Telematic Control Unit Gen2K .................................. 1-7
1. Introduction
HOW TO USE THIS MANUAL
This manual uses special words, symbols,
icons and illustrations organized by function.
Please refer to the following items and
familiarize yourself with them.
FOR SAFE OPERATION
WARNING
This is used to indicate the presence
of a hazard that could cause death or
serious personal injury. To avoid or
reduce the risk, the procedures must
be followed precisely.
CAUTION
This is used to indicate the presence
of a hazard that could cause minor or
moderate personal injury or damage
to your vehicle. To avoid or reduce the
risk, the procedures must be followed
carefully.
NOTE:
Indicates items that help you understand and maximize the performance of
your vehicle. If ignored, they may lead to
a malfunction or poor performance.
REFERENCE SYMBOLS
INFO:
This indicates information that is necessary for efficient use of your vehicle or
accessories.
Reference page:
This indicates the title and page that you
should refer to.
<>:
Indicates a button on the control panel.
[]:
This indicates a key/item displayed on the
screen.
Voice Command:
This indicates an operation by voice
command.
SCREEN ILLUSTRATIONS
. The illustrations in this manual are
representatives of various models
and may not be identical with the
design and specifications of your vehicle.
. Icons and menu items displayed on
the screen may be abbreviated or
omitted from the screen illustrations
when appropriate. The omitted icons
and menu items are described as
dotted lines as illustrated.
1-2
. To operate the system, first park
the vehicle in a safe location and
set the parking brake. Operating
the system while driving can distract the driver and may result in a
serious accident.
. Exercise extreme caution at all
times so full attention may be
given to vehicle operation. If the
system does not respond immediately, please be patient and keep
your eyes on the road. Inattentive
driving may lead to a crash resulting in serious injuries or death.
. Do not rely on route guidance (if so
equipped) alone. Always be sure
that all driving maneuvers are
legal and safe in order to avoid
accidents.
. Do not disassemble or modify this
system. If you do, it may result in
accidents, fire or electrical shock.
. If you notice any foreign objects in
the system hardware, spill liquid
on the system or notice smoke or a
smell coming from it, stop using
the system immediately and it is
recommended you contact a
NISSAN dealer. Ignoring such conditions may lead to accidents, fire
or electrical shock.
1. Introduction
SAFETY INFORMATION
This system is primarily designed to help
you support pleasant driving as outlined
in this manual. However, you, the driver,
must use the system safely and properly.
Information and the availability of services
may not always be up to date. The system
is not a substitute for safe, proper and
legal driving.
Before using the system, please read the
following safety information. Always use
the system as outlined in this manual.
WARNING
CAUTION
. Some jurisdictions may have laws
limiting the use of video screens
while driving. Use this system only
where it is legal to do so.
. Extreme temperature conditions
[below −4°F (−20°C) and above
158°F (70°C)] could affect the performance of the system.
. The display screen may break if it
is hit with a hard or sharp object. If
the display screen breaks, do not
touch it. Doing so could result in an
injury.
NOTE:
Do not keep the system running with
the engine or the hybrid system
stopped. Doing so may discharge the
vehicle battery (12V battery). When you
use the system, always keep the engine
or the hybrid system running.
1-3
1. Introduction
REGULATORY INFORMATION
LASER PRODUCT
Complies with 21 CFR 1040.10 and 1040.11
Complies with 21 CFR Chapter 1, Subchap-
ter J
WARNING
Use of controls or adjustments or
performance of procedures other
than those specified herein may result
in hazardous radiation exposure.
including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le
fonctionnement.
BLUETOOTH® DEVICES
FCC Regulatory information
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
This device complies with part 15 of the
FCC Rules and Industry Canada licenseexempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference received,
1-4
TRADEMARKS
Apple, iPhone®, iPod®, and iPod touch® are
trademarks of Apple Inc., registered in the
U.S. and other countries. Apple CarPlay
is a trademark of Apple Inc. Use of the
Apple CarPlay
user interface meets Apple performance
standards. Apple is not responsible for the
operation of this vehicle or its compliance
with safety and regulatory standards.
