Panasonic SC-BTT490, SC-BTT583, SC-BTT790 User Manual

GNGSGA

Operating Instructions

Blu-ray Disc

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference.

Home Theater Sound System

Model No. SC-BTT790

Unless otherwise indicated, illustrations in these operating instructions are of SC-BTT790.

SC-BTT583 SC-BTT490

VQT3Z79-1

Safety precautions

Fuse cover

Figure A Figure B

Fuse (5 ampere)

WARNING

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing. ≥ Do not place objects filled with liquids, such as vases, on this

unit.

≥ Use only the recommended accessories. ≥ Do not remove covers. ≥ Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

≥ Do not let metal objects fall inside this unit. ≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage, ≥ Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet. ≥ Do not pull, bend, or place heavy items on the lead. ≥ Do not handle the plug with wet hands. ≥ Hold onto the mains plug body when disconnecting the plug. ≥ Do not use a damaged mains plug or socket outlet.

Install this unit so that the AC mains lead can be unplugged from the socket outlet immediately if any problem occurs.

Small object

≥ Keep the Memory Card out of reach of children to prevent

swallowing.

≥ Keep the screws out of reach of children to prevent swallowing.

CAUTION

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles,

on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

≥ [For[Australia[and[New[Zealand]

This unit is intended for use in moderate climates.

≥ [Except[Australia[and[New[Zealand]

This unit is intended for use in tropical climates.

≥ [BTT790]

Product Identification Marking is located on the bottom of the wireless system.

Placement

Place this unit on an even surface. To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or

in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

≥ Do not expose this unit to direct sunlight, high temperatures,

high humidity, and excessive vibration.

VQT3Z79

Speaker

≥ Use only supplied speakers

The main unit and supplied speakers are to be used only as indicated in these operating instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥ Be careful not to cross (short-circuit) or reverse the polarity of

the speaker wires as doing so may damage the speakers.

≥ Do not hold the speaker in one hand to avoid injury by dropping

the speaker when carrying.

≥ You can damage your speakers and shorten their useful life if

you play sound at high levels over extended periods.

≥

Do not touch the front netted area of the speakers. Hold by the sides.

≥ When carrying speakers, hold the stand and base parts. ≥ Place speakers on flat, secure surfaces. ≥ To avoid injury by falling or dropping the speaker, place the

speaker cables with care not to stumble or hook.

≥ Do not stand on the base for the speaker. Be cautious when

children are near.

Batteries

Mishandling of batteries can cause electrolyte leakage and may cause a fire. ≥ Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.

≥ When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same

time.

≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit. ≥ Do not recharge alkaline or manganese batteries. ≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.

(For Soudi Arabia and Kuwait)

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1 Open the fuse cover with a screwdriver.

2 Replace the fuse and close or attach the fuse cover.

Table of contents

Safety precautions......................................... 2

Getting started

Package contents and accessories ................. 4

Unit and media care......................................... 5

Playable media ................................................ 6

Control reference guide ................................... 8

STEP 1: Positioning ....................................... 10

STEP 2: Preparing the speakers ................... 11

STEP 3: Connections..................................... 12

STEP 4: Connecting the AC mains lead ........ 17

STEP 5: Preparing the wireless system......... 17

STEP 6: Settings............................................ 18

•Easy Setting ......................................................... 18

•Easy Network Setting ........................................... 18

•Firmware updates ................................................ 19

Inserting or removing media .......................... 20

Enjoying TV with unit’s speakers ................... 20

HOME menu .................................................. 21

Multi User Mode............................................. 22

Playback

Playback ........................................................ 23

Using the iPod/iPhone ................................... 25

•iPod/iPhone Connection ....................................... 26

•iPod/iPhone Playback .......................................... 26

TV & Radio

VIERA Link “HDAVI Control

•Enjoying TV and STB with unit’s speakers .......... 28

Listening to the Radio .....................................29

”...........................................27

Advanced operations

VIERA Connect (Enjoying Internet Service) ...30

Home Network feature....................................31

Option menu ...................................................32

Setup menu ....................................................35

•Speaker settings .................................................. 41

Enjoying sound effects from all speakers .......42

Speaker installation option..............................42

Reference

Troubleshooting guide ....................................44

Messages .......................................................48

Specifications..................................................50

Supplemental information ...............................52

Getting started TV & Radio PlaybackReference

Advanced

operations

[For[Australia[and[Ne w[Zealand]

Precautions of Wireless LAN connection

The following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit. Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be intercepted and monitored. ≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow the following points:

jDo not expose this unit to high temperatures or direct sunlight. jDo not bend, or subject this unit to strong impacts. jKeep this unit away from moisture. jDo not disassemble or alter this unit in any way.

