Loading...
Thank you for choosing
PanasonicOmnivislan VBS
MODELS PV-M2048/PV-M2058
Easy Taping.
Operating
Instructions
Please read these instructions carefully before attempting to connect, operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
Quia para rápida consulta en español está ineludo.
5S 2
Si S
QD 0)
o
< 2
Oo)
Í
5 2
<D ^
s
«"0
^—*i
c t |
“ |
o |
O T3 Q) CO
3
&> <o
Things You Should Know
Congratulations
on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you and your family years of enjoyment. Please fill in the information at right. The serial
number is on the tag located on the back of your Combination VCR.
Safety Precautions
Date of Purchase____
Dealer Purchased From
Dealer Address
Dealer Phone No,
Model No._____
Serial No._____ ^
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ ( High Quality) System, is compatible with existing VHS equipment. Only use those tapes with the [ffiSmark. It is recommended that only cassette tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.
A A
CAUTIONTOREDUCETHERISK:OFELECTRICSHOCK.
DOHOTREMOVECOVER(ORSACK)
NOUSER-SERVlCEAfiLEPARTSINStOE
REFERSERVICINGTOQUAUnEOSERVICEPERSONNEL
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
Things You Should Know...................................................................................................................................................................... |
2 |
Important Safeguards and Precautions................................................................................................................................................ |
3 |
Unpacking Your Combination VCR • Product Features....................................................................................................................... |
4 |
Antenna or Cable Connections (Qutdoor Antenna, Cable Box, Scrambled/Unscrambled Channels)................................................ |
5 |
Location of Controls (Remote Control, Combination VCR)............................................................................................................ |
6,7 |
One Time Setup (On-Screen Language, Channel Memory, Auto Clock Set)................................................................................ |
8, 9 |
On-Screen Displays (OSD) (Function, channel, Menu, VCR Status/Clock, Warning, Instruction)................................................... |
10 |
TV Operation (Main Operation, Using the 100 key, Rapid Tune, Audio Mute, Phones, SELF-DEMO Mode, NITE/GAME mode).11 |
|
Picture Adjustment (Color, Tint, Brightness, Picture, Sharpness, Reset)......................................................................................... |
12 |
TV Timer Features (Alarm Timer, Sleep Timer)................................................................................................................................. |
13 |
Closed Caption System (Main operation. Caption Or Mute)............................................................................................................. |
14 |
FM Radio............................................................................................................................................................................................ |
15 |
Playback a Tape (Main operation, Special Effects, Quality Picture Features).................................................................................. |
16 |
Record On a Tape (Main operation. One Touch Record, Input Select)............................................................................................ |
17 |
Timer Recording (Main Operation, Cancel, Clear or Replace Program Contents)................................................................... |
18,19 |
Copying Your Tapes (Connection, Main Operation).......................................................................................................................... |
20 |
Special VCR Features (Channel Caption, Time Stamp, Blue Back ON/OFF, VCR Lock, Warning Beeper)................... |
21,22, 23 |
Tape Operation (index Search, Repeat Play, One Minute Skip, Zero Search, Auto Functions)...................................... |
24, 25, 26 |
MTS Broadcast /TV Stereo System (Stereo/SAP/Mono Broadcast, Select Audio Mode) <For Model PV-M2058 only>............... |
27 |
VCR Plus+ Setup....................................................................................................................................................................... |
28, 29 |
VCR Plus-F Programming.................................................................................................................................................................. |
30 |
Cable Box Universal Remote Control Operation (Main Operation, DSS and Cable Box Code List) <For Model PV-M2058 only> ...31 |
|
Unit and Cassette Information........................................................................................................................................................... |
32 |
Before Requesting Service (Self-check items).................................................................................................................................. |
33 |
Service Center List............................................................................................................................................................................. |
34 |
Warranty............................................................................................................................................................................................. |
35 |
Spanish Quick Use Guide/Guia para rápida consulta.................................................................................................................. |
36-39 |
2
Important Safeguards and Precautions
FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE UNIT
INSTALLATION
1POWER SOURCE CAUTION
Operate only from a power source indicated on the unit or in this manual.
If necessary, have your Etectric Utility Service Company or Video Products Dealer verify the power source in your home.
2POLARIZED OR GROUNDING PLUG
As a safety feature, this Video product comes with either a polarized power cord plug (one blade is wider than the other), or a three-wire grounding type plug.
