URC-7540 |
Universal Remote
U S E R G U I D E & C O D E B O O K
Retain For Future Reference
Table of Contents
QUICK SET-UP |
2 |
QUICK SEARCH |
3 |
INSTALLING THE BATTERIES |
4 |
THE KEYPAD |
5 |
INSTALLATION |
|
Direct Set-Up |
7 |
The Search Method |
8 |
|
|
SET-UP CODES |
|
Quick Code Reference |
10 |
Televisions |
11 |
Video Recorders |
16 |
Satellite Receivers |
18 |
Cable Converters |
21 |
ADVANCED FEATURES |
|
Controlling Colour and Brightness |
22 |
Punch-Through |
22 |
Teletext and Fastext |
23 |
Menu |
24 |
Sleeptimer |
25 |
Scan |
27 |
The AUX Key |
28 |
Changing the Device Keys |
29 |
TROUBLE-SHOOTING |
|
Helpful Hints |
30 |
Consumer Help-Line |
31 |
About Your ONE FOR ALL 4
Your ONE FOR ALL 4 Package contains:
Your ONE FOR ALL 4 Remote
Your ONE FOR ALL 4 Manual
Your manual is divided into two parts: set-up instructions and device codes. You may need this guide again in the future, so please be sure to keep it.
Your ONE FOR ALL 4 needs 2 new “AA/LR03” batteries.
Your ONE FOR ALL 4 can operate four devices: a Television,
a Video Recorder, a Satellite Receiver and a second Television, Video or Satellite Receiver. Your ONE FOR ALL 4 can also operate Cable Converters.
Magic
Device
Keys
Number
Keys
Mute/OK
Volume-/
Menu Left
Rewind/
Text on
Play/Text off
TV/VCR/Red
Stop/Green
Menu
Power
LEDs
Programme+/
Menu up
Volume+/
Menu Right
Programme-/
Menu down
Fast Forward/
Expand
Pause/Hold
Teletext Keys
Slow/Blue
Record/Yellow
1
Quick Set-Up
The instructions below and on the next page can be used to quickly install your new ONE FOR ALL.
You can use the Quick Set-Up below with the codes listed on pages 11-21. If this doesn’t work, try the Quick Search on the next page. The Quick Search can also be used even if your brand is not listed at all.
1. Press device key:
or or or
2. Press and hold until the red light blinks twice. Then release.
3. Enter
(4-digit code). See pages 11-21. The red light will blink twice.
4. Aim remote at your device and press (or PLAY).
NOTES:
-Make sure your device is switched on.
-The instructions above are a ÒQuickÓ set-up guide. For further explanation, please refer to the pages within.
-Make sure you write your Set-Up codes in the boxes provided inside the battery compartment for easy future reference.
2
Quick Search
1. Aim your ONE FOR ALL at your device and press device key:
or or or
2. Press and hold until the red light blinks twice.
3. Press
4. Alternate between the
device key ( ie: |
) |
|
and |
until your |
|
device turns off. |
|
5. When device turns off, press . The red light will blink twice. Your device is Set Up.
NOTES:
-Make sure your device is switched on.
-Make sure you aim your ONE FOR ALL at your device during ÒQuick SearchÓ.
-During step 4, you may have to press these keys many times, so please be patient.
-If your VideoÕs original remote control does not have a power key, press PLAY instead of POWER during step 4.
3
Installing the Batteries
Your ONE FOR ALL 4 needs 2 new “AA/LR03” alkaline batteries.
1 |
Remove the battery cover from the |
back of your ONE FOR ALL 4 by |
|
|
pressing down on the tab. |
2
3
Match the batteries to the + and - marks inside the battery case, then insert the batteries.
Press the battery cover back into place.
Important notes:
-In order to avoid having to reprogram your ONE FOR ALL 4 after you remove the batteries, you will need to insert new batteries within 5 minutes. Also it is best that you do not use rechargable batteries.
-On the inside of the battery compartment door you will find a label on which to write your Set-Up codes after your ONE FOR ALL 4 is set up for your device. Please write down your codes for easy, future reference.