≥Restriction on use of unauthorized copied content (> 51)



≥ Please note that the actual controls and components, menu items, etc. may look somewhat different from those shown in the

illustrations in these Operating Instructions.

VQT3Z79

Getting started

(Stands)

(Speakers)

(Bases)

(Screws)

(Speaker cable)

Main unit Main unit

Main unit

(Speaker cables)

(Speakers)

(Stands)

(Bases)

(Screws)

Wireless system

Package contents and accessories

Check the package contents and supplied accessories before using this unit.

Package contents

CENTER

SUBWOOFER

FRONT

SURROUNDSURROUND

CENTER

SUBWOOFER

FRONTFRONT

SURROUND

CENTER

SUBWOOFER

VQT3Z79

Accessories

∏ 1 Remote control

(N2QAYB000729)

∏ AC mains lead*

[BTT790]

2 for Australia and New Zealand 4 for the Middle East and South

East Asia

∏ 1 FM indoor antenna ∏ 1 Video cable

[BTT583] [BTT490]

1 for Australia and New Zealand 2 for the Middle East and South

∏ 2 Batteries for

remote control

* See page 17 for more information.

East Asia

∏

[BTT790]

1 Digital transmitter

∏ 1 Sheet of speaker

cable sticker



≥ Product numbers provided in these operating instructions correct as of January 2012. These may be subject to change. ≥ Do not use AC mains lead with other equipment.

Unit and media care

∫ Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

Lens cleaner: RP-CL720AE ≥ This lens cleaner may not be for sale

depending on the region.

≥ This lens cleaner is sold as specific for DIGA,

but can be used on this unit as well.

∫ Clean discs

DO DO NOT

Wipe with a damp cloth and then wipe dry.

∫ Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs. ≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or any other solvent.

≥ Clean any dust, water, or foreign matter from

the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs etc.). – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart

shapes.

∫ To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (> 44, “To return all settings to the factory preset.”) ≥ The operation history may be recorded in the

memory of this unit.

Getting started

VQT3Z79

Playable media

DVD

USB

Device Disc markings Device types Contents format

BD-Video Video

BD-RE Video, JPEG, MPO

BD-R

DVD-Video Video

DVD-R

DVD-R DL

DVD-RW

—

SD Memory Card (from 8 MB to 2 GB)

SDHC Memory Card (from 4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro types)

+R/+RW/+R DL

Music CD Music [CD-DA]

CD-R

CD-RW

Video, DivX®, MKV

Video, AVCHD, DivX®, MKV, JPEG, MPO, FLAC, MP3, WAV

Video, AVCHD

DivX®, MKV, JPEG, MPO, FLAC, MP3, Music [CD-DA], WAV

AVCHD, AVCHD 3D, MP4, MPEG2, JPEG, MPO

—

≥ See pages 7 and 51 for more information on the types of content that can be played.

VQT3Z79

USB devices

(up to 2 TB)

DivX®, MKV, MP4, MPEG, JPEG, MPO, FLAC, MP3, WAV

∫

Discs that cannot be played by this unit

≥ DVD-RAM ≥ Super Audio CD ≥ Photo CD ≥ DVD-Audio ≥ Video CD and Super Video CD ≥ WMA discs ≥ DivX Plus HD discs ≥ HD DVD

∫ Region management information

BD-Video

[For]South]East]Asia]

This unit can play BD-Video discs supporting the region code “A”. Example:

[For[Australia[and[New[Zealand] [For]the]Middle] East] This unit can play BD-Video discs supporting the region code “B”.

Example:

DVD-Video

[For]the]Middle]East]

This unit can play DVD-Video discs supporting the region number “2” or “ALL”. Example:

2 ALL

[For]South]East]Asia]

This unit can play DVD-Video discs supporting the region number “3” or “ALL”. Example:

3 ALL

[For[Australia[and[New[Zealand]

This unit can play DVD-Video discs supporting the region number “4” or “ALL”. Example:

4 ALL

∫ Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.

∫ BD-Video

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video.

∫ 3D

≥

3D videos and 3D still pictures can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI Cable.

≥ 2D video can be enjoyed as 3D virtually. (> 35)

∫ Music CD

Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.

∫ SD card

≥

miniSD Cards, microSD Cards, microSDHC Cards and microSDXC Cards can be used, but must be used with an adaptor card. These are usually supplied with such cards, or otherwise customer provided.

≥ To protect the card’s contents, move

the record prevention tab (on the SD card) to “LOCK”.

≥

This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and FAT16 formats, as well as SDHC Memory Cards in FAT32 format (Does not support long file names.) and SDXC Memory Cards in exFAT.