Please note that the use of this product
with iPhone® or iPod® may affect wireless
performance.
Bluetooth® is a trademark owned by
Bluetooth SIG, Inc. and licensed to Robert
Bosch GmbH.
TM
logo means that a vehicle
TM
1. Introduction
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents
see http://dts.com/patents. HD Radio,
Artist Experience, and the HD, HD Radio,
and "ARC" logos are registered trademarks or trademarks of iBiquity Digital
Corporation in the United States and/or
other countries.
NISSAN is offering SiriusXM® services (SiriusXM® Audio, SiriusXM Traffic
TM
, SiriusXM® Travel Link) for free during initial
trial period.
SiriusXM® services require a subscription
after trial period and are sold separately
or as a package. The satellite service is
available only in the 48 contiguous USA
and DC. SiriusXM® satellite service is also
available in Canada; see www.siriusxm.ca.
SiriusXM® Satellite Radio subscription
(Audio Services) is sold separately or as a
package, and is continuous until you call
SiriusXM® to cancel. See SiriusXM® Customer Agreement for complete terms at
siriusxm.com. For more information, call
Listener Care at 1-877-447-0011 or visit
siriusxm.com.
SiriusXM® Satellite Radio and SiriusXM
TM
Traffic
subscriptions are sold separately
or as a package, and are continuous until
you call SiriusXM® to cancel. See SiriusXM®
Customer Agreement for complete terms
at www.siriusxm.com. SiriusXM® Travel
Link is available in select markets. For
more information, call Listener Care at 1877-447-0011 or visit siriusxm.com/traffic.
SiriusXM® Satellite Radio and SiriusXM®
Travel Link subscriptions are sold separately or as a package, and are continuous
until you call SiriusXM® to cancel. See
SiriusXM® Customer Agreement for complete terms at www.siriusxm.com.
SiriusXM® Travel Link is available in select
markets. For more information, call
Listener Care at 1-877-447-0011 or visit
siriusxm.com/travellink.
App Store
Apple and the Apple logo are trademarks
of Apple Inc., registered in the U.S. and
other countries. App Store is a service
mark of Apple Inc.
Siri®
Siri is a trademark of Apple Inc., registered
in the U.S. and other countries.
Google Play
TM
Google, Google Play are trademarks of
Google Inc.
TM
Google
Google is a trademark of Google Inc.
1-5
1. Introduction
Driving is serious business and requires your full attention. Only use
features and connected devices when
safe and legal to do so. Some features,
including automatic crash notification
and SOS (if so equipped), are dependent upon the telematics device being
in operative condition, its ability to
connect to a wireless network, compatible wireless network availability,
navigation map data and GPS satellite
signal receptions, the absence of
which can limit or prevent the ability
to reach the NissanConnect® Services
Data Center and NissanConnect® Services Response Center or receive support. GPS mapping may not be
detailed in all areas or reflect current
road status. Never program GPS while
driving. Only use Remote Engine
Start/Stop (if so equipped) and Remote Horn & Lights (if so equipped)
features in accordance with any laws,
rules or ordinances in effect in your
vehicle’s location.
Feature availability is dependent on vehi-
cle model, trim level, packaging and options. Compatible connected device may
be required and feature availability may
be dependent on device’s capability. Refer
to connected device’s owner’s manual for
details. Late availability for some features.
Some services and features are provided
by independent companies not within
NISSAN’s control. Should service provider
terminate or restrict service or features,
service or features may be suspended or
terminated without notice or with no
liability to NISSAN or its partners or agents.
Services and features may require compatible cellular network provided by independent companies not within NISSAN
or its partners’ or agents’ control. Cellular
network signal strength may vary and
may not be available in all areas or at all
times. Services and features may not
function if cellular network is unavailable,
restricted, or terminated. NISSAN and its
partners or agents are not responsible for
associated costs or other third party
changes that may be required for continued operation due to cellular network
unavailability, restriction, or termination
(including equipment replacements/upgrades, if available, or roaming charges
on alternative networks). Technology is
evolving, and changes by independent
companies are not within NISSAN’s or its
partners’ or agents’ control.
