . . . . 30
Enjoying sound from all speakers: Surround Music. . 30 Enhancing the sound from the center speaker:
Center Focus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Adjusting the amount of bass: Subwoofer level . . . . . 30
Enhancing the stereo sound:
Dolby Pro Logic II/Super Surround . . . . . . . . . . . . . 30
Adjusting the volume of each speaker:
Speaker level adjustments . . . . . . . . . . . . . . . . . . . 30
Enjoying audio from an external source . . . . .31
Enjoying audio from the television . . . . . . . . . . . . . . . 31
Using the Music Port . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Limited Warranty (ONLY FOR U.S.A.) . . . . . . . 38
Limited Warranty (ONLY FOR CANADA). . . . . 39
Accessories . . . . . . . . . . . . . . . . . . . . Back cover
RQTX0044
3
step
1
Positioning
How you set up your speakers can affect the bass and the sound field. Note the following points:
Place speakers on flat secure bases.Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.For optional wall mount, refer to page 5.
]Note]
Keep your speakers at least 10 mm (13/32q) away from the system for proper ventilation.
Simple Setup
Setup example
Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate.
Subwoofer
Positioning
Place to the right or left of the television, on the floor or a sturdy shelf so that it will not cause vibration. Leave about 30 cm (11 television.
13
/16q) from the
Front speakers
Left and right speakers are interchangeable.
60º
Center speaker
Put on a rack or shelf. Vibration caused by the speaker can disrupt the picture if it is placed directly on the television.
Main unit
To allow for proper ventilation and to maintain good airflow around the main unit, position it with at least 5 cm (2q) of space on all sides.
Universal Dock for iPod
(included only for SC-PT750)
For compatible iPod, refer to page 31.
Surround speakers
Left and right speakers are interchangeable.
Digital transmitter
Position near the main unit.
120º
§
§
Do not use the wireless system or the digital transmitter in a metal cabinet or bookshelf.
Wireless system
Place the wireless system within approximately 10 m (33 ft) from the main unit.
§
To avoid interference, maintain the following distances between the wireless system and other electronic devices that use the same radio frequency (2.4 GHz band).
Wireless LAN: approx. 2 m (6-1/2 ft)
Cordless phone and other electronic devices: approx. 2 m (6-1/2 ft)
The wireless system will automatically seek a clear channel if any of these other devices interfere with its communication. When this happens, the wireless link indicator ([W1] ”) flashes on the main unit, and there is a brief interruption in audio coming from the surround speakers.
This is the normal operation of the product working to assure the best possible performance of your home theater system.
If the interference persists, try moving the other devices to another location outside the range of the wireless system or move the wireless system nearer to the main unit.
Expand your listening options with a multi-room wireless sound system.
RQTX0044
4
You can enjoy a multi-room wireless sound system when you use the optional Panasonic wireless accessory SH-FX85. For details, please refer to the operating instructions for the optional Panasonic wireless accessory.
Optional Panasonic wireless accessory SH-FX85
Notes on speaker use Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be negatively affected.
You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
Reduce the volume in the following cases to avoid damage:
– When playing distorted sound. – When the speakers are reverberating due to a record player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument. – When adjusting the sound quality. – When turning the unit on or off.
If irregular coloring occurs on your television
The front and center speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The demagnetizing function of the television should correct the problem. If it persists, move the speakers further away from the television.

Speaker installation options

Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 k building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
1 Drive a screw (not included) into the wall.
5
4.0 mm (
2 Fit the speaker securely onto the screw(s) with the hole(s).
Front speaker
/32q)
Wall or pillar
g
(22 lbs) per screw. Consult a qualified
At least 30 mm (1
7.0 t o 9.4 mm
9
/32q to 11/32q )
(
4 to 6 mm (
Center speaker
5
/32q to 1/4q)
3
Simple Setup
/16q)
Caution
The main unit and supplied speakers are to be
used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/ or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
Do not attempt to attach these speakers to
walls using methods other than those described in this manual.
Caution
Do not touch the front netted area of the speakers. Hold by the sides.
e.g. Center speaker
190 mm
15
(7
/32q)
Surround speaker
Fitting speaker stands (not included)
(except subwoofer)
Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram.
The stands must be able to support over 10 kg (22 lbs).The stands must be stable even if the speakers are in a high
position.
e.g. Center speaker
Metal screw holes
For attaching to speaker stands
Positioning
3
5 mm (
/16q), pitch 0.8 mm (1/32q)
Plate thickness plus 7 mm to 10 mm
9
/32q to 13/32q)
(plus
60 mm (2
3
/8q)
Speaker stand
(not included)
RQTX0044
5
step
2
Cable connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC power supply cord until all other connections are complete.
Simple Setup
1
Basic setup example
Cable connections
Television (not included)
Other video connections for improved picture quality
L R
I/D SET
AC IN
Wireless system