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you cannot fully insert the plug, try reversing it. If it still will not fit, have an electrician install the proper wail outlet. Do not defeat the safety feature by tampering with the plug.
GROUNDING PLUG CAUTION:
This plug will only fit into a three-hofe grounding outlet. If necessary, have an electrician install the proper outlet. Do not defeat the safety feature by tampering with the plug,
3POWER CORD
Make sure power cords are routed so that they are not likely to have anything rest on them, roll over them, or be in the way of walking traffic.
If an extension cord is used, make sure it also has either a polarized or grounded plug and that the cords can be securely connected.
Frayed cords, damaged plugs, and damaged or cracked wire insulation are hazardous and shouid be replaced by a qualified service technician. Overloaded outlets and extension cords are fire hazards and should be avoided.
4DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat generated during operation. If they are blocked, heat build-up inside the unit can cause faiiures that may result in a fire hazard or heat damage to cassettes. For protection follow these rules:
a.Never cover ventilation slots or the unit while in use, or operate the unit when placed on a bed, sofa, rug, or other soft surface.
b.Avoid built-in installation, such as a book case or rack, unless proper ventilation is provided.
5AVOID EXTREMELY HOT LOCATIONS OR SUDDEN TEMPERATURE CHANGES
Do not place the unit over or near any kind of heater or reguiator, in direct sunlight, inside a closed vehicle, etc.. Do not move the unit suddenly between areas of extreme temperature variation. If the unit is suddenly moved from a cold place to a warm place, moisture may condense in the unit and on the tape.
6TO AVOID PERSONAL INJURY
*Do not place unsecured equipment on a sloping surface.
*Do not place this unit on any support that is not firm, level and adequately strong. The unit could fall causing serious injury to child or
adult and damage to the unit.
•An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn,
•Carefully follow all operating instructions and use the manufacturer’s
recommended accessories when operating this unit or connecting it to any other equipment.
OUTDOOR ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable system is connected to the equipment, be sure the antenna or cable system is grounded so as to provide some protection against
built up static charges and voltage surges. Section 810 of the National Electrical Code, ANSI/NFPA 70 (in
Canada, part 1 of the
Canadian Eiectrical Code) -«*TION«.EL£CTR»C*LCODE
GROUND CLAMPS
POWER SERVICE QROUNDMQ ELECTRODE SYSTEM
(NEC ART 2SQ, PART H)
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS
An outside antenna system should be located well away from power lines, electric light or power circuits and where it will never come into contact with these power sources if it should happen to fall. When installing an outside antenna, extreme care should be taken to avoid touching power lines, circuits or other power sources as this could be fatal. Because of the hazards involved, antenna installation should be left to a professional.
USING THE VIDEO UNIT
If the unit has been in storage or moved to a new location, refer first to the INSTALLATION section of these safeguards.
1KEEP THIS VIDEO UNIT AWAY FROM WATER OR MOISTURE OF ANY KIND.
2IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR STRONG IMPACT, unplug the unit and have it inspected by a qualified sen/ice technician before use.
3DURING AN ELECTRICAL STORM
During a lightning storm, whether indoors or outdoors, or before leaving the unit unused for extended periods of time, disconnect all equipment from the power source as well as the antenna and cable system.
4WHEN THE UNIT IS PLUGGED IN
•Never expose the unit to rain or water. DO NOT OPERATE if liquid has been spilled into the unit. Immediately unplug the unit, and have it inspected by a service technician. Fire and shock hazards can result from electrical shorts caused by liquid contact inside.
•Never drop or press any object through openings in the unit. Some internal parts carry hazardous voltages and contact can cause electric shock or fire hazard.
•Avoid placing the unit directly above or below your TV set as this may cause electrical interference. Keep all magnets away from electronic equipment.
5USING ACCESSORIES
Use only accessories recommended by the manufacturer to avoid risk of fire, shock, or other hazards.
6CLEANING THE UNIT
Unplug the unit. Then, use a clean, dry, chemically untreated cloth to gently remove dust or debris, DO NOT USE cleaning fluids, aerosols, or forced air that could over-spray, or seep into the unit and cause electrical shock. Any substance such as wax, adhesive tape, etc. may mar the cabinet surface.
