1.Change of Battery Terminal ........................................................................E-2
2.Change of Firmware ...............................................................................E-3, 4
3. Countermeasure of Mounting Strap comes off...........................................E-5
4. Countermeasure of Battery Contacts .........................................................E-6
5. Change of shape the FT Gear 1 and Knob Dial
(To be common with C-2020ZOOM)...........................................................E-7
6. Change the new Lens # and Finder #
(To be common with C-2020ZOOM)...........................................................E-8
7. Countermeasure of Power switch..........................................................E-9,10
8. Countermeasure of Mounting Strap comes off.........................................E-11
9. Correction of parts number.......................................................................E-12
E-1Ver.1/Rev.9
Page 2
E. NOTICE OF MODIFICATIONC-2000ZOOM
SUBJECTChange of Battery Terminal1999.09.10
DESCRIPTION: Change the thick of battery terminal (VE084200).
OLDNEW
0.3 +/- 0.015 mm0.25 +/- 0.015 mm
Note 1: The repair parts we provide are all new .
2: Two pieces of terminal (VE084200) must be changed.
REASON
This is a modification for customers who complain that it is hard to close the battery cover.
Please cope with not all customers but some customers who complain like above thing.
REMARKS
Serial number of products which have been modified.
C-2000Z(J)Japanese model56111001 or later
C-2000Z(E)Europian model55103301 or later
C-2000Z(U)American model54102701 or later
C-2000Z(G)57100001 or later
Serial number
56304001 or later
55500001 or later
(except from 54110001 to 54114000)
54500001 or later
SUBJECTChange of Firmware1999.09.10
SERVER_DISE-2Ver.1
Page 3
C-2000ZOOM
DESCRIPTION: Change of firmware. OLD NEW
8bitmiconD78062GC-A06D78062GC-A13
FirmwareNTSCV951-80V951-81
PALV951-79V951-80
REASON
Change of firmware due to improve the matching for 8bitmicon and firmware.
Contents of Improvement]
[
(1)To revise the indication which is not changed during quick photograph mode.
(2)To revise the set of stand which is canceled and opened when it is long shutter speed with TFT-LCD off mode.
(3)To add unknown mode of photograph mode.
(4)To revise the orange LED turning on and off in case of not-strobo photographing with slow shutter speed mode .
T o revise the orange LED turning on and off in case of strobo photographing with slow synchro mode and slow
Shutter speed mode.
(5)To revise the mode which is not turn on the power during sleep mode after 4 hours.
Above (1)(2)(3)(4)(5) are correspondence with using only new 8bitmicon.
(6)To revise the file size which might have over the largest size.
It is matching in spite of any 8bitmicon.
REMARKS
Serial number of products which have been modified.
C-2000Z (J)Japanese model56329901~
C-2000Z (E)European model55300001~
C-2000Z (U)American model54524001~
C-2000Z (G)Others57102401~
Matching for 8bitmicon and firmware
NTSC V951-81
PAL V951-80
New 8bitmicon
Serial number
56704001~
55518001~
57300001~
NTSC V951-80
PAL V951-79
0
x
8bitmicon
*1 Matching for old 8bitmicon and new firmware is improved only above (6).
Ver.1E-3
0 *10
Page 4
E. NOTICE OF MODIFICATIONC-2000ZOOM
SUBJECTChange of Firmware1999.09.10
Recognition of 8bitmicon (SY-1 Circuit Board)
Please recognize print number of SY-1 circuit board (8bit micon: IC301).
Indication of old Ver.: D78062GC-A06
Indication of new Ver.: D78062GC-A13
Recognition of repair
Please mark recognition of repair on below position when the 8bitmicon and the rewriting firmware are changed.
Please refer to D-3 for a procedure of rewriting firmware. Please check and execute the rewriting firmware
besides above new one that is returned from the market. (It is not necessary to mark with only the rewriting
firmware.)
Attention: Please mark recognition of 8bit micon in case of SY-1 circuit board is changed in repair.
Spare parts are running change.
SERVER_DISE-4Ver.1
Page 5
C-2000ZOOM
SUBJECTCountermeasure of Mounting Strap comes off1999.08.31
PHENOMENON: MOUNTING STRAP comes off.
REASON: Due to the mounting strap has put on diagonally, it was come off with leak force.
Contents of improvement:
Mounting strap and screw tap is glued “rock-tight”(OT1983).
This is an object in protecting drop of the camera body in case of mounting strap is rotated.
Please cope with all non-countermeasure products that return from the market.
Please refer to following.
In distinction from modified or not, please check the white marks inside of tripod stand.
GLUE: OT1983 (Rock-Tight)
QUANTITY: B2 level (Ball of 2mm in diameter)
POSITION: Screw tap
REMARKS
Serial number of products which have been modified.
Serial number
C-2000Z (J)Japanese model56130951 or later
56700051 or later
C-2000Z (E)European model55300001 or later
55520001 or later
C-2000Z (U)American model54302001 or later
54528001 or later
C-2000Z (G)57300001 or later
SUBJECTCountermeasure of Battery Contacts1999.12.3
Ver.1E-5
Page 6
E. NOTICE OF MODIFICATIONC-2000ZOOM
DESCRIPTION: 1.Plating the Terminal J,B (VE084500) by metal: Parts No. is no change
2.Change the shape of Terminal J,A(VE084400): Parts No. changes to VE204400
3.Change the shape of Lever CB(VE084600): Parts No. is no change
4.Add the Spacer Cover BATT: Parts No. is VE204500
5.Change the component parts of COMPL, COVER BATERY (VC114500) due to
above matters: Parts No. is no change
Parts No.