Audio and video connections

RF IN
RF IN
RF OUT
AUDIO OUT
L
R
To you r c a b l e T V service or television antenna
2
AC IN
Cable TV box or video cassette recorder
(not included)
RF cable (not included)
AUDIO IN
L
R
VIDEO INVIDEO OUT
Audio cable
(not included)
Video cable
(included)
1
COMPONENT VIDEO OUT
OPTION V .1
TRANSMITTER
AV OUT
DIGITAL
AUX
PBY
L
R
R
P
3
FM ANT
75
LOOP
ANT GND
XM
LOOP
AM
ANT
EXT
VIDEO
OUT
Main unit
You can enjoy audio from your television, video cassette
AUX
COMPONENT VIDEO OUT
PBY
L
R
P
R
recorder or cable TV programs through this home theater system by connecting to the AUX terminals. Select “AUX” as the source (➜ page 31).
VIDEO
OUT
Main unit
Television terminals
Cables required
(not included)
HDMI cable
Main unit terminals Features
[\\\\\\\\\\\HDMI\\\\\\\\\\\]
This connection provides the best picture quality.
Set “Video Mode” to “On” (page 24, “HDMI” menu).Set “Video Output Mode” (page 21, Picture Menu).
AV IN
[Note]
Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use
Panasonic’s HDMI cable. Recommended part number: RP-CDHG15 (1.5 m/4.9 ft), RP-CDHG30 (3.0 m/9.8 ft),
AV OUT
EZ Sync “HDAVI Control”
If your Panasonic television is an HDMI control compatible television, you can operate your television synchronizing with home-theater operations or vice versa (page 26, Using the EZ Sync
TM
Control
”).
Make the audio connection (➜ above) when you use
EZ Sync “HDAVI Control”
function.
TM
“HDAVI
RP-CDHG50 (5.0 m/16.4 ft), etc.
COMPONENT
VIDEO IN
Y
PB
PR
All Panasonic televisions that have 480p input connectors are compatible. Consult the manufacturer if you have another brand of television.
Video cables
[COMPONENT\VIDEO]
COMPONENT VIDEO OUT
PBY
VIDEO
R
P
OUT
Connect to terminals
of the same color.
This connection provides a much purer picture than the VIDEO OUT terminal.
After making this connection, select “Darker” from the
“Black Level Control” in the “Video” menu (page 24).
To enjoy progressive video
Connect to a progressive output compatible
television. 1 Set “Video Mode” to “Off” (➜ page 24, “HDMI”
menu). Set “
Video Output Mode
2
the instructions on the menu screen
” to “480p”, and then follow
(page 21,
Picture Menu).
[Note]
Do not make the video connections through the video cassette recorder.
RQTX0044
Due to copy guard protection, the picture may not be displayed properly.
6
Only one video connection is required.

Speaker connections

2
Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the
speakers.
Wireless system
LR
Insert the wires
i: White
SURROUND
Rch
4
j: Blue
Speaker cable sticker (included)
Attach the corresponding speaker cables with the speaker­cable stickers to make connection easier.
3
1
Insert the wires, taking care
2
not to insert beyond the wire insulation.
correctly.
3 SURROUND (L) 4 SURROUND (R)