Enrollment, owner consent, personal
identification number (PIN), and subscription agreement may be required to receive full suite of features and services.
Trial periods (if applicable) begin on the
date of vehicle purchase or lease of a new
NISSAN. Trial periods may be subject to
change at any time and may be subject to
early termination without notice. Required
subscriptions may be sold separately for
each available feature or service after trial
period ends, and may continue until you
call service provider to cancel. Installation
costs, one-time activation fee, other fees
and taxes may apply. Fees and programming subject to change. Feature may be
subject to age restrictions in some areas.
Subscriptions governed by service provider’s subscription agreement, terms and
conditions and privacy statements available at service provider’s website. Text
rates or data usage may apply.
The NISSAN names, logos and slogans are
trademarks owned by or licensed to
Nissan Motor Co. Ltd. or its North American subsidiaries. Other trademarks and
trade names are those of their respective
owners.
For important safety information, system
limitations, and additional operating and
LEGAL DISCLAIMER
WARNING
1-6
A. INTRODUCTION
This product Telematic Control Unit
Gen2K incorporates the following software:
(1) the software developed by, or developed for, Ficosa International, S.A. (“Ficosa”),
(2) the software owned by third party and
licensed to Ficosa,
(3) the software licensed under the GNU
GENERAL PUBLIC LICENSE, Version 2
(“GPL”),
(4) the software licensed under the GNU
LIBRARY GENERAL PUBLIC LICENSE, Version 2.0 or the GNU LESSER GENERAL
PUBLIC LICENSE, Version 2.1 (collectively
“LGPL”), the Mozilla Public license v2
(“MPL”), the GPL-2.0 license withOpenSSL-exception (“GPLOpenSSL”) and
GNU GENERAL PUBLIC LICENSE, Version 3
with GCC exception (together with the
(5) open sourced software licensed under
terms and conditions other than Copyleft
Software.
For the software classified as (3) or (4)
above, a copy of the license text is
included with the source code in the URL
indicated below, and please also refer to
the terms and conditions of Copyleft
Software licenses at the websites listed
below:
GPL: http://www.gnu.org/licenses/oldlicenses/gpl-2.0.html and https://www.
gnu.org/licenses/gpl-3.0.en.html
LGPL: http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html and http://www.
gnu.org/licenses/old-licenses/lgpl-2.0.
html
feature information, see dealer, owner’s
manual, or www.nissanusa.com/
connect/important-information.
LICENSES
SOFTWARE LICENSES
Open Source Software Licenses
http://oss.bosch-cm.com/nissan.html
TELEMATIC CONTROL UNIT
GEN2K
1-7
1. Introduction
above are copyrighted by multiple people.
Please refer to the websites below regard-
ing the copyright notices of those people.
https://www.ficosa.com/software/
opensource/
The software licensed under the licenses
indicated in (3) and (4) above (“Copyleft
Software”) is distributed in the hope that it
will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
For at least three (3) years from delivery of
a device embedding the above product,
Ficosa will give to any third party who
contacts us at the Contact Information
provided below, for a charge no more
than our cost of physically performing
source code distribution, a complete machine-readable copy of the source code
corresponding to the Copyleft Software
indicated above. When requesting this
source code, please specify Product: Telematic Control Unit Gen2K and version Cx9.
Furthermore, source code and licenses
corresponding to the Copyleft Software
listed above is freely available to you and
any member of the public at the website
listed below:
https://www.ficosa.com/software/
opensource/
[Contact Information]
For enquiries about open source software
at FICOSA, please contact Ficosa’s Compliance Officer by email: FOSS@ficosa.com
Please note that we are unable to answer
any queries regarding source code details,
etc.
In addition, it is necessary for end users to
provide their own internet connection.
The end user is responsible for any connection or line charges incurred through
browsing websites or downloading.