Exposure to greasy, humid, or dusty areas may adversely affect internal parts.
SERVICE
DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, this Video product does not operate properly, do not attempt to open or remove covers, or make any adjustments not described in the manual. Unplug the unit and contact a qualified sen/ice technician.
IF REPLACEMENT PARTS ARE REQUIRED
Make sure the service technician uses only parts specified by the manufacturer, or those having the same safety characteristics as the original parts. The use of unauthorized substitutes may result in fire, electric shock, or other hazards,
HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK
After any service or repairs to the unit, request the service technician to conduct a thorough safety check as described in the manufacture's service literature to insure that the video unit is in safe operating condition.
Unpacking Your Combination VCR • Product Features
Unpacking Your
Combination VCR
The accessories shown below are provided to help you use or set up your Combination VCR.
Load the batteries
Press in and up on the latch with your thumb nail and lift off the lid.
Accessories
Remote Control
VSQS1563(PV-M2048)
VSQS1564{PV-M2058)
)
______ )
2 “AA” Batteries
Model PV-M2058 remote is shown here.
Install two batteries as indicated inside the Battery Compartment.
Fit the lid’s hinge piece into the indent on the case, and snap the lid into place.
Battery replacement caution
•Do not mix old and new batteries.
•Do not mix alkaline with manganese batteries.
To order accessories,
call toll free 1 -800-211 -PANA(7262).
Product Features_______________________________________
Alarm Timer..................................................................................................................................... |
13 |
All Channel Auto Set/181-CH TV/CABLE Tuner............................................................................... |
8 |
Auto Clock Set ............................................................................................................................... |
8, 9 |
Auto Daylight Saving Time.............................................................................................................. |
32 |
Auto Operation Functions (Auto Shut Off, Auto Playback, Rewind, Tape Eject, Power Off)............................. |
26 |
Auto Repeat Function ..................................................................................................................... |
26 |
Cable Box Universal Remote Control Feature<For Model PV-M2058 only>................................ |
31 |
Closed Caption System................................................................................................................... |
14 |
Easy-to-Read English/Spanish/French On-Screen Displays ........................................... |
8, 9,18, 19 |
FM Radio......................................................................................................................................... |
15 |
Front-mounted AA/ In Terminals................................................................................................ |
20, 28 |
MTS Broadcast System <For ModelPV-M2058 only> ................................................................... |
27 |
NITE/GAMEMode .......................................................................................................................... |
11 |
One Minute Skip.............................................................................................................................. |
26 |
One Month, 8 Program Auto Timer Recording.......................................................................... |
18, 19 |
One Touch Recording (OTR) ......................................................................................................... |
17 |
PanaBlack^'^ Picture Tube.............................................................................................................. |
16 |
Quick Play Mechanism.................................................................................................................... |
33 |
Rapid Tune..................................................................................................................................... |
11 |
Special Effects Playback................................................................................................................. |
16 |
Special VCR Features {Channel Caption, Time Stamp, Blue Back ON/OFF Feature, VCR Lock, Warning Beeper)....21 -23 |
|
VCR Plus+ Recording .................................................................................................................... |
30 |
VMS Index Search System (Direct Access Search, Program Index Search, Index Scan Search) ................ |
24, 25 |
Zero Search .................................................................................................................................... |
26 |
4
Antenna or Cable Connections
Outdoor Antenna Connection
Unhook the antenna from your previous TV or VCR and connect it to the back of the Combination VCR as shown in the diagram. If your antenna system has separate UHF and VHF lead-ins, you need a UHFA/HF Band Mixer (not supplied).
Cable Connections
(A) Without a Converter/Descrambler Box
With this connection, you can use your Combination VCR remote control to select channels for viewing and select unscrambled channels for timer recording. Scrambled channels may not be viewed or recorded with this connection.
(B) With a Converter/Descrambler Box
With this connection, you may record and view any channel including scrambled channels. Please note, however that channel selection must be made at the cable company converter box. Timer recording is limited to one channel at a time, and you can only view the channel you are recording.
(C) With a DSS Receiver
With this connection, you can record and view any channel including scrambled channels: channel selection must be made at the DSS Receiver. Also, you may program one channel for unattended recording.
NOTE:
The DSS receiver must be turned off to view programs from a cable box or antenna. See the DSS manual for details.