Terminal J,B
Terminal J,A
OLD
Non plated (Lustrous)
Parts No. : VE084400
Plated (Half Lustrous)
Parts No. : VE204400
NEW
Lever CB
Spacer Cover BATT
COMPL, COVER BATTERY
Assembled by old parts
(above #1 to #3 ) and
No Rib
Non
Ribbed
Add under the Terminal J,B
Assembled by new parts
(above #1 to #4)
No Spacer Cover BATT
REASON : This is a modification for reducing the contact resistance when insert the batteries
REMARKS
1. Correspond to service
Supplying new VC114500 at no charge. Please replace VC114500 to new with no modified units of all
customers repairs.
Service Parts : No longer supply and use old parts.
2.Serial number of products which have been modified as follows.
Serial number
C-2000Z(J)Japanese modelNo modefied products
C-2000Z(E)Europian model55701043 or later
C-2000Z(U)American modelNo modefied products
C-2000Z(G)57700001 or later
SERVER_DISE-6Ver.1
Page 7
C-2000ZOOM
SUBJECT
Change of shape the FT Gear 1 and Knob Dial
(To be common with C-2020ZOOM)
DESCRIPTION:
Changing the shape of FT Gear 1 and Knob Dial
Identification of type is almost impossible with parts shape.
Parts Name
FT Gear 1
Knob Dial
OLD
VE083900
VE085200
REASON:
Improved the easiness of assemble and function accuracy
1999.12.3
NEW
VE083901
VE085201
REMARKS:
1. Compatible Table
Parts NO.C-2000ZOOMC-2020ZOOM
VE083900OKNO
VE083901OKOK
VE085200OKNO
VE085201OKOK
2. Parts Supply
Old parts will be gradually changed with new parts. (Running change)
Ver.1E-7
Page 8
E. NOTICE OF MODIFICATIONC-2000ZOOM
SUBJECT
Change the Lens # and Finder #
(To be common with C-2020ZOOM)
DESCRIPTION:
1. Changing the Lens # and Finder # to be common with C-2020ZOOM.
2. Delete the Finder Spring
Parts Name
Lens #
Finder #
Finder Spring
OLD
VJ132000
VJ133000
VE121900
(VJ133000 must required
this spring)
REASON:
Reduce the cost and improved the easiness of assemble
3. Parts Supply
VJ132000 and VJ133000 will be gradually changed with new parts. (Running change)
SERVER_DISE-8Ver.1
Page 9
C-2000ZOOM
SUBJECTCountermeasure of Power switch2000.4.25
[Content]
There is no feeling about click when pressing power bottom.
The power is automatically on / off.
[Cause]
The double side tape (VC11500_ADHESIVE TAPE H) under flexible PWB (a part of terminal PW SW) is so thin that
the terminal PW SW (DY255400) is turned over.
[Product]
The double side tape has already improved thick tape.
(The color of tape has changed white to transparent. )
[Method of repair]
Would you deal with 1) or 2) to only customers who have problem about power switch?
1)Change VC933400_ASSY,UNIT,FLEXIBLE PWB and VC115000_ADHESIVE TAPE H
2)Change DY255400_terminal PW SW , XT017600_PW SW terminal tape and VC115000_ADHESIVE
TAPE H
DY255400_terminal PW SW , XT017600_PW SW terminal tape are added as a repair part.
Rev.5
Ver.1E-9
Page 10
[Method for checking serial no.]
E. NOTICE OF MODIFICATIONC-2000ZOOM
Modified
C-2000Zoom
(JAPAN market)
C-2000Zoom
(EUROPA market)
C-2000Zoom
(USA market)
C-2000Zoom(OTHERS)
NTSC
C-2000Zoom(OTHERS)
PAL
56111001 or later
56317241 or later
56700001 or later
55109601 or later
55300001 or later
55503684 or later
54113361 or later
54302001 or later
54508396 or later
58100001 or later
58300601or later
57101121 or later
57300001 or later
Rev.5
SERVER_DISE-10Ver.1
Page 11
C-2000ZOOM
SUBJECTCountermeasure of Mounting Strap comes off2001.11.28
PHENOMENON:
MOUNTING STRAP comes off.
REASON:
MOUNTING STRAP comes off by the union part of MOUNTING STRAP and FRONT COVER
becoming loose due to lack of the installation strength.
Contents of improvement:
The design of union part of MOUNTING STRAP and FRONT COVER has been changed.
Replace MOUNTING STRAP and FRONT COVER on customer complaint unit to the
countermeasure parts.
REMARKS:
Addition: Cabinet Front, Cover Front, Mounting Strap L&R and Screw
*New parts are in
compatible with OLD parts.
OLD parts supply will be stopped as soon as the stock of OLD parts used up.
OLDNEW
VE086900 CABINET FRONT
VE087000 COVER FRONT
VE123100 CABINRT FRONT B
VE123200 COVER FRONT B
VE087200 MOUNTING STRAPVE207600 MOUNTING STRAP L
VE207700 MOUNTING STRAP R
VE203200 HOLDER STRAP
VC265200 SPECIAL SCREWVC271800 SPECIAL SCREW
Old Cabinet Front Assy will be gradually changed with new parts.
(Running change : Same part number)
Rev.6
Ver.1E-11
Page 12
E. NOTICE OF MODIFICATIONC-2000ZOOM
SUBJECTCorrection of parts number2002.12.6
[Content]
Corrected the following parts number because of error in writing
oldnew
GEARVE083900
CAM GEAR SHAFTVE083955
VE083901
VE083900
Rev.9
SERVER_DISE-12Ver.1
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.