B. LICENSING AND COPYRIGHT NOTICE
INFORMATION
The software classified as (5) above contains various open sourced software
(“OSS”) listed in the below website. Please
see the website indicted next for the
terms and conditions of the licenses
(OSS Licenses) and other information
regarding the OSS contained this Product:
https://www.ficosa.com/software/
opensource/
1-8
2 Getting started
Control buttons and touch screen display .............. 2-2
Control panel (Type A) (if so equipped) ................ 2-2
Control panel (Type B) (if so equipped) ................ 2-4
Control panel (Type C) (if so equipped) ................ 2-5
Control panel (Type D) (if so equipped) ................ 2-6
Control panel (Type E) (if so equipped) ................. 2-7
Language setting ............................................................. 2-31
Units settings ....................................................................... 2-31
Keyboard type settings ............................................... 2-31
Return all settings to default .................................. 2-31
2. Getting started
CONTROL BUTTONS AND
TOUCH SCREEN DISPLAY
CONTROL PANEL (Type A) (if so equipped)
Models with navigation system
Models without navigation system
<>:
Push to eject a CD.
“Compact Disc (CD) player”
(page 3-25)
<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
<MAP> (models with navigation sys-
tem):
Push to display the current location
map.
“Navigation screen” (page 6-3)
<>:
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be displayed.
“Selecting audio source”
(page 3-17)
2-2
2. Getting started
<VOLUME/>:
Push to turn the audio system on/off.
Turn to adjust the volume.
CD slot:
Insert a CD into the slot.
“Compact Disc (CD) player”
(page 3-25)
<>/<>:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
<BACK>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
<TUNE·SCROLL/OK>:
When a menu screen is displayed, turn
the dial to select items on the screen.
Push to confirm the selected item or
setting.
The button can also be used for audio
operations.
“Audio operations” (page 3-17)
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
<> (models without navigation
system):
Push to display the phone screen.
“4. Hands-Free Phone”
2-3
2. Getting started
CONTROL PANEL (Type B) (if so equipped)
<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
<>:
Push to display the phone screen.
“4. Hands-Free Phone”
<>:
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be displayed.
“Selecting audio source”
(page 3-17)
<VOL/>:
Push to turn the audio system on/off.
Turn to adjust the volume.
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
2-4
(page 2-17)
<>/<>:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
<BACK>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
<TUNE·SCROLL/SOUND>:
When a menu screen is displayed, turn
the dial to select items on the screen.
Push to confirm the selected item or
setting.
The button can also be used for audio
operations.
“Audio operations” (page 3-17)
2. Getting started
CONTROL PANEL (Type C) (if so equipped)
<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be displayed.
“Selecting audio source”
(page 3-17)
<>/<>:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
<>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
<>:
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<VOL/>:
Push to turn the audio system on/off.
Turn to adjust the volume.
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
“7. Voice recognition”
2-5
2. Getting started
CONTROL PANEL (Type D) (if so equipped)
Models with navigation system
Models without navigation system
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
<VOL/>:
Push to turn the audio system on/off.
Turn to adjust the volume.
<> :
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<>/<>:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be displayed.
“Selecting audio source”
(page 3-17)
2-6
2. Getting started
<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
<MAP> (models with navigation system):
Push to display the current location
map.
“Navigation screen” (page 6-3)
<>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
<TUNE·SCROLL/SOUND>:
When a menu screen is displayed, turn
the dial to select items on the screen.
Push to confirm the selected item or
setting.
The button can also be used for audio
operations.
“Audio operations” (page 3-17)
<> (models without navigation
system):
Push to display the phone screen.
“4. Hands-Free Phone”
CONTROL PANEL (Type E) (if so equipped)
Models with navigation system
Models without navigation system
2-7
2. Getting started
<>:
Push to eject a CD.
“Compact Disc (CD) player”
(page 3-25)
<VOLUME/>:
Push to turn the audio system on/off.
Turn to adjust the volume.
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be displayed.
“Selecting audio source”
(page 3-17)
<>:
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<MAP> (models with navigation system):
Push to display the current location
map.
“Navigation screen” (page 6-3)
<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
CD slot:
Insert a CD into the slot.