* DSS® is registered trademark of DIRECTV, INC. a unit of GM Hughed Electronics.
(Flat)Twin Lead
300 Ohm Cable UHFA/HF Band
Mixer (not supplied)
(Round) 75 Ohm coaxial Cable
%
300-75 ohm Transformer
from (not supplied)
Antenna
Back of (Flat)Twin Lead Combination VCR 300 Ohm Cable
(A) |
Back of Combination VCR |
from CABLE
(B)
Cable TV
To Watch and Record Scrambled/ Unscrambled Channels
Set the Combination VCR to the output channel of the cable converter box (e.g. CH3). Now, select channels to be viewed or recorded at the cable converter box.
FCC WARNING: Any unauthorized changes or modifications to this equipment would void the user’s authority to operate.
Note to CABLE System Installer
This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Location of Controls
Remote Control Buttons
NITE/GAME |
DSS CABLE <PV-M2058 only> |
See page 11. |
See page 31. |
|
RAPID TUNE |
|
See page 11. |
POWER
See pages 8,11.
CHANNEL UP/DOWN
SELECT UP/DOWN
See pages 8-15, 17-19, 21-26, 28-30.
ACTION
See pages 8-10,12,14,17, 21-23, 26, 28, 29.
NUMBERED KEY
See pages 9,11,15,17, 24, 30, 31.
INDEX
See pages 24, 25.
PAUSE
See pages 16, 17.
o © ©/ ,/^ © 0 0 * ^ ^
© ©
VOLUME UP/DOWN
SET/BACKSPACE
See pages 8-14,17-19, 21-26, 28-30.
PROGRAM
See pages 18,19, 30.
TRACKING UP/DOWN
See page 16.
SLEEP
See page 13.
FM/TV ENTER
See pages 15, 31.
----- ON-TIMER
See page 13.
FAST FORWARD/SEARCH
See pages 16, 24, 25.
STOP
See pages 16,17,19, 25.
RECORD/TIME
See page 17.
------ SPEED
See page 17.
ADD/DELETE
See pages 8, 9,13, 15,19, 21,29.
AUDIO <PV-M2058 only>
See pages 15, 27.
|
ZERO/1 MINUTE SKIP |
|
See page 26. |
|
SLOW |
|
See page 16. |
|
COUNTER RESET |
Model PV-M2058 remote |
See page 26. |
is shown here. |
|
Rear View of the Combination VCR
■VHFAJHF Antenna Input Terminal
In from your Antenna or Cable. See page 5.
STOP/EJECT |
REWINO/SEARCH |
PLAY/REPEAT |
FAST FORWARD/ |
See pages |
See pages |
See pages |
SEARCH |
16,17,19, 25. |
16, 24, 25. |
11, 16, 25,26. |
See pages 16, 24, 25. |
RECORD/ TIME
See pages 17, 23.
Indicators on the Front Panel
Model PV-M2058 unit Is shown here.
ON TIMER Indicator |
REPEAT Indicator |
Lights when the On |
Lights when “REPEAT PLAY: |
Timer is set. |
ON" is selected and playback |
See page 13. |
is in progress. |
|
See page 26. |
PROGRAM TIMER Indicator
Lights when the Combination VCR is set for Timer Recording. It flashes when a Timer Recording has been set with no tape inserted, the clock is not set, or the tape is in motion.
See pages 17-19, 30.
RECORD Indicator
Lights during recording. In Rec Pause or OTR Pause mode, the indicator flashes.
See page 17.
One Time Setup
•Important: If the remote control POWER,
CHAV , ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV and ADD/DLT button does not work when pressed, press the TVA/CR button on the remote and try the button again.
When the Combination VCR is turned on for the first time, it automatically enters the setup mode. Setup includes the following:
•Choose the language for on-screen menus and messages.
•Tell the Combination VCR how your equipment is hooked up (page 5) so the
Combination VCR can correctly place channels into memory.
•Get the Combination VCR ready for clock set.
To Set Language, Channels and Clock
1 Press POWER* to turn the Combination VCR on.
Z Press C H A V , or VOL ► for on |
SELECT UN6IIAGE |
||||
screen displays in English, |
|||||
|
|
|
|
||
Spanish or French. |
PUSH |
CH |
A |
:English |
|
OPRtMIR |
CH |
T |
lEapaftol |
||
• If you choose the wrong language, |
|||||
|
|
|
|
||
please see the “Reset alt Combination |
APP. VOL + tFranfais |
|
|||
VCR Memory Functions” section on page 32.