4
|
|
|
|
|
|
The Keypad |
Key |
|
|
|
|
|
Function |
|
|
|
|
|
|
|
LEDs |
|
|
|
|
|
LEDs |
|
|
|
|
|
|
The LEDs (Light Emitting Diode) flash red to |
|
|
|
|
|
|
show the remote is working. Over each |
|
|
|
|
|
|
device key (TV, VCR, SAT, AUX) there is a |
|
|
|
|
|
|
LED. During operation of the ONE FOR ALL |
|
|
|
|
|
|
these LEDS will indicate the mode you are |
|
|
|
|
|
|
using. |
|
|
|
|
|
|
MAGIC Key |
|
|
|
|
|
|
The MAGIC key is used to set up your ONE |
|
|
|
|
|
|
FOR ALL 4 and to access special functions. |
|
|
|
|
|
|
Menu |
|
|
|
|
|
|
The Menu key controls the same function as |
|
|
|
|
|
|
it did on your original remote. |
|
|
|
|
|
|
Power |
|
||||||
|
|
|
|
|
|
The Power key controls the same function as |
|
|
|
|
|
|
it did on your original remote. |
|
|
|
|
|
|
Device Keys |
|
|
|
|
|
|
The TV, VCR, SAT and AUX keys select the |
|
|
|
|
|
|
home entertainment device to be |
|
|
|
|
|
|
controlled. For example pressing the TV key |
|
|
|
|
|
|
allows the remote to control the functions |
|
|
|
|
|
|
of your Television, after pressing VCR you |
|
|
|
|
|
|
can operate your Video Cassette Recorder |
|
|
|
|
|
|
and the SAT key operates your Satellite |
|
|
|
|
|
|
Receiver or Cable Box. The AUX key |
|
|
|
|
|
|
operates a second television, video recorder |
|
|
|
|
|
|
or satellite. |
|
|
|
|
|
|
Volume, Programme |
|
|
|
|
|
|
The Volume and Programme keys control |
|
|
|
|
|
|
the two most frequently used functions of |
|
|
|
|
|
|
your Television and Satellite Receiver. They |
|
|
|
|
|
|
operate just as those on your original remote. |
|
|
|
|
|
|
These keys are also used to operate the menu |
|
|
|
|
|
|
feature of your device. See page 24 for |
|
|
|
|
|
|
more details. |
|
|
|
|
|
|
Mute |
|
|
|
|
|
|
The Mute key operates the same function it |
|
|
|
|
|
|
did on your orginal remote control. It is also |
|
|
|
|
|
|
used to activate the Scan feature (see page |
|
|
|
|
|
|
27). Also, if your original remote control |
|
|
|
|
|
|
required that you press an “OK” key during |
|
|
|
|
|
|
Menu operation, the Mute key can be used |
|
|
|
|
|
|
for this function. |
5
|
The Keypad |
Key |
Function |
_ |
Number Keys |
|
The Number keys (0-9, 10, 20) provide |
|
functions just like your original remote, such |
-/-- |
as direct access programme selection. If your |
original remote uses one/two digit input |
|
|
switching (-/-- symbol), this function can be |
|
obtained by pressing the -/-- key, which is the |
|
same as the 10 key. If your original remote |
|
has an AV, key this function can also be |
|
found under the 20 key. |
|
Video Recorder Keys |
|
After pressing the VCR key, the Video |
|
Recorder keys operate the functions of your |
|
Video Recorder. To prevent accidental |
|
recording, the Record key must be pressed |
|
twice to start recording. |
(on) |
Teletext Keys |
|
After pressing the TV key, the top row of |
||
|
||
(off) |
the VCR keys are used to operate the main |
|
teletext functions. The symbols below the |
||
|
||
(expand) |
keys are for teletext. The text keys are used |
|
to access the teletext functions of your |
||
(hold) |
Television. Of course, your Television must be |
|
teletext capable. For an explanation of the |
||
|
teletext symbols, please refer to page 23 of this |
|
|
manual. For a detailed explanation on how |
|
|
teletext works, please refer to the manual |
|
|
of your Television set. |
|
(red) |
After pressing the TV key, the bottom row |
|
of the Video Recorder keys marked red, |
||
|
green, yellow and blue, allow you to access |
|
(green) |
the fastext functions of your television. |
|
Again, your television must be fastext |
||
|
||
|
capable to operate these functions. For a |
|
(yellow) |
more detailed explanation of teletext and |
|
|
fastext, please refer to the manual of your |
|
(blue) |
television set. |
|
|
6
Installation
Direct Set-Up
Setting Up Your Devices
To set up the ONE FOR ALL 4 for your TV, VCR, Satellite and Cable Box, follow the instructions below.
To set up your TV:
1 |
|
|
FOR |
ALL |
|
||||
|
ONE |
|
|
|
|||||
|
|
|
|
|
|
|
|
||
|
0009 |
0093, |
0363,041 |
|
|||||
|
Acura |
0087, |
0216 |
|
|
|
|
||
|
0217, |
|
|
|
|
|
|
||
|
Admiral |
0264 |
|
|
|
|
|
|
|
|
Adyson |
0516 |
|
|
|
0037, |
0 |
||
|
Agazi |
0087 0009, |
|
||||||
|
AGB |
0216, |
0274 |
0371, |
|||||
|
Agef |
|
0037, |
0208, |
|
|
|||
|
Aiko |
|
0361, |
|
|
|
|
Find your Television code in the Set-Up Code section (starting on page
11). Codes are listed by brand name. The most popular code is listed first. Make sure your Television is switched on.