≥ If the SD card is used with incompatible

computers or devices, recorded contents may be erased due to the card being formatted etc.

≥ Useable memory may be slightly less than the

card capacity.

∫ USB device

≥ This unit does not guarantee connection with all

USB devices.

≥

This unit does not support USB device charging.

≥ FAT12, FAT16, FAT32 and NTFS file systems

are supported.

≥ This unit supports USB2.0 High Speed. ≥

This unit can support an HDD formatted to FAT32 and NTFS. Some types of HDD may require the use of its external power supply unit.

∫ BD-RE, BD-R

Discs recorded in DR mode using Panasonic Blu-ray Disc recorders may not play back the audio etc., correctly.



≥

It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created.

≥

The producers of the disc can control how discs are played, so you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

VQT3Z79

Getting started

Control reference guide

ラ

ヰ

ヮ

ユ

モヷ

ンユヵヶンワ

ヴレリヱ

ヱロモヺ

ヱモヶヴユ

ヴヵヰヱ

ヴユモンヤラヴユモンヤラ

ヴロヰヸ

ヴレリヱ

リワヱヶヵ

ユヹリヵ

ㄊヱㄐㄅ

ュリヴヤ

ヱ

ヰ

ヱ

ノ

ヶ

ヱ

チ

ヮ

ユ

ワ

ヶ

チ

ヵ

ヰ

ヱ

チ

ヮ

ユ

ワ

ヶ

モヶュリヰ

ユ

リ

ワ

ヵ

ユ

ン

ワ

ヵ

ヱリヱ

10 11



R6/LR6, AA



(Alkaline or manganese batteries)

Remote control

VQT3Z79

∫ Using the remote control

Insert so the poles (i and j) match those in the remote control.

Point it at the remote control signal sensor on this unit. (> 9)

1 Turn the unit on and off 2 Select title numbers, etc./Enter numbers or

characters

[CANCEL]: Cancel 3 Select the source 4 Basic playback control buttons (> 23) 5 Select preset radio stations (> 29) 6 Show status messages (> 24) 7 Show the Home screen of the VIERA

Connect (> 30) 8[3, 4, 2, 1] :

Move the highlight for selection

[OK] : Confirm the selection

(2;)(;1) : Frame-by-frame (> 23) 9 Show OPTION menu (> 32) 10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

display 11 Set the sound mode (> 42) 12 Select surround sound effects (> 42)/Set the

sleep timer

1 Press and hold [jSLEEP].

2 While “SLEEP ££” is displayed, press

[jSLEEP] several times to select the time (in minutes).

≥ Timer selection is up to 120 minutes.

≥ Select “OFF” when cancelling the setting.

≥ To confirm the remaining time

Press and hold the button again.

13 TV operation buttons

[Í TV]: Turn the television on and off

[AV, INPUT]: Switch the input select

[ijVOL] : Adjust the volume 14 Adjust the volume of the main unit 15 Select audio (> 23) 16 Mute the sound

≥ “MUTE” flashes on the unit’s display, while

the function is on.

≥ To cancel, press the button again or adjust

the volume.

≥ Muting is cancelled if the unit is turned off. 17 Switch on/off Secondary Video

(Picture-in-picture) 18 Select radio stations manually (> 29) 19 Exit the menu screen 20 Show HOME menu (> 21) 21 Show Pop-up Menu/Top Menu (> 24) 22 Return to previous screen 23 Start up a video communication (> 30) 24 Select speaker channel (> 42)

Main unit (Front)

VOL

OPEN/CLOSE

SD CARD

iPod

123

457611910

1 2 3 4 5 6 7 1311 128 9 10

Getting started

1 Standby/on switch (Í/I) (> 18)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit

is still consuming a small amount of power. 2 Open or close the disc tray (> 20) 3 Adjust the volume of the main unit 4 Disc tray 5 Stop (> 23)

7 SD card slot (> 20) 8USB port (> 20) 9 Remote control signal sensor

Distance: within approx. 7 m. Angle: Approx. 20e up and down, 30e left and

right 10 Display 11 Dock for iPod/iPhone (> 26)

6 Start play (> 23)

Main unit (Rear)

1 AC IN terminal (> 17) 2 Speaker terminals (> 12) 3 Cooling fan 4 LAN port (> 16) 5 USB port (> 16, 30) 6 HDMI AV OUT (ARC) terminal (> 13, 15)

7 HDMI1 IN (CABLE/SAT) terminal (> 15) 8 HDMI2 IN terminal (> 15) 9 DIGITAL AUDIO IN terminal (> 13, 14, 15) 10 FM radio antenna terminal (> 14) 11 AUX terminal (> 14) 12 VIDEO OUT terminal (> 14) 13 Digital transmitter dock for wireless system 14 [Except[Australia[and[New[Zealand]