•If you use a cable box, the cable box must be left on for auto channel set.
1^' Check list before you begin.
Q Your Combination VCR is connected to an Antenna, or Cable system (see page 5).
Model PV-M2058 unit is shown here.
1 2-3-4
Using the |
keys |
Whenever a menu or program screen is displayed, CHANNEL
UP/DOWN and VOLUME UP/DOWN on the remote control function as AT
only. For VOLUME UP/DOWN functions, use the buttons on the Combination VCR.
Important: If you use a cable box, turn It on and select the PBS station in your time zone.
3 Press CH A to start Channel |
CHANNEl/aXK AUTO SET |
Auto Set and Clock Auto Set. |
CONNECT ANTENNA CABLE |
These on-screen displays will |
AND IF YOU USE A CABLE |
LOCAL PBS CH THEN. . . |
|
|
BOX, TUNE )T TO YOUR |
appear in sequence. |
PLEASE PUSH CH UP KEY |
|
•CH AUTO SET PROCEEDING
•CH AUTO SET COMPLETED
•AUTO CLOCK SET PROCEEDING
I------ or-------------
(base 1^ |
7/28/1998 TUE 12:00PM |
(case 2) |
|
|
DST: ON |
|
AUTO CLOCK SET |
|
SETTING : CH 10 |
|
|
|
AUTO CLOCK SET |
|
IS INCOMPLETE |
|
COMPLETED |
|
PUSH ACTION TO SET CLOCK |
|
END : PUSH CH UP KEY |
|
|
|
|
|
4 ^Case i) If the displayed time is correct, press CH A to exit.
•This concludes one time Combination VCR setup.
•See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the Combination VCR may have recognized the PBS channel (setting channel) in the wrong time zone. Please do the following to correct the situation.
a.Make a note of the SETTING: CH number shown on-screen and press CH A to exit.
b.Delete the setting channel from the Combination VCR channel memory. (See the Add or Delete a Channel section on the next page.)
C. Press ACTION to display the MAIN MENU.
d.Press AT4^ to select “CLOCK," and then press ACTION to display the SET CLOCK screen.
•If you use a cable box and have multiple PBS stations, tune the cable box to a different PBS station and try auto clock set again using the menu.
e.Press AT to select “AUTO CLOCK SET,” and then press ► to set and CH A to start Auto Clock set.
IMPORTANT NOTE FOR AUTO CLOCK SET
•Auto clock set will be performed when the Combination VCR is turned off the first time each day. If you use a cable box and you want auto clock set to be performed, the cable box must be left on and tuned to the PBS channel at the time the Combination VCR power is turned off.
•If you use a DSS receiver, it must be turned off for auto clock set.
•if you use Audio/Video Jack connection between the Combination VCR and Cable Box or DSS receiver, you must also connect the RF coaxial cable in order to use the auto clock set and channel auto set features.
•If for any reason the time is changed manually, automatic time correction will not occur.
8
If AUTO CLOCK SET IS INCOMPLETE ^ appears, please set the clock manually.
a.Press ACTION to display the SET
CLOCK screen.
b.Press to select and ► to
enter the month, date, year, time and DST. (Daylight Saving Time).
To Make Corrections,
repeatedly press O to move the cursor to the incorrect entry and make the correction.
c.Press ACTION twice to start the clock and exit the MAIN MENU.
^\) .......
ÉÎBsâÉii™*
SELECT : A ▼ KEY
SET :► KEY
END : ACTION KEY
“DST:ON" automatically adjusts for daylight
saving time. (See page 32.)
To Change the OSD Language
1 Press ACTION to display the MAIN MENU.
2 Press AT to select the language selection icon.
3 Press ACTION repeatedly to change the language as shown.
4 Press AT4^ to select “EXIT,” and then press ACTION to exit the MAIN MENU.
To Replace Channels in Memory
In case, you have cable installed, etc.
1 Press ACTION to display the MAIN MENU.
2 Press AT to select “CH,” and then press ACTION to
display the SET UP CHANNEL screen.