Radio antenna connections

3
Keep loose antenna cables away from other wires and cables.
[FM\indoor\antenna]
(included)
Affix this end of the antenna where
1
reception is best.
Adhesive tape
[AM\loop\antenna]
(included)
Stand the antenna up on its base. Place the antenna where reception is best.
3
2
Push!
ANT GND
LOOP
LOOP
EXT
FM ANT
75
AM
ANT
White
Red
Black
Click!
Main unit
i: White
FRONT
Lch
1
j: Blue
Insert the wires correctly.
1 FRONT (L) 2 FRONT (R) 5 CENTER 6 SUBWOOFER
[XM\antenna]
(not included)
Use an XM Connect & Play antenna, or XM Passport Mini-Tuner and Home Dock. Subscription is required to receive
XM Satellite Radio. Refer to page 28 for details.
Simple Setup
Cable connections
XM
Using an FM/AM outdoor antenna (optional)
Use outdoor antenna if FM/AM radio reception is poor.
Disconnect the antenna when the unit is not in use.Do not use the outdoor antenna during an electrical storm.
Leave the AM loop antenna connected.
LOOP
§
Rework your outdoor antenna’s 75 coaxial cable as follows.
1 Remove a piece of the outer
vinyl insulator.
13
7 mm (
/32z)
Peel back
9
/32z)
10 mm (
13
/32z)
10 mm (
FM ANT
75
LOOP
ANT GND
AM
ANT
EXT
2 Carefully pull the tabs apart
to remove the cover.
75 coaxial cable
§
(not included)
\U.S.A.\and\Canada]
Antenna plug (not included)
5 to 12 m
(16 to 39 feet)
3 Install the coaxial cable.
Clamp the cable conductor, and wind it on so that it does not contact anything else.
Clamp with pliers
FM outdoor antenna [Using a television antenna (not included)]
Disconnect the FM indoor antenna.The antenna should be installed by a
competent technician.
AM outdoor antenna [Using a vinyl wire (not included)]
Run a piece of vinyl wire horizontally across a window or other convenient location.
4 Attach the cover.
RQTX0044
7
step
3
Digital transmitter connection
Digital transmitter
Insert fully until you hear a click.
AUX
Simple Setup
OPTION V.1
AV OUT
DIGITAL
TRANSMITTER
L
R
COMPONENT VIDEO OUT
PBY
R
P
ANT GND
LOOP
VIDEO OUT
step
4
iPod connection
Proceed to step 5 if you are not connecting an iPod to the main unit.
For SC-PT753, use an optional SH-PD10 Panasonic Universal Dock for iPod.
Dock adapter for iPod nano 2nd generation (aluminum)
Dock adapter for iPod 5th generation (video) (60GB, 80GB)
(2GB, 4GB, 8GB)
11
10
The mark [11], [10] or [9] is shown on the back of each dock adapter.
For other types of iPod, use the dock adapter sold separately.
Or visit the official Apple website for compatible adapters.
Connect the dock to the back of the main unit.
Do not connect or disconnect the dock while the main unit is on.
Universal Dock for iPod
Dock adapter for iPod 5th generation (video) (30GB)
When removing, use your fingernail or a flat object to lift upwards.
Main unit
FM ANT
75
LOOP
AM ANT
EXT
9
XM
OPTION V .1
Do not insert or remove while the main unit is on.
Charging the iPod
iPod (not included) Connect the iPod firmly.
The indicator lights up when the iPod is inserted, and charging starts.
Charging time
iPod nano 2nd generation (aluminum) iPod 5th generation (video) iPod nano 1st generation
iPod 4th generation (color display) iPod 4th generation iPod mini
[Note]
AC cord must be connected with the main unit.“OPTION ¢” will be shown on the main unit’s display during iPod
charging in main unit standby mode. It will go off when charging is finished. For the above models under “fixed 5-hour charging”, “OPTION ¢” continues to be displayed throughout this duration, even when your iPod is fully charged. You can turn off this display by removing the iPod from the dock.
Compatibility depends on the software version of your iPod.
Until iPod is fully charged
5 hours (fixed)
8
step
5
AC cord connections
Digital transmitter connection/ iPod connection / AC cord connections
Wireless system
LR
AC IN
I/D SET
AC power supply cord
(included)
To household AC outlet
[For\areas\except\U.S.A.\ \and\Canada]
Ferrite core
Conserving power
The main unit and the wireless system consume a small amount of power when they are turned off (\U.S.A.\and\Canada] main unit: approx.
0.5 W, wireless system: approx. 0.2 W, \Others] main unit: approx. 0.9 W, wireless system: approx. 0.3 W). To save power when they are not to be
RQTX0044
used for a long time, unplug them from the household AC outlet. You will need to reset some memory items after plugging in the main unit.
[For\areas\except\U.S.A.\and\Canada]
Before connecting the AC power supply cord Set the voltage.
VOLT ADJ
110-127V 220-240V
[For\areas\except\U.S.A.\and\Canada]
If the power plug does not fit your AC outlet
Use the power plug adaptor (included).
If it still does not fit, contact an electrical parts distributor for assistance.
Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area
AC IN
in which this system is used.
AC power supply cord
(included)
[Note]
The included AC power supply cords are for use with the main unit and wireless system only. Do not use them with other equipment. Also, do not use cords for other equipment with the main unit or wireless system.
Main unit
To household AC outlet
step
6
Preparing the remote control
Batteries
Insert so the poles (i and j) match those in the remote control.
Press in and lift up.
R6/LR6, AA
Replace the cover.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.use different types at the same time.heat or expose to flame.take apart or short circuit.attempt to recharge alkaline or manganese batteries.use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
Use
step
7
Performing QUICK SETUP
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
To change your television’s video input mode, refer to its operating instructions.This remote control can perform some basic television operations (page 10).
Simple Setup
Aim at the remote control signal sensor (page 11), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
DVD
SETUP
, , ,
ENTER
RETURN
1
2
DVD
3
SETUP
4
5
Select
Register
ENTER
Turn on the unit.
Select “DVD/CD”.
Show the QUICK SETUP screen.
Setup
QUICK SETUP
Select the menu language.
English
ENTER
to select and press
Follow the messages and make the settings.
RETURN
Menu LanguageTV Ty p eTV Aspect
Press to finish QUICK SETUP.
RETURN
Preparing the remote control / Performing QUICK SETUP
to return
6
To change these settings later
Select “QUICK SETUP” in the “Others” menu (➜ page 25).
SETUP
Press to exit.
RQTX0044
9