“Compact Disc (CD) player”
(page 3-25)
<TUNE·SCROLL/OK>:
When a menu screen is displayed, turn
the dial to select items on the screen.
Push to confirm the selected item or
setting.
The button can also be used for audio
operations.
“Audio operations” (page 3-17)
<BACK>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
<>/<>:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
2-8
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
<> (models without navigation
system):
Push to display the phone screen.
“4. Hands-Free Phone”
LIQUID CRYSTAL DISPLAY
The display is a liquid crystal display and
should be handled with care.
WARNING
Never disassemble the display. Some
parts utilize extremely high voltage.
Touching them may result in serious
personal injury.
Characteristics of liquid crystal
display
. If the temperature inside the vehicle is
especially low, the display will stay
relatively dim or the movement of the
images may be slow. These conditions
are normal. The display will function
normally when the interior of the
vehicle has warmed up.
. Some pixels in the display are darker or
brighter than others. This condition is
an inherent characteristic of liquid
crystal displays, and it is not a malfunction.
. A remnant of the previous display
image may remain on the screen. This
screen burn is inherent in displays, and
it is not a malfunction.
. The screen may become distorted by
strong magnetic fields.
. Depending on the condition, bright-
ness may be adjusted automatically to
prevent the display from screen burning.
2. Getting started
Maintenance of display
To clean the display screen, use a dry, soft
cloth. If additional cleaning is necessary,
use a small amount of neutral detergent
with a soft cloth. Never spray the screen
with water or detergent. Dampen the
cloth first, then wipe the screen.
CAUTION
. Clean the display with the ignition
switch in the OFF position. If the
display is cleaned while the ignition switch is placed in the ON
position, unintentional operation
may occur.
. To clean the display, never use a
rough cloth, alcohol, benzine, thinner or any kind of solvent or paper
towel with a chemical cleaning
agent. They will scratch or deteriorate the panel.
. Do not splash any liquid, such as
water or car fragrance, on the
display. Contact with liquid will
cause the system to malfunction.
STEERING WHEEL SWITCHES (Type
A) (if so equipped)
Type A
Type B
<>:
Push the + or - side of the switch to
adjust the volume.
2-9
2. Getting started
<>/<>:
Use the switches for audio operations.
“Audio operations” (page 3-17)
<> (Back):
Push to go back to the previous
screen while operating the Voice
Recognition System. Push and hold
to end a voice recognition session.
<>/<>/<OK>:
Push <
command while operating the Voice
Recognition System.
Push <OK> to confirm the selected
item.
<> (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
When Apple CarPlay
Auto
this switch will start a Siri® or Talk to
Google voice control session.
If your iPhone® is connected to the invehicle system via Bluetooth®, Siri®
>/<> to select the voice
“Giving voice commands”
(page 7-2)
TM
is active, pushing and holding
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
TM
or Android
Eyes Free can be activated by pushing
and holding this switch without having to activate Apple CarPlay
“Siri® Eyes Free” (page 5-26)
<> :
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the conditions.
For details of the vehicle information display, refer to the vehicle Owner’s Manual.
2-10
TM
STEERING WHEEL SWITCHES (Type
.
B) (if so equipped)
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt <
command while operating the Voice
Recognition System.
Push <
lected item.
This switch can also be used for audio
operations.
<>:
Push the + or - side of the switch to
adjust the volume.
/> to select the voice
/> to confirm the se-
“Audio operations” (page 3-17)
2. Getting started
<> (Back):
Push to go back to the previous
screen while operating the Voice
Recognition System. Push and hold
to end a voice recognition session.
<> (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
Auto
is active, pushing and holding
TM
or Android
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the invehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without having to activate Apple CarPlay
TM
.
“Siri® Eyes Free” (page 5-26)
<> :
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the conditions.
For details of the vehicle information display, refer to the vehicle Owner’s Manual.
STEERING WHEEL SWITCHES (Type
C) (if so equipped)
</>:
Tilt <
command while operating the Voice
Recognition System.
