One for All URC-1030 User Manual

"Universal TV Remote"

		1
		Device
	Feature and Function
		Red Light
		(LED)
	Mute	Power
	Key
		Key
		Setup
		Key
		Channel
		& Volume
		Keys

Overview:

Step 1:

Step 2:

Step 3: Setting Up Your TV

Thank you for purchasing the

Installing the Batteries

Looking Up Your TV Code

1

Turn on your TV.

One For All® 1 Device universal

Your One For All ® 1 Device needs

1

remote control. Before you can

two (2) new AAA alkaline batteries.

Look at your TV to find

2

Press and hold SETUP until the One For All® 1 Device's red light

use your new remote control,

To install the batteries:

the brand name and write

blinks twice. Release SETUP.

you will need to program it.

1

On the back of

it in the space below:

SETUP

To do this, you need to tell the

the One For All ®

_____________________

How to Enter Codes

1 Device , unscrew

remote control what TV set

and push down on

3

Using the example

If your TV

Press

you wish to operate. This is

2

the tab and lift the

Find your TV

Set-Up Codes

shown on the right,

code is:

done by following these easy

2

cover off.

brand on the

enter the first four-digit

3

steps.

Match the

RCA

3124

code you wrote down.

Sony

1111

reverse side

3

batteries to the +

(See "Looking Up Your

of these

CH+

and - marks inside

TV Code".) If you put

Step 1:

instructions. The most

1

the battery case,

in the code correctly,

1

Install two (2) new AAA

popular codes are listed first.

then insert the

the red light will blink

VOL

batteries.

batteries.

Write your codes here:

twice.

2

3

Press the battery

Step 2:

cover back into

VOL

place and replace

2

Find the code for your

the screw.

4

CH_

TV on the reverse side of

4

4

these instructions.

Test the unit by

4

1 Device at your TV and press POWER.

POWER

pressing POWER.

Aim the One For All®

Step 3:

The red light

Your TV should turn off. If it doesn't, repeat Steps 2-4, trying

should blink.

POWER

each code listed for your brand until you find the one that operates

Enter the code.

Even if your batteries die, the One For

your TV.

All® 1 Device built in memory back-up

You will need one of these codes

will save your programmed setup

to program your One For All ® 1

Step 4:

codes. The One For All® 1 Device will

also retain the memory for another 10

Device remote control.

Use your remote.

minutes once you have removed the

batteries to replace them.