3 Press AT repeatedly to select “ANTENNA," and then press ► to select your antenna system (“TV” or “CABLE”).
4 Press AT to select “AUTO SET," and then press
► to start.
• To exit the SET UP CHANNEL screen, press ACTION twice.
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Press ACTION to display the MAIN MENU.
2 Press AT4^ to select “CLOCK." Then, press ACTION to display the SET CLOCK screen.
3 Press AT to select “MANUAL,” and then ► to display the SET CLOCK screen.
........... SET CLOCK -..................
AUTO CLOCK SET
l.trJillHl
SELECT:A ¥ KEY
SET : ► KEY
END ; ACT ION KEY
SET CLOCK
/|N
SELECT rA T KEY
SET :► KEY
END : ACT I ON KEY
4 Please do steps b
and c at the top of this page.
To Add or Delete a Channel
1 |
Select a channel |
CHANNEL 08 ADDED |
|
|
using the |
|
|
|
NUMBERED keys |
|
|
|
to add or CH AT |
|
|
2 |
to delete. |
|
|
Press |
ADD/DLT |
|
|
|
to add |
or delete |
|
the channel.
•To select a channel once it's deleted, use the NUMBERED keys.
This Combination VCR will accurately maintain its calendar up to Dec. 31,2089, 11:59PM.
Normal TV or Cable channels are automatically selected and placed in memory depending on how your Combination VCR is hooked up.
On-Screen Displays (OSD)
^Important: If the remote control POWER, CH AT , ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV and ADD/DLT button does not work when pressed, press the TVA/CR button on the remote and try the button again.
Channel & Function Display
Whenever the channel is changed, the channel number will appear for a few seconds on-screen.
(Some station names may also appear if Channel Caption is set. See page 21.)
When a function button is
pressed (PLAY, FF, etc.), the Combination VCR mode will be displayed.
•When a recording is started, both REC and the channel number will appear together.
Menu Screen
1 Press ACTION* to display the MAIN MENU.
2 Press AT and ACTION to make your selection (see page 8).
® ® wLTOGBSE
SELECT : A T ^ ► KEY SET : ACT I ON KEY
•To get the most from each feature, please read the Operation Manual before attempting any operation.
VCR Status & Clock Display
Press DISPLAY to display and remove the overlay shown below.
|
Function |
Current |
|
Channel Caption |
||
|
Status |
Time |
|
(See page 21.) |
||
Rec Time |
|
|
|
|
|
|
|
RK 12:00AM |
|
ABC f |
|
||
|
|
|
|
|||
(OTR mode |
|
“0:25 -0:12:34 |
|
|
SP |
|
|
> STEREO«- |
|
|
|||
oniy see |
|
»SAP |
|
|
N |
|
|
MONO |
|
|
Tape Speed |
||
page 17.) |
|
/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- |
|
Receivable |
Broadcast |
|
|
|
|
|
Types (See page 27.) |
|
Tape Counter |
||||
<Model PV-M2058 only> |
|
|
|
|
||
Blank Tape/ No Video Signal Indication
Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with the “Blue Back ON/OFF Feature” (page 22) set to ON, the TV screen will turn solid blue.
Warning and Instruction Displays
These displays will alert you of a missed operation or provide further instructions.
If no active channels are found for CHANNEL MEMORY...
(see page 5.)
If you attempt to set or review a Timer Recording or set the On-Timer and the Clock is not set...
(see pages 8, 9 }
If you press REC on the remote control or the Combination VCR, and a cassette is inserted with no record tab...
(see page 17.)
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH CH UP KEY AGAIN
PLEASE SET CLOCK
BEFORE PROGRAMMING
CHECK CASSETTE
RECORD TAB
if you press STOP during a Timer Recording...
(see page 19.)
If you press PLAY, FF, REW, or REC on the remote control or the Combination VCR without a cassette inserted...
(see pages 16,17.)
If the Combination VCR is not in Stop mode or a cassette with record tab is not inserted two minutes before a Timer Recording is about to begin...
(see pages 18,19.)
If head cleaning becomes necessary while playing back a tape...
(see page 32.)
If you press a function button other than STOP/EJECT or POWER while the Combination VCR is in VCR Lock mode...
(See page 23.)
TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC
NO CASSETTE
PLEASE INSERT A CASSETTE
PLEASE PREPARE
FOR T IMER REC
VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL
END:PLAY KEY
VCR LOCK ACTIVATED
10
TV Operation
kX Check list before you begin.
