Panasonic SC-PM38 Operating Instructions

Dear customer

Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.

These operating instructions are applicable to the following system.

System SC-PM38

Main unit SA-PM38 Speakers SB-PM48

Operating Instructions

CD Stereo System

Model No. SC-PM38

SUPPLIED ACCESSORIES

1 x Remote control (N2QAYB000429)

Please check and identify the supplied accessories.

Operations in these instructions are described using remote control, but you can do the operations with the main unit if the controls are the same. Your unit may not look exactly as illustrated.

2 x Remote control batteries

1 x AC mains lead

For Australia and N.Z. For Continental Europe,

1 x AM loop antenna

1 x FM indoor antenna

Middle East and Southeast Asia

EP GN GA

RQTX0191-1B

ENGLISH

RQTX0191

ENGLISH

RQTX0191

Table of contents

Safety precautions

Placement of speakers ............................................................2

Safety precautions ..................................................................2

Simple setup ............................................................................4

Preparing the remote control .................................................5

DEMO function .........................................................................5

Overview of controls ...............................................................6

Discs .........................................................................................7

Using the FM/AM radio ............................................................9

Using the timer ......................................................................10

Using sound effects ..............................................................11

Using other equipment .........................................................12

Troubleshooting guide ..........................................................14

Specifications ........................................................................15

Maintenance ...........................................................................15

Placement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary.

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Placement

Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects. Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

Note

Keep your speakers at least 10 mm away from the system for proper

• ventilation. These speakers do not have magnetic shielding. Do not place

• them near televisions, personal computers or other devices easily influenced by magnetism. To avoid damage to the speakers, do not touch the speaker cones if

• you have taken the nets off. You can damage your speakers and shorten their useful life if you play

• sound at high levels over extended periods. Reduce the volume in the following cases to avoid damage.

•

− When playing distorted sound.

− When adjusting the sound quality.

− When turning the unit on or off.

CAUTION

Use the speakers only with the recommended system.

• Failure to do so can damage the amplifier and speakers, and can cause fire. Consult a qualified service person if damage occurs or if a sudden change in performance is apparent. Do not attach these speakers to walls or ceilings.

•

ENGLISH

RQTX0191

ENGLISH

RQTX0191

LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A

• BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNIT’S VENTILATION

• OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH

• AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY

• FRIENDLY MANNER.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

DO NOT EXPOSE THIS APPARATUS TO RAIN,

• MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. USE ONLY THE RECOMMENDED ACCESSORIES.

• DO NOT REMOVE THE COVER (OR BACK); THERE

• ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

For Southeast Asia

THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES.

For Continental Europe, Middle East, Australia and N.Z.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI LEUDOSSA ILMASTOSSA.

DETTE APPARATET ER BEREGNET TIL BRUK UNDER MODERATE KLIMAFORHOLD.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

Inside of product Tuotteen sisällä Produktets innside

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/ or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

ENGLISH

RQTX0191

ENGLISH

RQTX0191

Simple setup

Making the connections

Connect the AC mains lead only after all the other connections have been made.

Connect the speaker cables.

Connect the FM indoor antenna.

Adhesive tape

Insert fully

Tape the antenna to a wall or column, in a position with the least amount of interference.

FM indoor antenna

Connect the AM loop antenna.

AM loop antenna

Stand the antenna up on its base. Keep the loose antenna cord away from other wires and cords.

To household mains socket

Connect the AC mains lead.

The included AC mains lead is for use with this unit only. Do not use it with other equipment. Do not use an AC mains lead from other equipment.

Insertion of connector

Appliance inlet

Approx. 6mm

Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit.

Connector

ENGLISH

RQTX0191

ENGLISH

RQTX0191

DEMO

VOLUME

OPEN/CLOSE

iPod

USB

FM/AM

Simple setup (continued)

Optional antenna connections

FM outdoor antenna

FM outdoor antenna (not included)

AM outdoor antenna

AM outdoor antenna (not included)

5 to12 m

AM loop antenna (included)

75 Ω coaxial cable (not included)

Never use an outdoor antenna during a lightning storm.

• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.

• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.

• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other

• convenient location.

Preparing the remote control

Batteries



Use a manganese dry battery or an alkali dry battery.

• Insert so the poles (+ and –) match those in the remote control.

• Remove if the remote control is not going to be used for a long period

• of time. Store in a cool, dark place.

• Do not heat or expose to flame.

• Do not leave the batteries in an automobile exposed to direct sunlight

• for a long period of time with doors and windows closed. Mishandling of batteries in the remote control can cause electrolyte

• leakage, which may cause a fire.

Use



Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit. Refer to page 6 for remote control signal sensor position.

Place this side in before the other side

Do not:

mix old and new batteries;

• use different types of batteries at the same time;

• take apart or short-circuit;

• attempt to recharge alkaline or manganese batteries;

• use batteries if their covering has been peeled off.

•

CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

R6/LR6, AA

DEMO function

When the unit is first plugged in, a demonstration of its functions may be shown on the display.

[g, –DEMO]

If the demo setting is off, you can show a demonstration by selecting “DEMO ON”.

Press and hold [g, –DEMO].

The display changes each time the button is held down.

DEMO OFF DEMO ON

While in standby mode, select “DEMO OFF” to reduce power consumption.

+ 11 hidden pages