Control reference guide

See page references in parentheses.
Refer to “Operating the television” below.
Select disc’s title numbers etc./Enter numbers (15)
Select the disc or show disc information (16)
Select preset radio stations/channels (27, 29)
Basic operations for play (14, 15)
Display current playback condition (16)
Start up and play a disc automatically (15, 26)
Show a disc top menu (18) or program list (19)
Control reference guide
Show a disc menu (18) or play list (19)
Television operations
Turn the main unit on/off (9)
Select the source
[DVD]: DVD/CD (9) [TUNER/BAND]: FM/AM (27), XM (28) [N,OSELECT]:
The below function is available only when using the optional Panasonic wireless sound system SH-FX85.
[2ND SELECT]
DVD/CD, FM/AM, XM
AUX
(31),
MUSIC P.
:
Change the source for the second
, (31),
OPTION
(31)
room
MAIN SOURCE (follows the selected source for the main room)#(FM#AM) Return to MAIN SOURCE
§
If the main room is in FM/AM mode, you can only select the same mode for the FM/AM tuner of the second room.
For details, refer to the operating instructions for the optional Panasonic wireless sound system SH-FX85.
§
#XM#
OPTION
#
Adjust the volume of the main unit
Select radio stations/channels manually (27, 29)
Select a group of contents to play (15)
Frame-by-frame/ Select or register menu items on the television screen (15)/ Browse XM radio categories (29)
Show on-screen menu (20)
CANCEL PLAY MODE REPEAT
(15) (17, 29) (16) (16)
SUBWOOFER
LEVEL
(30) (30)
SETUP
(23)
EQ
FL DISPLAY
(15, 29)
TEST
(30)
CH SELECT
SRD
MUSIC
(30)
C.FOCUS
(30)
(30)
CD MODE
PL
S.SRD
(30)
QUICK REPLAY
(16)
Turn the unit off automatically (Sleep timer)
The maximum setting is 120-min (in 30-min steps).Press the button again to confirm the remaining time on
the unit’s display.
To cancel, select “OFF” in the main unit’s display.
Operating the television
Aim the remote control at the Panasonic television and press the button. [Í TV]: Turn the television on/off [TV/VIDEO]: Change the television’s video input mode
[r, s]: Adjust the television volume
This may not work properly with some models.To operate some other brands of televisions, change the remote control
code.
Aim the remote control at the television. While pressing [Í TV], press the numbered buttons to enter the 4-digit television code.
If the code is correct, the television turns on or off. If it does not, try entering another code.
]Note]
Reenter the codes after you change the batteries.
Return to previous screen (15)
Mute the sound “MUTING” flashes in the main unit’s display while
the function is on.
To cancel, press the button again or adjust the
volume.
Muting is canceled when you switch the unit to
standby.
Television code list
Panasonic: 0051, 0250 Fisher: 0154 GE: 0047 Gold Star: 0178, 0317, 0457 Hitachi: 0145 JVC: 0053 Magnavox: 0054 Mitsubishi: 0150 Philips: 0054 Quasar: 0051, 0250
RCA: 0047 Samsung: 0060, 0587, 0702 Sanyo: 0154 Sharp: 0093, 0165 Sony: 0000 Sylvania: 0054 Thomson: 0047 Toshiba: 0156 Zenith: 0017
Avoiding interference with other Panasonic equipment
Other Panasonic audio/video equipment may start functioning when you operate the unit using the supplied remote control. You can operate this unit in another mode by setting the remote control operating mode to “REMOTE 2”.
RQTX0044
10
The main unit and remote control must be set to the same mode.
1 Press and hold [5] on the main unit and [2] on the remote
control until the main unit's display shows "REMOTE 2".
2 Press and hold [ENTER] and [2] on the remote control for at least 2
seconds.
To change the mode back to “REMOTE 1”, repeat both steps above by replacing [2] with [1].
Standby/on switch [POWER Í/I]
Turn the main unit on/off. Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. (14)
5 DISC SELECTOR Select a disc directly (14)
/-TUNE MODE / —FM MODE
Stop playing (14)/ Select the tuning mode (27) Adjust the FM reception condition
(27)
1/MEMORY
Play discs (14)/ Memorize the receiving radio stations/channels (27, 29)
Remote control signal sensor
Display
< OPEN/CLOSE
Open/Close the disc drawer (14)