□All connections are made (see page 5).
□Your Combination VCR is piugged in.
1
2
3
Press POWER to turn the Combination VCR on.
Select a channel using CH AT or the NUMBERED keys.
Press VOL to adjust the volume level.
Model PV-M2058 unit is shown here.
Using the 100 key
When selecting CABLE channels 100 to 125 with the NUMBERED keys, first press the 100 key, and then enter the remaining two digits. For example, for channel 125: Press NUMBERED keys 100-2-5.
Rapid Tune
Press R-TUNE to display the last channel you were watching,
• When seiecting channeis with CH AT, |
, |
the channels must be displayed for at |
|
least 4 seconds in order for the Combination |
|
VCR to recognize them as a new selection. CMOS |
|
Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
Phones
^ . rhannoi
OHIO
Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack.
SELF-DEMO Mode
In Power ON condition, hold down PLAY/REPEAT on the Combination VCR, with no tape inserted, for 5 seconds. The demo screen appears.
To cancel: Repeat the above operation. The demo screen disappears.
Model PV-M2058 remote is shown here.
NITE/GAME Mode Feature
This feature adjusts the color and picture intensity levels so the screen is easier on the eyes when watching a video or TV at night, or when playing video games.
Note: This Combination VCR contains no video game software.
Press NITE/GAME repeatedly to select the desired mode.
•"NITE" or "GAME” is displayed for 4 seconds.
•Each press of NITE/GAME will change the mode as shown below right.
•NITE mode may be selected when watching TV, playing a tape, or while in FM mode. GAME mode may only be selected when watching TV and playing video games.
To Cancel the NITE or GAME mode,
press NITE/GAME until the normal screen appears.
Normal screen (No display)
• The previous color and picture settings wilt be restored.
NITE mode is cancelled when:
• the power is turned Off • a power failure occurs GAME mode is cancelled when:
• the power is turned Off |
• play mode is entered |
• channel is changed |
• a power failure occurs |
• input signal is changed • FM mode is selected
11
^Picture Adjustment
‘Important: If the remote control POWER, CH AW , ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV and ADD/DLT button does not work when pressed, press the TVA/CR button on the remote and try the button again.
|\^Check list before you begin. |
1 Press ACTION* to display the |
Q All connections are made (see page 5). |
MAIN MENU. |
|
□ Your Combination VCR is piugged in.
Model PV-M2058 remote is shown here.
2 Press AWO^ to select “TV,” and then press ACTION to display the SET UP TV screen.
3 Press AT to select “VIDEO ADJUST,” and then press
► to display the VIDEO ADJUST screen.
4 Press AT repeatedly to select the desired adjust item, and then press to adjust. (See description below.)
SELECT : A T |
► KEY |
SET lACTION KEY |
|
.............. SET UP TV .....................
CAPTI ON
I NPirr SELECT : TUNER VIDEO ADJUST
SELECT:A T KEY
SET :► KEY
END :ACTION KEY
|
..... I.... |
TINT |
I........ |
BRIGHTNESS |
........... I........ |
PICTURE ............................. |
^ |
SHARPNESS ............ |
I........ |
NORMAL |
|
SELECT;* ▼ KEY
ADUUST:-« ► KEY
END lACTION KEY
To Reset Picture Controls to the Factory Setting
Press AT and ► to select and |
COLOR ...................... |
I........ |
set “NORMAL.” |
TINT |
I........ |
BRIGHTNESS ........... |
I........ |
|
All controls return to their factory |
PICTURE ............................. |
\ |
SHARPNESS ............ |
I........ |
|
settings. |
SELECT:* ▼ KEY |
|
|
|
|
|
SET : ► KEY |
|
|
END ;ACTION KEY |
|
5 Press ACTION three times to return to the normal screen.
•If no button is pressed within 5 minutes, the video adjust overlay disappears.
Picture Adjustment
COLOR Control
To adjust the intensity of the color.
TINT Control
To adjust for the most natural fleshtones.
BRIGHTNESS Control
To adjust the brightness of the picture.
PICTURE Control
To adjust the intensity of the picture by adjusting contrast and color level at the same time and in the proper balance.
SHARPNESS Control
To adjust the sharpness of the picture.
12
Loading...