OLYMPUS C-470 ZOOM DISASSEMBLY AND ASSEMBLY PROCEDURE V1R3
X-500 / C-470ZOOM / D-590ZOOM
B. DISASSEMBLY AND ASSEMBLY
PROCEDURE
[1] REMOVAL OF FRONT COVER, BACK COVER AND DECORATION BELT. B-2
[2] REMOVAL OF REAR OPERATION UNIT, LCD AND BATTELY COVER ....... B-3
[3] REMOVAL OF MAIN CBA, PW CBA, LCD CBA, LENS UNIT AND
FLASH UNIT ................................................................................................... B-4
[4] DISASSEMBLY OF MAIN CBA, PW CBA, LCD CBA, LENS UNIT AND
FLASH UNIT ................................................................................................... B-5
[5] DISASSEMBLY OF CCD UNIT ....................................................................... B-5
[6] ASSEMBLY OF BARRIER UNIT ..................................................................... B-6
B- 1 Ver. 1
B. DISASSEMBLY AND ASSEMBLY PROCEDURE
X-500 / C-470ZOOM / D-590ZOOM
[1] REMOVAL OF FRONT COVER , REAR COVER AND DECORATION BELT
Disassembly perform as follows and assembly perform by reversing the disassembly steps.
Be sure to discharge the main capacitor, then continue to disassembling.
! Beware of electric shock !
Danger of electric shock.
Use a discharging tool to remove
the electrical charge before working.
7
4
7
23
5
1
Notice
The lead free solder is applied to this product.
!
Use the lead free solder in working.
9
8
1. Screw x 2 PUK1.6-240SN
2. Screw x3 PUTB1.6-240SN
3. Tripod Plate
4. Screw x 2 PUTB1.6-240SN
5. Barrier Unit
6. Connector
7. Screw x5 PUTB1.6-240SN
8. Back Cover
9. Decoration Belt
6
Ver.1 B-2
Discharge point !
Loading...