/> to select the voice
Push <
/> to confirm the se-
lected item.
This switch can also be used for audio
operations.
“Audio operations” (page 3-17)
<SOURCE>:
Push to change the audio source on
the vehicle information display.
<>:
Push the + or - side of the switch to
adjust the volume.
<> (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
Auto
is active, pushing and holding
TM
or Android
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the in-
vehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without having to activate Apple CarPlay
TM
.
2-11
2. Getting started
“Siri® Eyes Free” (page 5-26)
<>:
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the conditions.
For details of the vehicle information display, refer to the vehicle Owner’s Manual.
STEERING WHEEL SWITCHES (Type
D) (if so equipped)
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt <
command while operating the Voice
Recognition System.
Push <
lected item.
This switch can also be used for audio
operations.
<>:
Push the + or - side of the switch to
adjust the volume.
/> to select the voice
/> to confirm the se-
“Audio operations” (page 3-17)
2-12
<> (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
Auto
this switch will start a Siri® or Talk to
Google voice control session.
If your iPhone® is connected to the invehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without having to activate Apple CarPlay
<>:
Push to answer a received call or to
end an active call.
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
is active, pushing and holding
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
“Siri® Eyes Free” (page 5-26)
“4. Hands-Free Phone”
“Phone screen” (page 4-3)
TM
or Android
TM
.
“Phone screen” (page 4-3)
2. Getting started
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the conditions.
For details of the vehicle information display, refer to the vehicle Owner’s Manual.
STEERING WHEEL SWITCHES (Type
E) (if so equipped)
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt <
command while operating the Voice
Recognition System.
/> to select the voice
Push <
lected item.
This switch can also be used for audio
operations.
<>:
Push the + or - side of the switch to
adjust the volume.
<> (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
When Apple CarPlay
Auto
this switch will start a Siri® or Talk to
Google voice control session.
If your iPhone® is connected to the invehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without having to activate Apple CarPlay
<>:
Push to answer a received call or to
/> to confirm the se-
“Audio operations” (page 3-17)
“Giving voice commands”
(page 7-2)
TM
is active, pushing and holding
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
“Siri® Eyes Free” (page 5-26)
TM
or Android
TM
.
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the conditions.
For details of the vehicle information display, refer to the vehicle Owner’s Manual.
2-13
2. Getting started
STEERING WHEEL SWITCHES (Type
F) (if so equipped)
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt <
command while operating the Voice
Recognition System.
Push <
lected item.
This switch can also be used for audio
operations.
<>:
Push the + or - side of the switch to
adjust the volume.
/> to select the voice
/> to confirm the se-
“Audio operations” (page 3-17)
<> (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
Auto
this switch will start a Siri® or Talk to
Google voice control session.
If your iPhone® is connected to the invehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without having to activate Apple CarPlay
<> :
Push to answer a received call or to
end an active call.
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
is active, pushing and holding
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
“Siri® Eyes Free” (page 5-26)
“4. Hands-Free Phone”
“Phone screen” (page 4-3)
2-14
TM
or Android
TM
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the conditions.
For details of the vehicle information display, refer to the vehicle Owner’s Manual.
USB (Universal Serial Bus) CONNECTION PORT AND AUX (auxiliary) INPUT JACK
WARNING
Do not connect, disconnect or operate
the USB device while driving. Doing so
.
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.
CAUTION
. Do not force the USB device into
the USB connection port. Inserting
the USB device tilted or up-sidedown into the port may damage
the port. Make sure that the USB
device is connected correctly into
the USB connection port.
. Do not grab the USB connection
port cover (if so equipped) when
pulling the USB device out of the
port. This could damage the port
and the cover.
. Do not leave the USB cable in a
place where it can be pulled unintentionally. Pulling the cable may
damage the port.
The vehicle is equipped with a USB connection port and an AUX input jack. When
connected, the in-vehicle audio system
can play audio contents from the compatible device.
The USB connection port and the AUX
input jack are located on the lower part of
the instrument panel.