DISC EXCHANGE
Open the disc drawer to exchange the disc in the play position (14)
DISC SKIP
Skip to the next disc tray (14)
SKIP
DISC
OPEN CLOSE
EXCHANGE
POWER
SELECTOR (27)
DVD/CD#FM#AM#XM# AUX#MUSIC P.#OPTION# Return to DVD/CD
Unit on/off button [POWER C I, BÍ]
Use this button to turn the wireless system on and off.
C I: The unit is on.: The unit is off.
12345
5 DISC SELECTOR
4, 5 / X TUNING W
Skip or slow-search play (14)/ Select the radio stations/channels (27, 29)
POWER
AUTO OPERATION ON/OFF
SELECTOR
TUNE MODE FM MODE
TUNING
MUSIC PORT
Connect an external device (31)
VOLUME
Adjust the volume of the main unit.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the wireless system is turned on and lights green when the wireless link is activated. When the wireless link is inactive for a long time, it turns red.
VOLUME
MUSIC PORT
MEMORY
Headphone plug type: 3.5 mm (
1
/8z) stereo mini plug
Reduce the volume before
connecting.
Audio is automatically switched to
2-channel stereo.
To prevent hearing damage, avoid
listening for prolonged periods of time.
Headphones (not included)
Control reference guide
EST. 1924
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing.
Listening caution
We recommend that you avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.Slowly increase the sound until you can hear
it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level: Leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.
RQTX0044
11
Discs that can be played
Commercial discs
Disc Logo
DVD- Video [DVD-V] High quality movie and music discs
Indicated in these
instructions by
Remarks
Video CD [VCD]
CD
[CD] Music discs
Music discs with video Including SVCD (Conforming to IEC62107)
Recorded discs (±: Playable, k: Not playable)
Disc Logo
DVD-RAM
DVD-R/RW
Recorded on a
DVD video
recorder, etc.
[DVD-VR]§2[DVD-V]
± k±±
±±k±±
Recorded on a personal
computer, etc.
§4
[WMA] [MP3] [JPEG]
Finalizing
Not necessary
Necessary
Discs that can be played
DVD-R DL
iR/iRW
iR
DL
CD-R/RW
It may not be possible to play all the above-mentioned discs in some cases due to the type of disc, the condition of the recording, the recording
method, or how the files were created (page 13, Tips for making data discs).
§1
This unit can play CD-R/RW recorded with CD-DA or Video CD format. [WMA] [MP3] [JPEG] This unit also plays HighMAT discs.
§2
Discs recorded on DVD video recorders or DVD video cameras, etc. using Version 1.1 of the Video Recording Format (a unified video recording standard).
§3
Discs recorded on DVD video recorders or DVD video cameras using Version 1.2 of the Video Recording Format (a unified video recording standard).
§4
Discs recorded on DVD video recorders or DVD video cameras using DVD-Video Format.
§5
Recorded using a format different from DVD-Video Format, therefore some functions cannot be used.
§6
A process that allows play on compatible equipment. To play a disc that is indicated as “Necessary”, the disc must first be finalized on the device it was recorded on.
§7
Closing the session will also work.
§1
k (±) — k (±) ——±±±
±
§3
±kkk
§5
kkk
§5
kkk
Necessary
Necessary
Necessary
Necessary
§6
§7
Discs that cannot be played
DVD-RW version 1.0, DVD-Audio, DVD-ROM, CD-ROM, CDV, CD-G, SACD, DivX Video Discs and Photo CD, DVD-RAM that cannot be removed from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and “Chaoji VCD” available on the market including CVD, DVCD and SVCD that do not conform to IEC62107.
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.
RQTX0044
12
Disc handling precautions
Do not attach labels or stickers to discs. This may cause disc
warping, rendering it unusable.
Do not write on the label side with a ball-point pen or other writing
instrument.
Do not use record cleaning sprays, benzine, thinner, liquids which
prevent static electricity, or any other solvent.
Do not use scratch-proof protectors or covers.Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels
(rented discs, etc.). – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart shapes.
Loading...
+ 28 hidden pages