AC Voltage selector (> 17)

220

240V

240V 127V

127V

110

VOLT ADJ

VQT3Z79

STEP 1: Positioning











120°

60°

e.g., [BTT790]

Wireless LAN:

Cordless phone

Wireless system

For optimum position

Place the front, centre and surround speakers at approximately the same distance from the seating position. ≥ Adjust the volume using the Delay time function if the distance between each speaker and the

seating position is not equal. (> 41)

A Centre speaker

≥

Put on a rack or shelf not to interfere with the TV’s various sensors (ambient light, etc.). Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV.

B Front speakers C Subwoofer D Surround speakers

≥ Place the speakers at the same height or

higher than ear level.

E [BTT790] Wireless system

≥ To avoid interference, maintain approx. 2 m

between the wireless system and other electronic devices that use the same radio frequency (2.4 GHz band).



≥ Place the wireless system within approximately 10 m from the main unit. ≥ To allow for proper ventilation and to maintain good airflow around the wireless system, position it with at least 5 cm of space

on all sides.

≥ Do not use the wireless system or the digital transmitter in a metal cabinet or bookshelf. ≥ Keep your speakers at least 10 mm away from the system for proper ventilation. ≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick

curtains.

≥ For optional wall mount, refer to page 42.

[BTT583] [BTT490]

∫ Enjoy surround speaker sound wirelessly

Use the optional Panasonic wireless system (SH-FX71).

∫ Upgrade to 7.1-channel system

The main unit is designed to enjoy the 7.1ch surround sound. A more theatre-like effect is possible with a wireless connection.

Necessary equipment:

≥ Wireless system (SH-FX71)

[BTT790] 1 optional system [BTT583] [BTT490] 2 optional systems

≥ 2 additional speakers [Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]



≥ For more details, refer to the operating instructions for SH-FX71. ≥ The WIRELESS LINK indicator lights green when this unit and SH-FX71 are connected wirelessly. You can also check the

link status if you press and hold the [SOUND] of this unit. When WIRELESS LINK is turned on, the main unit's display shows the message, “WIRELESS SPEAKERS LINKED”.

VQT3Z79

STEP 2: Preparing the speakers

Thread the speaker cable through the base.

Slide the speaker cable into the groove.

Speaker cable

Back of the base





Assembling the front and surround speakers

[BTT790] Front speakers, Surround speakers [BTT490] Front speakers

1 Attach the stand to the base. 2 Tighten the 3 screws (supplied) securely.

3 Attach the speaker. 4 Tighten the screw (supplied) securely.

[BTT583] Front speakers

1 Thread the speaker cable.

≥ Use suitable speaker cables for each speaker type. (> 12)

2 Pull the cable and slide into the groove.

Getting started

≥

When attaching the speakers to a wall (>42)

Remove the base.



≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥

When reattaching the base to the speaker

Put the base on the speaker, and then do the base removal operation in reverse order.

VQT3Z79

Connecting the speaker cables

SURROUND

Lch



Push

r: White s: Blue line

Speaker cable sticker (supplied)

Connector

Speaker indication

LS / RB LB / RS

SPEAKERS ENCEINTES

SURROUND (3 - 6

)

AMBIOPHONIQUES

SURR

L SIDERSIDE

Wireless

system

Surround selector

Set in the centre position.

Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.

[BTT583] [BTT490]

≥ When connecting speakers with the optional wireless system SH-FX71 (> 10), use the supplied

speaker cables of SH-FX71.

e.g., [BTT583] [BTT490] Surround speaker

Speaker cable sticker Connector

1 FRONT Lch 1 WHITE

2 FRONT Rch 2 RED

3 SURROUND Lch 3 BLUE

4 SURROUND Rch 4 GREY

5 CENTER 5 GREEN

6 SUBWOOFER 6 PURPLE

STEP 3: Connections

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are complete.

Speaker connection

Connect the speaker cables to the terminals of the same colour.

[BTT790]

VQT3Z79

[BTT583] [BTT490]

HDMI cable (not supplied)

Optical digital audio cable* (not supplied)

Connection to a TV

∫ HDMI

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters or less. Recommended part number (High Speed HDMI Cable): RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.

≥

Audio will be output through the system’s speakers when “Off” is selected in “HDMI Audio Output”. (>37)

∫ TV Audio

≥ To output TV audio from this unit's speakers, you need to switch the selector. (>20)

∫ OPTICAL IN

≥ After making the digital audio connection, make settings to suit the type of audio from your digital

equipment. (> 37)



≥ Do not make the video connections through the VCR.