2 |
|
|
Press and release your ONE FOR ALL 4’s |
|
|
|
TV key, then press and hold down the |
||
|
|
|
MAGIC key until the red light blinks |
|
|
|
|
twice (the light will blink once then |
|
|
|
|
twice). |
|
3 |
|
|
Enter your four-digit TV code using the |
|
_ _ _ _ |
||||
number keys. The red light will blink |
||||
4 |
|
|
twice. |
|
|
|
|||
|
|
Now, aim the ONE FOR ALL 4 at your |
||
|
|
|||
|
|
Television and press POWER. If your |
||
|
|
|
Television switches off, your ONE FOR |
|
|
|
|
ALL 4 should be ready to run your |
|
|
|
|
Television. |
|
5 |
|
|
Turn your device back on and try all the |
|
|
|
remote’s functions to ensure they are |
working properly. If the functions do not work properly, repeat steps 1-5 using another code listed under your brand.
Write your code in the four boxes provided in the battery compartment and on page 10 for easy future reference.
Important notes:
-To set up your Video Recorder or Satellite, follow the same instructions above, only press the VCR or SAT key during step 2.
-To set up your Cable Box, follow the instructions above only press the SAT key during step 2.
-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.
-If your Television, Video or Satellite does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, try the search method described on page 8, even if your brand is not listed at all.
-If you change programmes on your Television through your Video Recorder, press VCR and not TV, before you use the programme keys.
-Remember, to control your device after the ONE FOR ALL is set up, you must press the device key first (TV, VCR, SAT).
-Write the codes for your devices in the boxes provided on page 10 and in the battery compartment for easy future reference.
7
Installation
The Search Method
If your Television, Video Recorder, Satellite Receiver or Cable Box does not respond to the ONE FOR ALL 4 after you have tried all the codes listed for your brand, try searching for your code. The Search Method may also work if your brand is not listed at all.
Let's say you cannot get your ONE FOR ALL 4 to control your Television.
To search for your TV code:
1
2
3
Switch your Television on.
Press the TV key on your ONE FOR ALL 4.
Aim the ONE FOR ALL 4 at your Television. Press and hold down MAGIC until the ONE FOR ALL 4’s red light blinks twice. Then, press 9 9 1. The red light will blink twice.
4 |
Now, alternate between TV and POWER, |
over and over, until your Television turns |
off. You may have to press these keys many times, so please be patient. Remember to keep pointing the ONE FOR ALL 4 at your Television when you press the POWER and TV keys.
5
6
When your Television turns off, press MAGIC. Don't forget, press MAGIC as soon as your Television turns off.
The ONE FOR ALL remote should now be ready to operate your device. Turn your device back on and try all the remote’s functions to ensure they are working properly. If some of the ONE FOR ALL’s commands are not operating correctly, try the search method again. You may be using the wrong code.
Important notes:
-To search for the code for your Video or Satellite follow the instructions above only press VCR or SAT during steps 2 and 4. To search for the code for your Cable Box, press SAT during step 2 and 4.
-If your Video's original remote control does not have a power key, press PLAY instead of POWER when searching for your code.
-During step 4, you may have to press these keys many times (up to 150!) so be patient. Remember you must aim the ONE FOR ALL at your device the entire time you are searching for your code.
8
Installation
After you have used the Search Method, you can find out which code the ONE FOR ALL responded to by blinking back the code. It is handy to know your Television, Video, Satellite Receiver or Cable Box code for future reference. Remember, you can only blink back your code after the ONE FOR ALL is operating your device.
To blink out your Television code:
1
2
3
4
5
6
Press TV. Press and hold MAGIC until the ONE FOR ALL 4’s red light blinks twice.
Press 9 9 0. The red light will blink twice.
For the first digit of your four-digit code, press 1 and count the red blinks.
If there are no blinks, the digit is "0".
For the second digit, press 2 and count the red blinks.
For the third digit, press 3 and count the red blinks.
For the fourth digit, press 4 and count the red blinks. Now you have your fourdigit code.
Make sure you write your Television code in the boxes provided in the battery compartment and on page 10 for easy future reference.
Important note: To blink back the code for your Video, Satellite or Cable Box, follow the instructions above only press VCR or SAT during step 1.
9