2. Getting started
Media hub Type A
Media hub Type B
Media hub Type C
AUX (Auxiliary) input jack:
Connect an audio player that accepts
a 1/8 in (3.5 mm) TRS connector (such
as an MP3 player etc.) to play music.
USB connection port:
Connect a compatible device to play
media such as an iPod® or a USB
memory device.
Connect an iPhone® or an Android
phone to use Apple CarPlay
Android Auto
TM
.
TM
or
USB connection port (for USB Type-C
only):
Connect a compatible device to play
media such a USB memory device.
Connect an Android phone to use
Android Auto
TM
.
2-15
2. Getting started
INFO:
. Refer to your AUX and USB device
manufacturer’s owner information regarding the proper use and care of the
device.
. Cables made by Apple Inc. should be
used to connect electronic devices
marketed by Apple Inc.
. iPod® and iPhone® functions cannot
be operated if the device is connected
to the USB connection port (for USB
Type-C only)
.
STARTING SYSTEM
The system starts when the ignition
switch is placed in the ACC or ON position.
START-UP SCREEN (if so
equipped)
The start-up screen is displayed when the
ignition switch is placed in the ACC or ON
position.
After an animated start-up screen is
displayed, a message screen will be displayed. Touch [OK] after reading and
agreeing to the message displayed on
the screen. If you do not agree to the
message, some of the functions on the
system will be disabled.
NOTE:
Do not keep the system running with
the engine or the hybrid system
stopped. Doing so may discharge the
vehicle battery (12V battery). When you
use the system, always keep the engine
or the hybrid system running.
BASIC OPERATION
The system can be operated with the
touch panel as well as switches on the
control panel and the steering wheel.
This manual mainly describes the touch
panel operation.
SELECTING MENU FROM LAUNCH
BAR
Models with navigation system
2-16
2. Getting started
Models without navigation system
Various system functions can be accessed
by touching the items on the Launch Bar
which is displayed on most of the main
menu screens. (The Launch Bar does not
appear on some screens such as scrolled
map screen, keyboard screen, etc.)
Touch the item on the Launch Bar to
display the corresponding screens.
The items on the Launch Bar differ
according to which button on the control
panel is pushed.
The following menus are available on the
Launch Bar.
When pushing <MENU>:
Shortcuts for various functions are displayed.
Displayed items may vary depending on
models and specifications.
. [Phone]*
. [Info]
. [Audio]
. [MENU]
. [Map]
. [Connections]
. [Settings]
*: [Phone] will be replaced by [CarPlay]
when Apple CarPlay
be replaced by [
active.
When pushing <AUDIO>:
Shortcuts mainly for the audio functions
are displayed.
“Phone” (page 4-4)
“Information menu” (page 5-2)
“Audio operations” (page 3-17)
Touching [MENU] on the Launch Bar
will display the center page of the
HOME MENU screen.
“Displaying navigation screen”
(page 6-3)
“Connections settings”
(page 2-26)
“System settings” (page 2-23)
TM
is active, and it will
] when Android AutoTMis
“Selecting audio source” (page 3-17)
When pushing <MAP> (if so equipped):
Shortcuts mainly for the navigation functions are displayed.
“Launch Bar” (page 6-3)
TOUCH PANEL OPERATION
The system can be controlled mainly by
the touch panel operation.
The following operations are examples of
the touch panel operation.
The map operations are also available
with touch panel operation.
“Map operation” (page 6-5)
2-17
2. Getting started
. Touch
Touch the item on the screen to display the corresponding screen.
INFO:
Some keys function differently depending
on whether the key is touched briefly or
when it is being touched and held for a
few seconds.
. Swipe/Flick
Menu screen pages will skip to the
next page when swiped/flicked horizontally.
Some of the list screens can also be
scrolled by swiping/flicking on the
screen vertically.
MAIN SCREEN OPERATIONS
The following operations are generally
available on the various screen.
. Displaying previous screen
Touch [] to return to the screen
displayed previously.
. Horizontal scrolling
Touch [<] to scroll to the previous
page.
2-18
Loading...
+ 222 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.