Due to copy guard protection, the picture may not display properly.

Getting started

Best quality

OPTICAL

HDMI

OUT

* If the HDMI terminal on the TV is labelled “HDMI (ARC)”, the connection of the optical digital audio cable is not required.

What is ARC?

ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home theatre system to receive and play audio from the TV through a signal HDMI cable without additional wiring.

VQT3Z79

Standard picture and better audio

OPTICAL

OUT

VIDEO IN

AUDIO IN

Optical digital audio cable (not supplied)

Video cable (supplied)

VIDEO IN

AUDIO IN

AUDIO OUT

Audio cable (not supplied)

Video cable (supplied)

Affix this end of the antenna to a wall or pillar where the reception is best.

FM indoor antenna (supplied)

Standard picture and audio

FM antenna connection



≥ Use an FM outdoor antenna if radio reception is poor.

VQT3Z79

Other device connection

AV IN

(ARC)

AV OU T

e.g.,

Set Top Box, etc.

Video game, etc.

HDMI cable (not supplied)

OPTICAL

OUT

e.g.,

Optical digital audio cable (not supplied)

Set Top Box, etc.

Insert fully until you hear a click.

Do not insert or remove while the home theatre unit is on.

Make sure that the digital transmitter is fully inserted. If the digital transmitter is not fully inserted, the sound may not be available from the surround speakers.

DO NOT

∫ When the connecting devices have an HDMI terminal



HDMI standby pass-through

Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT) or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this system). Even while the unit is in the standby mode, you can change the input signal HDMI1 IN (CABLE/SAT) or HDMI2 IN by pressing [EXT-IN] on the remote control.

∫ When the connecting devices do not have an HDMI terminal

Getting started

[BTT790] Digital transmitter connection

VQT3Z79

Connecting to the network

Wireless router, etc.

Internet

Wireless router, etc.

Internet

LAN Cable (not supplied)

Internet

Broadband router, etc.

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (> 19) ≥ You can enjoy BD-Live (> 24) ≥ You can enjoy VIERA Connect (> 30) ≥ You can access other devices (Home Network)

(> 31)

For details about connection method, refer to the instructions supplied with the connected equipment.

Wireless LAN connection

[For[Australia[and[New[Zealand] This unit can be connected to a wireless router wirelessly.

≥ [For[Australia[ and[ New[Zealand]

This unit supports Wi-Fi Direct

and can make a wireless connection to wireless devices without router. You can use this function when enjoying Home Network feature, etc. Internet access is not available while connected via Wi-Fi Direct

. (> 31, 38)

[Except[Australia[and[New[Zealand]

Connect the Wireless LAN Adaptor Read the operating instructions for DY-WL

(optional). Only

thoroughly when using it.

DY-WL5

can be used.

DY-WL5

≥ A wireless LAN connection can be used only in those countries where the wireless function is

authorized for use. Use of a wireless LAN connection is prohibited in the regions where DY-WL5 is not sold.

≥ For up-to-date compatibility information on your wireless router, refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.

LAN cable connection

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. ≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

VQT3Z79

STEP 4: Connecting the AC mains lead

AC IN

VOLT ADJ

110

127V

220

240V

Before connecting the AC mains lead;

Set the voltage at the bottom of the main unit.

≥ Use a flat-head screwdriver to move the voltage

selector to the appropriate position for the area in which this system is used.

AC mains lead (supplied)

* The cord with a ferrite core

is for the wireless system.

To a household mains socket

[Except[Australi a[and[New[Zealand]

WIRELESS LINK

Wireless

system

Press [C I, BÍ] on the wireless system.

C I: The wireless system is on. BÍ: The wireless system is off.

The wireless system consumes a small amount of power, even when it is off

WIRELESS LINK indicator Red:

The wireless system is on and the wireless link is deactivated.

Green:

The wireless system is on and the wireless link is activated.

Connect only after all other connections are complete.

Getting started

[For]the]Middle]East]

Use the AC mains lead that matches the socket for the area you live in.

[For]South]East]Asia]

AC mains lead with a label is for Thailand. AC mains lead without a label is for areas other than Thailand.

(For Saudi Arabia and Kuwait)

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.

≥ The wireless system ([BTT790]) and the main unit consume a small amount of AC power (> 50, 51)

even when turned off. In the interest of power conservation, if you will not be using them for an extended period of time, they can be disconnected.

STEP 5: Preparing the wireless system

[BTT790]

Turn on the wireless system after all connections are complete.

VQT3Z79

+ 39 hidden pages